Structure of an anti-DNA fab complexed with a non-DNA ligand provides insights into cross-reactivity and molecular mimicry

Antibodies that recognize DNA (anti-DNA) are part of the autoimmune response underlying systemic lupus erythematosus. To better understand molecular recognition by anti-DNA antibodies, crystallographic studies have been performed using an anti-ssDNA antigen-binding fragment (Fab) known as DNA-1. The previously determined structure of a DNA-1/dT5 complex revealed that thymine bases insert into a narrow groove, and that ligand recognition primarily involves the bases of DNA. We now report the 1.75-A resolution structure of DNA-1 complexed with the biological buffer HEPES (4-(2-Hydroxyethyl)piperazine-1-ethanesulfonic acid). All three light chain complementarity-determining regions (CDRs) and HCDR3 contribute to binding. The HEPES sulfonate hydrogen bonds to His L91, Asn L50, and to the backbone of Tyr H100 and Tyr H100A. The Tyr side-chains of L32, L92, H100, and H100A form nonpolar contacts with the HEPES ethylene and piperazine groups. Comparison to the DNA-1/dT5 structure reveals that the dual recognition of dT5 and HEPES requires a 13-A movement of HCDR3. This dramatic structural change converts the combining site from a narrow groove, appropriate for the edge-on insertion of thymine bases, to one sufficiently wide to accommodate the HEPES sulfonate and piperazine. Isothermal titration calorimetry verified the association of HEPES with DNA-1 under conditions similar those used for crystallization (2 M ammonium sulfate). Interestingly, the presence of 2 M ammonium sulfate increases the affinities of DNA-1 for both HEPES and dT5, suggesting that non-polar Fab-ligand interactions are important for molecular recognition in highly ionic solvent conditions. The structural and thermodynamic data suggest a molecular mimicry mechanism based on structural plasticity and hydrophobic interactions.     

Evidence for structural plasticity of heavy chain complementarity-determining region 3 in antibody-ssDNA recognition

Anti-DNA antibodies play important roles in the pathogenesis of autoimmune diseases. They also represent a unique and relatively unexplored class of DNA-binding protein. Here, we present a study of conformational changes induced by DNA binding to an anti-ssDNA Fab known as DNA-1. Three crystal structures are reported: a complex of DNA-1 bound to dT3, and two structures of the ligand-free Fab. One of the ligand-free structures was determined from crystals exhibiting perfect hemihedral twinning, and the details of structure determination are provided. Unexpectedly, five residues (H97-H100A) in the apex of heavy chain complementarity-determining region 3 (HCDR3) are disordered in both ligand-free structures. Ligand binding also caused a 2-4A shift of the backbone of Tyr L92 and ordering of the L92 side-chain. In contrast, these residues are highly ordered in the Fab/dT3 complex, where Tyr H100 and Tyr H100A form intimate stacking interactions with DNA bases, and L92 forms the 5' end of the binding site. The structures suggest that HCDR3 is very flexible and adopts multiple conformations in the ligand-free state. These results are discussed in terms of induced fit and pre-existing equilibrium theories of ligand binding. Our results allow new interpretations of existing thermodynamic and mutagenesis data in terms of conformational entropy and the volume of conformational space accessible to HCDR3 in the ligand-free state. In the context of autoimmune disease, plasticity of the ligand-free antibody could provide a mechanism by which anti-DNA antibodies bind diverse host ligands, and thereby contribute to pathogenicity.     

