共查询到20条相似文献,搜索用时 15 毫秒
1.
The functional significance of evolutionarily conserved motifs/patterns of short regions in proteins is well documented. Although a large number of sequences are conserved, only a small fraction of these are invariant across several organisms. Here, we have examined the structural features of the functionally important peptide sequences, which have been found invariant across diverse bacterial genera. Ramachandran angles (phi,psi) have been used to analyze the conformation, folding patterns and geometrical location (buried/exposed) of these invariant peptides in different crystal structures harboring these sequences. The analysis indicates that the peptides preferred a single conformation in different protein structures, with the exception of only a few longer peptides that exhibited some conformational variability. In addition, it is noticed that the variability of conformation occurs mainly due to flipping of peptide units about the virtual C(alpha)...C(alpha) bond. However, for a given invariant peptide, the folding patterns are found to be similar in almost all the cases. Over and above, such peptides are found to be buried in the protein core. Thus, we can safely conclude that these invariant peptides are structurally important for the proteins, since they acquire unique structures across different proteins and can act as structural determinants (SD) of the proteins. The location of these SD peptides on the protein chain indicated that most of them are clustered towards the N-terminal and middle region of the protein with the C-terminal region exhibiting low preference. Another feature that emerges out of this study is that some of these SD peptides can also play the roles of "fold boundaries" or "hinge nucleus" in the protein structure. The study indicates that these SD peptides may act as chain-reversal signatures, guiding the proteins to adopt appropriate folds. In some cases the invariant signature peptides may also act as folding nuclei (FN) of the proteins. 相似文献
2.
During replica exchange molecular dynamics (RexMD) simulations, several replicas of a system are simulated at different temperatures in parallel allowing for exchange between replicas at frequent intervals. This technique allows significantly improved sampling of conformational space and is increasingly being used for structure prediction of peptides and proteins. A drawback of the standard temperature RexMD is the rapid increase of the replica number with increasing system size to cover a desired temperature range. In an effort to limit the number of replicas, a new Hamiltonian-RexMD method has been developed that is specifically designed to enhance the sampling of peptide and protein conformations by applying various levels of a backbone biasing potential for each replica run. The biasing potential lowers the barrier for backbone dihedral transitions and promotes enhanced peptide backbone transitions along the replica coordinate. The application on several peptide cases including in all cases explicit solvent indicates significantly improved conformational sampling when compared with standard MD simulations. This was achieved with a very modest number of 5-7 replicas for each simulation system making it ideally suited for peptide and protein folding simulations as well as refinement of protein model structures in the presence of explicit solvent. 相似文献
3.
All-atom force fields are now routinely used for more detailed understanding of protein folding mechanisms. However, it has been pointed out that use of all-atom force fields does not guarantee more accurate representations of proteins; in fact, sometimes it even leads to biased structural distributions. Indeed, several issues remain to be solved in force field developments, such as accurate treatment of implicit solvation for efficient conformational sampling and proper treatment of backbone interactions for secondary structure propensities. In this study, we first investigate the quality of several recently improved backbone interaction schemes in AMBER for folding simulations of a beta-hairpin peptide, and further study their influences on the peptide's folding mechanism. Due to the significant number of simulations needed for a thorough analysis of tested force fields, the implicit Poisson-Boltzmann solvent was used in all simulations. The chosen implicit solvent was found to be reasonable for studies of secondary structures based on a set of simulations of both alpha-helical and beta-hairpin peptides with the TIP3P explicit solvent as benchmark. Replica exchange molecular dynamics was also utilized for further efficient conformational sampling. Among the tested AMBER force fields, ff03 and a revised ff99 force field were found to produce structural and thermodynamic data in comparably good agreement with the experiment. However, detailed folding pathways, such as the order of backbone hydrogen bond zipping and the existence of intermediate states, are different between the two force fields, leading to force field-dependent folding mechanisms. 相似文献
4.
