Effects of SH1 and SH2 modifications on myosin: similarities and differences.

The properties of myosin modified at the SH2 group (Cys-697) were studied and compared with the previously reported properties of myosin modified at the SH1 group (Cys-707). 4-[N-[(iodoacetoxy)ethyl]-N methylamino]-7-nitrobenz-2-oxa-1, 3-diazole (IANBD) was used for selective modification of the SH2 group on myosin. SH2-labeled heavy meromyosin (SH2-HMM), similar to SH1-labeled HMM (SH1-HMM), did not propel actin filaments in the in vitro motility assays. SH1- and SH2-HMM produced similar amounts of load in the mixtures with unmodified HMM; the sliding speed of actin filaments gradually decreased with an increase in the fraction of either one of the modified HMMs in the mixture. In analogy to SH1-labeled myosin subfragment 1 (SH1-S1), SH2-labeled S1 (SH2-S1) activated regulated actin in the in vitro motility assays. SH2 modification inhibited Mg-ATPase of S1 and its activation by actin. The weak binding of S1 to actin was unaffected whereas the strong binding was weakened by SH2 modification. Overall, our results demonstrate similar behavior of SH1- and SH2-modified myosin heads in the in vitro motility assays despite some differences in their enzymatic properties. The effects of these modifications are ascribed to the location of the SH1-SH2 helix relative to other functional centers of S1.     

A spin label that binds to myosin heads in muscle fibers with its principal axis parallel to the fiber axis.

We have used an indane-dione spin label (2-[-oxyl-2,2,5,5-tetramethyl-3-pyrrolin-3-yl)methenyl]in dane-1,3-dione), designated InVSL, to study the orientation of myosin heads in bundles of chemically skinned rabbit psoas muscle fibers, with electron paramagnetic resonance (EPR) spectroscopy. After reversible preblocking with 5,5'-dithiobis(2-nitro-benzoic acid) (DTNB), we were able to attach most of the spin label covalently and rigidly to either Cys 707 (SH1) or Cys 697 (SH2) on myosin heads. EPR spectra of labeled fibers contained substantial contributions from both oriented and disordered populations of spin labels. Similar spectra were obtained from fibers decorated with InVSL-labeled myosin heads (subfragment 1), indicating that virtually all the spin labels in labeled fibers are on the myosin head. We specifically labeled SH2 with InVSL after reversible preblocking of the SH1 sites with 1-fluoro-2,4-dinitrobenzene (FDNB), resulting in a spectrum that indicated only disordered spin labels. Therefore, the oriented and disordered populations correspond to labels on SH1 and SH2, respectively. The spectrum of SH2-bound labels was subtracted to produce a spectrum corresponding to SH1-bound labels, which was used for further analysis. For this corrected spectrum, the angle between the fiber axis and the principal axis of the spin label was fitted well by a Gaussian distribution centered at theta o = 11 +/- 1 degree, with a full width at half-maximum of delta theta = 15 +/- 2 degrees. The unique orientation of InVSL, with its principal axis almost parallel to the fiber axis, makes it complementary to spin labels previously studied in this system. This label can provide unambiguous information about axial rotations of myosin heads, since any axial rotation of the head must be reflected in the same axial rotation of the principal axis of the probe, thus changing the hyperfine splitting. Therefore, InVSL-labeled fibers have ideal properties needed for further exploration myosin head orientation and rotational motion in muscle.     

THE CHANGE IN STATE OF THE PROTEINS OF MUSCLE IN RIGOR

1. When myosin is exposed to a typical denaturing agent (acid) it becomes insoluble and its SH groups are activated. 2. The same number of active SH groups is found in the soluble myosin of resting muscle as in the insoluble myosin of muscle in rigor. No activation of SH groups accompanies the formation of insoluble protein in rigor. 3. When the insoluble myosin of muscle in rigor is treated with a denaturing agent its SH groups are activated. 4. Protein coagulation as brought about by denaturing agents (heat, acid, alkali, alcohol, urea, salicylate, surface forces, ultraviolet light) is a distinctly different change from the coagulation of myosin brought about by the unknown agent in muscle.     