Crystal structure of the 64M-2 antibody Fab fragment in complex with a DNA dT(6-4)T photoproduct formed by ultraviolet radiation

DNA photoproducts with (6-4) pyrimidine-pyrimidone adducts formed by ultraviolet radiation are implicated in mutagenesis and cancer, particularly skin cancer. The crystal structure of the Fab fragment of the murine 64M-2 antibody specific to DNA T(6-4)T photoproducts is determined as a complex with dT(6-4)T, a (6-4) pyrimidine-pyrimidone photodimer of dTpT, at 2.4 A resolution to a crystallographic R-factor of 0.199 and an R(free) value of 0.279. The 64M-2 Fab molecule is in an extended arrangement with an elbow angle of 174 degrees, and its five complementarity-determining regions, except L2, are involved in the ligand binding. The bound dT(6-4)T ligand adopting a ring structure with (6-4) linked 5' thymine-3' pyrimidone bases is fully accommodated in an antigen-binding pocket of about 15 Ax10 A. The 5'-thymine and 3'-pyrimidone bases are in half-chair and planar conformations, respectively, and are nearly perpendicular to each other. The 5'-thymine base is hydrogen-bonded to Arg95H and Ser96H, and is in van der Waals contact with Tyr100iH. The 3'-pyrimidone base is hydrogen-bonded to His35H, and is in contact with Trp33H. Three water molecules are located at the interface between the bases and the Fab residues. Hydrogen bonds involving these water molecules also contribute to Fab recognition of the dT(6-4)T bases. The sugar-phosphate backbone connecting the bases is surrounded by residues His27dL, Tyr32L, Ser92L, Trp33H, and Ser58H, but is not hydrogen-bonded to these residues.     

Crystal structures of the 64M-2 and 64M-3 antibody Fabs complexed with DNA (6-4) photoproducts.

Crystal structures of the 64M-2 antibody Fab fragment complexed with DNA photoproducts of dT(6-4)T and dTT(6-4)TT, and of the 64M-3 Fab fragment complexed with dT(6-4)T were determined. The 5'-thymine base of the bound dT(6-4)T ligand is in a half-chair conformation, and its base plane is nearly perpendicular to the planar 3'-pyrimidone base. The 64M-2 and 64M-3 Fabs have a common structure suitable for accommodating the dT(6-4)T ligand. In each of the antigen binding sites of the 64M-2 and 64M-3 Fabs, basic residues of His 35H and Arg 95H are located at the bottom of the binding pocket, and are hydrogen-bonded to the base moieties of dT(6-4)T. Two water molecules are involved in the interactions that intervene between the base moieties and the binding site. Aromatic residues of Trp 33H and Tyr 100iH form a side-wall of the pocket and are in van der Waals interactions with the base moieties. The Trp 33H side-chain is placed in parallel to the 3'-pyrimidone base, and the Tyr 100iH side-chain is nearly perpendicular to the 5'-thymine base. His 27dL, Tyr 32L, Leu 93L, and Ser 58H forming another side-wall are located in the vicinity of the sugar-phosphate backbone. In the 64M-2 Fab complex with dTT(6-4)TT, 5'- and 3'-side phosphate groups are also involved in interaction with Fab residues.     

Crystal structure of an anti-interleukin-2 monoclonal antibody Fab complexed with an antigenic nonapeptide

The three-dimensional structure of the Fab fragment of a monoclonal antibody (LNKB-2) to human interleukin-2 (IL-2) complexed with a synthetic antigenic nonapeptide, Ac-Lys-Pro-Leu-Glu-Glu-Val-Leu-Asn-Leu-OMe, has been determined at 3.0 A resolution. In the structure, four out of the six hypervariable loops of the Fab (complementarity determining regions [CDRs] L1, H1, H2, and H3) are involved in peptide association through hydrogen bonding, salt bridge formation, and hydrophobic interactions. The Tyr residues in the Fab antigen binding site play a major role in antigen-antibody recognition. The structures of the complexed and uncomplexed Fab were compared. In the antigen binding site the CDR-L1 loop of the antibody shows the largest structural changes upon peptide binding. The peptide adopts a mostly alpha-helical conformation similar to that in the epitope fragment 64-72 of the IL-2 antigen. The side chains of residues Leu 66, Val 69, and Leu 70, which are shielded internally in the IL-2 structure, are involved in interactions with the Fab in the complex studied. This indicates that antibody-antigen complexation involves a significant rearrangement of the epitope-containing region of the IL-2 with retention of the alpha-helical character of the epitope fragment.     

