Biodesulfurization.

Microbial sulfur-specific transformations have been identified that selectively desulfurize organic sulfur compounds in fossil fuels. Recent discoveries related to biodesulfurization mechanisms may lead to commercial applications of biodesulfurization through engineering recombinant strains for over-expression of biodesulfurization genes, removal of end product repression, and/or by combining relevant industrial and environmental traits with improvements in bioprocess design.     

Temporally segmented modelling: a route to improved bioprocess monitoring using near infrared spectroscopy?

Near infrared spectroscopy (NIRS) was used to monitor an industrial bioprocess for the production of the antibiotic, tylosin, using a segmented modelling approach. Models were built over the entire time course of the fermentation from 0 to 150 h, and also in two distinct phases or segments of the bioprocess from 50 to 100 h (synthetic phase) and from 100 to 150 h (stationary phase). All models were validated externally and the performance of the full range and segmented models compared. The standard error of prediction (SEP) of the segmented models was less in both 50–100 h and 100–150 h and the correlation highest in the 50–100 h range. This would suggest that data segmentation is potentially a useful method of accommodating the impact of the pronounced matrix changes which occur in some bioprocesses in NIRS models for key analytes. While there are many reports on bioprocess monitoring using NIRS, there have been no previous studies on the use of segmented NIR models within a bioprocess as a means of accommodating matrix change.     

In situ product recovery (ISPR) by crystallization: basic principles, design, and potential applications in whole-cell biocatalysis

The removal of inhibiting or degrading product from a bioreactor as soon as the product is formed is an important issue in industrial bioprocess development. In this review, the potential of crystallization as an in situ product removal (ISPR) technique for the biocatalytic production of crystalline compounds is discussed. The emphasis of this review is on the current status of crystalline product formation by metabolically active cells for application in fine-chemicals production. Examples of relevant biocatalytic conversions are summarized, and some basic process options are discussed. Furthermore, a case study is presented in which two conceptual process designs are compared. In one process, product formation and crystallization are integrated by applying ISPR, whereas a second, nonintegrated process is based on a known conventional process equivalent for the production of 6R-dihydro-oxoisophorone. The comparison indicates that employing ISPR leads to significant advantages over the nonintegrated case in terms of increased productivity and yield with a corresponding decrease in the number of downstream processing steps, as well as in the quantity of waste streams. This leads to an economically more interesting process alternative. Finally, a general outlook on the various research aspects of ISPR by crystallization is given.     

Effect of sulfide concentration on autotrophic denitrification from nitrate and nitrite in vertical fixed-bed reactors

Autotrophic denitrification coupled with sulfide oxidation represents an interesting alternative for the simultaneous removal of nitrate/nitrite and sulfide from wastewaters. The applicability of such bioprocess is especially advantageous for the post treatment of effluents from anaerobic reactors, since they usually produce sulfides, which can be used as endogenous electron donor for autotrophic denitrification. This study evaluated the effect of sulfide concentration on this bioprocess using nitrate and nitrite as electron acceptors in vertical fixed-bed reactors. The results showed that intermediary sulfur compounds were mainly produced when excess of electron donor was applied, which was more evident when nitrate was used. Visual evidences suggested that elemental sulfur was the intermediary compound produced. There was also evidence that the elemental sulfur previously formed was being used when sulfide was applied in stoichiometric concentration relative to nitrate/nitrite. Nitrite was more readily consumed than nitrate. For both electron acceptors and sulfide concentrations tested, autotrophic denitrification was not affected by residual heterotrophic denitrification via endogenic activity, occurring as a minor additional nitrogen removal process.     

Hybrid elementary flux analysis/nonparametric modeling: application for bioprocess control

Background  

The progress in the "-omic" sciences has allowed a deeper knowledge on many biological systems with industrial interest. This knowledge is still rarely used for advanced bioprocess monitoring and control at the bioreactor level. In this work, a bioprocess control method is presented, which is designed on the basis of the metabolic network of the organism under consideration. The bioprocess dynamics are formulated using hybrid rigorous/data driven systems and its inherent structure is defined by the metabolism elementary modes.     

