Isolation of rat liver lysosomes by a single two-phase partition on dextran/polyethylene glycol.

Crude mitochondria from liver rats were added to a two-phase system containing dextran and polyethylene glycol. The polymer and ionic concentration values of the two-phase system were changed in order to separate lysosomes from mitochondria. The best separation of lysosomes and mitochondria was obtained at 6.6-6.6% (w/w) dextran-polyethylene glycol and 5 mmol/kg ammonium chloride as shown by enzyme assays. This procedure showed good reproducibility, and lysosomes were never contaminated with more than 16% mitochondria, as determined by succinate dehydrogenase activity, and beta-D-galactosidase and acid phosphatase activities were enriched five- to sixfold. The lipid composition profile of lysosomes was quite similar to that obtained by means of free carrier electrophoresis, considered a reference method.     

Polyamines effect on subcellular fractionation of rat liver homogenate

1) Spermidine and spermine added to the homogenizing medium are able to increase the sedimentation velocity of mitochondria, smooth microsomes, lysosomes, Golgi apparatus and plasma membranes. Spermine at 0.5 mM enhances the sedimentation and at 3 mM is able to sediment, at 600 g for 10 min, almost the totality of membranous components of the cell. 2) Smooth microsomes were used as a model to study the nature of spermine effect. The amount of spermine bound to 1 g of smooth microsomes would increase their density of about 0.02%. In the presence of 1 mM spermine the great majority of smooth microsomes are unable to pass through a 10 μ filter indicating an extensive aggregation of the particles. 3) Spermine induced aggregation of smooth microsomes can be reversed by either heparin or poly-D-glutamic acid.     

Partition of isomeric dipeptides in poly(ethylene glycol)/magnesium sulfate aqueous two-phase systems

A series of isomeric dipeptides, i.e., those containing identical residues but in different order such as Trp-Gly versus Gly-Trp, was partitioned in a poly(ethylene glycol) (PEG)/magnesium sulfate (MgSO4) aqueous two-phase system. Dipeptides having a more hydrophobic character favored the upper (PEG) phase. Moreover, the partition coefficients for isomeric dipeptides are different, with the partition coefficients for dipeptides containing the more hydrophobic residue in the C-terminal position being, in general, greater than the partition coefficients for corresponding isomers which contain the more hydrophobic residue in the N-terminal position. These observations can be attributed to the different interactions that the isomers have with specific two-phase systems.     

Protein quantification in the presence of poly(ethylene glycol) and dextran using the Bradford method

Some experimental methodologies require the quantification of protein in the presence of polymers like poly(ethylene glycol) (PEG) and dextran (DEX). In the aqueous two-phase system (ATPS) extraction of biomolecules, the interference of these phase-forming polymers on the Bradford quantification assay is commonly recognized. However, how these polymers interfere has not been reported hitherto. In this study we show that while dextran concentrations of 20% (w/w) can be used without error, loss of accuracy occurs for solutions with PEG concentrations >10% (w/w). Above this value a substantial decrease on the assay sensitivity is observed.     

Analytical subcellular fractionation of rat pituitary homogenates with special reference to the subcellular localization and properties of alkaline phosphatases

Alkaline phosphatase activities of the virgin rat anterior pituitary were studied with a highly sensitive fluorometric assay. Tissue whole homogenates were fractionated on sucrose density gradients in a Beaufay automatic zonal rotor and the gradient fractions assayed for alkaline phosphatase, prolactin and various organelle marker enzymes. Alkaline phosphatase was distributed between two peaks on the gradient. The low-density (1.10–1.15 g·cm^?3) alkaline phosphatase component co-sedimented with the plasma membrane marker, 5′-nucleotidase, had an apparent K_m for 4-methylumbelliferyl phosphate of approx. 59 μM, and was inhibited by levamisole. The high-density (1.20–1.25 g·cm^?3) peak was resistant to levamisole-inhibition, had an apparent K_m of approx. 30 μM and its distribution was distinct from plasma membrane, Golgi, lysosome, endoplasmic reticulum, mitochondria and prolactin granule markers on the isopycnic gradients.     

Peptide hydrophobicity and partitioning in poly(ethylene glycol)/magnesium sulfate aqueous two-phase systems.

Several amino acids and peptides were partitioned in poly(ethylene glycol) (PEG)/magnesium sulfate (MgSO4) aqueous two-phase systems. The partition coefficients measured for amino acids and peptides were proportional to the difference in PEG concentration between the phases. The partitioning data were used to calculate the relative hydrophobicities of individual amino acids, which were then used to estimate the hydrophobicities of peptides. The partition coefficients of several dipeptides were predicted from these estimated hydrophobicities. A series of peptide fragments that compose the pentapeptide leucine enkephalin was also partitioned in the PEG/MgSO4 system. Again, the partitioning depended upon the hydrophobicities of the individual exposed amino acids.     

Extractive cultivation of xylanase by Penicillium janthinellum in a poly(ethylene glycol)/cashew-nut tree gum aqueous two-phase system

Cultivation of the fungus Penicillium janthinellum for xylanase production was studied in a poly(ethylene glycol)/cashew-nut tree gum aqueous two-phase system, using a two-level fractional factorial design. The parameters studied were initial pH, cultivation time, type of agro-industrial residue (oat husk or corn cob), agitation, temperature, and phase-forming polymers. The xylanase produced during fermentation partitioned into the top phase. The agitation and temperature (negative), cultivation time and initial pH (positive) effects proved statistically significant for xylanase production. The highest percentage yield of the xylanase in the top and its production in the top phase, about 97% and 160.7 U/mL, were obtained in cultures of 120 h, 40 rpm, 25 degrees C, and pH 5.0.     

