Apposition of silica lamellae during growth of spicules in the demosponge Suberites domuncula: biological/biochemical studies and chemical/biomimetical confirmation

Recently it has been discovered that the formation of the siliceous spicules of Demospongiae proceeds enzymatically (via silicatein) and occurs matrix guided (on galectin strings). In addition, it could be demonstrated that silicatein, if immobilized onto inorganic surfaces, provides the template for the synthesis of biosilica. In order to understand the formation of spicules in the intact organism, detailed studies with primmorphs from Suberites domuncula have been performed. The demosponge spicules are formed from several silica lamellae which are concentrically arranged around the axial canal, harboring the axial filament composed of silicatein. Now we show that the appositional growth of the spicules in radial and longitudinal direction proceeds in the extracellular space along hollow cylinders; their surfaces are formed by silicatein. The extracellularly located spicules are surrounded by sclerocytes which are filled with both electron-dense and electron-poor vesicles; energy dispersive X-ray analysis/scanning electron microscopical studies revealed that the electron-dense vesicles are filled of silicon/silica and therefore termed silicasomes. The release of the content of the silicasomes into the hollow cylinder suggests that the newly formed silica lamella originate there; in addition the data are compatible with the view that the silicatein molecules, attached at the centripetal and centrifugal surfaces, mediate biosilica formation. In a chemical/biomimetical approach silicatein is linked onto the organic material-free spicules after their functionalization with aminopropyltriethoxysilane [amino groups]-poly(acetoxime methacrylate) [reactive ester polymer]-N(epsilon)-benzyloxycarbonyl L-lysine tert-butyl ester-Ni(II); finally His-tagged silicatein is immobilized. The matrix-bound enzyme synthesized a new biosilica lamella. These bioinspired findings are considered as the basis for a technical use/application/utilization of hollow cylinders formed by matrix-guided silicatein molecules for the biocatalytic synthesis of nanostructured tubes.     

Evagination of cells controls bio-silica formation and maturation during spicule formation in sponges

The enzymatic-silicatein mediated formation of the skeletal elements, the spicules of siliceous sponges starts intracellularly and is completed extracellularly. With Suberites domuncula we show that the axial growth of the spicules proceeds in three phases: (I) formation of an axial canal; (II) evagination of a cell process into the axial canal, and (III) assembly of the axial filament composed of silicatein. During these phases the core part of the spicule is synthesized. Silicatein and its substrate silicate are stored in silicasomes, found both inside and outside of the cellular extension within the axial canal, as well as all around the spicule. The membranes of the silicasomes are interspersed by pores of ≈ 2 nm that are likely associated with aquaporin channels which are implicated in the hardening of the initial bio-silica products formed by silicatein. We can summarize the sequence of events that govern spicule formation as follows: differential GENETIC READOUT (of silicatein) → FRACTAL ASSOCIATION of the silicateins → EVAGINATION of cells by hydro-mechanical forces into the axial canal → and finally PROCESSIVE BIO-SILICA POLYCONDENSATION around the axial canal. We termed this process, occurring sequentially or in parallel, BIO-INORGANIC SELF-ORGANIZATION.     

Histochemical and electron microscopic analysis of spiculogenesis in the demosponge Suberites domuncula.

The skeleton of demosponges is built of spicules consisting of biosilica. Using the primmorph system from Suberites domuncula, we demonstrate that silicatein, the biosilica-synthesizing enzyme, and silicase, the catabolic enzyme, are colocalized at the surface of growing spicules as well as in the axial filament located in the axial canal. It is assumed that these two enzymes are responsible for the deposition of biosilica. In search of additional potential structural molecules that might guide the mineralization process during spiculogenesis to species-specific spicules, electron microscopic studies with antibodies against galectin and silicatein were performed. These studies showed that silicatein forms a complex with galectin; the strings/bundles of this complex are intimately associated with the surface of the spicules and arranged concentrically around them. Collagen fibers are near the silactein/galectin complexes. The strings/bundles formed from silicatein/galectin display a lower degree of orientation than the collagen fibers arranged in a highly ordered pattern around the spicules. These data indicate that species-specific formation of spicules involves a network of (diffusible) regulatory factor(s) controlling enzymatic silica deposition; this mineralization process proceeds on a galectin/collagen organic matrix.     