Ultra scale‐down prediction using microwell technology of the industrial scale clarification characteristics by centrifugation of mammalian cell broths

This article describes how a combination of an ultra scale‐down (USD) shear device feeding a microwell centrifugation plate may be used to provide a prediction of how mammalian cell broth will clarify at scale. In particular a method is described that is inherently adaptable to a robotic platform and may be used to predict how the flow rate and capacity (equivalent settling area) of a centrifuge and the choice of feed zone configuration may affect the solids carry over in the supernatant. This is an important consideration as the extent of solids carry over will determine the required size and lifetime of a subsequent filtration stage or the passage of fine particulates and colloidal material affecting the performance and lifetime of chromatography stages. The extent of solids removal observed in individual wells of a microwell plate during centrifugation is shown to correlate with the vertical and horizontal location of the well on the plate. Geometric adjustments to the evaluation of the equivalent settling area of individual wells (Σ_M) results in an improved prediction of solids removal as a function of centrifuge capacity. The USD centrifuge settling characteristics need to be as for a range of equivalent flow rates as may be experienced at an industrial scale for a machine of different shear characteristics in the entry feed zone. This was shown to be achievable with two microwell‐plate based measurements and the use of varying fill volumes in the microwells to allow the rapid study of a fivefold range of equivalent flow rates (i.e., at full scale for a particular industrial centrifuge) and the effect of a range of feed configurations. The microwell based USD method was used to examine the recovery of CHO‐S cells, prepared in a 5 L reactor, at different points of growth and for different levels of exposure to shear post reactor. The combination of particle size distribution measurements of the cells before and after shear and the effect of shear on the solids remaining after centrifugation rate provide insight into the state of the cells throughout the fermentation and the ease with which they and accumulated debris may be removed by continuous centrifugation. Hence bioprocess data are more readily available to help better integrate cell culture and cell removal stages and resolve key bioprocess design issues such as choice of time of harvesting and the impact on product yield and contaminant carry over. Operation at microwell scale allows data acquisition and bioprocess understanding over a wide range of operating conditions that might not normally be achieved during bioprocess development. Biotechnol. Bioeng. 2009; 104: 321–331 © 2009 Wiley Periodicals, Inc.     

Bioprocess development for endospore production by Bacillus coagulans using an optimized chemically defined medium

Bacillus coagulans is a promising probiotic, because it combines probiotic properties of Lactobacillus and the ability of Bacillus to form endospores. Due to this hybrid relationship, cultivation of this organism is challenging. As the probiotics market continues to grow, there is a new focus on the production of these microorganisms. In this work, a strain-specific bioprocess for B. coagulans was developed to support growth on one hand and ensure sporulation on the other hand. This circumstance is not trivial, since these two metabolic states are contrary. The developed bioprocess uses a modified chemically defined medium which was further investigated in a one-factor-at-a-time assay after adaptation. A transfer from the shake flask to the bioreactor was successfully demonstrated in the scope of this work. The investigated process parameters included temperature, agitation and pH-control. Especially the pH-control improved the sporulation in the bioreactor when compared to shake flasks. The bioprocess resulted in a sporulation efficiency of 80%–90%. This corresponds to a sevenfold increase in sporulation efficiency due to a transfer to the bioreactor with pH-control. Additionally, a design of experiment (DoE) was conducted to test the robustness of the bioprocess. This experiment validated the beforementioned sporulation efficiency for the developed bioprocess. Afterwards the bioprocess was then scaled up from a 1 L scale to a 10 L bioreactor scale. A comparable sporulation efficiency of 80% as in the small scale was achieved. The developed bioprocess facilitates the upscaling and application to an industrial scale, and can thus help meet the increasing market for probiotics.     

Applications of metabolic modeling to drive bioprocess development for the production of value-added chemicals

Increasing numbers of value added chemicals are being produced using microbial fermentation strategies. Computational modeling and simulation of microbial metabolism is rapidly becoming an enabling technology that is driving a new paradigm to accelerate the bioprocess development cycle. In particular, constraint-based modeling and the development of genome-scale models of industrial microbes are finding increasing utility across many phases of the bioprocess development workflow. Herein, we review and discuss the requirements and trends in the industrial application of this technology as we build toward integrated computational/experimental platforms for bioprocess engineering. Specifically we cover the following topics: (1) genome-scale models as genetically and biochemically consistent representations of metabolic networks; (2) the ability of these models to predict, assess, and interpret metabolic physiology and flux states of metabolism; (3) the model-guided integrative analysis of high throughput ‘omics’ data; (4) the reconciliation and analysis of on- and off-line fermentation data as well as flux tracing data; (5) model-aided strain design strategies and the integration of calculated biotransformation routes; and (6) control and optimization of the fermentation processes. Collectively, constraint-based modeling strategies are impacting the iterative characterization of metabolic flux states throughout the bioprocess development cycle, while also driving metabolic engineering strategies and fermentation optimization.     

