Identification of RAPD markers linked to the gene PM 1 for resistance to powdery mildew in wheat

 Powdery mildew caused by Blumeria graminis DC. f. sp. triticiém. Marchal is an important disease of wheat (Triticum aestivum L. em Thell). We report here the identification of three random amplified polymorphic DNA (RAPD) markers closely linked to a gene for resistance to B. graminis in wheat. RAPD-PCR (polymerase chain reaction) analysis was conducted using bulked segregant analysis of closely related lines developed from a segregating F₅ family. The F₅ family was derived from a cross between the susceptible cultivar Clark and the resistant line Zhengzhou 871124. Genetic analysis indicated that resistance of Zhengzhou 871124 to powdery mildew is conferred by the gene Pm1. After performing RAPD-PCR analysis with 1300 arbitrary 10-mer primers and agarose-gel electrophoresis, two RAPD markers, UBC320₄₂₀ and UBC638₅₅₀, were identified to be co-segregating with the disease resistance. No recombinants were observed between either of the RAPD markers and the gene for resistance to powdery mildew after analysis of 244 F₂ plants. The third RAPD marker, OPF12₆₅₀, was identified with denaturing gradient-gel electrophoresis (DGGE), and was determined to be 5.4±1.9 cM from the resistance gene. UBC320₄₂₀ and UBC638₅₅₀ were present in wheat powdery mildew differential lines carrying the gene Pm1, suggesting linkage between these markers and the Pm1 resistance gene. Co-segregation between Pm1 and the two markers UBC320₄₂₀ and UBC638₅₅₀ was confirmed in a segregating population derived from a cross with CI14114, the wheat differential line carrying Pm1. The method of deriving closely related lines from inbred families that are segregating for a trait of interest should find wide application in the identification of DNA markers linked to important plant genes. The RAPD marker UBC638₅₅₀ was converted to a sequence tagged site (STS). RAPD markers tightly linked to target genes may facilitate selection and enable gene pyramiding for powdery mildew resistance in wheat breeding programs. Received: 10 December 1995 / Accepted: 13 September 1996     

Physical mapping of the <Emphasis Type="Italic">Rf</Emphasis><Subscript><Emphasis Type="Italic">1</Emphasis></Subscript> fertility-restoring gene to a 100 kb region in cotton

Cytoplasmic male sterility (CMS) plays an important role in crop heterosis exploitation. Determining one or more nuclear genes that can restore male fertility to CMS is essential for developing hybrid cultivars. Genetic and physical mapping is the standard technique required for isolating these restoration genes. By screening 2,250 simple sequence repeat (SSR) primer pairs in cotton (Gossypium hirsutum L.), we identified five new SSR markers that are closely linked to the Rf ₁ gene, a fertility restorer gene of cotton for CMS-D2. Based on our previous fine mapping of the Rf ₁ gene and assemblage of three published STS markers, we constructed a high-resolution genetic map of Rf ₁ containing 13 markers in a genetic distance of 0.9 cM. The 13 molecular markers were used to screen a bacterial artificial chromosome (BAC) library from a restorer line 0-613-2R containing Rf ₁ gene, which yielded 50 single positive clones. There was an average of 3.8 clones ranging from 1 to 12 BAC clones per PCR marker. These 50 clones produced an average insert size of 120 kb (ranging between 80 and 225 kb). Thirty-five primer pairs were designed based on 38 sequences of BAC ends, and two new STS markers tightly linked to Rf ₁ gene have been tagged and integrated into this map. The physical map for the Rf ₁ gene was constructed by fingerprinting the positive clones digested with the HindIII enzyme. We were able to delimit the possible location of the Rf ₁ gene to a minimum of two BAC clones spanning an interval of approximately 100 kb between two clones designated 081-05K and 052-01N. Further work using these two BAC clones will lead to isolation of the Rf ₁ gene in cotton.     