Isolation of the silicatein-α interactor silintaphin-2 by a novel solid-phase pull-down assay

The skeleton of siliceous sponges consists of amorphous biogenous silica (biosilica). Biosilica formation is driven enzymatically by means of silicatein(s). During this unique process of enzymatic polycondensation, skeletal elements (spicules) that enfold a central proteinaceous structure (axial filament), mainly comprising silicatein, are formed. However, only the concerted action of silicatein and other proteins can explain the genetically controlled diversity of spicular morphotypes, from simple rods with pointed ends to intricate structures with up to six rays. With the scaffold protein silintaphin-1, a first silicatein interactor that facilitates the formation of the axial filament and, consequently, of the growing spicule was discovered. In this study, a new interactor has been identified by both a conventional yeast two-hybrid library screening and a newly established pull-down assay. For the latter approach, silicatein-α has been bioengineered to carry a Glu tag, which confers binding affinity to hydroxyapatite. After immobilization on a solid-phase matrix (hydroxyapatite), the Glu-tagged silicatein was used as bait for the identification of interactors. Both approaches revealed a 15 kDa polypeptide, and its identity was confirmed by matrix-assisted laser desorption ionization time-of-flight mass spectrometry. Colocalization of silintaphin-2 and silicatein-α within the axial filament and on the spicule surface was shown by immunohistological analyses. Subsequent autoradiography demonstrated the Ca(2+) binding affinity of this silicatein interactor. These findings indicate that both proteins operate in concert during spiculogenesis. Besides binding of calcium, silintaphin-2 shares several structural features with certain acidic, secreted extracellular matrix proteins that facilitate tissue mineralization in Metazoa. Hence, silintaphin-2 might mediate signal transduction during spiculogenesis or may play a more direct role during biosilica formation, in concert with silicatein.     

Formation of siliceous spicules in the marine demosponge <Emphasis Type="Italic">Suberites domuncula</Emphasis>

The siliceous skeleton of demosponges is constructed of spicules. We have studied the formation of spicules in primmorphs from Suberites domuncula. Scanning electron microscopy and transmission electron-microscopical (TEM) analyses have revealed, in the center of the spicules, an axial canal that is 0.3–1.6 m wide and filled with an axial filament. This filament is composed of the enzyme silicatein, which synthesizes the spicules. TEM analysis has shown that spicule formation starts intracellularly and ends extracellularly in the mesohyl. At the initial stage, the axial canal is composed only of silicatein, whereas membranous structures and fibrils (10–15 nm in width) can later also be identified, suggesting that intracellular components protrude into the axial canal. Antibodies against silicatein have been applied for Western blotting; intracellularly, silicatein is processed to the mature form (24 kDa), whereas the pro-enzyme with the propeptide (33 kDa) is detected extracellularly. Silicatein undergoes phosphorylation at five sites. Immunohistological analysis has shown that silicatein exists in the axial canal (axial filament) and on the surface of the spicules, suggesting that they grow by apposition. Finally, we have demonstrated that the enzymic reaction of silicatein is inhibited by anti-silicatein antibodies. These data provide, for the first time, a comprehensive outline of spicule formation.This work was supported by grants from the European Commission (SILIBIOTEC), the Deutsche Forschungsgemeinschaft, the Bundesministerium für Bildung und Forschung Germany (project: Center of Excellence BIOTECmarin) and the International Human Frontier Science Program.     

