Purification,Properties and Recognition Sequence of Site-specific Restriction Endonuclease from Acetobacter liquefaciens AJ 2881

A type II restriction endonuclease, designated as AliAJI, was purified from cells of Acetobacter liquefaciens AJ 2881 by combined column chromatography on heparin-Sepharose CL-6B, DEAE-Sepharose CL-6B and blue Sepharose CL-6B. The purified enzyme was homogeneous on polyacrylamide gel disc electrophoresis, and the enzyme preparation was free from other nuclease activities, as judged by constancy of lambda DNA-digest electrophoretic patterns after prolonged incubation for 24 hr. The enzyme was optimally active at 37°C at pH 7.5, required neither sodium chloride nor ammonium sulfate, both of which rather inhibited enzyme activity at high concentration (100 and 75 mM, respectively), and cleaved lambda, φX174 RF, SV40, pBR322, M13 mp7 RF and Ad2 DNAs at 18, 1,2, 1, 1 and 25 or more sites, respectively. The recognition sequence of the enzyme on DNA molecules was determined to be 5′-C-T-G-C-A-G-3′, and the enzyme was found to cut between A and G in the sequence, being an isoschizomer of the endonuclease of Providencia stuartii 164 (PstI).     

Purification and Characterization of Thermostable Purine Nucleoside Phosphorylase of Bacillus stearothermophilus JTS 859

A thermostable purine nucleoside phosphorylase has been purified more than 800-fold from Bacillus stearothermophilus JTS 859. The enzyme had a molecular weight of 68,000 consisting of 2 identical subunits (A/_w, 34,000). The isoelectric point of the enzyme was 4.7. The enzyme did not contain cysteine. The optimal pH of the enzyme reaction was from 7.5 to 11.0. The Michaelis constants for inosine, guanosine, 2′-deoxyinosine, and 2′-deoxyguanosine were 0.22, 0.14, 0.20, and 0.10mM, respectively. The optimal temperature of the reaction was 80 C. The half-life of the enzyme was 16 hr in 20mM potassium phosphate and ImM inosine (pH 7.0) at 80°C, and no decrease of the enzyme activity was observed at least for the first 30 hr at 70°C.     

Characterization of BflI – A Thermostable,Co++-Requiring Isoschizomer of BsiYI from Anoxybacillus Flavithermus

A thermophile, isolated from geothermal areas in the northern Himalayan region of India, was identified by partial 16S rDNA sequence (GenBank accession # AF482430) analysis as Anoxybacillus flavithermus. The isolate produced BflI (REBASE # 4910), a Type II restriction endonuclease, which recognized the sequence 5′-CCNNNNN/NNGG-3′ and was the isoschizomer of BsiYI. The enzyme was purified to homogeneity by passing through Cibacron Blue F3GA agarose, DEAE-cellulose, heparin-agarose and MonoQ FPLC. The purified enzyme (MW 36 kDa) worked best at 60 °C in Promega's buffer C and preferentially required Co⁺⁺(0.4 mM) as cofactor followed by Mg⁺⁺(10 mM) and Mn⁺⁺(1 mM). The enzyme showed high specific activity and worked in the presence of high concentrations of β-mercaptoethanol (200 mM), Triton-X-100 (25%), urea (30%), formamide (6%) and guanidine (40 mM) and showed no star activity in the presence of 40% glycerol. In the absence of any stabilizing agent, BflI retained t _1/2 for at least 96 h at 37 °C, 6 h at 60 °C and 6 months at 4 °C. N-terminal sequencing showed that its first 10 amino acid residues were DFHEDKTIAR. This revised version was published online in July 2006 with corrections to the Cover Date.     

Identification of Arsenobetaine as a Major Arsenic Compound in the Ivory Shell Buccinum striatissimum

A restriction endonuclease, designated as DmaI, was purified from cell-free extracts of Deleya marina IAM 14114 by streptomycin treatment, ammonium sulfate fractionation and two steps of chromatographies on heparin-Sepharose CL-6B and Mono Q (HR 5/5, FPLC). The purified enzyme was homogeneous on SDS-polyacrylamide gel disk electrophoresis and a ligation-recutting test. The relative molecular mass measurements of the purified enzyme gave 28,000 daltons by SDS-polyacrylamide gel disk electrophoresis and 56,000 daltons by gel filtration. These data indicated that the purified enzyme (56,000 daltons) has a dimeric structure composed of two 28,000-dalton subunits. The isoelectric point was 5.5. The purified enzyme worked best at 37°C in a reaction mixture (50 μl) containing 1.0 μg λDNA, 10 mm Tris–HCl, 7 mm 2-mercaptoethanol, 7 mm MgCl₂ and 100 mm NaCl (pH 7.5). The enzyme was stable up to 55°C and between pH 7.0 and 9.0. The purified enzyme recognizes the palindromic hexanucleotide DNA sequence 5′-CAGCTG-3′, cuts between G and C and produces a flush end (isoschizomer of PvuII).     