How is the native structure encoded in the amino acid sequence? For the traditional backbone centric view, the dominant forces are hydrogen bonds (backbone) and phi-psi propensity. The role of hydrophobicity is non-specific. For the side-chain centric view, the dominant force of protein folding is hydrophobicity. In order to understand the balance between backbone and side-chain forces, we have studied the contributions of three components of a beta-hairpin peptide: turn, backbone hydrogen bonding and side-chain interactions, of a 16-residue fragment of protein G. The peptide folds rapidly and cooperatively to a conformation with a defined secondary structure and a packed hydrophobic cluster of aromatic side-chains. Our strategy is to observe the structural stability of the beta-hairpin under systematic perturbations of the turn region, backbone hydrogen bonds and the hydrophobic core formed by the side-chains, respectively. In our molecular dynamics simulations, the peptides are solvated. with explicit water molecules, and an all-atom force field (CFF91) is used. Starting from the original peptide (G41EWTYDDATKTFTVTE56), we carried out the following MD simulations. (1) unfolding at 350 K; (2) forcing the distance between the C(alpha) atoms of ASP47 and LYS50 to be 8 A; (3) deleting two turn residues (Ala48 and Thr49) to form a beta-sheet complex of two short peptides, GEWTYDD and KTFTVTE; (4) four hydrophobic residues (W43, Y45, F52 and T53) are replaced by a glycine residue step-by-step; and (5) most importantly, four amide hydrogen atoms (T44, D46, T53, and T55, which are crucial for backbone hydrogen bonding), are substituted by fluorine atoms. The fluorination not only makes it impossible to form attractive hydrogen bonding between the two beta-hairpin strands, but also introduces a repulsive force between the two strands due to the negative charges on the fluorine and oxygen atoms. Throughout all simulations, we observe that backbone hydrogen bonds are very sensitive to the perturbations and are easily broken. In contrast, the hydrophobic core survives most perturbations. In the decisive test of fluorination, the fluorinated peptide remains folded under our simulation conditions (5 ns, 278 K). Hydrophobic interactions keep the peptide folded, even with a repulsive force between the beta-strands. Thus, our results strongly support a side-chain centric view for protein folding. 相似文献
5.
Over the last decades the field of pharmaceutically relevant peptides has enormously expanded. Among them, several peptide families exist that contain three or more disulfide bonds. In this context, elucidation of the disulfide patterns is extremely important as these motifs are often prerequisites for folding, stability, and activity. An example of this structure-determining pattern is a cystine knot which comprises three constrained disulfide bonds and represents a core element in a vast number of mechanically interlocked peptidic structures possessing different biological activities. Herein, we present our studies on disulfide pattern determination and structure elucidation of cystine-knot miniproteins derived from Momordica cochinchinensis peptide MCoTI-II, which act as potent inhibitors of human matriptase-1. A top-down mass spectrometric analysis of the oxidised and bioactive peptides is described. Following the detailed sequencing of the peptide backbone, interpretation of the MS3 spectra allowed for the verification of the knotted topology of the examined miniproteins. Moreover, we found that the fragmentation pattern depends on the knottin’s folding state, hence, tertiary structure, which to our knowledge has not been described for a top-down MS approach before. 相似文献
6.
7.
A peptide fraction isolated from a cyanogen bromide digest of bovine dentin collagen had a molecular weight of 46000. Its size and amino acid composition indicated that it could not consist of peptides derived from the cleavage of a single alpha chain. On reduction with tritiated sodium borohydride, radioactivity was incorporated primarily into 5, 5'-dihydroxylysinonorleucine without degradation at the peptide backbone. Periodate cleavage of the reduced or nonreduced peptide fraction generated one fragment of molecular weight 28000 and one of 18000 completely accounting for the size of the parent peptide. On amino acid analysis the constituent single-chain peptides were determined to be alpha2CB4 and alpha1CB6. Both peptides isolated after periodate oxidation of the tritiated borohydride reduced cross-link peptide were found to contain (3H)hydroxynorvaline. These data show that some hydroxylysine of alpha2CB4, a helical region peptide, was present in aldehyde form and could act as the aldehyde donor icross-link, Schiff's base formation. The only cross-linkage of this alpha2CB4 acting as an aldehyde donor peptide to alpha1CB6 would be a helical region to helical region bond, perhaps accounting for the unusual stability and low solubility of dentin collagen. 相似文献
8.