Magnetic resonance imaging of the siliceous skeleton of the demosponge Lubomirskia baicalensis

The skeletal elements (spicules) of the demosponge Lubomirskia baicalensis were analyzed; they are composed of amorphous, non-crystalline silica, and contain in a central axial canal the axial filament which consists of the enzyme silicatein. The axial filament, that orients the spicule in its longitudinal axis exists also in the center of the spines which decorate the spicule. During growth of the sponge, new serially arranged modules which are formed from longitudinally arranged spicule bundles are added at the tip of the branches. X-ray analysis revealed that these serial modules are separated from each other by septate zones (annuli). We describe that the longitudinal bundles of spicules of a new module originate from the apex of the earlier module from where they protrude. A cross section through the oscular/apical-basal axis shows that the bundle rays are organized in a concentric and radiate pattern. High resolution magnetic resonance microimaging studies showed that the silica spheres of the spicules in the cone region contain high amounts of 'mobile' water. We conclude that the radiate accretive growth pattern of sponges is initiated in the apical region (cones) by newly growing spicules which are characterized by high amounts of 'mobile' water; subsequently spicule bundles are formed laterally around the cones.     

Biosilica aging: From enzyme-driven gelation via syneresis to chemical/biochemical hardening

Background

The distinguished property of the siliceous sponge spicules is their enzyme (silicatein)-catalyzed biosilica formation. The enzymatically formed, non-structured biosilica product undergoes a molding, syneresis, and hardening process to form the species-specifically shaped, hard structured skeletal spicules. Besides of silicatein, a silicatein-associated protein, silintaphin-2, is assumed to be involved in the process of biosilica formation in vivo.

Methods

Biosilica has been synthesized enzymatically and determined quantitatively. In addition, the subsequent hardening/aging steps have been followed by spectroscopic and electron microscopic analyses.

Results

The young spicules, newly formed in sponge cell aggregates, comprise high concentrations of sodium (~ 1 w/w %) and potassium (0.3%). During aging the two alkali metals are removed from the spicules by 80%. In parallel, water is withdrawn from the biosilica deposits. A protein, the silicatein-α interactor silintaphin-2, comprises clusters rich in the anionic amino acids aspartic acid [D] and glutamic acid [E]. The very acidic peptide was found to significantly enhance silica polymerization. This peptide also caused a strong aggregation of silicatein/biosilica particles.

Conclusions

The observations are explained by sodium ion removal from the initially formed biosilica deposits to the acidic amino acids in silintaphin-2. The crucial amino acids facilitating/forcing the silicatein-mediated biosilica reaction are D and E.

General significance

The data presented here provide a reaction mechanism that at neutral pH the extent of biosilica formation can be strongly intensified by the removal of cations. The results contribute to an understanding of the structuring process taking place during the formation of the solid spicule rods.     

Silintaphin-1--interaction with silicatein during structure-guiding bio-silica formation

Silicateins are unique enzymes of sponges (phylum Porifera) that template and catalyze the polymerization of nanoscale silicate to siliceous skeletal elements. These multifunctional spicules are often elaborately shaped, with complex symmetries. They carry an axial proteinaceous filament, consisting of silicatein and the scaffold protein silintaphin-1, which guides silica deposition and subsequent spicular morphogenesis. In vivo, the synthesis of the axial filament very likely proceeds in three steps: (a) assembly of silicatein monomers to form one pentamer; (b) assembly of pentamers to form fractal-like structures; and finally (c) assembly of fractal-like structures to form filaments. The present study was aimed at exploring the effect of self-assembled complexes of silicatein and silintaphin-1 on biosilica synthesis in vitro. Hence, in a comparative approach, recombinant silicatein and recombinant silintaphin-1 were used at different stoichiometric ratios to form axial filaments and to synthesize biosilica. Whereas recombinant silicatein-α reaggregates to randomly organized structures, coincubation of silicatein-α and silintaphin-1 (molecular ratio 4 : 1) resulted in synthetic filaments via fractal-like patterned self-assemblies, as observed by electron microscopy. Concurrently, owing to the concerted action of both proteins, the enzymatic activity of silicatein-α strongly increased by 5.3-fold (with the substrate tetraethyl orthosilicate), leading to significantly enhanced synthesis of biosilica. These results indicate that silicatein-α-mediated biosilicification depends on the concomitant presence of silicatein-α and silintaphin-1. Accordingly, silintaphin-1 might not only enhance the enzymatic activity of silicatein-α, but also accelerate the nonenzymatic polycondensation of the silica product before releasing the fully synthesized biosiliceous polymer.     