Analysis of a nucleic-acid-binding antibody fragment: construction and characterization of heavy-chain complementarity-determining region switch variants

The display of antibody (Ab) fragments (Fab) on the surface of filamentous bacteriophage (phage) and selection of phage that interact with a particular antigen (Ag) has enabled the isolation of Fab that bind nucleic acids. Nucleic acid (NA) binding Ab occur in vivo in connective tissue disease patients and certain inbred strains of mice and are thought to be pathogenic. Although there is ample data concerning the amino acid (aa) sequence of murine monoclonal Ab (mAb) reactive with DNA, significantly less is known about how autoAb interact with NA. The complementarity-determining regions (CDR) contained in the Fab contribute the most to Ag binding, especially through heavy (H)-chain CDR 3. We have examined the role of individual H-chain CDR of a previously isolated recombinant single-stranded DNA-binding Fab (DNA-1) in nucleic acid interaction using a combination of H-chain CDR switching and solution-binding experiments. The three H-chain CDR of DNA-1 Fab were independently switched with the H-chain CDR of a Fab (D5) with very similar sequence and framework (FR) that binds DNA poorly in order to create all possible H-chain CDR combinations. The chimeric Fab genes were bacterially expressed, and their products were purified and analyzed. Results indicated that the H-chain CDR 3 of DNA-1 Fab, in the context of the remainder of the H-chain of D5 Fab, restored binding to oligo(dT)₁₅ to 60% of DNA-1 levels, whereas H-chain CDR 1 and 3 of DNA-1 with CDR 2 of D5 Fab restored binding to 100%. A combination of H-chain CDR 2 and 3 of DNA-1 Fab with H-chain CDR 1 of D5, unexpectedly resulted in the ability of the chimeric Fab to bind RNA preferentially over DNA. These studies demonstrate the importance of both H-chain CDR 1 and 3 in DNA recognition and further suggest that the specificity of the type of NA recognized by a particular Fab can be drastically altered by exchanging CDR.     

V region sequences of anti-DNA and anti-RNA autoantibodies from NZB/NZW F1 mice

The V region sequences of two anti-DNA (A52, D42) and two anti-RNA (D44, D444) autoantibodies, derived from lupus prone NZB/NZW F1 female mice, were determined by mRNA sequencing. The sequences had the following features: 1) there was no clear sequence relationship between anti-DNA and anti-RNA antibodies; 2) there were no major similarities between any of the L chain sequences and each VL gene segment belonged to a different mouse VK subgroup; 3) the H chains of the two anti-RNA antibodies showed closely related sequences of VH gene segments and very similar third complementarity determining regions (CDR3); 4) the H chains of the two anti-DNA antibodies had VH segments belonging to different VH gene families but had a unique and similar combination of D segments and junctional sequences, suggesting a common recognition element for Ag and/or for idiotypic regulation in the H chain CDR3; and 5) the VH gene segment of one anti-DNA antibody (D42) was found to be very similar to the VH gene segment of a CBA mouse hybridoma antibody (6G6) which binds to the environmental Ag phosphocholine. The three-dimensional structure of the Fv-region of the anti-DNA antibody (D42) was modeled by computer and a stretch of poly(dT), ssDNA was docked to a cleft in the antibody combining site, formed by the three H chain CDR and by CDR1 and CDR3 of the L chain. The cleft is characterized by a preponderance of arginine and tyrosine residues, lining both the walls and base of the cleft.     