The interaction and photolabeling of myosin subfragment 1 with 3'(2')-O-(4-benzoyl)benzoyladenosine 5'-triphosphate

The photoprobe 3'(2')-O-(4-benzoyl)benzoyladenosine 5'-triphosphate (Bz2ATP) was used to characterize the nucleotide-binding site of myosin subfragment 1 (SF1). Improved synthesis and purification of Bz2ATP are reported. 1H NMR and ultraviolet spectroscopy show that Bz2ATP is a 60:40 mixture of the 3'(2')-ribose isomers and that the epsilon M261 is 41,000 M-1 cm-1. Bz2ATP is hydrolyzed by SF1 comparably to ATP in the presence of actin or K+, NH4+, or Mg2+ ions; and the product, Bz2ADP, has a single binding site on SF1 (K'a = 3.0 X 10(5) M-1). [3H]Bz2ATP was photoincorporated into SF1 with concomitant loss of K+-EDTA-ATPase activity. Analysis of photolabeled SF1 showed that the three major tryptic peptides (23, 50, and 20 kDa) of the heavy chain fragment and the alkali light chains were labeled. The presence of ATP during irradiation protected only the 50-kDa peptide, indicating that the other peptides were nonspecifically labeled. If Bz2ATP was first trapped on SF1 by cross-linking the reactive thiols, SH1 and SH2, with p-phenylenedimaleimide, only the 50-kDa tryptic peptide was labeled. These results confirm and extend previous observations that [3H]Bz2ATP trapped on SF1 by cobalt(III) phenanthroline photolabeled the same 50-kDa peptide (Mahmood, R., and Yount, R.G. (1984) J. Biol. Chem. 259, 12956-12959). Thus, the 50-kDa peptide is labeled with or without thiol cross-linking, indicating that the relative position of SH1 and SH2 does not affect the labeling pattern.     

2-[(4-Azido-2-nitrophenyl)amino]ethyl triphosphate, a novel chromophoric and photoaffinity analogue of ATP. Synthesis, characterization, and interaction with myosin subfragment 1

A facile and high-yield synthesis of a new ATP analogue, 2-[(4-azido-2-nitrophenyl)amino]ethyl triphosphate (NANTP), is described. NANTP and ATP are hydrolyzed by skeletal myosin subfragment 1 (SF1) at comparable rates in the presence of Ca2+, Mg2+, or NH4+-EDTA. NANTP is also cleaved but less readily by mitochondrial F1-ATPase and by (Na+ + K+)-ATPase from dog brain and hog kidney. F-Actin markedly activates NANTP cleavage by SF1 in the presence of Mg2+, suggesting that the diphosphate product NANDP is slow to be released from the enzyme. [alpha-32P]NANDP binds to a single site on SF1 (KA = 1 X 10(6) M-1) with an affinity identical with that of ADP. The absorption maximum of NANDP was shifted from 474 to 467 nm upon binding to SF1, suggesting that the purine binding site has a dielectric constant of about 45. NANDP was trapped in nearly stoichiometric amounts at the active site by cross-linking SH1 and SH2 with N,N'-p-phenylenedimaleimide (pPDM) or by chelation with cobalt (III) phenanthroline [Wells, J., & Yount, R. (1979) Proc. Natl. Acad. Sci. U.S.A. 76, 4966]. The trapped [beta-32P]NANDP X SF1 complex, like the comparable ADP X SF1 complex, was stable for days at 0 degree C and could be purified free of extraneous analogue by ammonium sulfate precipitation and gel filtration. Photolysis of the purified complex gave greater than 50% covalent incorporation of the trapped NANDP into the 95-kilodalton (kDa) heavy chain of SF1. Limited trypsinization and analysis by gel electrophoresis showed that greater than 95% of the bound label was associated with the 25-kDa NH2-terminal peptide. Without trapping, NANDP labeling of SF1 was nonspecific and was not prevented by addition of a large excess of ATP. This new approach of trapping photoaffinity analogues by cross-linking agents before photolysis may prove to be of general usefulness in increasing the specificity and extent of labeling of enzymes that undergo substrate-induced conformation changes.     