Purification and biochemical characterization of a broad substrate specificity thermostable alkaline protease from Aspergillus nidulans

Aspergillus nidulans PW1 produces an extracellular carboxylesterase activity that acts on several lipid esters when cultured in liquid media containing olive oil as a carbon source. The enzyme was purified by gel filtration and ion exchange chromatography. It has an apparent MW and pI of 37 kDa and 4.5, respectively. The enzyme efficiently hydrolyzed all assayed glycerides, but showed preference toward short- and medium-length chain fatty acid esters. Maximum activity was obtained at pH 8.5 at 40°C. The enzyme retained activity after incubation at pHs ranging from 8 to11 for 12 h at 37°C and 6 to 8 for 24 h at 37°C. It retained 80% of its activity after incubation at 30 to 70°C for 30 min and lost 50% of its activity after incubation for 15 min at 80°C. Noticeable activation of the enzyme is observed when Fe²⁺ ion is present at a concentration of 1 mM. Inhibition of the enzyme is observed in the presence of Cu²⁺, Fe³⁺, Hg²⁺, and Zn²⁺ ions. Even though the enzyme showed strong carboxylesterase activity, the deduced N-terminal amino acid sequence of the purified protein corresponded to the protease encoded by prtA gene.     

An Aminopeptidase of Aspergillus sojae

An aminopeptidase was purified from Aspergillus sojae X–816. The molecular weight of the enzyme was estimated to be 220,000. The isoelectric point was at pH 5.3. The optimum pH for l-leucylglycylglycine was 7.5. The enzyme was stable up to 37°C against temperature treatment for 15 min. Some chelating agents inhibited the enzyme activity. The Km value for l-leucylglycylglycine at pH 7.5 and 37°C was 45 mm. The Km value for l-leucyl-β-naphthylamide at pH 7.0 and 37°C was 2.2 mm.     

Purification and Characterization of a Thermostable Alkaline Protease from Alkalophilic Thermoactinomyces sp. H8682

Protease secreted into the culture medium by alkalophilic Thermoactinomyces sp. HS682 was purified to an electrophoretically homogeneous state through only two chromatograhies using Butyl-Toyopearl 650M and SP-Toyopearl 650S columns. The purified enzyme has an apparent relative molecular mass of 25, 000 according to gel filtration on a Sephadex G-75 column and SDS-PAGE and an isoelectric point above 11.0.

Its proteolytic activity was inhibited by active-site inhibitors of serine protease, DFP and PMSF, and metal ions, Cu²⁺ and Hg²⁺. The enzyme was stable toward some detergents, sodium perborate, sodium triphosphate, sodium-n-dodecylbenzenesulfonate, and sodium dodecyl sulfate, at a concentration of 0.1% and pH 11.5 and 37°C for 60 min. The optimum pH was pH 11.5–13.0 at 37°C and the optimum temperature was 70°C at pH 11.5. Calcium divalent cation raised the pH and heat stabilities of the enzyme. In the presence of 5 mM CaCl₂, it showed maximum proteolytic activity at 80°C and stability from pH 4–12.5 at 60°C and below 75°C at pH 11.5. The stabilization by Ca²⁺ was observed in secondary conformation deduced from the circular dichroic spectrum of the enzyme. The protease hydrolyzed the ester bond of benzoyl leucine ester well. The amino acid terminal sequence of the enzyme showed high homology with those of Microbiol serine protease, although alanine of the NH₂-terminal amino acid was deleted.     

