Functional interaction of the adenovirus IVa2 protein with adenovirus type 5 packaging sequences

Adenovirus type 5 (Ad5) DNA packaging is initiated in a polar fashion from the left end of the genome. The packaging process is dependent on the cis-acting packaging domain located between nucleotides 230 and 380. Seven AT-rich repeats that direct packaging have been identified within this domain. A1, A2, A5, and A6 are the most important repeats functionally and share a bipartite sequence motif. Several lines of evidence suggest that there is a limiting trans-acting factor(s) that plays a role in packaging. Both cellular and viral proteins that interact with adenovirus packaging elements in vitro have been identified. In this study, we characterized a group of recombinant viruses that carry site-specific point mutations within a minimal packaging domain. The mutants were analyzed for growth properties in vivo and for the ability to bind cellular and viral proteins in vitro. Our results are consistent with a requirement of the viral IVa2 protein for DNA packaging via a direct interaction with packaging sequences. Our results also indicate that higher-order IVa2-containing complexes that form on adjacent packaging repeats in vitro are the complexes required for the packaging activity of these sites in vivo. Chromatin immunoprecipitation was used to study proteins that bind directly to the packaging sequences. These results demonstrate site-specific interaction of the viral IVa2 and L1 52/55K proteins with the Ad5 packaging domain in vivo. These results confirm and extend those previously reported and provide a framework on which to model the adenovirus assembly process.     

cis and trans requirements for the selective packaging of adenovirus type 5 DNA.

Polar packaging of adenovirus DNA into virions is dependent on the presence of cis-acting sequences at the left end of the viral genome. Our previous analyses demonstrated that the adenovirus type 5 (Ad5) packaging domain (nucleotides 194 to 358) is composed of at least five elements that are functionally redundant. A repeated sequence, termed the A repeat, was associated with packaging function. Here we report a more detailed analysis of the requirements for the selective packaging of Ad5 DNA. By introducing site-directed point mutations into specific A repeat sequences, we demonstrate that the A repeats represent cis-acting functional components of the packaging signal. Additional elements, located outside the originally defined packaging domain boundaries and that resemble the A repeat consensus sequence, also are capable of promoting the packaging of viral DNA. The cis-acting components of the packaging signal appear to be subject to certain spatial constraints for function, possibly reflecting a necessity for the coordinate binding of packaging proteins to these sites. In agreement with this idea, we present evidence that the interaction of a limiting trans-acting factor(s) with the packaging domain in vivo is required for efficient encapsidation of the Ad5 genome.     

Bipartite structure and functional independence of adenovirus type 5 packaging elements.

Selectivity and polarity of adenovirus type 5 DNA packaging are believed to be directed by an interaction of putative packaging factors with the cis-acting adenovirus packaging domain located within the genomic left end (nucleotides 194 to 380). In previous studies, this packaging domain was mutationally dissected into at least seven functional elements called A repeats. These elements, albeit redundant in function, exhibit differences in the ability to support viral packaging, with elements I, II, V, and VI as the most critical repeats. Viral packaging was shown to be sensitive to spatial changes between individual A repeats. To study the importance of spatial constraints in more detail, we performed site-directed mutagenesis of the 21-bp linker regions separating A repeats I and II, as well as A repeats V and VI. The results of our mutational analysis reveal previously unrecognized sequences that are critical for DNA encapsidation in vivo. On the basis of these results, we present a more complex consensus motif for the adenovirus packaging elements which is bipartite in structure. DNA encapsidation is compromised by changes in spacing between the two conserved parts of the consensus motif, rather than between different A repeats. Genetic evidence implicating packaging elements as independent units in viral DNA packaging is derived from the selection of revertants from a packaging-deficient adenovirus: multimerization of packaging repeats is sufficient for the evolution of packaging-competent viruses. Finally, we identify minimally sized segments of the adenovirus packaging domain that can confer viability and packaging activity to viruses carrying gross truncations within their left-end sequences. Coinfection experiments using the revertant as well as the minimal-packaging-domain mutant viruses strengthen existing arguments for the involvement of limiting, trans-acting components in viral DNA packaging.     