Recognition of nucleic acid bases and base-pairs by hydrogen bonding to amino acid side-chains

Sequence-specific protein-nucleic acid recognition is determined, in part, by hydrogen bonding interactions between amino acid side-chains and nucleotide bases. To examine the repertoire of possible interactions, we have calculated geometrically plausible arrangements in which amino acids hydrogen bond to unpaired bases, such as those found in RNA bulges and loops, or to the 53 possible RNA base-pairs. We find 32 possible interactions that involve two or more hydrogen bonds to the six unpaired bases (including protonated A and C), 17 of which have been observed. We find 186 "spanning" interactions to base-pairs in which the amino acid hydrogen bonds to both bases, in principle allowing particular base-pairs to be selectively targeted, and nine of these have been observed. Four calculated interactions span the Watson-Crick pairs and 15 span the G:U wobble pair, including two interesting arrangements with three hydrogen bonds to the Arg guanidinum group that have not yet been observed. The inherent donor-acceptor arrangements of the bases support many possible interactions to Asn (or Gln) and Ser (or Thr or Tyr), few interactions to Asp (or Glu) even though several already have been observed, and interactions to U (or T) only if the base is in an unpaired context, as also observed in several cases. This study highlights how complementary arrangements of donors and acceptors can contribute to base-specific recognition of RNA, predicts interactions not yet observed, and provides tools to analyze proposed contacts or design novel interactions.     

Antibody-nucleic acid complexes. Oligo(dG)n and -(dT)n specificities associated with anti-DNA antibodies from autoimmune MRL mice

The specificity of anti-DNA antibodies in the sera of unimmunized autoimmune MRL mice was initially assessed via an enzyme-linked immunosorbent assay (ELISA). Antibody binding profiles to a panel of immobilized antigens (AMP-, GMP-, CMP-, UMP-, and TMP-BSA, ss- and dsDNA) demonstrated high levels of immunoglobulins reacting with GMP and ssDNA and intermediate levels with AMP, TMP, and dsDNA. Fractionation of serum anti-DNA antibodies into subsets on the basis of their binding to GMP- and TMP-agarose indicated that the resulting GMP- or TMP-reactive antibodies bound to their homologous nucleotides and ssDNA. Competition-inhibition studies with soluble mono-, oligo-, and polynucleotides revealed that GMP- and TMP-reactive antibodies were highly specific for oligo(dG)n and -(dT)n sequences, respectively. Whereas the relative affinity of TMP-reactive autoantibodies to oligo(dT)n increased with oligonucleotide length (n = 2, 4, 6, 8, 10, 15), GMP-reactive antibodies preferentially recognized oligo(dG)10 (Ka congruent to 1 x 10(7) M-1). While neither antibody recognized oligo(dA)8 and -(dC)8 competitors, mixed-base oligonucleotides were inhibitory at concentrations approximately 10-fold greater than similarly sized oligo(dG)n and -(dT)n sequences. Similar characterizations of both pooled and individual MRL sera indicated that anti-DNA antibodies represent 8-10% of the total serum IgG. More importantly, GMP-reactive autoantibodies predominated and accounted for 60-70% of the entire unbound anti-DNA antibody population.     

Molecular dynamics of immune complex of photoadduct-containing DNA with Fab-Anti-DNA antibody fragment

Antibodies to DNA play an important role in the pathogenesis of autoimmune diseases. The elucidation of structural mechanisms of both the antigen recognition and the interaction of anti-DNA antibodies with DNA will help to understand the role of DNA-containing immune complexes in various pathologies and can provide a basis for new treatment modalities. Moreover, the DNA-antibody complex is an analog of specific intracellular DNA-protein interactions. In this work, we used in silico molecular dynamic simulations of bimolecular complexes of the dsDNA segment containing the Fab fragment of an anti-DNA antibody to obtain the detailed thermodynamic and structural characteristics of dynamic intermolecular interactions. Using computationally modified crystal structure of the Fab-DNA complex (PDB ID: 3VW3), we studied the equilibrium molecular dynamics of the 64M-5 antibody Fab fragment associated with the dsDNA fragment containing the thymine dimer, the product of DNA photodamage. Amino acid residues that constitute paratopes and the complementary nucleotide epitopes for the Fab-DNA construct were identified. Stacking and electrostatic interactions were found to play the main role in mediating the most specific antibodydsDNA contacts, while hydrogen bonds were less significant. These findings may shed light on the formation and properties of pathogenic anti-DNA antibodies in autoimmune diseases, such as systemic lupus erythematosus associated with skin photosensitivity and DNA photodamage.     

