Customized optical mapping by CRISPR–Cas9 mediated DNA labeling with multiple sgRNAs

Whole-genome mapping technologies have been developed as a complementary tool to provide scaffolds for genome assembly and structural variation analysis (1,2). We recently introduced a novel DNA labeling strategy based on a CRISPR–Cas9 genome editing system, which can target any 20bp sequences. The labeling strategy is specifically useful in targeting repetitive sequences, and sequences not accessible to other labeling methods. In this report, we present customized mapping strategies that extend the applications of CRISPR–Cas9 DNA labeling. We first design a CRISPR–Cas9 labeling strategy to interrogate and differentiate the single allele differences in NGG protospacer adjacent motifs (PAM sequence). Combined with sequence motif labeling, we can pinpoint the single-base differences in highly conserved sequences. In the second strategy, we design mapping patterns across a genome by selecting sets of specific single-guide RNAs (sgRNAs) for labeling multiple loci of a genomic region or a whole genome. By developing and optimizing a single tube synthesis of multiple sgRNAs, we demonstrate the utility of CRISPR–Cas9 mapping with 162 sgRNAs targeting the 2Mb Haemophilus influenzae chromosome. These CRISPR–Cas9 mapping approaches could be particularly useful for applications in defining long-distance haplotypes and pinpointing the breakpoints in large structural variants in complex genomes and microbial mixtures.     

利用CRISPR/Cas9对基因组中高度同源DNA片段编辑多样性的遗传学研究

在基因组中,编码区存在许多高度相似的基因簇或基因群(多拷贝基因),非编码区也存在大量的重复序列。这些重复序列能通过改变染色体的三维结构调控基因的转录,对于生物体的遗传与进化起到了重要的作用。其高度同源的特征使得利用CRISPR/Cas9技术进行基因组编辑时面临更加复杂的状况。如果编辑的片段是二倍体或多倍体,还会产生各条染色单体上的编辑情况不相同的现象。为此本文选择了2个位于同一染色体相距11 kb的高度同源300 bp片段(L1和L2)进行CRISPR介导的DNA片段编辑。采用一对sgRNA(分别共同靶向两片段的上、下游位点)引导Cas9对HepG2细胞两个高度相似的DNA片段进行切割。片段编辑的细胞进一步单克隆化后,对获得的22个L1/L2编辑的CRISPR单克隆细胞株进行详细的基因型鉴定。结果发现除了这两个DNA片段本身被删除外,它们之间的大片段也存在被删除的现象,三个片段的各种反转组合也很频繁。该研究结果对于采用CRISPR/Cas9系统编辑多拷贝基因或重复序列,尤其是对二倍体或多倍体生物进行基因组编辑时具有重要的借鉴和参考价值。     

Targeted Heritable Mutation and Gene Conversion by Cas9-CRISPR in Caenorhabditis elegans

We have achieved targeted heritable genome modification in Caenorhabditis elegans by injecting mRNA of the nuclease Cas9 and Cas9 guide RNAs. This system rapidly creates precise genomic changes, including knockouts and transgene-instructed gene conversion.     

利用CRISPR/Cas9技术对人多能干细胞进行高效基因组编辑

CRISPR/Cas9技术提供了一个全新的基因组编辑体系。本文利用CRISPR/Cas9平台,在人胚胎干细胞株中对选取的一段特定基因组区域进行了多种基因组编辑：通过在基因编码框中引入移码突变进行基因敲除;通过单链DNA提供外源模板经由同源重组定点敲入FLAG序列;通过同时靶向多个位点诱导基因组大片段删除。研究结果表明CRISPR/Cas9可以对多能干细胞进行高效基因编辑,获得的突变干细胞株有助于对基因和基因组区域的功能进行分析和干细胞疾病模型的建立。     

CRISPR immunity relies on the consecutive binding and degradation of negatively supercoiled invader DNA by Cascade and Cas3

The prokaryotic CRISPR/Cas immune system is based on genomic loci that contain incorporated sequence tags from viruses and plasmids. Using small guide RNA molecules, these sequences act as a memory to reject returning invaders. Both the Cascade ribonucleoprotein complex and the Cas3 nuclease/helicase are required for CRISPR interference in Escherichia coli, but it is unknown how natural target DNA molecules are recognized and neutralized by their combined action. Here we show that Cascade efficiently locates target sequences in negatively supercoiled DNA, but only if these are flanked by a protospacer-adjacent motif (PAM). PAM recognition by Cascade exclusively involves the crRNA-complementary DNA strand. After Cascade-mediated R loop formation, the Cse1 subunit recruits Cas3, which catalyzes nicking of target DNA through its HD-nuclease domain. The target is?then progressively unwound and cleaved by the joint ATP-dependent helicase activity and Mg(2+)-dependent HD-nuclease activity of Cas3, leading to complete target DNA degradation and invader neutralization.     