Adenovirus type 5 packaging domain is composed of a repeated element that is functionally redundant.

Previous analyses have demonstrated that adenovirus DNA is packaged into virions in vivo in a polar, left-to-right fashion. The packaging of viral DNA is dependent on cis-acting elements at the left end of the genome. In this report, we describe a genetic analysis of the sequences that are required for efficient packaging of adenovirus type 5 (Ad5) DNA. Our results demonstrate that the Ad5 packaging domain (nucleotides 194 to 358) is composed of at least five distinct elements that are functionally redundant. An AT-rich repeated sequence motif, the A repeat, is located in four of five of these regions; the fifth region is also AT rich. The efficiency of viral packaging depends on the number of individual A repeats that are present in the viral genome. The deletion of the entire packaging domain resulted in the loss of virus viability. A virus that contains a multimerized oligonucleotide corresponding to A repeat II in place of the packaging domain could package viral DNA, although with reduced efficiency compared with that of the wild-type virus. Our results also suggest that the spacing of specific sequences at the left end of the Ad5 genome are important for enhancer region function in vivo.     

Altering the Ad5 packaging domain affects the maturation of the Ad particles

We have previously described a new family of mutant adenoviruses carrying different combinations of attB/attP sequences from bacteriophage PhiC31 flanking the Ad5 packaging domain. These novel helper viruses have a significantly delayed viral life cycle and a severe packaging impairment, regardless of the presence of PhiC31 recombinase. Their infectious viral titers are significantly lower (100-1000 fold) than those of control adenovirus at 36 hours post-infection, but allow for efficient packaging of helper-dependent adenovirus. In the present work, we have analyzed which steps of the adenovirus life cycle are altered in attB-helper adenoviruses and investigated whether these viruses can provide the necessary viral proteins in trans. The entry of attB-adenoviral genomes into the cell nucleus early at early timepoints post-infection was not impaired and viral protein expression levels were found to be similar to those of control adenovirus. However, electron microscopy and capsid protein composition analyses revealed that attB-adenoviruses remain at an intermediate state of maturation 36 hours post-infection in comparison to control adenovirus which were fully mature and infective at this time point. Therefore, an additional 20-24 hours were found to be required for the appearance of mature attB-adenovirus. Interestingly, attB-adenovirus assembly and infectivity was restored by inserting a second packaging signal close to the right-end ITR, thus discarding the possibility that the attB-adenovirus genome was retained in a nuclear compartment deleterious for virus assembly. The present study may have substantive implications for helper-dependent adenovirus technology since helper attB-adenovirus allows for preferential packaging of helper-dependent adenovirus genomes.     

Control of adeno-associated virus type 2 cap gene expression: relative influence of helper virus, terminal repeats, and Rep proteins.

Adeno-associated virus type 2 (AAV-2) gene expression is tightly controlled by functions of the helper virus as well as by the products of its own viral rep gene. Double-immunofluorescence studies of Rep and VP protein expression in cells coinfected with AAV-2 and adenovirus type 2 showed that a large proportion of these cells expressed Rep78 and Rep52 but no capsid proteins. The percentage of Rep78/Rep52- and capsid protein-positive cells was strongly influenced by the relative ratio of AAV-2 to adenovirus type 2. In contrast, nearly all cells positive for Rep68/Rep40 were also positive for capsid protein expression. Examination of p40 promoter transactivation by individual Rep proteins in the presence of adenovirus, however, showed that both Rep78 and Rep68 efficiently stimulated p40 mRNA accumulation and capsid protein expression. This strong transactivation was reliant upon the presence of terminal repeats and correlated with template amplification. In replication-deficient expression constructs, transactivation was observed only with Rep68 and was dependent on the linear Rep binding site within the left terminal repeat which was detected in the presence of high adenovirus concentrations. In the absence of any terminal repeat sequences, Rep68 expression again led to a minor transactivation of capsid protein expression which was detectable only at low adenovirus concentrations. This low level of transactivation of capsid protein expression by Rep proteins in the absence of terminal repeats resulted in a lower efficiency of capsid assembly. The data show a dominant influence of adenovirus type 2 functions on AAV-2 gene expression, a requirement for terminal repeats for strong transactivation of the p40 promoter by Rep proteins, and differential influences of Rep78 and Rep68 on AAV-2 promoters. Implications for the production of recombinant AAV-2 vectors are discussed.     