Conformational stability of the myosin rod

Chymotryptic cleavage patterns of myosin rods from pig stomach, chicken gizzard, and rabbit skeletal muscle indicate that short (approximately 45 nm) heavy meromyosin subfragment 2 (SF2) is a consistent product of all three rods, whereas long (approximately 60 nm) SF2 is derived only from skeletal muscle myosin. Differential scanning calorimetry was used to follow the thermally induced melting transition of the rods and certain of their subfragments. In 0.12 M KCl, sodium phosphate buffer, pH 6.2-7.6, the light meromyosin (LMM) and SF2 domains of each rod had essentially identical conformational stabilities. Temperature midpoints for the melting transitions were 54-56 degrees C for the two smooth muscle myosin rods and 50-53 degrees C for the skeletal muscle myosin rod. In 0.6 M K Cl buffer, melting transitions for the smooth muscle myosin rods were essentially unchanged, but skeletal muscle myosin rods showed multiphase melting, with major transitions at 43 degrees C and 52 degrees C. The first of these was tentatively attributed to LMM, and the second to SF2. In 0.12 M K Cl buffer, the LMM transition was stabilised so that it superimposed on that of SF2. No melting was observed in any of the rods at physiological temperature. These results indicate that, excluding a possible but only narrow hinge region, the entire myosin rod has essentially uniform conformational stability at physiological pH and ionic strength, and thus that the contractile and elastic properties of the cross-bridge exist in the heavy meromyosin subfragment 1 (SF1) domains of the molecule.     

Study of the modification of histidine residues, SH- and epsilon-NH2-groups of rat sarcoma-45 myosin by specific reagents

Modification of histidine residues, SH- and epsilon-NH2-groups of myosin from rat sarcoma-45 by specific reagents was studied. It was shown that diethylpyrocarbonate modifies histidine residues essential for the ATPase activity. A kinetic analysis of myosin epsilon-NH2-groups modification by 2,4,6-trinitrobenzene sulfonate revealed that myosin trinitrophenylation and its inactivation by Ca2(+)-ATPase occurs in two steps: a fast and a slow (Km = 2400 and 1.7 s-1 M-1, respectively). Two essential epsilon-NH2-groups of tumour myosin active sites react in the fast reaction. The relatively low concentrations of p-chloromercuribenzoic acid activate rat sarcoma-45 myosin Ca2(+)-ATPase and Mg2(+)-ATPase, whereas higher ones inhibit the enzyme. The data obtained suggest that two SH-groups, SH1 and SH2 are essential for the tumour myosin ATPase function.     

Electron microscopic visualization of the SH1 thiol of myosin by the use of an avidin-biotin system

One of the reactive thiols in the myosin head, SH1, was covalently labeled with a biotin derivative, N-iodoacetyl-N'-biotinylhexylenediamine. When 50% of the SH1 thiol was modified with the biotin reagent as judged from measurements of ATPase activities, the biotinylated myosin bound one mole of avidin per mole of myosin at the saturating level. The avidin-myosin complex was readily formed in the presence of MgADP or MgATP. Peptide maps of the biotinylated myosin revealed that SH1 is actually the site of biotinylation with N-iodoacetyl-N'-biotinylhexylenediamine. Electron microscopic examination of the avidin-myosin complex showed that the attachment site of avidin on the myosin head is 130 A from the head-rod junction, indicating that the SH1 thiol is located there.     