Molecular mapping of stem and leaf rust resistance in wheat

Stem rust caused by Puccinia graminis f. sp. tritici Eriks and Henn and leaf rust caused by Puccinia triticina Rob. ex Desm. are major constraints to wheat production worldwide. In the present study, F₄-derived SSD population, developed from a cross between Australian cultivars ‘Schomburgk’ and ‘Yarralinka’, was used to identify molecular markers linked to rust resistance genes Lr3a and Sr22. A total of 1,330 RAPD and 100 ISSR primers and 33 SSR primer pairs selected ob the basis of chromosomal locations of these genes were used. The ISSR marker UBC 840₅₄₀ was found to be linked with Lr3a in repulsion at a distance of 6.0 cM. Markers cfa2019 and cfa2123 flanked Sr22 at a distance of 5.9 cM (distal) and 6.0 cM (proximal), respectively. The use of these markers in combination would predict the presence or absence of Sr22 in breeding populations. A previously identified PCR-based diagnostic marker STS638 linked to Lr20 was validated in this population. This marker showed a recombination value of 7.1 cM with Lr20.     

Linkage analysis of a fertility restoring mutant generated from CMS rice

 DNA polymorphism between a cytoplasmic male-sterile rice line II-32A, the male-fertile maintainer counterpart II-32B, a fertile revertant (T24), as well as two commercial indica restorers, was analyzed with randomly amplified polymorphic DNA (RAPD). A very low degree of polymorphism was found between the revertant T24 and II-32A compared with that of indica rice varieties. This result, together with agronomic and genetic evidence, suggests the revertant to be a product of a nuclear mutation. An analysis of polymorphism between II-32A and the revertant T24 with 510 RAPD decamer primers identified the co-segregating markers OPB07₆₄₀ and OPB18₁₀₀₀ to be linked to a sterile allele of the restoring locus in the revertant T24, at a distance of 5.3 cM. RAPD analysis of a mapping population of Tesanai2/CB with primer OPB07 revealed linkage of OPB07₆₄₀ with RG374 (10.8 cM) and RG394 (8.8 cM) on chromosome 1. Thus the restorer gene, designated Rf ₅, was tentatively localized between RG374 and RG394 on chromosome 1 and appears to be independent of other mapped restorer genes in rice. Received: 11 November 1997 / Accepted: 17 December 1997     

Characterization and fine mapping of <Emphasis Type="Italic">RppQ</Emphasis>, a resistance gene to southern corn rust in maize

Southern corn rust (SCR) is a fungal disease caused by Puccinia polysora Underw, which can infect maize and may result in substantial yield losses in maize production. The maize inbred line Qi319 carries the SCR resistance gene RppQ. In order to identify molecular markers linked to the RppQ gene, several techniques were utilized including random amplified polymorphic DNA (RAPD), simple sequence repeat (SSR), and amplified fragment length polymorphism (AFLP). In addition, sequence characterized amplified region (SCAR) techniques combined with bulked segregant analysis (BSA) were used. Seven RAPD markers, eight SSR markers, and sixty-three AFLP primer combinations amplified polymorphisms between two parents and two bulk populations. A large F₂ population was used for genetic analysis and for fine mapping of the RppQ gene region. One AFLP polymorphic band, M-CAA/E-AGC₃₂₄, was converted to a SCAR marker, MA7, which was mapped to a position 0.46 cM from RppQ. Finally, the RppQ gene was mapped between the SCAR marker MA7 and the AFLP marker M-CCG/E-AGA₁₅₇ with distances of 0.46 and 1.71 cM, respectively.     

Molecular mapping of the Rf 3 fertility restoration gene to facilitate its utilization in breeding confection sunflower

The inheritance of a previously identified dominant Rf gene in the confection sunflower line RHA 280 has been determined and designated as Rf ₃ . This study reports the mapping of the Rf ₃ locus using an F2 population of 227 individuals derived from CMS HA 89-3149 × RHA 280. Bulked segregant analysis with 624 pairs of simple sequence repeat (SSR) primers and sequence tagged site (STS) primers identified two polymorphic SSR markers each of linkage groups (LGs) 7 and 11 from a previous map. Results on 90 F2 individuals with 42 polymorphic markers of LGs 7 and 11 indicated that the Rf ₃ gene was linked with eight markers on LG 7, including five SSR markers (ORS328, ORS331, ORS928, ORS966, and ORS1092) and three expressed sequence tag (EST)-SSR markers (HT619-1, HT619-2, and HT1013). Further analysis of the total F2 population of 227 individuals identified a co-dominant marker, ORS328, linked to Rf ₃ at a genetic distance of 0.7 cM on one side, and a female-dominant marker HT1013 at 12.6 cM proximal to Rf ₃ on the other side; a genetic distance of 47.1 cM for LG 7 was covered. This is the first report of an Rf gene from the confection sunflower. The closely linked marker to Rf ₃ will facilitate marker-assisted selection, and provide a basis for cloning of this gene.     