Ternary complex formation on the adenovirus packaging sequence by the IVa2 and L4 22-kilodalton proteins

Assembly of infectious adenovirus particles requires seven functionally redundant elements at the left end of the genome, termed A repeats, that direct packaging of the DNA. Previous studies revealed that the viral IVa2 protein alone interacts with specific sequences in the A repeats but that additional IVa2-containing complexes observed during infection require the viral L4 22-kDa protein. In this report, we purified a recombinant form of the 22-kDa protein to characterize its DNA binding properties. In electrophoretic mobility shift assay analyses, the 22-kDa protein alone did not interact with the A repeats but it did form complexes on them in the presence of the IVa2 protein. These complexes were identical to those seen in extracts from infected cells and had the same DNA sequence dependence. Furthermore, we provide data that the 22-kDa protein enhances binding of the IVa2 protein to the A repeats and that multiple binding sites in the packaging sequence augment this activity. These data support a cooperative role of the IVa2 and 22-kDa proteins in packaging and assembly.     

Protein interactions in the murine cytomegalovirus capsid revealed by cryoEM

Cytomegalovirus (CMV) is distinct among members of the Herpesviridae family for having the largest dsDNA genome (230 kb). Packaging of large dsDNA genome is known to give rise to a highly pressurized viral capsid, but molecular interactions conducive to the formation of CMV capsid resistant to pressurization have not been described. Here, we report a cryo electron microscopy (cryoEM) structure of the murine cytomegalovirus (MCMV) capsid at a 9.1 ? resolution and describe the molecular interactions among the ~3000 protein molecules in the CMV capsid at the secondary structure level. Secondary structural elements are resolved to provide landmarks for correlating with results from sequence-based prediction and for structure-based homology modeling. The major capsid protein (MCP) upper domain (MCPud) contains α-helices and β-sheets conserved with those in MCPud of herpes simplex virus type 1 (HSV-1), with the largest differences identified as a “saddle loop” region, located at the tip of MCPud and involved in interaction with the smallest capsid protein (SCP). Interactions among the bacteriophage HK97-like floor domain of MCP, the middle domain of MCP, the hook and clamp domains of the triplex proteins (hoop and clamp domains of TRI-1 and clamp domain of TRI-2) contribute to the formation of a mature capsid. These results offer a framework for understanding how cytomegalovirus uses various secondary structural elements of its capsid proteins to build a robust capsid for packaging its large dsDNA genome inside and for attaching unique functional tegument proteins outside.     

RNA Sequence Features Are at the Core of Influenza A Virus Genome Packaging

The influenza A virus (IAV), a respiratory pathogen for humans, poses serious medical and economic challenges to global healthcare systems. The IAV genome, consisting of eight single-stranded viral RNA segments, is incorporated into virions by a complex process known as genome packaging. Specific RNA sequences within the viral RNA segments serve as signals that are necessary for genome packaging. Although efficient packaging is a prerequisite for viral infectivity, many of the mechanistic details about this process are still missing. In this review, we discuss the recent advances toward the understanding of IAV genome packaging and focus on the RNA features that play a role in this process.     

Rous sarcoma virus direct repeat cis elements exert effects at several points in the virus life cycle.

Two approximately 135-nucleotide (nt) direct repeats flank the Rous sarcoma virus (RSV) oncogene src and are composed of two smaller repeats, dr1 (approximately 100 nt) and dr2 (approximately 36 nt). These sequences have been reported to contain cis-acting signals necessary for RNA packaging and elements that allow cytoplasmic accumulation of unspliced RNA (cytoplasmic transport elements). In this report, we show that avian fibroblasts infected with the Prague A strain of RSV with precise deletions of both dr1 elements express src and are transformed by this mutant virus but production of virus particles is very low and virus spread throughout the culture requires several weeks. We show that the replication defect is due to complex effects on viral RNA transport, viral RNA half-life, and virus particle assembly. The dr1 elements may contain binding sites for a permissive cell-specific factor(s) that facilitates efficient nuclear-cytoplasmic transport, RNA stability, and cytoplasmic utilization of unspliced viral RNA. The implications of these results for understanding the defects of nonpermissive virus infections in mammalian cells are discussed.     

