Engineering a recyclable elastin‐like polypeptide capturing scaffold for non‐chromatographic protein purification

Previously, we reported a non‐chromatographic protein purification method exploiting the highly specific interaction between the dockerin and cohesin domains from Clostridium thermocellum and the reversible aggregation property of elastin‐like polypeptide (ELP) to provide fast and cost‐effective protein purification. However, the bound dockerin‐intein tag cannot be completely dissociated from the ELP‐cohesin capturing scaffold due to the high binding affinity, resulting in a single‐use approach. In order to further reduce the purification cost by recycling the ELP capturing scaffold, a truncated dockerin domain with the calcium‐coordinating function partially impaired was employed. We demonstrated that the truncated dockerin domain was sufficient to function as an effective affinity tag, and the target protein was purified directly from cell extracts in a single binding step followed by intein cleavage. The efficient EDTA‐mediated dissociation of the bound dockerin‐intein tag from the ELP‐cohesin capturing scaffold was realized, and the regenerated ELP capturing scaffold was reused in another purification cycle without any decrease in the purification efficiency. This recyclable non‐chromatographic based affinity method provides an attractive approach for efficient and cost‐effective protein purification. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:968–971, 2013     

Characterization of a dockerin-based affinity tag: application for purification of a broad variety of target proteins

Cellulose, a major component of plant matter, is degraded by a cell surface multiprotein complex called the cellulosome produced by several anaerobic bacteria. This complex coordinates the assembly of different glycoside hydrolases, via a high-affinity Ca(2+)-dependent interaction between the enzyme-borne dockerin and the scaffoldin-borne cohesin modules. In this study, we characterized a new protein affinity tag, ΔDoc, a truncated version (48 residues) of the Clostridium thermocellum Cel48S dockerin. The truncated dockerin tag has a binding affinity (K(A)) of 7.7 × 10(8)M(-1), calculated by a competitive enzyme-linked assay system. In order to examine whether the tag can be used for general application in affinity chromatography, it was fused to a range of target proteins, including Aequorea victoria green fluorescent protein (GFP), C. thermocellum β-glucosidase, Escherichia coli thioesterase/protease I (TEP1), and the antibody-binding ZZ-domain from Staphylococcus aureus protein A. The results of this study significantly extend initial studies performed using the Geobacillus stearothermophilus xylanase T-6 as a model system. In addition, the enzymatic activity of a C. thermocellum β-glucosidase, purified using this approach, was tested and found to be similar to that of a β-glucosidase preparation (without the ΔDoc tag) purified using the standard His-tag. The truncated dockerin derivative functioned as an effective affinity tag through specific interaction with a cognate cohesin, and highly purified target proteins were obtained in a single step directly from crude cell extracts. The relatively inexpensive beaded cellulose-based affinity column was reusable and maintained high capacity after each cycle. This study demonstrates that deletion into the first Ca(2+)-binding loop of the dockerin module results in an efficient and robust affinity tag that can be generally applied for protein purification.     

Optimization of elastin‐like polypeptide fusions for expression and purification of recombinant proteins in plants

The demand for recombinant proteins for medical and industrial use is expanding rapidly and plants are now recognized as an efficient, inexpensive means of production. Although the accumulation of recombinant proteins in transgenic plants can be low, we have previously demonstrated that fusions with an elastin‐like polypeptide (ELP) tag can significantly enhance the production yield of a range of different recombinant proteins in plant leaves. ELPs are biopolymers with a repeating pentapeptide sequence (VGVPG)_n that are valuable for bioseparation, acting as thermally responsive tags for the non‐chromatographic purification of recombinant proteins. To determine the optimal ELP size for the accumulation of recombinant proteins and their subsequent purification, various ELP tags were fused to green fluorescent protein, interleukin‐10, erythropoietin and a single chain antibody fragment and then transiently expressed in tobacco leaves. Our results indicated that ELP tags with 30 pentapeptide repeats provided the best compromise between the positive effects of small ELP tags (n = 5–40) on recombinant protein accumulation and the beneficial effects of larger ELP tags (n = 80–160) on recombinant protein recovery during inverse transition cycling (ITC) purification. In addition, the C‐terminal orientation of ELP fusion tags produced higher levels of target proteins, relative to N‐terminal ELP fusions. Importantly, the ELP tags had no adverse effect on the receptor binding affinity of erythropoietin, demonstrating the inert nature of these tags. The use of ELP fusion tags provides an approach for enhancing the production of recombinant proteins in plants, while simultaneously assisting in their purification. Biotechnol. Bioeng. 2009;103: 562–573. © 2009 Wiley Periodicals, Inc.     