Locating the petunia Rf gene on a 650-kb DNA fragment

 A bulked segregant analysis was conducted in order to find RAPD and AFLP markers linked to the restorer of fertility (Rf ) gene in petunia. One RAPD marker, OP704, and one AFLP marker, ECCA/ MACT, were found to be closely linked to Rf (<1 cM) in our mapping population produced from an intraspecific Petunia hybrida cross. These two single-copy markers bracketing Rf were then mapped as RFLPs on the tomato map. Despite some rearrangement between the petunia and the tomato genomes, this synteny survey revealed two tomato markers, TG250 and CT24, closely linked to Rf. Physical mapping indicates that CT24, OP704 and ECCA/MACT lie on the same 650-kb MluI fragment. A physical to genetic distance ratio of 400 kb/cM around the Rf gene should make it feasible to identify markers physically very close to Rf. Received: 20 August 1997 / Accepted: 21 October 1997     

Marker-assisted selection for two rust resistance genes in sunflower

In this study we report on the identification of molecular markers, OX20₆₀₀ and OO04₉₅₀, linked to the geneR _Adv in the proprietary inbred line P2. This gene confers resistance to most of the pathotypes of Puccinia helianthi identified in Australia. Analysis indicates these RAPD markers are linked to the resistance locus at 0.0 cM and 11 cM respectively. SCAR markers SCX20₆₀₀ and SCO04₉₅₀ derived from these two RAPD markers, and SCT06₉₅₀ derived from a previously reported RAPD marker linked at 4.5 cM from the R ₁ rust resistance gene were developed. SCX20₆₀₀ and SCO04₉₅₀ were linked at similar distances from their resistance locus as the RAPD markers. SCTO6₉₅₀ co-segregated completely with rust resistance. The robustness of the R ₁ SCAR marker was demonstrated through the amplification of the marker in a diverse range of sunflower germplasm considered to possess the R ₁ gene. The SCAR markers forR _Adv were not amplified in the sunflower rust differential set thereby supporting the contention that this is a novel resistance gene. They did amplify in a number of proprietary lines closely related to the line P2. This locus is under further investigation as it will be useful in our attempts to use molecular-assisted breeding to produce durable resistance in sunflower to P. helianthi.     

Genetic linkage maps of white birches (<Emphasis Type="Italic">Betula platyphylla</Emphasis> Suk. and <Emphasis Type="Italic">B. pendula</Emphasis> Roth) based on RAPD and AFLP markers

A pseudo-testcross mapping strategy was used in combination with the random amplified polymorphism DNA (RAPD) and amplified fragment length polymorphism (AFLP) genotyping methods to develop two moderately dense genetic linkage maps for Betula platyphylla Suk. (Asian white birch) and B. pendula Roth (European white birch). Eighty F₁ progenies were screened with 291 RAPD markers and 451 AFLP markers. We selected 230 RAPD and 362 AFLP markers with 1:1 segregation and used them for constructing the parent-specific linkage maps. The resultant map for B. platyphylla was composed of 226 markers in 24 linkage groups (LGs), and spanned 2864.5 cM with an average of 14.3 cM between adjacent markers. The linkage map for B. pendula was composed of 226 markers in 23 LGs, covering 2489.7 cM. The average map distance between adjacent markers was 13.1 cM. Clustering of AFLP markers was observed on several LGs. The availability of these white birch linkage maps will contribute to the molecular genetics and the implementation of marker-assisted selection in these important forest species.     

Identification of AFLP markers linked to the male fertility restorer gene of CMS (Moricandia arvensis) Brassica juncea and conversion to SCAR marker

We have developed a cytoplasmic male sterile (CMS) line of Brassica juncea through somatic hybridization with Moricandia arvensis and introgressed the fertility restorer gene into B. juncea. This fertility restorer locus is unique in that it is capable of restoring male fertility to two other alloplasmic CMS systems of B. juncea. As a first step toward cloning of this restorer gene we attempted molecular tagging of the Rf locus using the amplified fragment length polymorphism (AFLP) technique. A BC₁F₁ population segregating for male sterility/fertility was used for tagging using the bulk segregant analysis method. Out of 64 primer combinations tested in the bulks, 5 combinations gave polymorphic amplification patterns. Further testing of these primers in individual plants showed four amplicons associated with the male fertility trait. Polymorphic amplicons were cloned and used for designing SCAR primers. One of the SCAR primers generated amplicons mostly in the fertile plants. Linkage analysis using MAPMAKER showed two AFLP and one SCAR markers linked to the male fertility gene with a map distance ranging from 0.6 to 2.9 cM. All the markers are located on one side of the Rf locus.     