Purification and stability characteristics of an alkaline serine protease from a newly isolated Haloalkaliphilic bacterium sp. AH-6

An alkaline protease secreting Haloalkaliphilic bacterium (Gene bank accession number EU118361) was isolated from the Saurashtra Coast in Western India. The alkaline protease was purified by a single step chromatography on phenyl sepharose 6 FF with 28% yield. The molecular mass was 40 kDa as judged by SDS-PAGE. The enzyme displayed catalysis and stability over pH 8–13, optimally at 9–11. It was stable with 0–4 M NaCl and required 150 mM NaCl for optimum catalysis at 37 °C; however, the salt requirement for optimal catalysis increased with temperature. While crude enzyme was active at 25–80 °C (optimum at 50 °C), the purified enzyme had temperature optimum at 37 °C, which shifted to 80 °C in the presence of 2 M NaCl. The NaCl not only shifted the temperature profile but also enhanced the substrate affinity of the enzyme as reflected by the increase in the catalytic constant (K _cat). The enzyme was also calcium dependent and with 2 mM Ca⁺², the activity reached to maximum at 50 °C. The crude enzyme was highly thermostable (37–90 °C); however, the purified enzyme lost its stability above 50 °C and its half life was enhanced by 30 and sevenfold at 60 °C with 1 M NaCl and 50 mM Ca⁺², respectively. The activity of the enzyme was inhibited by PMSF, indicating its serine type. While the activity was slightly enhanced by Tween-80 (0.2%) and Triton X-100 (0.05%), it marginally decreased with SDS. In addition, the enzyme was highly stable with oxidizing-reducing agents and commercial detergents and was affected by metal ions to varying extent. The study assumes significance due to the enzyme stability under the dual extremities of pH and salt coupled with moderate thermal tolerance. Besides, the facts emerged on the enzyme stability would add to the limited information on this enzyme from Haloalkaliphilic bacteria.     

Studies on Tannin Acyl Hydrolase of Microorganisms

Tannin acyl hydrolase (Tannase) from Asp. oryzae No. 7 was purified. The purified enzyme was homogenous on column chromatography (DEAE-Sephadex A50, Sephadex G100), ultra centrifugation and electrophoresis.

The molecular weight of the enzyme estimated by gel filtration method was about 200,000.

The enzyme was stable in the range of pH 3 to 7.5 for 12 hr at 5°C, and for 25 hr at the same temperature in the range of pH 4.5 to 6. The optimum pH for the reaction was 5.5. It was stable under 30°C (over one day, in 0.05 M-citrate buffer of pH 5.5), and the optimum temperature was 30~40°C (reaction for 20min). The activity was lost completely at 55°C in 20 min at pH 5.5, or at 85°C in 10 min at the same pH.

Any metal salt tested did not activate the enzyme, Zink chloride and cupric chloride inhibited the activity or denatured the enzyme. The activity was lost completely by dialysis against EDTA-solution at pH 7.25, although it was not affected by dialysis against deionized water.     

Purification and properties of a citrate synthase from Nitrosomonas sp. TK794 and a comparison with the enzymes of another nitrifying bacteria

Citrate(si)-synthase (citrate oxaloacetate-lyasem EC 4.1.3.7) was purified as an electrophoretically homogeneous protein from an ammonia-oxidizing chemoautotrophic bacterium, Nitrosomonas sp. TK794. The molecular mass of the native enzyme was estimated to be about 287 kDa by gel filtration, whereas SDS-PAGE produced one band with M_r values of 44.7 kDa, suggesting that the enzyme is a hexamer consisting of identical subunits. The isoelectric point of the enzyme was 5.0. The pH and temperature optima for citrate synthase (CS) activity was about 7.5–8.0 and 40°C, respectively. The citrate synthase was stable over a pH range of 6.0–8.5 and up to 40°C. The apparent K_m values for oxaloacetate and acetyl-CoA were about 11 μM and 247 μM, respectively. The activity of the citrate synthase was not inhibited by ATP, NADH or 2-oxoglutarate at 5mM, and was activated by potassium chloride at 0.1–100 mM. The N-terminal amino acid sequence of the enzyme protein was PPQDVATLSPGENKKTIELPILG.     