Silicateins, silicatein interactors and cellular interplay in sponge skeletogenesis: formation of glass fiber-like spicules

Biomineralization processes are characterized by controlled deposition of inorganic polymers/minerals mediated by functional groups linked to organic templates. One metazoan taxon, the siliceous sponges, has utilized these principles and even gained the ability to form these polymers/minerals by an enzymatic mechanism using silicateins. Silicateins are the dominant protein species present in the axial canal of the skeletal elements of the siliceous sponges, the spicules, where they form the axial filament. Silicateins also represent a major part of the organic components of the silica lamellae, which are cylindrically arranged around the axial canal. With the demosponge Suberites domuncula as a model, quantitative enzymatic studies revealed that both the native and the recombinant enzyme display in vitro the same biosilica-forming activity as the enzyme involved in spicule formation in vivo. Monomeric silicatein molecules assemble into filaments via fractal intermediates, which are stabilized by the silicatein-interacting protein silintaphin-1. Besides the silicateins, a silica-degrading enzyme silicase acting as a catabolic enzyme has been identified. Growth of spicules proceeds in vivo in two directions: first, by axial growth, a process that is controlled by evagination of cell protrusions and mediated by the axial filament-associated silicateins; and second, by appositional growth, which is driven by the extraspicular silicateins, a process that provides the spicules with their final size and morphology. This radial layer-by-layer accretion is directed by organic cylinders that are formed around the growing spicule and consist of galectin and silicatein. The cellular interplay that controls the morphogenetic processes during spiculogenesis is outlined.     

Formation of giant spicules in the deep-sea hexactinellid <Emphasis Type="Italic">Monorhaphis chuni</Emphasis> (Schulze 1904): electron-microscopic and biochemical studies

The siliceous sponge Monorhaphis chuni (Hexactinellida) synthesizes the largest biosilica structures on earth (3 m). Scanning electron microscopy has shown that these spicules are regularly composed of concentrically arranged lamellae (width: 3–10 μm). Between 400 and 600 lamellae have been counted in one giant basal spicule. An axial canal (diameter: ~2 μm) is located in the center of the spicules; it harbors the axial filament and is surrounded by an axial cylinder (100–150 μm) of electron-dense homogeneous silica. During dissolution of the spicules with hydrofluoric acid, the axial filament is first released followed by the release of a proteinaceous tubule. Two major proteins (150 kDa and 35 kDa) have been visualized, together with a 24-kDa protein that cross-reacts with antibodies against silicatein. The spicules are surrounded by a collagen net, and the existence of a hexactinellidan collagen gene has been demonstrated by cloning it from Aphrocallistes vastus. During the axial growth of the spicules, silicatein or the silicatein-related protein is proposed to become associated with the surface of the spicules and to be finally internalized through the apical opening to associate with the axial filament. Based on the data gathered here, we suggest that, in the Hexactinellida, the growth of the spicules is mediated by silicatein or by a silicatein-related protein, with the orientation of biosilica deposition being controlled by lectin and collagen. Carsten Eckert was previously with the Museum für Naturkunde, Invalidenstrasse 43, 10115 Berlin, Germany. The collagen sequence from Aphrocallistes vastus reported here, viz., [COL_APHRO] APHVACOL (accession number AM411124), has been deposited in the EMBL/GenBank data base. This work was supported by grants from the European Commission, the Deutsche Forschungsgemeinschaft, the Bundesministerium für Bildung und Forschung Germany (project: Center of Excellence BIOTECmarin), the National Natural Science Foundation of China (grant no. 50402023), and the International Human Frontier Science Program.     