PCR-based markers for the powdery mildew resistance gene<Emphasis Type="Italic"> Pm4a</Emphasis> in wheat

Gene tagging is the basis of marker-assisted selection and map-based cloning. To develop PCR-based markers for Pm4a, a dominant powdery mildew resistance gene of wheat, we surveyed 46 group 2 microsatellite markers between Pm4a near-isogenic line (NIL) CI 14124 and the recurrent parent Chancellor (Cc). One of the markers, gwm356, detected polymorphism and was used for genotyping an F₂ population of 85 plants derived from CI 14124 × Cc. Linkage mapping indicated that Xgwm356 was linked to Pm4a at a distance of 4.8 cM. To identify more PCR-based markers for Pm4a, we also converted the restriction fragment length polymorphism marker BCD1231 linked to it into a sequence-tagged site (STS) marker. The STS primer designed based on the end sequences of BCD1231 amplified an approximately 1.6-kb monomorphic band in both parents. Following digestion of the products with the four-cutter enzymes HaeIII and MspI, it was discovered that the band from CI 14124 consisted of at least two products, one of which had a digestion pattern different from the band from Cc. In the F₂ population, the cleaved polymorphism revealed by the STS marker between the parents co-segregated with powdery mildew resistance. To design Pm4a-specific PCR markers, the 1.6-kb band from Cc and the fragment associated with Pm4a in CI 14124 were sequenced and compared. Based on these sequences a new PCR marker was identified, which detected a 470-bp product only in the Pm4a-containing lines. These PCR-based markers provide a cost-saving option for marker-assisted selection of Pm4a.Communicated by F. Salamini     

Inheritance of seed colour and identification of RAPD and AFLP markers linked to the seed colour gene in rapeseed (Brassica napus L.)

In China Polima cytoplasmic male sterility (cms) is currently the most important hybrid system used for the breeding of hybrids. In an effort to develop yellow-seeded Polima cms restorer lines, we used yellow-seeded, doubled haploid (DH) line No.2127-17 as the gene source in crosses with two elite black-seeded Polima cms R lines, Hui5148-2 and 99Yu42, which originated from our breeding programme. The inheritance of seed colour was investigated in the F₂, BC₁ and F₁-derived DH progenies of the two crosses. Seed colour was found to be under the control of the maternal genotype and the yellow seed trait to be partially dominant over the black seed trait. Segregation analysis revealed a single gene locus for the partial dominance of yellow seed colour. Of 810 randomly amplified polymorphic DNA (RAPD) primers, 240 (29.6%) revealed polymorphisms between the parents. Of the 240 RAPD primers and 512 amplified fragment length polymorphism (AFLP) primer pairs, four RAPDs and 16 AFLP pairs showed polymorphisms between the bulks, with two RAPD and eight AFLP markers being identified in the vicinity of the seed-coat colour gene locus using a DH progeny population—derived from the cross Hui5148-2×No.2127-17—of 127 individuals in combination with the bulked segregant analysis strategy. Seven of these latter ten markers were linked to the allele for yellow seed, whereas the other three were linked to the allele for black seed. The seed-coat colour gene locus was bracketed by two tightly linked markers, EA02MG08 (2.4 cM) and S1129 (3.9 cM). The partial dominance and single gene control of the yellow seed-coat colour trait together with the available molecular markers will greatly facilitate the future breeding of yellow-seeded hybrid varieties.     