Molecular features of the broadly neutralizing immunoglobulin G1 b12 required for recognition of human immunodeficiency virus type 1 gp120

IgG1 b12 is a broadly neutralizing antibody against human immunodeficiency virus type 1 (HIV-1). The epitope recognized by b12 overlaps the CD4 receptor-binding site (CD4bs) on gp120 and has been a target for vaccine design. Determination of the three-dimensional structure of immunoglobulin G1 (IgG1) b12 allowed modeling of the b12-gp120 interaction in which the protruding third complementarity-determining region (CDR) of the heavy chain (H3) was crucial for antibody binding. In the present study, extensive mutational analysis of the antigen-binding site of Fab b12 was carried out to investigate the validity of the model and to identify residues important for gp120 recognition and, by inference, key to the anti-HIV-1 activity of IgG1 b12. In all, 50 mutations were tested: 40 in H3, 4 each in H2 and L1, and 2 in L3. The results suggest that the interaction of gp120 with H3 of b12 is crucially dependent not only on a Trp residue at the apex of the H3 loop but also on a number of residues at the base of the loop. The arrangement of these residues, including aromatic side chains and side chains that hydrogen bond across the base of the loop, may rigidify H3 for penetration of the recessed CD4-binding cavity. The results further emphasize the importance to gp120 binding of a Tyr residue at the apex of the H2 loop that forms a second finger-like structure and a number of Arg residues in L1 that form a positively charged, shelf-like structure. In general, the data are consistent with the b12-gp120 interaction model previously proposed. At the gene level, somatic mutation is seen to be crucial for the generation of many of the structural features described. The Fab b12 mutants were also tested against the b12 epitope-mimic peptide B2.1, and the reactivity profile had many similarities but also significant differences from that observed for gp120. The paratope map of b12 may facilitate the design of molecules that are able to elicit b12-like activities.     

Structural basis for recognition of CD20 by therapeutic antibody Rituximab

Rituximab is a widely used monoclonal antibody drug for treating certain lymphomas and autoimmune diseases. To understand the molecular mechanism of recognition of human CD20 by Rituximab, we determined the crystal structure of the Rituximab Fab in complex with a synthesized peptide comprising the CD20 epitope (residues 163-187) at 2.6-A resolution. The combining site of the Fab consists of four complementarity determining regions that form a large, deep pocket to accommodate the epitope peptide. The bound peptide assumes a unique cyclic conformation that is constrained by a disulfide bond and a rigid proline residue (Pro(172)). The (170)ANPS(173) motif of CD20 is deeply embedded into the pocket on the antibody surface and plays an essential role in the recognition and binding of Rituximab. The antigen-antibody interactions involve both hydrogen bonds and van der Waals contacts and display a high degree of structural and chemical complementarity. These results provide a molecular basis for the specific recognition of CD20 by Rituximab as well as valuable information for development of improved antibody drugs with better specificity and higher affinity.     

Structural insights into steroid hormone binding: the crystal structure of a recombinant anti-testosterone Fab fragment in free and testosterone-bound forms.

The monoclonal anti-testosterone antibody (3-C(4)F(5)) has a relatively high affinity (3 x 10(8) m(-1)) with an overall good specificity profile. However, the earlier characterized binding properties have shown that both the affinity and specificity of this antibody must be improved if it is intended for use in clinical immunoassays. In this paper, the crystal structures of the recombinant anti-testosterone (3-C(4)F(5)) Fab fragment have been determined in the testosterone-bound and free form at resolutions of 2.60 and 2.72 A, respectively. The high affinity binding of the (3-C(4)F(5)) Fab is mainly determined by shape complementarity between the protein and testosterone. Only one direct hydrogen bond is formed between the hydroxyl group of the testosterone D-ring and the main-chain oxygen of Gly100(J)H. The testosterone is deeply bound in a hydrophobic pocket, and the close shape complementarity is mainly formed by the third complementarity-determining regions (CDR) of the heavy and light chain. Comparison of the bound structure with the free structure indicates conformational changes in the protein upon testosterone binding. The conformational changes of the side chains of two residues Glu95H and Tyr99H in the CDR-H3 are particularly essential for the binding. Interesting similarities in the binding of different steroids were also observed upon comparison of the available structures of anti-steroid antibodies.     