Structure and specificity of the RNA-guided endonuclease Cas9 during DNA interrogation,target binding and cleavage

CRISPR-associated endonuclease Cas9 cuts DNA at variable target sites designated by a Cas9-bound RNA molecule. Cas9''s ability to be directed by single ‘guide RNA’ molecules to target nearly any sequence has been recently exploited for a number of emerging biological and medical applications. Therefore, understanding the nature of Cas9''s off-target activity is of paramount importance for its practical use. Using atomic force microscopy (AFM), we directly resolve individual Cas9 and nuclease-inactive dCas9 proteins as they bind along engineered DNA substrates. High-resolution imaging allows us to determine their relative propensities to bind with different guide RNA variants to targeted or off-target sequences. Mapping the structural properties of Cas9 and dCas9 to their respective binding sites reveals a progressive conformational transformation at DNA sites with increasing sequence similarity to its target. With kinetic Monte Carlo (KMC) simulations, these results provide evidence of a ‘conformational gating’ mechanism driven by the interactions between the guide RNA and the 14th–17th nucleotide region of the targeted DNA, the stabilities of which we find correlate significantly with reported off-target cleavage rates. KMC simulations also reveal potential methodologies to engineer guide RNA sequences with improved specificity by considering the invasion of guide RNAs into targeted DNA duplex.     

The CRISPR/Cas system can be used as nuclease for in planta gene targeting and as paired nickases for directed mutagenesis in Arabidopsis resulting in heritable progeny

The CRISPR/Cas nuclease is becoming a major tool for targeted mutagenesis in eukaryotes by inducing double‐strand breaks (DSBs) at pre‐selected genomic sites that are repaired by non‐homologous end joining (NHEJ) in an error‐prone way. In plants, it could be demonstrated that the Cas9 nuclease is able to induce heritable mutations in Arabidopsis thaliana and rice. Gene targeting (GT) by homologous recombination (HR) can also be induced by DSBs. Using a natural nuclease and marker genes, we previously developed an in planta GT strategy in which both a targeting vector and targeting locus are activated simultaneously via DSB induction during plant development. Here, we demonstrate that this strategy can be used for natural genes by CRISPR/Cas‐mediated DSB induction. We were able to integrate a resistance cassette into the ADH1 locus of A. thaliana via HR. Heritable events were identified using a PCR‐based genotyping approach, characterised by Southern blotting and confirmed on the sequence level. A major concern is the specificity of the CRISPR/Cas nucleases. Off‐target effects might be avoided using two adjacent sgRNA target sequences to guide the Cas9 nickase to each of the two DNA strands, resulting in the formation of a DSB. By amplicon deep sequencing, we demonstrate that this Cas9 paired nickase strategy has a mutagenic potential comparable with that of the nuclease, while the resulting mutations are mostly deletions. We also demonstrate the stable inheritance of such mutations in A. thaliana.     

Endophytic bacterial communities in in vitro shoot cultures derived from embryonic tissue of hybrid walnut (<Emphasis Type="Italic">Juglans</Emphasis> × <Emphasis Type="Italic">intermedia</Emphasis>)

The clustered regularly interspaced short palindromic repeat (CRISPR)/CRISPR-associated protein 9 nuclease (Cas9) system has emerged as the robust gene editing tool that functions through the double-stranded break repair process leading to targeted mutagenesis in higher genomes. CRISPR/Cas9 has been simplified to a two component system consisting of a single guide RNA (gRNA) that binds Cas9 to target genomic sites in sequence-dependent manner. This RNA-guided nuclease system has mostly been applied for inducing point mutations or short insertion-deletions at one or multiple loci. The present study addressed the utility of this system for excising marker genes from plant genomes, an application highly relevant for developing marker-free transgenic plants. A transgenic rice line expressing β-glucuronidase (GUS) gene was transformed by Agrobacterium or gene gun with a construct expressing Cas9 and two gRNAs to target each end of 1.6 kb GUS gene. Molecular analysis of the transformed lines detected excision at low frequency in the callus lines, but at significantly higher frequency in plant lines, indicating robust efficiency of Cas9:gRNA in regenerated plants. Bi-allelic excisions were observed in plants derived from three independent events, allowing recovery of homozygous excision lines in the first generation (T₀). Notably, the excision in different plant lines was formed by precise cut and ligation of the two blunt ends without mutation at or around the excision site. Since the goal of marker-removal technologies is to precisely excise a defined piece of DNA without introducing mutations in the adjacent sequences, Cas9:gRNA system could be an effective tool for producing marker-free plants.     