Construction of genetic linkage map of the medicinal and ornamental plant <Emphasis Type="Italic">Catharanthus roseus</Emphasis>

An integrated genetic linkage map of the medicinal and ornamental plant Catharanthus roseus, based on different types of molecular and morphological markers was constructed, using a F₂ population of 144 plants. The map defines 14 linkage groups (LGs) and consists of 131 marker loci, including 125 molecular DNA markers (76 RAPD, 3 RAPD combinations; 7 ISSR; 2 EST-SSR from Medicago truncatula and 37 other PCR based DNA markers), selected from a total of 472 primers or primer pairs, and six morphological markers (stem pigmentation, leaf lamina pigmentation and shape, leaf petiole and pod size, and petal colour). The total map length is 1131.9 cM (centiMorgans), giving an average map length and distance between two markers equal to 80.9 cM and 8.6 cM, respectively. The morphological markers/genes were found linked with nearest molecular or morphological markers at distances varying from 0.7 to 11.4 cM. Linkage was observed between the morphological markers concerned with lamina shape and petiole size of leaf on LG1 and leaf, stem and petiole pigmentation and pod size on LG8. This is the first genetic linkage map of C. roseus.     

Inheritance and molecular mapping of a downy mildew resistance gene, Pl 13 in cultivated sunflower (Helianthus annuus L.)

The inheritance of resistance to sunflower downy mildew (SDM) derived from HA-R5 conferring resistance to nine races of the pathogen has been determined and the new source has been designated as Pl ₁₃ . The F₂ individuals and F₃ families of the cross HA-R5 (resistant) × HA 821 (susceptible) were screened against the four predominant SDM races 300, 700, 730, and 770 in separate tests which indicated dominant control by a single locus or a cluster of tightly linked genes. Bulked segregant analysis (BSA) was carried out on 116 F₂ individuals with 500 SSR primer pairs that resulted in the identification of 10 SSR markers of linkage groups 1 (9 markers) and 10 (1 marker) of the genetic map (Tang et al. in Theor Appl Genet 105:1124–1136, 2002) that distinguished the bulks. Of these, the SSR marker ORS 1008 of linkage group 10 was tightly linked (0.9 cM) to the Pl ₁₃ gene. Genotyping the F₂ population and linkage analysis with 20 polymorphic primer pairs located on linkage group 10 failed to show linkage of the markers with downy mildew resistance and the ORS 1008 marker. Nevertheless, validation of polymorphic SSR markers of linkage group 1 along with six RFLP-based STS markers of linkage group 12 of the RFLP map of Jan et al. (Theor Appl Genet 96:15–22, 1998) corresponding to linkage group 1 of the SSR map, mapped seven SSR markers (ORS 965-1, ORS 965-2, ORS 959, ORS 371, ORS 716, and ORS 605) including ORS 1008 and one STS marker (STS10D6) to linkage group 1 covering a genetic distance of 65.0 cM. The Pl ₁₃ gene, as a different source with its location on linkage group 1, was flanked by ORS 1008 on one side at a distance of 0.9 cM and ORS 965-1 on another side at a distance of 5.8 cM. These closely linked markers to the Pl ₁₃ gene provide a valuable basis for marker-assisted selection in sunflower breeding programs.     

Molecular mapping of the Oregon Wolfe Barleys: a phenotypically polymorphic doubled-haploid population

A phenotypically polymorphic barley (Hordeum vulgare L.) mapping population was developed using morphological marker stocks as parents. Ninety-four doubled-haploid lines were derived for genetic mapping from an F₁ using the Hordeum bulbosum system. A linkage map was constructed using 12 morphological markers, 87 restriction fragment length polymorphism (RFLP), five random amplified polymorphic DNA (RAPD), one sequence-tagged site (STS), one intron fragment length polymorphism (IFLP), 33 simple sequence repeat (SSR), and 586 amplified fragment length polymorphism (AFLP) markers. The genetic map spanned 1,387 cM with an average density of one marker every 1.9 cM. AFLP markers tended to cluster on centromeric regions and were more abundant on chromosome 1 (7H). RAPD markers showed a high level of segregation distortion, 54% compared with the 26% observed for AFLP markers, 27% for SSR markers, and 18% for RFLP markers. Three major regions of segregation distortion, based on RFLP and morphological markers, were located on chromosomes 2 (2H), 3 (3H), and 7 (5H). Segregation distortion may indicate that preferential gametic selection occurred during the development of the doubled-haploid lines. This may be due to the extreme phenotypes determined by alleles at morphological trait loci of the dominant and recessive parental stocks. Several molecular markers were found to be closely linked to morphological loci. The linkage map reported herein will be useful in integrating data on quantitative traits with morphological variants and should aid in map-based cloning of genes controlling morphological traits. Received: 23 August 2000 / Accepted: 15 December 2000     