Analysis of the axial filament in spicules of the demosponge Geodia cydonium: different silicatein composition in microscleres (asters) and megascleres (oxeas and triaenes)

The skeleton of the siliceous sponges (Porifera: Hexactinellida and Demospongiae) is supported by spicules composed of bio-silica. In the axial canals of megascleres, harboring the axial filaments, three isoforms of the enzyme silicatein (-alpha, -beta and -gamma) have been identified until now, using the demosponges Tethya aurantium and Suberites domuncula. Here we describe the composition of the proteinaceous components of the axial filament from small spicules, the microscleres, in the demosponge Geodia cydonium that possesses megascleres and microscleres. The morphology of the different spicule types is described. Also in G. cydonium the synthesis of the spicules starts intracellularly and they are subsequently extruded to the extracellular space. In contrast to the composition of the silicateins in the megascleres (isoforms: -alpha, -beta and -gamma), the axial filaments of the microscleres contain only one form of silicatein, termed silicatein-alpha/beta, with a size of 25kDa. Silicatein-alpha/beta undergoes three phosphorylation steps. The gene encoding silicatein-alpha/beta was identified and found to comprise the same characteristic sites, described previously for silicateins-alpha or -beta. It is hypothesized, that the different composition of the axial filaments, with respect to silicateins, contributes to the morphology of the different types of spicules.     

Silicateins, the major biosilica forming enzymes present in demosponges: protein analysis and phylogenetic relationship

Silicateins are enzymes, which are restricted to sponges (phylum Porifera), that mediate the catalytic formation of biosilica from monomeric silicon compounds. The silicatein protein is compartmented in the sponges in the axial filaments which reside in the axial canals of the siliceous spicules. In the present study silicatein has been isolated from the freshwater sponge Lubomirskia baicalensis where it occurs in isoforms with sizes of 23 kDa, 24 kDa and 26 kDa. Since the larger protein is glycosylated we posit that it is a processed form of one of the smaller size forms. The silicatein isoforms are post-translationally modified by phosphorylation; at least four isoforms exist with pI's of 5.4, of 5.2, of 4.9 and of 4.7. Surprisingly silicatein not only mediates polymerization of silicate, but also displays proteolytic activity which is specific for cathepsin L enzymes, thus underscoring the high relationship of the silicateins to cathepsin L. The cDNAs from L. baicalensis for silicatein and cathepsin L, as well as the respective genes, were cloned. It was found that the five introns present in the sponge genes are highly conserved up to human cathepsin L. This analysis has been completed by sequencing of two silicatein genes (both for silicatein-alpha and -beta) and of cathepsin L from another demosponge, Suberites domuncula. A comprehensive phylogenetic analysis with these new sequences shed new light upon the evolution of cathepsin L and silicatein families which occurred at the base of the metazoan phyla. It is concluded, that in parallel with the emergence of these enzymes at first the number of introns increased, especially in the coding region of the mature enzyme. Later in evolution the number of introns decreased again. We postulate that modification of the catalytic triad, especially of its first amino acid, is a suitable target for a chemical modulation of enzyme function of the silicateins/cathepsin L.     

Axial growth of hexactinellid spicules: formation of cone-like structural units in the giant basal spicules of the hexactinellid Monorhaphis

The glass sponge Monorhaphis chuni (Porifera: Hexactinellida) forms the largest bio-silica structures on Earth; their giant basal spicules reach sizes of up to 3 m and diameters of 8.5 mm. Previously, it had been shown that the thickness growth proceeds by appositional layering of individual lamellae; however, the mechanism for the longitudinal growth remained unstudied. Now we show, that the surface of the spicules have towards the tip serrated relief structures that are consistent in size and form with the protrusions on the surface of the spicules. These protrusions fit into the collagen net that surrounds the spicules. The widths of the individual lamellae do not show a pronounced size tendency. The apical elongation of the spicule proceeds by piling up cone-like structural units formed from silica. As a support of the assumption that in the extracellular space silicatein(-like) molecules exist that associate with the external surface of the respective spicule immunogold electron microscopic analyses were performed. With the primmorph system from Suberites domuncula we show that silicatein(-like) molecules assemble as string- and net-like arrangements around the spicules. At their tips the silicatein(-like) molecules are initially stacked and at a later stay also organized into net-like structures. Silicatein(-like) molecules have been extracted from the giant basal spicule of Monorhaphis. Applying the SDS–PAGE technique it could be shown that silicatein molecules associate to dimers and trimers. Higher complexes (filaments) are formed from silicatein(-like) molecules, as can be visualized by electron microscopy (SEM). In the presence of ortho-silicate these filaments become covered with 30–60 nm long small rod-like/cuboid particles of silica. From these data we conclude that the apical elongation of the spicules of Monorhaphis proceeds by piling up cone-like silica structural units, whose synthesis is mediated by silicatein(-like) molecules.     