Folding of peptide fragments comprising the complete sequence of proteins. Models for initiation of protein folding. II. Plastocyanin. 总被引:4,自引:0,他引:4
H J Dyson J R Sayre G Merutka H C Shin R A Lerner P E Wright 《Journal of molecular biology》1992,226(3):819-835
In an attempt to understand the earliest events in the protein folding pathway, the complete sequence of French bean plastocyanin has been synthesized as a series of short peptide fragments, and the conformational preferences of each peptide examined in aqueous solution using proton n.m.r. methods. Plastocyanin consists largely of beta-sheet, with reverse turns and loops between the strands of the sheet, and one short helix. The n.m.r. experiments indicate that most of the peptides derived from the plastocyanin sequence have remarkably little propensity to adopt folded conformations in aqueous solution, in marked contrast to the peptides derived from the helical protein, myohemerythrin (accompanying paper). For most plastocyanin peptides, the backbone dihedral angles are predominantly in the beta-region of conformational space. Some of the peptides show weak NOE connectivities between adjacent amide protons, indicative of small local populations of backbone conformations in the a region of (phi,psi) space. A conformational preference for a reverse turn is seen in the sequence Ala65-Pro-Gly-Glu68, where a turn structure is found in the folded protein. Significantly, the peptide sequences that populate the alpha-region of (phi,psi) space are mostly derived from turn and loop regions in the protein. The addition of trifluoroethanol does not drive the peptides into helical conformations. In one region of the sequence, the n.m.r. spectra provide evidence of the formation of a hydrophobic cluster involving aromatic and aliphatic side-chains. These results have significance for understanding the initiation of protein folding. From these studies of the fragments of plastocyanin (this paper) and myohemerythrin (accompanying paper), it appears that there is a pre-partitioning of the conformational space sampled by the polypeptide backbone that is related to the secondary structure in the final folded state. 相似文献
9.
CD and nmr spectroscopy were used to compare the conformational properties of two related peptides. One of the peptides, Model AB, was designed to adopt a helix-turn-extended strand (αβ) tertiary structure in water that might be stabilized by hydrophobic interactions between two leucine residues in the amino-terminal segment and two methionine residues in the carboxyl terminal segment. The other peptide, AB Helix, has the same amino acid sequence as Model AB except that it lacks the-Pro-Met-Thr-Met-Thr-Gly segment at the carboxyl-terminus. Although the carboxyl-terminal segment of Model AB was found to be unstructured, its presence increases the number of residues in a helical conformation, shifts the pKas of three ionizable side chains by 1 pH unit or more compared to an unstructured peptide, stabilizes the peptide as a monomer in high concentrations of ammonium sulfate, increases the conformational stability of residues at the terminal ends of the helix, and results in many slowly exchanging amide protons throughout the entire backbone of the peptide. These results suggest that interactions between adjacent segments in a small peptide can have significant structure organizing effects. Similar kinds of interactions may be important in determining the structure of early intermediates in protein folding and may be useful in the de novo design of independently folding peptides. © 1995 John Wiley & Sons, Inc. 相似文献
10.
Replica exchange molecular dynamics (RexMD) simulations are frequently used for studying structure formation and dynamics of peptides and proteins. A significant drawback of standard temperature RexMD is, however, the rapid increase of the replica number with increasing system size to cover a desired temperature range. A recently developed Hamiltonian RexMD method has been used to study folding of the Trp‐cage protein. It employs a biasing potential that lowers the backbone dihedral barriers and promotes peptide backbone transitions along the replica coordinate. In two independent applications of the biasing potential RexMD method including explicit solvent and starting from a completely unfolded structure the formation of near‐native conformations was observed after 30–40 ns simulation time. The conformation representing the most populated cluster at the final simulation stage had a backbone root mean square deviation of ~1.3 Å from the experimental structure. This was achieved with a very modest number of five replicas making it well suited for peptide and protein folding and refinement studies including explicit solvent. In contrast, during five independent continuous 70 ns molecular dynamics simulations formation of collapsed states but no near native structure formation was observed. The simulations predict a largely collapsed state with a significant helical propensity for the helical domain of the Trp‐cage protein already in the unfolded state. Hydrogen bonded bridging water molecules were identified that could play an active role by stabilizing the arrangement of the helical domain with respect to the rest of the chain already in intermediate states of the protein. Proteins 2009. © 2008 Wiley‐Liss, Inc. 相似文献
11.