An anti-urokinase plasminogen activator receptor (uPAR) antibody: crystal structure and binding epitope

Human urokinase-type plasminogen activator receptor (uPAR/CD87) is expressed at the invasive interface of the tumor-stromal microenvironment in many human cancers and interacts with a wide array of extracellular molecules. An anti-uPAR antibody (ATN615) was prepared using hybridoma technology. This antibody binds to uPAR in vitro with high affinity (K(d) approximately 1 nM) and does not interfere with uPA binding to uPAR. Here we report the crystal structure of the Fab fragment of ATN615 at 1.77 A and the analysis of ATN615-suPAR-ATF structure that was previously determined, emphasizing the ATN615-suPAR interaction. The complementarity determining regions (CDRs) of ATN615 consist of a high percentage of aromatic residues, and form a relatively flat and undulating surface. The ATN615 Fab fragment recognizes domain 3 of suPAR. The antibody-antigen recognition involves 11 suPAR residues and 12 Fab residues from five CDRs. Structural data suggest that Pro188, Asn190, Gly191, and Arg192 residues of uPAR are the key residues for the antibody recognition, while Pro189 and Arg192 render specificity of ATN615 for human uPAR. Interestingly, this antibody-antigen interface has a small contact area, mainly polar interaction with little hydrophobic character, yet has high binding strength. Furthermore, several solvent molecules (assigned as polyethylene glycols) were clearly visible in the binding interface between antibody and antigen, suggesting that solvent molecules may be important for the maximal binding between suPAR and ATN615 Fab. ATN615 undergoes small but noticeable changes in its CDR region upon antigen binding.     

Structural and functional insights into the anti-BACE1 Fab fragment that recognizes the BACE1 exosite

A molecular modeling study giving structural, functional, and mutagenesis insights into the anti-BACE1 Fab fragment that recognizes the BACE1 exosite is reported. Our results allow extending experimental data resulting from X-ray diffraction experiments in order to examine unknown aspects for the Fab-BACE1 recognition and its binding mode. Thus, the study performed here allows extending the inherently static nature of crystallographic structures in order to gain a deeper understanding of the structural and dynamical basis at the atomic level. The characteristics and strength of the interatomic interactions involved in the immune complex formation are exhaustively analyzed. The results might explain how the anti-BACE1 Fab fragment and other BACE1 exosite binders are capable to produce an allosteric modulation of the BACE1 activity. Our site-directed mutagenesis study indicated that the functional anti-BACE1 paratope, residues Tyr32 (H1), Trp50 (H2), Arg98 (H3), Phe101 (H3), Trp104 (H3) and Tyr94 (L3), strongly dominates the binding energetics with the BACE1 exosite. The mutational studies described in this work might accelerate the development of new BACE1 exosite binders with interesting pharmacological activity.     

Characterization of the electrophile binding site and substrate binding mode of the 26-kDa glutathione S-transferase from Schistosoma japonicum