The disappearance of the dependence of actin-myosin interaction on the phosphorylation of myosin light chains in the "freezing" of the structure of heavy meromyosin by a bifunctional reagent

Using glycerinated muscle fibers, free of myosin, tropomyosin and troponin, a study was made of the structural state of F-actin modified by N-(iodoacetyl)-N'-(1-naphthyl-5-sulfo)-ethylendiamine (1.5-IAEDANS) and by rhodaminyl--phalloin at decoration of thin filaments with a proteolytic fragment of myosin--heavy meromyosin containing phosphorylated and dephosphorylated myosin light chains. The heavy meromyosin used has three SH-groups of heavy chain SH1, SH2 and SH chi modified by bifunctional reagent N,N'-n-phenylmaleimide (SH1-SH2, SH2-SH chi). At decoration of thin filaments with heavy meromyosin, some changes in polarized fluorescence of rhodaminyl--phalloin and 1.5-IAEDANS independent of phosphorylation of myosin light chains were found. Fluorescence anisotropy of the fiber was found to depend primarily on the character of heavy chain of SH-group modification. The ability of heavy chains to change their conformations is supposed to play an important role in the mechanism of myosin system modulation of muscle contraction.     

Incorporation of an azobenzene derivative into the energy transducing site of skeletal muscle myosin results in photo-induced conformational changes

The region containing reactive cysteines, Cys 707 (SH1)-Cys 697 (SH2), of skeletal muscle myosin is thought to play a key role in the conformational changes of the myosin head during force generation coupled to ATP hydrolysis. In the present study, we synthesized a photochromic crosslinker, 4,4'-azobenzene-dimaleimide (ABDM), that undergoes reversible cis-trans isomerization upon ultra violet (UV) and visible (VIS) light irradiation resulting in a change in the crosslinking length from 5 to 17 A. The reactive cysteines, SH1 and SH2, of myosin subfragment 1 (S1) were crosslinked with ABDM, yielding an ABDM-S1 complex. The changes in absorbance induced by UV/VIS light irradiation of the complex were similar to those of free ABDM indicating that the incorporation of ABDM at the SH1 and SH2 sites did not disrupt the isomerization of crosslinked ABDM. Small-angle synchrotron X-ray scattering analysis of the ABDM-S1 complex in solution suggested that the localized conformational changes resulting from the cis to trans isomerization on ABDM crosslinking of SH1 and SH2 induced a small but significant swing in the lever arm portion of S1 in the opposite direction from that induced by ATP.     

Functional integrity of the SH1 site in myosin from hypertrophied myocardium.

The hypothesis that an alteration in the SH1 site of hypertrophy myosin is reponsible for the reduced Ca2+-stimulated ATPase activity is examined.The functional integrity of the SH1 site was evaluated by measurement of the (K+)-EDTA-stimulated and Mg2+-inhibited ATPase activities. Neither activity differed from control although the Ca2+-stimulated ATPase of the same preparations was significantly reduced. The reduction in Ca2+-activated ATPase was independent of ionic strength. Titration with N-ethylmaleimide elevated the Ca2+-stimulated ATPase of hypertrophy myosin to the same peak activity as control. Actin-stimulated ATPase activity of hypertrophy myosin was also reduced. The results indicate that the SH1 of hypertrophy myosin is functionally intact for (K+)EDTA-stimulated ATPase and Mg2+ inhibition, but functionally deficient with regard to Ca2+-stimulated and actin-activated ATPase activities. This implies a partition of the functional aspects of SH1.     

Cooperativity of thiol-modified myosin filaments. ATPase and motility assays of myosin function.