A systematic analysis of the substituent influence on the formation of the unique secondary structure type of "mixed" helices in the homologous alpha-, beta-, and gamma-peptides was performed on the basis of ab initio molecular orbital theory. Contrary to the common periodic peptide helices, mixed helices have an alternating periodicity and their hydrogen-bonding pattern is similar to those of beta-sheets. They belong, therefore, to the family of beta-helices. It is shown that folding of peptide sequences into mixed helices is energetically preferred over folding into their periodic counterparts in numerous cases. The influence of entropy and solvents on the formation of the various competitive mixed and periodic helix types is discussed. Among the oligomers of the various homologous amino acids, beta-peptides show the highest tendency to form beta-helices. The rules of substituent influence derived from the analysis of a wide variety of backbone substitution patterns might be helpful for a rational design of mixed helix structures, which could be important for mimicking membrane channels. 相似文献
12.
Using CD and 2D (1)H NMR spectroscopy, we have identified potential initiation sites for the folding of T4 lysozyme by examining the conformational preferences of peptide fragments corresponding to regions of secondary structure. CD spectropolarimetry showed most peptides were unstructured in water, but adopted partial helical conformations in TFE and SDS solution. This was also consistent with the (1)H NMR data which showed that the peptides were predominantly disordered in water, although in some cases, nascent or small populations of partially folded conformations could be detected. NOE patterns, coupling constants, and deviations from random coil Halpha chemical shift values complemented the CD data and confirmed that many of the peptides were helical in TFE and SDS micelles. In particular, the peptide corresponding to helix E in the native enzyme formed a well-defined helix in both TFE and SDS, indicating that helix E potentially forms an initiation site for T4 lysozyme folding. The data for the other peptides indicated that helices D, F, G, and H are dependent on tertiary interactions for their folding and/or stability. Overall, the results from this study, and those of our earlier studies, are in agreement with modeling and HD-deuterium exchange experiments, and support an hierarchical model of folding for T4 lysozyme. 相似文献
13.
Folding of peptide fragments comprising the complete sequence of proteins. Models for initiation of protein folding. I. Myohemerythrin. 总被引:15,自引:0,他引:15
H J Dyson G Merutka J P Waltho R A Lerner P E Wright 《Journal of molecular biology》1992,226(3):795-817
In an attempt to delineate potential folding initiation sites for different protein structural motifs, we have synthesized series of peptides that span the entire length of the polypeptide chain of two proteins, and examined their conformational preferences in aqueous solution using proton nuclear magnetic resonance and circular dichroism spectroscopy. We describe here the behavior of peptides derived from a simple four-helix bundle protein, myohemerythrin. The peptides correspond to the sequences of the four long helices (the A, B, C and D helices), the N- and C-terminal loops and the connecting sequences between the helices. The peptides corresponding to the helices of the folded protein all exhibit preferences for helix-like conformations in solution. The conformational ensembles of the A- and D-helix peptides contain ordered helical forms, as shown by extensive series of medium-range nuclear Overhauser effect connectivities, while the B- and C-helix peptides exhibit conformational preferences for nascent helix. All four peptides adopt ordered helical conformations in mixtures of trifluoroethanol and water. The terminal and interconnecting loop peptides also appear to contain appreciable populations of conformers with backbone phi and psi angles in the alpha-region and include highly populated hydrophobic cluster and/or turn conformations in some cases. Trifluoroethanol is unable to drive these peptides towards helical conformations. Overall, the peptide fragments of myohemerythrin have a marked preference towards secondary structure formation in aqueous solution. In contrast, peptide fragments derived from the beta-sandwich protein plastocyanin are relatively devoid of secondary structure in aqueous solution (see accompanying paper). These results suggest that the two different protein structural motifs may require different propensities for formation of local elements of secondary structure to initiate folding, and that there is a prepartitioning of conformational space determined by the local amino acid sequence that is different for the helical and beta-sandwich structural motifs. 相似文献
14.