Downscaling screening cultures in a multifunctional bioreactor array-on-a-chip for speeding up optimization of yeast-based lactic acid bioproduction

A key challenge for bioprocess engineering is the identification of the optimum process conditions for the production of biochemical and biopharmaceutical compounds using prokaryotic as well as eukaryotic cell factories. Shake flasks and bench-scale bioreactor systems are still the golden standard in the early stage of bioprocess development, though they are known to be expensive, time-consuming, and labor-intensive as well as lacking the throughput for efficient production optimizations. To bridge the technological gap between bioprocess optimization and upscaling, we have developed a microfluidic bioreactor array to reduce time and costs, and to increase throughput compared with traditional lab-scale culture strategies. We present a multifunctional microfluidic device containing 12 individual bioreactors (V_t = 15 µl) in a 26 mm × 76 mm area with in-line biosensing of dissolved oxygen and biomass concentration. Following initial device characterization, the bioreactor lab-on-a-chip was used in a proof-of-principle study to identify the most productive cell line for lactic acid production out of two engineered yeast strains, evaluating whether it could reduce the time needed for collecting meaningful data compared with shake flasks cultures. Results of the study showed significant difference in the strains' productivity within 3 hr of operation exhibiting a 4- to 6-fold higher lactic acid production, thus pointing at the potential of microfluidic technology as effective screening tool for fast and parallelizable industrial bioprocess development.     

我国工业生物过程工程研究进展

工业生物技术的进步离不开工业生物过程工程研究的不断深入及发展,我国作为工业发酵大国在工业生物技术由实验室向产业化转化过程中面对诸多挑战,由此而逐渐发展起来的我国工业生物过程工程发展先后经历了多个阶段,伴随着不同阶段的发展,我国的工业生物技术水平得到不断的提升。本文重点回顾了近三、四十年来我国工业生物过程工程发展的历程,包括早期由化工过程研究引入的动力学模型化研究、基于过程控制的优化理论与方法的应用、基于过程在线监测技术发展起来的参数相关性分析方法、过程多尺度理论的建立、基于现代固态发酵的新型固态发酵罐的设计及优化技术发展等。通过对生物过程工程发展历程的回顾对先进工业生物过程发展面临的技术难题及由此引出的未来发展重点方向进行了探讨。     

Combining genetic engineering and bioprocess concepts for improved phenylpropanoid production

The group of natural aromatic compounds known as phenylpropanoids has diverse applications, but current methods of production which are largely based on synthesis from petrochemicals or extraction from agricultural biomass are unsustainable. Bioprocessing is a promising alternative, but improvements in production titers and rates are required to make this method profitable. Here the recent advances in genetic engineering and bioprocess concepts for the production of phenylpropanoids are presented for the purpose of identifying successful strategies, including adaptive laboratory evolution, enzyme engineering, in-situ product removal, and biocatalysis. The pros and cons of bacterial and yeast hosts for phenylpropanoid production are discussed, also in the context of different phenylpropanoid targets and bioprocess concepts. Finally, some broad recommendations are made regarding targets for continued improvement and areas requiring specific attention from researchers to further improve production titers and rates.     

On the controllability of continuous fermentation processes

Simulation may be used as a powerful tool for accelerating bioprocess design. This paper demonstrates the use of simulations in exploring the nature and impact of the interactions that exist in a typical bioprocess for the recovery of an intracellular protein. The study shows that an integrated approach to design must be adopted in order to achieve acceptable process designs. Data from a fed-batch fermentation, with verified models for cell harvesting, cell disruption and cell debris removal have been integrated to demonstrate the consequence of process design and operating decisions on the resulting process performance. The trade-offs between product recovery and the extent of cell debris removal for a range of operating conditions have been represented through a series of windows of operation which show how process conditions must be altered in order for given process performance levels to be realised. The capacity to account for process performance including the impact of interactions is seen as a pre-requisite for rigorous bioprocess sequence design and optimisation.     