The effects of chemical modifications of myosin's reactive cysteines on actomyosin adenosine triphosphatase (ATPase) activities and sliding velocities in the in vitro motility assays were examined in this work. The three types of modifications studied were 4-[N-[(iodoacetoxy)ethyl]-N-methylamino]-7-nitrobenz-2-oxa-1,3- diazole labeling of SH2 (based on Ajtai and Burghart. 1989. Biochemistry. 28:2204-2210.), phenylmaleimide labeling of SH1, and phenylmaleimide labeling of myosin in myofibrils under rigor conditions. Each type of modified myosin inhibited the sliding of actin in motility assays. The sliding velocities of actin over copolymers of modified and unmodified myosins in the motility assay were slowest with rigor-modified myosin and most rapid with SH2-labeled myosin. The actin-activated ATPase activities of similarly copolymerized myosins were lowest with SH2-labeled myosin and highest with rigor-modified myosin. The actin-activated ATPase activities of myosin subfragment-1 obtained from these modified myosins decreased in the same linear manner with the fraction of modified heads. These results are interpreted using a model in which the sliding of actin filaments over myosin filaments decreases the probability of myosin activation by actin. The sliding velocity of actin over monomeric rigor-modified myosin exceeded that over the filamentous form, which suggests for this myosin that filament structure is important for the inhibition of actin sliding in motility assays. The fact that all cysteine modifications examined inhibited the actomyosin ATPase activities and sliding velocities of actin over myosin poses questions concerning the information about the activated crossbridge obtained from probes attached to SH1 or SH2 on myosin.     

Characterization of the properties of ethenoadenosine nucleotides bound or trapped at the active site of myosin subfragment 1

The fluorescent nucleotide analogue of ADP, 1,N6-ethenoadenosine diphosphate (epsilon ADP), has been used to probe the active site of myosin subfragment 1 (SF1). The Mg complex of ADP was shown to be trapped stoichiometrically at the active site by a variety of thiol cross-linking agents having sulfur to sulfur spanning lengths of 2-14 A. Previous studies [Wells, J. A., & Yount, R. G. (1979) Proc. Natl. Acad. Sci. U.S.A. 76, 4966-4970] had suggested ADP was trapped by direct closure of a postulated active site cleft by cross-linking two activity critical thiols, SH1 and SH2. This model was tested by measuring the polarization of trapped and reversibly bound epsilon ADP, the off-rate of trapped epsilon ADP, and the solute quencher accessibility of trapped epsilon ADP on SF1 modified with thiol cross-linking agents of different spanning lengths. The lack of correlation of all of these properties with the length of the cross-linking span suggests that trapping occurs by indirect stabilization of a conformation favoring bound nucleotides rather than by sterically preventing the release of nucleotide. Measurement of the fluorescent properties of epsilon ADP bound to SF1 vs. epsilon ADP free gave a 20% increase in emission intensity, a 7-nm blue shift in the emission maximum, and a 70% increase in the absorbance at the excitation wavelength (330 nm). Trapping of epsilon ADP by the thiol cross-linking agent p-phenylenedimaleimide gave a further 24% increase in emission intensity. This change was shown to be the result of an increase in absorbance of trapped epsilon ADP at 330 nm rather than an increase in the quantum yield.(ABSTRACT TRUNCATED AT 250 WORDS)     

Selective modification of myosin SH1 with 1,2,4-trinitrobenzene. VIII. Thiols of myosin

Myosin has 2 mol of the most reactive thiol, named SH1. 1,2,4-Trinitrobenzene (TNB), a novel dinitrophenyl(DNP)ating reagent [Takahashi et al. (1983) Chem. Lett. 1445-1448], was found to react only with SH1 without any other amino acid residues in myosin under the conditions used. Its reaction with myosin SH1 was about 30 times faster than that with N-acetylcysteine (NAC). The reaction rate of TNB with SH1 was about twice compared with that of NEM, the most reactive selective reagent for SH1 so far found, although its rate with NAC was only one sixtieth that of NEM. As to the lambda max of the absorption spectrum of SH1-DNP-myosin, a large red shift of as much as 20 nm was observed compared with low molecular S-DNP derivatives. This red shift disappeared in 8 M urea. This outstanding feature of SH1 modification with TNB was discussed in terms of affinity labeling by interaction with an aromatic amino acid near SH1.     