Ultrastructural study of echinocytes induced by poly (ethylene glycol)-cholesterol

Poly (ethylene glycol)-cholesterol (PEG-Chol) consists of a hydrophilic PEG and hydrophobic cholesterol moiety. When PEG-Chol was applied to erythrocytes, the reagent quantitatively induced protrusions by exclusively distributing in the outer monolayer of the membrane. This kind of response has been regarded as a general response that reduces the stress of expansion of the outer monolayer. However, the relationship between the membrane architecture and the distribution of such molecules is unknown. In this study, we examined the distribution of tagged PEG-Chol along the shape change pathway. The echinocytic shape was initiated by the initial formation of bumps on the rim of the discoid, which subsequently elongated as protrusions. These protrusions contained aggregates of granular structures, which appeared to accommodate the increase in the outer monolayer area. At higher concentrations, PEG-Chol further induced sphero-echinocytosis that resulted in numerous branched protrusion processes. We found that PEG-Chol was exclusively distributed in these protrusions and, in particular, accumulated at the tips. These results suggested that externally intercalated PEG-Chol was sequestrated from erythrocytes as membrane protrusions through an as-yet-unknown mechanism.     

Aggregation and fusion of unilamellar vesicles by poly(ethylene glycol)

Various aspects of the interaction between the fusogen, poly(ethylene glycol) and phospholipids were examined. The aggregation and fusion of small unilamellar vesicles of egg phosphatidylcholine (PC), bovine brain phosphatidylserine (PS) and dimyristoylphosphatidylcholine (DMPC) were studied by dynamic light scattering, electron microscopy and NMR. The fusion efficiency of Dextran, glycerol, sucrose and poly(ethylene glycol) of different molecular weights were compared. Lower molecular weight poly(ethylene glycol) are less efficient with respect to both aggregation and fusion. The purity of poly(ethylene glycol) does not affect its fusion efficiency. Dehydrating agents, such as Dextran, glycerol and sucrose, do not induce fusion. 31P-NMR results revealed a restriction in the phospholipid motion by poly(ethylene glycol) greater than that by glycerol and Dextran of similar viscosity and dehydrating capacity. This may be associated with the binding of poly(ethylene glycol) to egg PC, with a binding capacity of 1 mol of poly(ethylene glycol) to 12 mol of lipid. Fusion is greatly enhanced below the phase transition for DMPC, with extensive fusion occurring below 6% poly(ethylene glycol). Fusion of PS small unilamellar vesicles depends critically on the presence of cations. Large unilamellar vesicles were found to fuse less readily than small unilamellar vesicles. The results suggest that defects in the bilayer plays an important role in membrane fusion, and the 'rigidization' of the phospholipid molecules facilitates fusion possibly through the creation of defects along domain boundaries. Vesicle aggregation caused by dehydration and surface charge neutralization is a necessary but not a sufficient condition for fusion.     

Protein resistance of dextran and dextran-poly(ethylene glycol) copolymer films

The protein resistance of dextran and dextran-poly(ethylene glycol) (PEG) copolymer films was examined on an organosilica particle-based assay support. Comb-branched dextran-PEG copolymer films were synthesized in a two step process using the organosilica particle as a solid synthetic support. Particles modified with increasing amounts (0.1-1.2 mg m(-2)) of three molecular weights (10,000, 66,900, 400,000 g mol(-1)) of dextran were found to form relatively poor protein-resistant films compared to dextran-PEG copolymers and previously studied PEG films. The efficacy of the antifouling polymer films was found to be dependent on the grafted amount and its composition, with PEG layers being the most efficient, followed by dextran-PEG copolymers, and dextran alone being the least efficient. Immunoglobulin gamma (IgG) adsorption decreased from ～5 to 0.5 mg m(-2) with increasing amounts of grafted dextran, but bovine serum albumin (BSA) adsorption increased above monolayer coverage (～2 mg m(-2)) indicating ternary adsorption of the smaller protein within the dextran layer.     

Protein resistance of dextran and dextran-poly(ethylene glycol) copolymer films

The protein resistance of dextran and dextran-poly(ethylene glycol) (PEG) copolymer films was examined on an organosilica particle-based assay support. Comb-branched dextran-PEG copolymer films were synthesized in a two step process using the organosilica particle as a solid synthetic support. Particles modified with increasing amounts (0.1–1.2 mg m^?2) of three molecular weights (10,000, 66,900, 400,000 g mol^?1) of dextran were found to form relatively poor protein-resistant films compared to dextran-PEG copolymers and previously studied PEG films. The efficacy of the antifouling polymer films was found to be dependent on the grafted amount and its composition, with PEG layers being the most efficient, followed by dextran-PEG copolymers, and dextran alone being the least efficient. Immunoglobulin gamma (IgG) adsorption decreased from ～5 to 0.5 mg m^?2 with increasing amounts of grafted dextran, but bovine serum albumin (BSA) adsorption increased above monolayer coverage (～2 mg m^?2) indicating ternary adsorption of the smaller protein within the dextran layer.