Genome editing in mammalian cells using the CRISPR type I-D nuclease

Adoption of CRISPR–Cas systems, such as CRISPR–Cas9 and CRISPR–Cas12a, has revolutionized genome engineering in recent years; however, application of genome editing with CRISPR type I—the most abundant CRISPR system in bacteria—remains less developed. Type I systems, such as type I-E, and I-F, comprise the CRISPR-associated complex for antiviral defense (‘Cascade’: Cas5, Cas6, Cas7, Cas8 and the small subunit) and Cas3, which degrades the target DNA; in contrast, for the sub-type CRISPR–Cas type I-D, which lacks a typical Cas3 nuclease in its CRISPR locus, the mechanism of target DNA degradation remains unknown. Here, we found that Cas10d is a functional nuclease in the type I-D system, performing the role played by Cas3 in other CRISPR–Cas type I systems. The type I-D system can be used for targeted mutagenesis of genomic DNA in human cells, directing both bi-directional long-range deletions and short insertions/deletions. Our findings suggest the CRISPR–Cas type I-D system as a unique effector pathway in CRISPR that can be repurposed for genome engineering in eukaryotic cells.     

CRISPcut: A novel tool for designing optimal sgRNAs for CRISPR/Cas9 based experiments in human cells

The ability to direct the CRISPR/Cas9 nuclease to a unique target site within a genome would have broad use in targeted genome engineering. However, CRISPR RNA is reported to bind to other genomic locations that differ from the intended target site by a few nucleotides, demonstrating significant off-target activity. We have developed the CRISPcut tool that screens the off-targets using various parameters and predicts the ideal genomic target for –guide RNAs in human cell lines. sgRNAs for four different types of Cas9 nucleases can be designed with an option for the user to work with different PAM sequences. Direct experimental measurement of genome-wide DNA accessibility is incorporated that effectively restricts the prediction of CRISPR targets to open chromatin. An option to predict target sites for paired CRISPR nickases is also provided. The tool has been validated using a dataset of experimentally used sgRNA and their identified off-targets.URL: http://web.iitd.ac.in/crispcut     

Optimization of Genome Engineering Approaches with the CRISPR/Cas9 System

Designer nucleases such as TALENS and Cas9 have opened new opportunities to scarlessly edit the mammalian genome. Here we explored several parameters that influence Cas9-mediated scarless genome editing efficiency in murine embryonic stem cells. Optimization of transfection conditions and enriching for transfected cells are critical for efficiently recovering modified clones. Paired gRNAs and wild-type Cas9 efficiently create programmed deletions, which facilitate identification of targeted clones, while paired gRNAs and the Cas9D10A nickase generated smaller targeted indels with lower chance of off-target mutagenesis. Genome editing is also useful for programmed introduction of exogenous DNA sequences at a target locus. Increasing the length of the homology arms of the homology-directed repair template strongly enhanced targeting efficiency, while increasing the length of the DNA insert reduced it. Together our data provide guidance on optimal design of scarless gene knockout, modification, or knock-in experiments using Cas9 nuclease.     

Microbial single-strand annealing proteins enable CRISPR gene-editing tools with improved knock-in efficiencies and reduced off-target effects

Several existing technologies enable short genomic alterations including generating indels and short nucleotide variants, however, engineering more significant genomic changes is more challenging due to reduced efficiency and precision. Here, we developed RecT Editor via Designer-Cas9-Initiated Targeting (REDIT), which leverages phage single-stranded DNA-annealing proteins (SSAP) RecT for mammalian genome engineering. Relative to Cas9-mediated homology-directed repair (HDR), REDIT yielded up to a 5-fold increase of efficiency to insert kilobase-scale exogenous sequences at defined genomic regions. We validated our REDIT approach using different formats and lengths of knock-in templates. We further demonstrated that REDIT tools using Cas9 nickase have efficient gene-editing activities and reduced off-target errors, measured using a combination of targeted sequencing, genome-wide indel, and insertion mapping assays. Our experiments inhibiting repair enzyme activities suggested that REDIT has the potential to overcome limitations of endogenous DNA repair steps. Finally, our REDIT method is applicable across cell types including human stem cells, and is generalizable to different Cas9 enzymes.     

High-throughput single-nucleotide structural mapping by capillary automated footprinting analysis

The use of capillary electrophoresis with fluorescently labeled nucleic acids revolutionized DNA sequencing, effectively fueling the genomic revolution. We present an application of this technology for the high-throughput structural analysis of nucleic acids by chemical and enzymatic mapping ('footprinting'). We achieve the throughput and data quality necessary for genomic-scale structural analysis by combining fluorophore labeling of nucleic acids with novel quantitation algorithms. We implemented these algorithms in the CAFA (capillary automated footprinting analysis) open-source software that is downloadable gratis from https://simtk.org/home/cafa. The accuracy, throughput and reproducibility of CAFA analysis are demonstrated using hydroxyl radical footprinting of RNA. The versatility of CAFA is illustrated by dimethyl sulfate mapping of RNA secondary structure and DNase I mapping of a protein binding to a specific sequence of DNA. Our experimental and computational approach facilitates the acquisition of high-throughput chemical probing data for solution structural analysis of nucleic acids.