The excimer fluorescence of N-(1-pyrenyl)iodoacetamide labeled to myosin and its subfragment 1

Myosin and its subfragment 1 were labeled with the fluorescent probe N-(1-pyrenyl)iodoacetamide. Both of the labeled complexes exhibited the excimer band at 480 nm (pH 8.0, 25 degrees C). SH1 and SH2 are labeled with this probe as judged by Ca2+-ATPase of the labeled complex. Excimers arise both from the interaction of PIAAs in the two different heads within a single myosin molecule and also from the interaction of PIAAs in the same head. ATP affects these excimers depending on the concentration of Ca2+.     

Effect of tryptic cleavage on the stability of myosin subfragment 1. Isolation and properties of the severed heavy-chain subunit

The procedure of thermal ion-exchange chromatography has been used to examine the effect of prior tryptic cleavage on the stability of myosin subfragment 1 (SF1). Although it is found that digestion does destabilize the subunit interactions at physiological temperatures, the heavy-chain subunit can be isolated either as an equimolar complex comprised of 50K, 27K, and 21K fragments or as one comprised of 50K, 27K, and 18K peptides. Thus, the interactions within the heavy chain are considerably more stable than those between the two subunits. Both forms of the free severed heavy chain exhibit ATPase properties similar to those of the parent tryptic SF1. The Vmax for the actin-activated MgATPase of the free severed heavy chain is the same as that for both undigested and tryptic SF1 (A2). Since its Km for actin is similar to that of tryptic SF1(A2), it may be concluded that changes in the affinity of SF1 for actin induced by trypsin [Botts, J., Muhlrad, A., Takashi, R., & Morales, M. F. (1982) Biochemistry 21, 6903-6905] are not dependent on the presence of the associated alkali light chain. Furthermore, the communication between the SH1 site and the ATPase site is also shown to be independent of the associated alkali light chain, and it persists despite the cleavages present in the free heavy chain. Studies on the ability of these severed heavy chains to reassociate with free A1 and A2 chains indicate that the binding site is retained in the 21K-severed heavy chain but is lost in the 18K form.     

Analysis of the conformational change of myosin during ATP hydrolysis using fluorescence resonance energy transfer

In order to elucidate the molecular basis of energy transduction by myosin as a molecular motor, a fluorescent ribose-modified ATP analog 2'(3')-O-[6-(N-(7-nitrobenz-2-oxa-1,3-diazol-4-yl)amino)hexanoyl]-ATP (NBD-ATP), was utilized to study the conformational change of the myosin motor domain during ATP hydrolysis using the fluorescence resonance energy transfer (FRET) method. The FRET efficiency from the fluorescent probe, BD- or AD-labeled at the reactive cysteine residues, SH1 (Cys 707) or SH2 (Cys697), respectively, to the NBD fluorophore in the ATP binding site was measured for several transient intermediates in the ATPase cycle. The FRET efficiency was greater than that using NBD-ADP. The FRETs for the myosin.ADP.AlF4- and myosin.ADP.BeFn ternary complexes, which mimic the M*.ADP.P(i) state and M.ATP state in the ATPase cycle, respectively, were similar to that of NBD-ATP. This suggests that both the SH1 and SH2 regions change their localized conformations to move closer to the ATPase site in the M*.ATP state and M**.ADP.P(i) state than in the M*.ADP state. Furthermore, we measured energy transfer from BD in the essential light chain to NBD in the active site. Assuming the efficiency at different states, myosin adopts a conformation such that the light chain moves closer to the active site by approximately 9 A during the hydrolysis of ATP.     