Acquisition of structure-guiding and structure-forming properties during maturation from the pro-silicatein to the silicatein form

Silicateins are the key enzymes involved in the enzymatic polycondensation of the inorganic scaffold of the skeletal elements of the siliceous sponges, the spicules. The gene encoding pro-silicatein is inserted into the pCold TF vector, comprising the gene for the bacterial trigger factor. This hybrid gene is expressed in Escherichia coli and the synthesized fusion protein is purified. The fusion protein is split into the single proteins with thrombin by cleavage of the linker sequence present between the two proteins. At 23 °C, the 87 kDa trigger factor-pro-silicatein fusion protein is cleaved to the 51 kDa trigger factor and the 35 kDa pro-silicatein. The cleavage process proceeds and results in the release of the 23 kDa mature silicatein, a process which very likely proceeds by autocatalysis. Almost in parallel with its formation, the mature enzyme precipitates as pure 23 kDa protein. When the precipitate is dissolved in an urea buffer, the solubilized protein displays its full enzymatic activity which is enhanced multi-fold in the presence of the silicatein interactor silintaphin-1 or of poly(ethylene glycol) (PEG). The biosilica product formed increases its compactness if silicatein is supplemented with silintaphin-1 or PEG. The elastic modulus of the silicatein-mediated biosilica product increases in parallel with the addition of silintaphin-1 and/or PEG from 17 MPa (silicatein) via 61 MPa (silicatein:silintaphin-1) to 101 MPa (silicatein:silintaphin-1 and PEG). These data show that the maturation process from the pro-silicatein state to the mature form is the crucial step during which silicatein acquires its structure-guiding and structure-forming properties.     

Poly(silicate)-metabolizing silicatein in siliceous spicules and silicasomes of demosponges comprises dual enzymatic activities (silica polymerase and silica esterase)

Siliceous sponges can synthesize poly(silicate) for their spicules enzymatically using silicatein. We found that silicatein exists in silica-filled cell organelles (silicasomes) that transport the enzyme to the spicules. We show for the first time that recombinant silicatein acts as a silica polymerase and also as a silica esterase. The enzymatic polymerization/polycondensation of silicic acid follows a distinct course. In addition, we show that silicatein cleaves the ester-like bond in bis(p-aminophenoxy)-dimethylsilane. Enzymatic parameters for silica esterase activity are given. The reaction is completely blocked by sodium hexafluorosilicate and E-64. We consider that the dual function of silicatein (silica polymerase and silica esterase) will be useful for the rational synthesis of structured new silica biomaterials.     

Biosilica‐loaded poly(ϵ‐caprolactone) nanofibers mats provide a morphogenetically active surface scaffold for the growth and mineralization of the osteoclast‐related SaOS‐2 cells

Bioprinting/3D cell printing procedures for the preparation of scaffolds/implants have the potential to revolutionize regenerative medicine. Besides biocompatibility and biodegradability, the hardness of the scaffold material is of critical importance to allow sufficient mechanical protection and, to the same extent, allow migration, cell–cell, and cell–substrate contact formation of the matrix‐embedded cells. In the present study, we present a strategy to encase a bioprinted, cell‐containing, and soft scaffold with an electrospun mat. The electrospun poly(?‐caprolactone) (PCL) nanofibers mats, containing tetraethyl orthosilicate (TEOS), were subsequently incubated with silicatein. Silicatein synthesizes polymeric biosilica by polycondensation of ortho‐silicate that is formed from prehydrolyzed TEOS. Biosilica provides a morphogenetically active matrix for the growth and mineralization of osteoblast‐related SaOS‐2 cells in vitro. Analysis of the microstructure of the 300–700 nm thick PCL/TEOS nanofibers, incubated with silicatein and prehydrolyzed TEOS, displayed biosilica deposits on the mats formed by the nanofibers. We conclude and propose that electrospun PCL nanofibers mats, coated with biosilica, may represent a morphogenetically active and protective cover for bioprinted cell/tissue‐like units with a suitable mechanical stability, even if the cells are embedded in a softer matrix.     