Molecular mapping of gene Gm-6(t) which confers resistance against four biotypes of Asian rice gall midge in China

The Chinese rice cultivar Duokang #1 carries a single dominant gene Gm-6(t) that confers resistance to the four biotypes of Asian rice gall midge (Orseolia oryzae Wood-Mason) known in China. Bulked segregant analysis was performed on progeny of a cross between Duokang #1 and the gall midge-susceptible cultivar Feng Yin Zhan using the RAPD method. The RAPD marker OPM06₍₁₄₀₀₎ amplified a locus linked to Gm-6(t). The locus was subsequently mapped to rice chromosome 4 in a region flanked by cloned RFLP markers RG214 and RG163. Fine mapping of Gm-6(t) revealed that markers RG214 and RG476 flanked the gene at distances of 1.0 and 2.3 cM, respectively. Another gall midge resistance gene, Gm-2, mapped previously to chromosome 4, is located about 16 cM from Gm-6(t), to judge by data from a segregating population derived from a cross between Duokang #1 and the Indian cultivar Phalguna that carries Gm-2. We developed a PCR-based marker-assisted selection kit for transfer of the Gm-6(t) gene into Ming Hui 63 and IR50404, two parental lines commonly used in hybrid rice production in China. The kit contains PCR primer pairs based on the terminal sequences of the RG214 and RG476 clones. Polymorphism between Duokang #1 and the hybrid parental lines was found at these markers after digestion of the PCR products with specific restriction endonucleases. The kit will accelerate introduction of gall midge resistance into hybrid rice in China. Received: 18 May 2000 / Accepted: 9 March 2001     

Isolation and characterization of RAPD-based markers linked to the beet cyst nematode resistance locus (Hs1 pat-1) on chromosome 1 of B. patellaris

A beet cyst nematode (BCN)-resistant telosomic addition of B. patellaris chromosome 1 in B. vulgaris was used to isolate 6 RAPD markers linked to the BCN resistance locus Hs1 ^pat-1. Southern analysis showed that the analyzed RAPD products contain either low-, middle or high-repetitive DNA. The relative positions of the random amplified polymorphic DNA (RAPD) markers and of the restriction fragment length polymorphism (RFLP) loci corresponding to the low-repetitive RAPD products were determined by deletion mapping using a panel of seven nematode-resistant B. patellaris chromosome-1 fragment additions. One RAPD marker, OPB11₈₀₀, was found to be present in two copies on the long arm telosome of B. patellaris chromosome 1. These copies are closely linked to the BCN resistance gene and flank the gene on both sides. On the basis of the nucleotide sequence of OPB11₈₀₀, sequence-tagged site (STS) primers were developed that amplify specific fragments derived from the two OPB11₈₀₀ loci. These STS markers can be used in the map-based cloning of the BCN gene, as they define start and finishing points of a chromosomal walk towards the Hs1 ^pat-1 locus. Two copies of the middle-repetitive OPX2₁₁₀₀ marker were mapped in the same interval of the deletion mapping panel as the resistance gene locus and thereby belong to the nearest markers as yet found for the BCN gene in B. patellaris.     

Identification and validation of molecular markers linked to the leaf rust resistance gene Lr19 in wheat

A leaf rust resistance gene Lr19 on the chromosome 7DL of wheat derived from Agropyron elongatum was tagged with random amplified polymorphic DNA (RAPD) and microsatellite markers. The F₂ population of 340 plants derived from a cross between the leaf rust resistant near-isogenic line (NIL) of Thatcher (Tc + Lr19) and leaf rust susceptible line Agra Local that segregated for dominant monogenic leaf rust resistance was utilized for generating the mapping population. The molecular markers were mapped in the F₂ derived F₃ homozygous population of 140 seedlings. Sixteen RAPD markers were identified as linked to the alien gene Lr19 among which eight were in a coupling phase linkage. Twelve RAPD markers co-segregated with Lr19 locus. Nine microsatellite markers located on the long arm of chromosome 7D were also mapped as linked to the gene Lr19, including 7 markers which co-segregated with Lr19 locus, thus generating a saturated region carrying 25 molecular markers linked to the gene Lr19 within 10.2 ± 0.062 cM on either side of the locus. Two RAPD markers S265₅₁₂ and S253₇₃₇ which flanked the locus Lr19 were converted to sequence characterized amplified region markers SCS265₅₁₂ and SCS253₇₃₆, respectively. The marker SCS265₅₁₂ was linked with Lr19 in a coupling phase and the marker SCS253₇₃₆ was linked in a repulsion phase, which when used together mimicked one co-dominant marker capable of distinguishing the heterozygous resistant seedlings from the homozygous resistant. The molecular markers were validated on NILs mostly in Thatcher background isogenic for 44 different Lr genes belonging to both native and alien origin. The validation for polymorphism in common leaf rust susceptible cultivars also confirmed the utility of these tightly linked markers to the gene Lr19 in marker-assisted selection.     