Catalytic cooperativity induced by SH1 labeling of myosin filaments

Modifications of SH1 groups on isolated myosin subfragment 1 (S-1) and myosin in muscle fibers affect differently the acto-S-1 ATPase and the fiber properties. Consistent with the findings of earlier work on fibers, the modification of SH1 groups in relaxed myofibrils with phenylmaleimide caused a loss of their shortening. This loss paralleled the decrease in the Vmax of extracted myosin but was not linear with the extent of SH1 labeling. Strikingly, the decrease in Vmax of S-1 prepared from the modified myofibrils was directly proportional to the extent of SH1 labeling. The specificity of SH1 labeling in myofibrils was verified by ATPase activities, thiol titrations, radiolabeling experiments, and comparisons to myosin labeled on SH1 in solution. To test for intermolecular interactions in the myosin filaments and their contribution to the differences between S-1 and myosin, the catalytic properties of copolymers of myosin were examined. Copolymers of myosin and rod minifilaments were formed in 5 mM citrate-Tris (pH 8.0) buffer, and their homogeneity was verified by sedimentation velocity analysis. The inhibition of actomyosin ATPase by rod particles was related to the decrease in the Km value. When rod particles were replaced in these minifilaments by SH1-modified myosin, the ATPase of the copolymers was increased over that of the combined ATPases of the individual filaments. The actomyosin ATP turnover rates on the unmodified heads were increased severalfold by the modified heads.(ABSTRACT TRUNCATED AT 250 WORDS)     

ATP-induced opposite changes in the local environments around Cys(697) (SH2) and Cys(707) (SH1) of the myosin motor domain revealed by the prodan fluorescence.

To obtain a consistent view of the nucleotide-induced conformational changes around Cys(697) (SH2) and Cys(707) (SH1) in skeletal myosin subfragment-1 (S-1), the two thiols were labeled with the same environmentally sensitive fluorophore, 6-acyl-2-dimethylaminonaphthalene group, using 6-acryloyl-2-dimethylaminonaphthalene (acrylodan, AD) and 6-bromoacetyl-2-dimethylaminonaphthalene (BD), respectively. The resultant fluorescent derivatives, AD-S-1 and BD-S-1, have the same fluorophore at either SH2 or SH1, which was verified by inspections of changes in the ATPases and the localization of fluorescence after tryptic digestion and CNBr cleavage for the two derivatives. Especially, AD was found to be a very useful fluorescent reagent that readily reacts with only SH2 of S-1. Measurements of the nucleotide-induced changes in fluorescence emission spectra of AD-S-1 and BD-S-1 suggested that during ATP hydrolysis the environment around the fluorophore at SH2 is very distinct from that around the fluorophore at SH1, being defined as that the former has the hydrophobic and closed characteristics, whereas the latter has the hydrophilic and open ones. The KI quenching study of the fluorescence of the two S-1 derivatives confirmed these results. The most straightforward interpretation for the present results is that during ATP hydrolysis, the helix containing SH2 is buried in hydrophobic side chains and rather reinforced, whereas the adjacent helix containing SH1 moves away from its stabilizing tertiary structural environment.     

Actin and temperature effects on the cross-linking of the SH1-SH2 helix in myosin subfragment 1

Past biochemical work on myosin subfragment 1 (S1) has shown that the bent alpha-helix containing the reactive thiols SH1 (Cys(707)) and SH2 (Cys(697)) changes upon nucleotide and actin binding. In this study, we investigated the conformational dynamics of the SH1-SH2 helix in two actin-bound states of myosin and examined the effect of temperature on this helix, using five cross-linking reagents that are 5-15 A in length. Actin inhibited the cross-linking of SH1 to SH2 on both S1 and S1.MgADP for all of the reagents. Because the rate of SH2 modification was not altered by actin, the inhibition of cross-linking must result from a strong stabilization of the SH1-SH2 helix in the actin-bound states of S1. The dynamics of the helix is also influenced by temperature. At 25 degrees C, the rate constants for cross-linking in S1 alone are low, with values of approximately 0.010 min(-1) for all of the reagents. At 4 degrees C, the rate constants, except for the shortest reagent, range between 0.030 and 0.070 min(-1). The rate constants for SH2 modification in SH1-modified S1 show the opposite trend; they increase with the increases in temperature. The greater cross-linking at the lower temperature indicates destabilization of the SH1-SH2 helix at 4 degrees C. These results are discussed in terms of conformational dynamics of the SH1-SH2 helix.