The three-dimensional structure of bovine pancreatic (bp) DNase revealed that its N- and C-termini form an antiparallel beta-sheet structure. The involvement of this beta-sheet structure in the active protein folding of bpDNase was thus investigated via a series of deletion and substitution variants. Several substitution variants of N-terminal Leu1 and C-terminal Leu259, and one variant with only the last Thr260 deleted, remained fully active. However, the other deletion variants, in which 2-10 amino acid residues were removed from the C- or N-terminus, all lost the DNase activity. The results indicated that the backbone hydrogen bonding in the antiparallel beta-sheet, rather than the side-chain interactions, is crucial for the correct protein folding. When the deletion variants were complemented with synthetic peptides of the deleted N- or C-terminal sequences, the DNase activity was generated. The highest DNase activity was generated when the C-terminal 10-residue-deleted brDNase(Delta251-260) was admixed with the C-terminal 10-residue peptide (peptide C10) in a molar ratio of 1:400. The noncovalent binding between brDNase(Delta251-260) and peptide C10 exhibited a dissociation constant of 48 microM. Circular dichroism spectra showed that the deletion variants were partially folded with mainly helical structures and that admixture with corresponding peptides facilitated their folding into the nativelike beta-sheet-rich structure. Thermal denaturation profiles also revealed that the transition temperature for brDNase(Delta251-260) was increased from 55 to 63 degrees C after incubation with peptide C10. The folding activation process for the deletion variant occurred in two stages, and Ca(2+) was required. 相似文献
15.
16.
Human adenosine A(2)a receptor is a member of the G-protein-coupled receptor (GPCR) superfamily of seven-helix transmembrane (TM) proteins. To test general models for membrane-protein folding and to identify specific features of folding and assembly for this representative member of an important and poorly understood class of proteins, we synthesized peptides corresponding to its seven TM domains. We assessed the ability of the peptides to insert into micelles and vesicles and measured secondary structure for each peptide in aqueous and membrane-mimetic environments. CD spectra indicate that each of the seven TM peptides form thermally stable, independent alpha-helical structures in both micelles and vesicles. The helical content of the peptides depends on the nature of the membrane-mimetic environment. Four of the peptides (TM3, TM4, TM5, and TM7) exhibit very high-helical structure, near the predicted maximum for their TM segments. The TM1 peptide also adopts relatively high alpha-helical structures. In contrast, two of peptides, TM2 and TM6, display low alpha helicity. Similarly, the ability of the peptides to insert into membrane-mimetic environments, assayed by intrinsic tryptophan fluorescence and fluorescence quenching, varied markedly. Most peptides exhibit higher alpha helicity in anionic sodium dodecyl sulfate than in neutral dodecyl-beta-D-maltoside micelles, and TM2 was disordered in zwiterionic DMPC but was alpha-helical in negatively charged DMPC/DMPG vesicles. These findings strongly suggest that electrostatic interactions between lipids and peptides control the insertion of the peptides and may be involved in membrane-protein-folding events. The measured helical content of these TM domains does not correlate with the predicted helicity based on amino acid sequence, pointing out that, while hydrophobic interactions can be a major determinant for folding of TM peptides, other factors, such as electrostatic interactions or helix-helix interactions, may play significant roles for specific TM domains. Our results represent a comprehensive analysis of helical propensities for a human GPCR and support models for membrane-protein folding in which interactions between TM domains are required for proper insertion and folding of some TM helix domains. The tendency of some peptides to self-associate, especially in aqueous environments, underscores the need to prevent improper interactions during folding and refolding of membrane proteins in vivo and in vitro. 相似文献
17.
The folding and solution conformation of penicillin G acylase 总被引:1,自引:0,他引:1
The solution conformation properties of penicillin G acylase (EC 3.5.1.11) have been characterised by near- and far-ultraviolet circular dichroism, steady-state and time-resolved fluorescence spectroscopy and differential sedimentation velocity. The enzyme (86 kDa) was found to be spherical and stable unfolding over a narrow range of urea concentrations in an apparently cooperative fashion with a mid-point of 4.5 M urea. Separation of its constituent alpha and beta peptides (23.8 kDa and 62.2 kDa, respectively) was accompanied by loss of enzyme activity and unfolding, the kinetics of unfolding being highly dependent upon urea concentration. Urea gradient gel electrophoresis showed that the separated beta peptide aggregates over a wide range of urea concentrations but that the alpha peptide refolds reversibly to a compact state. Physical studies showed that the refolded alpha peptide has a compact but asymmetric structure with more alpha helix than the native enzyme, but is more sensitive to denaturant. The latter is suggested to be due to a hydrophobic patch detected by 8-anilino-1-naphthalene sulfonic acid binding and which is normally covered by the beta peptide in the native enzyme. The results of these investigations indicate that the alpha peptide constitutes a folding domain and suggest that it plays a key role in folding of the precursor for penicillin acylase. 相似文献
18.