Extracellular vesicles concentration is a promising and important parameter for industrial bioprocess monitoring

Extracellular vesicles (EVs) are membrane vesicles that are produced by cells to be released into their microenvironment. In this study, we present the EV concentration as a new factor for optimization of industrial bioprocess control. The release of EVs depends on many cell properties, including cell activation and stress status, and cell death. Therefore, the EV concentration might provide a readout for identification of the cell state and the conditions during a bioprocess. Our data show that the EV concentration increased during the bioprocess, which indicated deteriorating conditions in the bioreactor. This increase in EV concentration in the fermentation broth was the consequence of two different processes: cell activation, and cell death. However, the release of EVs from activated living cells had a much weaker impact on EV concentration in the bioreactor than those released during cell death. EVs and cells in the bioprocess environment were quantified by flow cytometry. The most accurate data were obtained directly from unprocessed samples, making the monitoring of the EV concentration a rapid, easy, and cheap method. These EV concentrations reflect the conditions in the bioreactor and provide new information regarding the state of the bioprocess. Therefore, we suggest EV concentration as a new and important parameter for the monitoring of industrial bioprocesses.     

Process implementation aspects for biocatalytic hydrocarbon oxyfunctionalization

Oxidoreductases catalyze a large variety of regio-, stereo-, and chemoselective hydrocarbon oxyfunctionalizations, reactions, which are important in industrial organic synthesis but difficult to achieve by chemical means. This review summarizes process implementation aspects for the in vivo application of the especially versatile enzyme class of oxygenases, capable of specifically introducing oxygen from molecular oxygen into a large range of organic molecules. Critical issues such as reaching high enzyme activity and specificity, product degradation, cofactor recycling, reactant toxicity, and substrate and oxygen mass transfer can be overcome by biochemical process engineering and biocatalyst engineering. Both strategies provide a growing toolset to facilitate process implementation, optimization, and scale-up. Major advances were achieved via heterologous overexpression of oxygenase genes, directed evolution, metabolic engineering, and in situ product removal. Process examples from industry and academia show that the combined use of different concepts enables efficient oxygenase-based whole-cell catalysis of various commercially interesting reactions such as the biosynthesis of chiral compounds, the specific oxyfunctionalization of complex molecules, and also the synthesis of medium-priced chemicals. Better understanding of the cell metabolism and future developments in both biocatalyst and bioprocess engineering are expected to promote the implementation of many and various industrial biooxidation processes.     

Estimating environmental impacts of early-stage bioprocesses

The use of bioprocesses in industrial production promises resource- and energy-efficient processes starting from renewable, nonfossil feedstocks. Thus, the environmental benefits must be demonstrated, ideally in the early development phase with standardized methods such as life cycle assessment (LCA). Herein we discuss selected LCA studies of early-stage bioprocesses, highlighting their potential and contribution to estimating environmental impacts and decision support in bioprocess development. However, LCAs are rarely performed among bioprocess engineers due to challenges such as data availability and process uncertainties. To address this issue, recommendations are provided for conducting LCAs of early-stage bioprocesses. Opportunities are identified to facilitate future applicability, for example, by establishing dedicated bioprocess databases that could enable the use of LCAs as standard tools for bioprocess engineers.     

Physiological description of multivariate interdependencies between process parameters,morphology and physiology during fed‐batch penicillin production

Optimization of productivity and economics of industrial bioprocesses requires characterization of interdependencies between process parameters and process performance. In the case of penicillin production, as in other processes, process performance is often closely interlinked with the physiology and morphology of the organism used for production. This study presents a systematic approach to efficiently characterize the physiological effects of multivariate interdependencies between bioprocess design parameters (spore inoculum concentration, pO₂ control level and substrate feed rate), morphology, and physiology. Method development and application was performed using the industrial model process of penicillin production. Applying traditional, statistical bioprocess analysis, multivariate correlations of raw bioprocess design parameters (high spore inoculum concentration, low pO₂ control as well as reduced glucose feeding) and pellet morphology were identified. A major drawback of raw design parameter correlation models; however, is the lack of transferability across different process scales and regimes. In this context, morphological and physiological bioprocess modeling based on scalable physiological parameters is introduced. In this study, raw parameter effects on pellet morphology were efficiently summarized by the physiological parameter of the biomass yield per substrate. Finally, for the first time to our knowledge, the specific growth rate per spore was described as time‐independent determinant for switching from pellet to disperse growth during penicillin production and thus introduced as a novel, scalable key process parameter for pellet morphology and process performance. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:689–699, 2014     