Characterization of Empty adenovirus particles assembled in the absence of a functional adenovirus IVa2 protein

The molecular mechanism for packaging of the adenovirus (Ad) genome into the capsid is likely similar to that of DNA bacteriophages and herpesviruses-the insertion of viral DNA through a portal structure into a preformed prohead driven by an ATP-hydrolyzing molecular machine. It is speculated that the IVa2 protein of adenovirus is the ATPase providing the power stroke of the packaging machinery. Purified IVa2 binds ATP in vitro and, along with a second Ad protein, the L4 22-kilodalton protein (L4-22K), binds specifically to sequences in the Ad genome that are essential for packaging. The efficiency of binding of these proteins in vitro was correlated with the efficiency of packaging in vivo. By utilizing a virus unable to express IVa2, pm8002, it was reported that IVa2 plays a role in assembly of the empty virion. We wanted to address the question of whether the ATP binding, and hence the putative ATPase activity, of IVa2 was required for its role in virus assembly. Our results show that ATPase activity was not required for the assembly of empty virus particles. In addition, we present evidence that particles were assembled in the absence of IVa2 by using two viruses null for IVa2-a deletion mutant virus, ΔIVa2, and the previously described mutant virus, pm8002. Empty virus particles produced by these IVa2 mutant viruses did not contain detectable viral DNA. We conclude that the major role of IVa2 is in viral DNA packaging. A characterization of the empty particles obtained from the IVa2 mutant viruses compared to wild-type empty particles is presented.     

Adenovirus structural protein IIIa is involved in the serotype specificity of viral DNA packaging

The packaging of the adenovirus (Ad) genome into a capsid displays serotype specificity. This specificity has been attributed to viral packaging proteins, the IVa2 protein and the L1-52/55K protein. We previously found that the Ad17 L1-52/55K protein was not able to complement the growth of an Ad5 L1-52/55K mutant virus, whereas two other Ad17 packaging proteins, IVa2 and L4-22K, could complement the growth of Ad5 viruses with mutations in the respective genes. In this report, we investigated why the Ad17 L1-52/55K protein was not able to complement the Ad5 L1-52/55K mutant virus. We demonstrate that the Ad17 L1-52/55K protein binds to the Ad5 IVa2 protein in vitro and the Ad5 packaging domain in vivo, activities previously associated with packaging function. The Ad17 L1-52/55K protein also associates with empty Ad5 capsids. Interestingly, we find that the Ad17 L1-52/55K protein is able to complement the growth of an Ad5 L1-52/55K mutant virus in conjunction with the Ad17 structural protein IIIa. The same result was found with the L1-52/55K and IIIa proteins of several other Ad serotypes, including Ad3 and Ad4. The Ad17 IIIa protein associates with empty Ad5 capsids. Consistent with the complementation results, we find that the IIIa protein interacts with the L1-52/55K protein in vitro and associates with the viral packaging domain in vivo. These results underscore the complex nature of virus assembly and genome encapsidation and provide a new model for how the viral genome may tether to the empty capsid during the encapsidation process.     

JC virus minor capsid proteins Vp2 and Vp3 are essential for virus propagation

Virus-encoded capsid proteins play a major role in the life cycles of all viruses. The JC virus capsid is composed of 72 pentamers of the major capsid protein Vp1, with one of the minor coat proteins Vp2 or Vp3 in the center of each pentamer. Vp3 is identical to two-thirds of Vp2, and these proteins share a DNA binding domain, a nuclear localization signal, and a Vp1-interacting domain. We demonstrate here that both the minor proteins and the myristylation site on Vp2 are essential for the viral life cycle, including the proper packaging of its genome.