A novel thermoacidophilic endoglucanase, Ba-EGA, from a new cellulose-degrading bacterium, Bacillus sp.AC-1

A newly discovered bacterium, strain AC1, containing cellulase was isolated from the gastric juice of the mollusca, Ampullaria crosseans. Analysis of the 16S rDNA sequence and carbon sources revealed that the bacterium belonged to the genus Bacillus. A novel endoglucanase (Ba-EGA) was purified from culture supernatants of the bacterium growing in CMC-Na (low viscosity) induction medium. The cellulase was purified about 150-fold by ammonium sulfate fractionation, ion exchange, hydrophobic, and gel filtration chromatography, with a specific activity of 35.0 IU/mg. The molecular mass of the enzyme was 67 kDa. N-terminal amino acid sequencing revealed a sequence of SDYNYVEVLQKSILF, which had high homology with endoglucanases from the Bacillus and Clostridium species. The maximal activity of the enzyme with the substrate of CM-cellulose is at pH 4.5–6.5 and 70°C, respectively. The studies on pH and temperature stability showed that the Ba-EGA is stable enough between pH 7.5 and 10.5 at 30°C for 2 h, and more than 80% of the activity still remains when incubation was prolonged to 1 h at 50°C. The activity of the enzyme was significantly inhibited by Fe²⁺, Cu²⁺ (5.0 mM of each), and sodium dodecyl sulfate (SDS) (0.5%) and obviously activated by Tween 20 and Triton X-100 (0.25% each). Binding studies revealed that the Ba-EGA had cellulose-binding domain.     

Cloning,expression, and characterization of thermostable Manganese superoxide dismutase from <Emphasis Type="Italic">Thermoascus aurantiacus</Emphasis> var. <Emphasis Type="Italic">levisporus</Emphasis>

A superoxide dismutase (SOD) gene of Thermoascus aurantiacus var. levisporus, a thermophilic fungus, was cloned, sequenced, and expressed in Pichia pastoris and its gene product was characterized. The coding sequence predicted a 231 residues protein with a unique 35 amino acids extension at the N-terminus indicating a mitochondrial-targeting sequence. The content of Mn was 2.46 μg/mg of protein and Fe was not detected in the purified enzyme. The enzyme was found to be inhibited by NaN₃, but not by KCN or H₂O₂. These results suggested that the SOD in Thermoascus aurantiacus var. levisporus was the manganese superoxide dismutase type. In comparison with other MnSODs, all manganese-binding sites were also conserved in the sequence (H88, H136, D222, H226). The molecular mass of a single band of the enzyme was estimated to be 21.7 kDa. The protein was expressed in tetramer form with molecular weight of 68.0 kDa. The activity of purified protein was 2,324 U/mg. The optimum temperature of the enzyme was 55°C and it exhibited maximal activity at pH 7.5. The enzyme was thermostable at 50 and 60°C and the half-life at 80°C was approximately 40 min.     

A novel thermo-alkali stable catalase–peroxidase from Oceanobacillus oncorhynchi subsp. incaldaniensis: purification and characterization

A novel thermo-alkali-stable catalase–peroxidase from Oceanobacillus oncorhynchi subsp. incaldaniensis subsp. nov., strain 20AG, was purified and characterized. The protein purified from the cells resulted in 110-fold purification with a specific activity of 35,000 U/mg. The enzyme consisted of four identical subunits of 72 kDa as determined by SDS-PAGE and the total molecular mass measured by gel filtration was 280 kDa. The heme content was determined to be 1 heme per homodimer. The enzyme showed a Soret peak at 406 nm in the oxidized form and was easily reduced by dithionite. The enzyme showed an appreciable peroxidase activity in addition to high catalase activity. The behaviour of this heme-enzyme was typical of the class of prokaryotic catalase–peroxidases, which are sensitive to cyanide and insensitive to the eukaryotic catalase inhibitor 3-amino-1,2,4-triazole. The enzyme was active over a temperature range from 30 to 60°C and a pH range from 5 to 10, with an optimum pH about 9.0 and an optimum temperature of 40°C. The enzyme was stable in the pH range of 5.0 to 10.0 after 1 h of treatment at 40°C. The enzyme was stable for 24 h at 40°C with a half-life of 4 h 60°C. The enzyme had a K _m of 24 mM for hydrogen peroxide. The amino terminal amino acid sequence of the catalase–peroxidase from strain 20AG was SEKRKMTTAFGA and it showed no homology with other catalases.     