The 26-kDa glutathione S-transferase from Schistosoma japonicum (Sj26GST), a helminth worm that causes schistosomiasis, catalyzes the conjugation of glutathione with toxic secondary products of membrane lipid peroxidation. Crystal structures of Sj26GST in complex with glutathione sulfonate (Sj26GSTSLF), S-hexyl glutathione (Sj26GSTHEX), and S-2-iodobenzyl glutathione (Sj26GSTIBZ) allow characterization of the electrophile binding site (H site) of Sj26GST. The S-hexyl and S-2-iodobenzyl moieties of these product analogs bind in a pocket defined by side-chains from the beta1-alpha1 loop (Tyr7, Trp8, Ile10, Gly12, Leu13), helix alpha4 (Arg103, Tyr104, Ser107, Tyr111), and the C-terminal coil (Gln204, Gly205, Trp206, Gln207). Changes in the Ser107 and Gln204 dihedral angles make the H site more hydrophobic in the Sj26GSTHEX complex relative to the ligand-free structure. These structures, together with docking studies, indicate a possible binding mode of Sj26GST to its physiologic substrates 4-hydroxynon-2-enal (4HNE), trans-non-2-enal (NE), and ethacrynic acid (EA). In this binding mode, hydrogen bonds of Tyr111 and Gln207 to the carbonyl oxygen atoms of 4HNE, NE, and EA could orient the substrates and enhance their electrophilicity to promote conjugation with glutathione.     

Molecular recognition of oligosaccharide epitopes by a monoclonal Fab specific for Shigella flexneri Y lipopolysaccharide: X-ray structures and thermodynamics

The antigenic recognition of Shigella flexneri O-polysaccharide, which consists of a repeating unit ABCD [-->2)-alpha-L-Rhap-(1-->2)-alpha-L-Rhap-(1-->3)-alpha-L-Rhap-(1-->3)-beta-D-GlcpNAc-(1-->], by the monoclonal antibody SYA/J6 (IgG3, kappa) has been investigated by crystallographic analysis of the Fab domain and its two complexes with two antigen segments (a pentasaccharide Rha A-Rha B-Rha C-GlcNAc D-Rha A' and a modified trisaccharide Rha B-Rha C-GlcNAc D in which Rha C* is missing a C2-OH group). These complex structures, the first for a Fab specific for a periodic linear heteropolysaccharide, reveal a binding site groove (between the V(H) and V(L) domains) that makes polar and nonpolar contacts with all the sugar residues of the pentasaccharide. Both main-chain and side-chain atoms of the Fab are used in ligand binding. The charged side chain of Glu H50 of CDR H2 forms crucial hydrogen bonds to GlcNAc of the oligosaccharides. The modified trisaccharide is more buried and fits more snugly than the pentasaccharide. It also makes as many contacts (approximately 75) with the Fab as the pentasaccharide, including the same number of hydrogen bonds (eight, with four being identical). It is further engaged in more hydrophobic interactions than the pentasaccharide. These three features favorable to trisaccharide binding are consistent with the observation of a tighter complex with the trisaccharide than the pentasaccharide. Thermodynamic data demonstrate that the native tri- to pentasaccharides have free energies of binding in the range of 6.8-7.4 kcal mol(-1), and all but one of the hydrogen bonds to individual hydroxyl groups provide no more than approximately 0.7 kcal mol(-1). They further indicate that hydrophobic interactions make significant contributions to binding and, as the native epitope becomes larger across the tri-, tetra-, pentasaccharide series, entropy contributions to the free energy become dominant.     

Three-dimensional structures of the free and antigen-bound Fab from monoclonal antilysozyme antibody HyHEL-63(,)