Bioorganic/inorganic hybrid composition of sponge spicules: matrix of the giant spicules and of the comitalia of the deep sea hexactinellid Monorhaphis

The giant basal spicules of the siliceous sponges Monorhaphis chuni and Monorhaphis intermedia (Hexactinellida) represent the largest biosilica structures on earth (up to 3m long). Here we describe the construction (lamellar organization) of these spicules and of the comitalia and highlight their organic matrix in order to understand their mechanical properties. The spicules display three distinct regions built of biosilica: (i) the outer lamellar zone (radius: >300 microm), (ii) the bulky axial cylinder (radius: <75 microm), and (iii) the central axial canal (diameter: <2 microm) with its organic axial filament. The spicules are loosely covered with a collagen net which is regularly perforated by 7-10 microm large holes; the net can be silicified. The silica layers forming the lamellar zone are approximately 5 microm thick; the central axial cylinder appears to be composed of almost solid silica which becomes porous after etching with hydrofluoric acid (HF). Dissolution of a complete spicule discloses its complex structure with distinct lamellae in the outer zone (lamellar coating) and a more resistant central part (axial barrel). Rapidly after the release of the organic coating from the lamellar zone the protein layers disintegrate to form irregular clumps/aggregates. In contrast, the proteinaceous axial barrel, hidden in the siliceous axial cylinder, is set up by rope-like filaments. Biochemical analysis revealed that the (dominant) molecule of the lamellar coating is a 27-kDa protein which displays catalytic, proteolytic activity. High resolution electron microscopic analysis showed that this protein is arranged within the lamellae and stabilizes these surfaces by palisade-like pillars. The mechanical behavior of the spicules was analyzed by a 3-point bending assay, coupled with scanning electron microscopy. The load-extension curve of the spicule shows a biphasic breakage/cracking pattern. The outer lamellar zone cracks in several distinct steps showing high resistance in concert with comparably low elasticity, while the axial cylinder breaks with high elasticity and lower stiffness. The complex bioorganic/inorganic hybrid composition and structure of the Monorhaphis spicules might provide the blueprint for the synthesis of bio-inspired material, with unusual mechanical properties (strength, stiffness) without losing the exceptional properties of optical transmission.     

Silica deposition in Demosponges: spiculogenesis in Crambe crambe

Transmission electron-microscopy images coupled with dispersive X-ray analysis of the species Crambe crambe have provided information on the process of silica deposition in Demosponges. Sclerocytes (megasclerocytes) lie close to spicules or surround them at different stages of growth by means of long thin enveloping pseudopodia. Axial filaments occur free in the mesohyl, in close contact with sclerocytes, and are triangular in cross section, with an internal silicified core. The unit-type membrane surrounding the growing spicule coalesces with the plasmalemma. The axial filament of a growing spicule and that of a mature spicule contain 50%-70% Si and 30%-40% Si relative to that contained in the spicule wall, respectively. The extracellular space between the sclerocyte and the growing spicule contains 50%-65%. Mitochondria, vesicles and dense inclusions of sclerocytes exhibit less than 10%. The cytoplasm close to the growing spicule and that far from the growing spicule contain up to 50% and less than 10%, respectively. No Si has been detected in other parts of the sponge. The megascleres are formed extracellularly. Once the axial filament is extruded to the mesohyl, silicification is accomplished in an extracellular space formed by the enveloping pseudopodia of the sclerocyte. Si deposition starts at regularly distributed sites along the axial filament; this may be related to the highly hydroxylated zones of the silicatein-alpha protein. Si is concentrated in the cytoplasm of the sclerocyte close to the plasmalemma that surrounds the growing spicules. Orthosilicic acid seems to be pumped, both from the mesohyl to the sclerocyte and from the sclerocyte to the extracellular pocket containing the growing spicule, via the plasmalemma.