Linkage analysis of sex determination in the honey bee (Apis mellifera)

A colony-level phenotype was used to map the major sex determination locus (designatedX) in the honey bee (Apis mellifera). Individual queen bees (reproductive females) were mated to single drones (fertile males) by instrumental insemination. Haploid drone progeny of an F1 queen were each backcrossed to daughter queens from one of the parental lines. Ninety-eight of the resulting colonies containing backcross progeny were evaluated for the trait low brood-viability resulting from the production of diploid drones that were homozygous atX. DNA samples from the haploid drone fathers of these colonies were used individually in polymerase chain reactions (PCR) with 10-base primers. These reactions generated random amplified polymorphic DNA (RAPD) markers that were analyzed for cosegregation with the colony-level phenotype. One RAPD marker allele was shared by 22 of 25 drones that fathered low brood-viability colonies. The RAPD marker fragment was cloned and partially sequenced. Two primers were designed that define a sequence-tagged site (STS) for this locus. The primers amplified DNA marker fragments that cosegregated with the original RAPD marker. In order to more precisely estimate the linkage betweenX and the STS locus, another group of bees consisting of progeny from one of the low-brood viability colonies was used in segregation analysis. Four diploid drones and 181 of their diploid sisters (workers, nonfertile females) were tested for segregation of the RAPD and STS markers. The cosegregating RAPD and STS markers were codominant due to the occurrence of fragment-length alleles. The four diploid drones were homozygous for these markers but only three of the 181 workers were homozygotes (recombinants). Therefore the distance betweenX and the STS locus was estimated at 1.6 cM. An additional linked marker was found that was 6.6 cM from the STS locus.     

Mapping of AFLP markers linked to seed coat colour loci in<Emphasis Type="Italic"> Brassica juncea</Emphasis> (L.) Czern

Association mapping of the seed-coat colour with amplified fragment length polymorphism (AFLP) markers was carried out in 39 Brassica juncea lines. The lines had genetically diverse parentages and varied for seed-coat colour and other morphological characters. Eleven AFLP primer combinations were used to screen the 39 B. juncea lines, and a total of 335 polymorphic bands were detected. The bands were analysed for association with seed-coat colour using multiple regression analysis. This analysis revealed 15 markers associated with seed-coat colour, obtained with eight AFLP primer combinations. The marker E-ACA/M-CTG₃₅₀ explained 69% of the variation in seed-coat colour. This marker along with markers E-AAC/M-CTC₂₃₅ and E-AAC/M-CTA₂₅₀ explained 89% of the total variation. The 15 associated markers were validated for linkage with the seed-coat colour loci using a recombinant inbred line (RIL) mapping population. Bands were amplified with the eight AFLP primer combinations in 54 RIL progenies. Of the 15 associated markers, 11 mapped on two linkage groups. Eight markers were placed on linkage group 1 at a marker density of 6.0 cM, while the remaining three were mapped on linkage group 2 at a marker density of 3.6 cM. Marker E-ACA/M-CTG₃₅₀ co-segregated with Gene1 controlling seed-coat colour; it was specific for yellow seed-coat colour and mapped to linkage group 1. Marker E-AAC/M-CTC₂₃₅ (AFLP8), which had been studied previously, was present on linkage group 2; it was specific for brown seed-coat colour. Since AFLP markers are not adapted for large-scale applications in plant breeding, it is important to convert these to sequence-characterised amplified region (SCAR) markers. Marker E-AAC/M-CTC₂₃₅ (AFLP8) had been previously converted into a SCAR. Work is in progress to convert the second of the linked markers, E-ACA/M-CTG₃₅₀, to a SCAR. The two linked AFLP markers converted to SCARs will be useful for developing yellow-seeded B. juncea lines by means of marker-assisted selection.Communicated by H.F. Linskens