Purification and partial characterization of novel penicillin V acylase from Acinetobacter sp. AP24 isolated from Loktak Lake,an Indo-Burma biodiversity hotspot

Members of the bacterial genus Acinetobacter have attracted great attention over the past few decades, on account of their various biotechnological applications and clinical implications. In this study, we are reporting the first experimental penicillin V acylase (PVA) activity from this genus. Penicillin acylases are pharmaceutically important enzymes widely used in the synthesis of semisynthetic beta-lactam antibiotics. The bacterium, identified as Acinetobacter sp. AP24, was isolated from the water of Loktak Lake (Manipur, India), an Indo-Burma biodiversity hotspot. PVA production was increased threefold in an optimized medium with 0.2% sodium glutamate and 1% glucose as nitrogen and carbon sources respectively, after 24 hr of fermentation at 28°C and pH 7.0 with shaking at 180 rpm. The enzyme was purified to homogeneity by cation-exchange chromatography using SP-sepharose resin. The PVA is a homotetramer with subunit molecular mass of 34 kD. The enzyme was highly specific toward penicillin V with optimal hydrolytic activity at 40°C and pH 7.5. The enzyme was stable from pH 5.0 to 9.0 at 25 °C for 2 hr. The enzyme retained 75% activity after 1 hr of incubation at 40°C at pH 7.5.     

Production and Properties of Alkaline Dextranase from a Newly Isolated Brevibacterium

About 500 strains of dextranase producing microorganisms were examined in detail for pH- activity and enzyme stability. A gram positive bacterium identified as belonging to the genus Brevibacterium was found to produce alkaline dextranase. Maximal dextranase synthesis was obtained when grown aerobically at 26°C for 3 days in a medium containing 1 % dextran, 2% ethanol, 1 % polypeptone and 0.05 % yeast extract together with trace amounts of inorganic salts.

Brevibacterium dextranase had an optimum pH of 8.0 for activity at 37°C and an optimal temperature at 53°C at pH 7.5. The enzyme was quite stable over the range of pH 5.0 to 10.5 on 24 hr incubation at 37°C, especially on alkaline pH. The enzyme was also heat stable at 60°C for 10 min.     

Polynucleotide Phosphorylase from Acromobacter sp. KR 170-4

Eighty-five strains of bacteria were screened for selection of microorganisms suitable for industrial production of polynucleotides. Among these bacteria, Achromobacter sp. KR 170-4 (ATCC 21942) was found to be rich in polynucleotide Phosphorylase (PNPase) in its “salt-shockate” as compared with the other strains tested. PNPase was purified about 50-fold from the “salt-shockate” of Achromobacter sp. KR 170-4, and properties of the enzyme were elucidated. Optimal pH for reaction was 10.1. Stable pH range at 37°C was between pH 6.5 and 10.5. Optimal temperatures were 46°C for polymerization of ADP or IDP, and 43°C for CDP or UDP. The enzyme was stable below 55°C at pH 9.2. The enzyme required Mn²⁺ rather than Mg²⁺ unlike the other PNPases reported. Optimal concentration of Mn²⁺ was 6 mM.     

Purification and characterization of a serine alkaline protease from Bacillus clausii GMBAE 42

An extracellular serine alkaline protease of Bacillus clausii GMBAE 42 was produced in protein-rich medium in shake-flask cultures for 3 days at pH 10.5 and 37°C. Highest alkaline protease activity was observed in the late stationary phase of cell cultivation. The enzyme was purified 16-fold from culture filtrate by DEAE-cellulose chromatography followed by (NH₄)₂SO₄ precipitation, with a yield of 58%. SDS-PAGE analysis revealed the molecular weight of the enzyme to be 26.50 kDa. The optimum temperature for enzyme activity was 60°C; however, it is shifted to 70°C after addition of 5 mM Ca²⁺ ions. The enzyme was stable between 30 and 40°C for 2 h at pH 10.5; only 14% activity loss was observed at 50°C. The optimal pH of the enzyme was 11.3. The enzyme was also stable in the pH 9.0–12.2 range for 24 h at 30°C; however, activity losses of 38% and 76% were observed at pH values of 12.7 and 13.0, respectively. The activation energy of Hammarsten casein hydrolysis by the purified enzyme was 10.59 kcal mol⁻¹ (44.30 kJ mol⁻¹). The enzyme was stable in the presence of the 1% (w/v) Tween-20, Tween-40,Tween-60, Tween-80, and 0.2% (w/v) SDS for 1 h at 30°C and pH 10.5. Only 10% activity loss was observed with 1% sodium perborate under the same conditions. The enzyme was not inhibited by iodoacetate, ethylacetimidate, phenylglyoxal, iodoacetimidate, n-ethylmaleimidate, n-bromosuccinimide, diethylpyrocarbonate or n-ethyl-5-phenyl-iso-xazolium-3′-sulfonate. Its complete inhibition by phenylmethanesulfonylfluoride and relatively high k _cat value for N-Suc-Ala-Ala-Pro-Phe-pNA hydrolysis indicates that the enzyme is a chymotrypsin-like serine protease. K _m and k _cat values were estimated at 0.655 μM N-Suc-Ala-Ala-Pro-Phe-pNA and 4.21×10³ min⁻¹, respectively.     