The symbiotic role of marine microbes on living surfaces

Every surface immersed in the sea rapidly becomes covered with a biofilm. On inanimate surfaces, this is often followed by colonisation by larger organisms, and general macrofouling. On the other hand, the majority of marine organisms remain relatively free from macrofouling, although some may be covered in a thin film of epibiotic bacteria. The role of these bacteria in maintaining the health of the host has received little attention. Here we describe an ecological role for epibiotic bacteria from seaweed surfaces. These epibionts may play a protective role, releasing compounds into the surrounding seawater that help prevent extensive fouling of the surface. These compounds may also have industrial and medical applications. The relative ease of culturing these microbes, compared to other bacteria that produce active compounds suggests seaweed-associated bacteria may be useful in bioprocess applications, such as the production of antimicrobial or antifouling compounds.     

An industrial perspective on bioreactor scale-down: what we can learn from combined large-scale bioprocess and model fluid studies

For industrial bioreactor design, operation, control and optimization, the scale-down approach is often advocated to efficiently generate data on a small scale, and effectively apply suggested improvements to the industrial scale. In all cases it is important to ensure that the scale-down conditions are representative of the real large-scale bioprocess. Progress is hampered by limited detailed and local information from large-scale bioprocesses. Complementary to real fermentation studies, physical aspects of model fluids such as air-water in large bioreactors provide useful information with limited effort and cost. Still, in industrial practice, investments of time, capital and resources often prohibit systematic work, although, in the end, savings obtained in this way are trivial compared to the expenses that result from real process disturbances, batch failures, and non-flyers with loss of business opportunity. Here we try to highlight what can be learned from real large-scale bioprocess in combination with model fluid studies, and to provide suitable computation tools to overcome data restrictions. Focus is on a specific well-documented case for a 30-m(3) bioreactor. Areas for further research from an industrial perspective are also indicated.     

Adsorptive bioconversion of ethylene glycol to glycolic acid by Gluconobacter oxydans DSM 2003

An integrated bioprocess for the production of glycolic acid from ethylene glycol with Gluconobacter oxydans DSM 2003 and in situ product removal were investigated. A slight substrate inhibition was observed as substrate concentration was above 20 g/l and the product inhibition was much stronger. Bioconversion of glycolic acid is an end-product-inhibited reaction. In order to increase the productivity of glycolic acid and reduce the end-product inhibition of bioconversion, an adsorptive bioconversion for glycolic acid production from ethylene glycol catalyzed by resting cells of G. oxydans DSM 2003, was developed by using anion exchange resin D315 as the adsorbent for selective removal of glycolic acid from the reaction mixture. This approach allowed the yield of glycolic acid to be increased to 93.2 g/l, compared to 74.5 g/l obtained from a conventional fed-batch mode.     

Integration of biocatalyst and process engineering for sustainable and efficient n‐butanol production

Recent environmental economic developments generate a need for sustainable and cost‐effective (microbial) processes for the production of high‐volume, low‐priced bulk chemicals. As an example, n‐butanol has, as a second‐generation biofuel, beneficial characteristics compared to ethanol in liquid transportation fuel applications. The industrial revival of the classic n‐butanol (ABE) fermentation requires process and strain engineering solutions for overcoming the main process limitations: product toxicity and low space–time yield. Reaction intensification on the biocatalyst, fermentation, and bioprocess level can be based on economic and ecologic evaluations using quantifiable constraints. This review describes the means of process intensification for biotechnological processes. A quantitative approach is then used for the comparison of the massive literature on n‐butanol fermentation. A comprehensive literature study—including key fermentation performance parameters—is presented and the results are visualized using the window of operation methodology. The comparison allowed the identification of the key constraints, high cell densities, high strain stability, high specific production rate, cheap in situ product removal, high n‐butanol tolerance, to operate in situ product removal efficiently, and cheap carbon source. It can thus be used as a guideline for the bioengineer during the combined biocatalyst, fermentation, and bioprocess development and intensification.