Antigen-antibody complexes provide useful models for studying the structure and energetics of protein-protein interactions. We report the cloning, bacterial expression, and crystallization of the antigen-binding fragment (Fab) of the anti-hen egg white lysozyme (HEL) antibody HyHEL-63 in both free and antigen-bound forms. The three-dimensional structure of Fab HyHEL-63 complexed with HEL was determined to 2.0 A resolution, while the structure of the unbound antibody was determined in two crystal forms, to 1.8 and 2.1 A resolution. In the complex, 19 HyHEL-63 residues from all six complementarity-determining regions (CDRs) of the antibody contact 21 HEL residues from three discontinuous polypeptide segments of the antigen. The interface also includes 11 bound water molecules, 3 of which are completely buried in the complex. Comparison of the structures of free and bound Fab HyHEL-63 reveals that several of the ordered water molecules in the free antibody-combining site are retained and that additional waters are added upon complex formation. The interface waters serve to increase shape and chemical complementarity by filling cavities between the interacting surfaces and by contributing to the hydrogen bonding network linking the antigen and antibody. Complementarity is further enhanced by small (<3 A) movements in the polypeptide backbones of certain antibody CDR loops, by rearrangements of side chains in the interface, and by a slight shift in the relative orientation of the V(L) and V(H) domains. The combining site residues of complexed Fab HyHEL-63 exhibit reduced temperature factors compared with those of the free Fab, suggesting a loss in conformational entropy upon binding. To probe the relative contribution of individual antigen residues to complex stabilization, single alanine substitutions were introduced in the epitope of HEL recognized by HyHEL-63, and their effects on antibody affinity were measured using surface plasmon resonance. In agreement with the crystal structure, HEL residues at the center of the interface that are buried in the complex contribute most to the binding energetics (DeltaG(mutant) - DeltaG(wild type) > 3.0 kcal/mol), whereas the apparent contributions of solvent-accessible residues at the periphery are much less pronounced (<1.5 kcal/mol). In the latter case, the mutations may be partially compensated by local rearrangements in solvent structure that help preserve shape complementarity and the interface hydrogen bonding network.     

Aromatic residues and neighboring Arg414 in the (6R)-5,6,7, 8-tetrahydro-L-biopterin binding site of full-length neuronal nitric-oxide synthase are crucial in catalysis and heme reduction with NADPH

Nitric-oxide synthase (NOS) requires the cofactor, (6R)-5,6,7, 8-tetrahydrobiopterin (H4B), for catalytic activity. The crystal structures of NOSs indicate that H4B is surrounded by aromatic residues. We have mutated the conserved aromatic acids, Trp(676), Trp(678), Phe(691), His(692), and Tyr(706), together with the neighboring Arg(414) residue within the H4B binding region of full-length neuronal NOS. The W676L, W678L, and F691L mutants had no NO formation activity and had very low heme reduction rates (<0.02 min(-1)) with NADPH. Thus, it appears that Trp(676), Trp(678), and Phe(691) are important to retain the appropriate active site conformation for H4B/l-Arg binding and/or electron transfer to the heme from NADPH. The mutation of Tyr(706) to Leu and Phe decreased the activity down to 13 and 29%, respectively, of that of the wild type together with a dramatically increased EC(50) value for H4B (30-40-fold of wild type). The Tyr(706) phenol group interacts with the heme propionate and Arg(414) amine via hydrogen bonds. The mutation of Arg(414) to Leu and Glu resulted in the total loss of NO formation activity and of the heme reduction with NADPH. Thus, hydrogen bond networks consisting of the heme carboxylate, Tyr(706), and Arg(414) are crucial in stabilizing the appropriate conformation(s) of the heme active site for H4B/l-Arg binding and/or efficient electron transfer to occur.     

Crystallographic study of mechanism of ribonuclease T1-catalysed specific RNA hydrolysis

Ribonuclease T1 (RNase T1) cleaves the phosphodiester bond of RNA specifically at the 3'-end of guanosine. 2'-guanosinemonophosphate (2'-GMP) acts as inhibitor for this reaction and was cocrystallized with RNase T1. X-Ray analysis provided insight in the geometry of the active site and in the parts of the enzyme involved in the recognition of guanosine. RNase T1 is globular in shape and consists of a 4.5 turns alpha-helix lying "below" a four-stranded antiparallel beta-sheet containing recognition center as well as active site. The latter is indicated by the position of phosphate and sugar residues of 2'-GMP and shows that Glu58, His92 and Arg77 are active in phosphodiester hydrolysis. Guanine is recognized by a stretch of protein from Tyr42 to Tyr45. Residues involved in recognition are peptide NH and C = O, guanine O6 and N1H which form hydrogen bonds and a stacking interaction of Tyr45 on guanine. Although, on a theoretical basis, many specific amino acid-guanine interactions are possible, none is employed in the RNase T1.guanine recognition.