Purification of branched-chain amino acid aminotransferase from <Emphasis Type="Italic">Helicobacter pylori</Emphasis> NCTC 11637

Summary. Branched-chain amino acid aminotransferase was purified by several column chromatographies from Helicobacter pylori NCTC 11637, and the N-terminal amino acid sequence was analyzed. The enzyme gene was sequenced based on a putative branched-chain amino acid aminotransferase gene, ilvE of H. pylori 26695, and the whole amino acid sequence was deduced from the nucleotide sequence. The enzyme existed in a homodimer with a calculated subunit molecular weight (MW) of 37,539 and an isoelectric point (pI) of 6.47. The enzyme showed high affinity to 2-oxoglutarate (K _m = 0.085 mM) and L-isoleucine (K _m = 0.34 mM), and V _max was 27.3 μmol/min/mg. The best substrate was found to be L-isoleucine followed by L-leucine and L-valine. No activity was shown toward the D-enantiomers of these amino acids. The optimal pH and temperature were pH 8.0 and 37 °C, respectively.     

Purification and characterization of an extremely stable glucose isomerase from Geobacillus thermodenitrificans TH2

The D-glucose/D-xylose isomerase was purified from a thermophilic bacterium, Geobacillus thermodenitrificans TH2, by precipitating with heat shock and using Q-Sepharose ion exchange column chromatography, and then characterized. The purified enzyme had a single band having molecular weight of 49 kDa on SDS-PAGE. In the presence of D-glucose as a substrate, the optimum temperature and pH of the enzyme were found to be 80°C and 7.5, respectively. The purified xylose isomerase of G. thermodenitrificans TH2 was extremely stable at pH 7.5 after 96 h incubation at 4°C and 50°C. When the thermal stability profile was analyzed, it was determined that the purified enzyme was extremely stable during incubation periods of 4 months and 4 days at 4°C and 50°C, respectively. The K _m and V _max values of the purified xylose isomerase from G. thermodenitrificans TH2 were calculated as 32 mM and 4.68 μmol/min per mg of protein, respectively. Additionally, it was detected that some metal ions affected the enzyme activity at different ratios. The enzyme was active and stable at high temperatures and nearly neutral pHs which are desirable for the usage in the food and ethanol industry.     

A Thermostable phytase from <Emphasis Type="Italic">Neosartorya spinosa</Emphasis> BCC 41923 and its expression in <Emphasis Type="Italic">Pichia pastoris</Emphasis>

A phytase gene was cloned from Neosartorya spinosa BCC 41923. The gene was 1,455 bp in size, and the mature protein contained a polypeptide of 439 amino acids. The deduced amino acid sequence contains the consensus motif (RHGXRXP) which is conserved among phytases and acid phosphatases. Five possible disulfide bonds and seven potential N-glycosylation sites have been predicted. The gene was expressed in Pichia pastoris KM71 as an extracellular enzyme. The purified enzyme had specific activity of 30.95 U/mg at 37°C and 38.62 U/mg at 42°C. Molecular weight of the deglycosylated recombinant phytase, determined by SDS-PAGE, was approximately 52 kDa. The optimum pH and temperature for activity were pH 5.5 and 50°C. The residual phytase activity remained over 80% of initial activity after the enzyme was stored in pH 3.0 to 7.0 for 1 h, and at 60% of initial activity after heating at 90°C for 20 min. The enzyme exhibited broad substrate specificity, with phytic acid as the most preferred substrate. Its K _m and V _max for sodium phytate were 1.39 mM and 434.78 U/mg, respectively. The enzyme was highly resistant to most metal ions tested, including Fe²⁺, Fe³⁺, and Al³⁺. When incubated with pepsin at a pepsin/phytase ratio of 0.02 (U/U) at 37°C for 2 h, 92% of its initial activity was retained. However, the enzyme was very sensitive to trypsin, as 5% of its initial activity was recovered after treating with trypsin at a trypsin/phytase ratio of 0.01 (U/U).