Flexible peptides that fold upon binding to another protein molecule mediate a large number of regulatory interactions in the living cell and may provide highly specific recognition modules. We present Rosetta FlexPepDock ab-initio, a protocol for simultaneous docking and de-novo folding of peptides, starting from an approximate specification of the peptide binding site. Using the Rosetta fragments library and a coarse-grained structural representation of the peptide and the receptor, FlexPepDock ab-initio samples efficiently and simultaneously the space of possible peptide backbone conformations and rigid-body orientations over the receptor surface of a given binding site. The subsequent all-atom refinement of the coarse-grained models includes full side-chain modeling of both the receptor and the peptide, resulting in high-resolution models in which key side-chain interactions are recapitulated. The protocol was applied to a benchmark in which peptides were modeled over receptors in either their bound backbone conformations or in their free, unbound form. Near-native peptide conformations were identified in 18/26 of the bound cases and 7/14 of the unbound cases. The protocol performs well on peptides from various classes of secondary structures, including coiled peptides with unusual turns and kinks. The results presented here significantly extend the scope of state-of-the-art methods for high-resolution peptide modeling, which can now be applied to a wide variety of peptide-protein interactions where no prior information about the peptide backbone conformation is available, enabling detailed structure-based studies and manipulation of those interactions. 相似文献
19.
Tuchscherer G Chandravarkar A Camus MS Bérard J Murat K Schmid A Mimna R Lashuel HA Mutter M 《Biopolymers》2007,88(2):239-252
The study of conformational transitions of peptides has obtained considerable attention recently because of their importance as a molecular key event in a variety of degenerative diseases. However, the study of peptide self-assembly into beta-sheets and amyloid beta (Abeta) fibrils is strongly hampered by their difficult synthetic access and low solubility. We have recently developed a new concept termed switch-peptides that allows the controlled onset of polypeptide folding and misfolding at physiologic conditions. As a major feature, the folding process is initiated by chemically or enzyme triggered O,N-acyl migration in flexible and soluble folding precursors containing Ser- or Thr-derived switch (S)-elements. The elaborated methodologies are exemplified for the in situ conversion of NPY- and Cyclosporine A-derived prodrugs, as well as for the onset and reversal of alpha and beta conformational transitions in Abeta peptides. In combining orthogonally addressable switch-elements, the consecutive switching on of S-elements gives new insights into the role of individual peptide segments (hot spots) in early processes of polypeptide self-assembly and fibrillogenesis. Finally, the well-known secondary structure disrupting effect of pseudoprolines (PsiPro) is explored for its use as a building block (S-element) in switch-peptides. To this end, synthetic strategies are described, allowing for the preparation of PsiPro-containing folding precursors, exhibiting flexible random-coil conformations devoid of fibril forming propensity. The onset of beta-sheet and fibril formation by restoring the native peptide chain in a single step classify PsiPro-units as the most powerful tool for inhibiting peptide self-assembly, and complement the present methodologies of the switch-concept for the study of fibrillogenesis. 相似文献
20.
The molecular chaperonins are essential proteins involved in protein folding, complex assembly, and polypeptide translocation. While there is abundant structural information about the machinery and the mechanistic details of its action are well studied, it is yet unresolved how chaperonins recognize a large number of structurally unrelated polypeptides in their unfolded or partially folded forms. To determine the nature of chaperonin-substrate recognition, we have characterized by NMR methods the interactions of GroEL with synthetic peptides that mimic segments of unfolded proteins. In previous work, we found using transferred nuclear Overhauser effect (trNOE) analysis that two 13 amino acid peptides bound GroEL in an amphipathic alpha-helical conformation. By extending the study to a variety of peptides with differing sequence motifs, we have observed that peptides can adopt conformations other than alpha-helix when bound to GroEL. Furthermore, peptides of the same composition exhibited significantly different affinities for GroEL as manifested by the magnitude of trNOEs. Binding to GroEL correlates well with the ability of the peptide to cluster hydrophobic residues on one face of the peptide, as determined by the retention time on reversed-phase (RP) HPLC. We conclude that the molecular basis of GroEL-substrate recognition is the presentation of a hydrophobic surface by an incompletely folded polypeptide and that many backbone conformations can be accommodated. 相似文献