Engineered proteins containing the cohesin and dockerin domains from Clostridium thermocellum provides a reversible, high affinity interaction for biotechnology applications

The cohesin-dockerin interaction, which is responsible for the formation of the cellulosome complex of cellulolytic bacteria, is a calcium-dependent, high affinity interaction. In this study, the cohesin (Cip7) and dockerin (Doc) domains of Clostridium thermocellum were fused to the cellulose-binding domain (CBD) of C. cellulovorans and the antibody-binding domain, protein LG, respectively, to form CBD-Cip7 and LG-Doc. Immobilised CBD-Cip7 was able to bind LG-Doc and subsequently antibody as determined using surface plasmon resonance. Binding was reversed by the removal of Ca2+ with EDTA. The dockerin containing fusion protein was affinity purified using an immobilised cohesin domain. Elution of the LG-Doc from the cohesin column was with EDTA. This affinity chromatography was repeated using an LG-dockerin column for the purification of cohesin fusion protein. The fusion proteins created in this report have shown that the properties of the cohesin and dockerin domains can be transferred to other protein domains and that the interaction between the cohesin and dockerin is specific, Ca2+ -dependent and reversible. We have shown that the cohesin-dockerin interaction has several properties making it suitable for use in recombinant fusion protein production and purification.     

Recombinant protein purification by self-cleaving aggregation tag

A simple technique is presented for non-chromatographic purification of recombinant proteins expressed in Escherichia coli. This method is based on a reversibly precipitating, self-cleaving purification tag. The tag is made up of two components: an elastin-like polypeptide (ELP), which reversibly self-associates in high-salt buffers at temperatures above 30 degrees C; and an intein, which causes the ELP tag to self-cleave in response to a mild pH shift. Thus, a tripartite ELP-intein-target protein precursor can be purified by cycles of salt addition, heating and centrifugation. Once purified, intein-mediated self-cleavage, followed by precipitation of the cleaved ELP tag, allows easy and effective isolation of the pure, native target protein without the need for chromatographic separations. Recoveries of 50-100 mg of cleaved, native target protein per liter of shake-flask culture have been achieved for over a dozen proteins, typically in 8-24 h depending on specific process parameters.     

Building a foundation for structure‐based cellulosome design for cellulosic ethanol: Insight into cohesin‐dockerin complexation from computer simulation

The organization and assembly of the cellulosome, an extracellular multienzyme complex produced by anaerobic bacteria, is mediated by the high‐affinity interaction of cohesin domains from scaffolding proteins with dockerins of cellulosomal enzymes. We have performed molecular dynamics simulations and free energy calculations on both the wild type (WT) and D39N mutant of the C. thermocellum Type I cohesin‐dockerin complex in aqueous solution. The D39N mutation has been experimentally demonstrated to disrupt cohesin‐dockerin binding. The present MD simulations indicate that the substitution triggers significant protein flexibility and causes a major change of the hydrogen‐bonding network in the recognition strips—the conserved loop regions previously proposed to be involved in binding—through electrostatic and salt‐bridge interactions between β‐strands 3 and 5 of the cohesin and α‐helix 3 of the dockerin. The mutation‐induced subtle disturbance in the local hydrogen‐bond network is accompanied by conformational rearrangements of the protein side chains and bound water molecules. Additional free energy perturbation calculations of the D39N mutation provide differences in the cohesin‐dockerin binding energy, thus offering a direct, quantitative comparison with experiments. The underlying molecular mechanism of cohesin‐dockerin complexation is further investigated through the free energy profile, that is, potential of mean force (PMF) calculations of WT cohesin‐dockerin complex. The PMF shows a high‐free energy barrier against the dissociation and reveals a stepwise pattern involving both the central β‐sheet interface and its adjacent solvent‐exposed loop/turn regions clustered at both ends of the β‐barrel structure.     

High-throughput purification of recombinant proteins using self-cleaving intein tags

High throughput methods for recombinant protein production using E. coli typically involve the use of affinity tags for simple purification of the protein of interest. One drawback of these techniques is the occasional need for tag removal before study, which can be hard to predict. In this work, we demonstrate two high throughput purification methods for untagged protein targets based on simple and cost-effective self-cleaving intein tags. Two model proteins, E. coli beta-galactosidase (βGal) and superfolder green fluorescent protein (sfGFP), were purified using self-cleaving versions of the conventional chitin-binding domain (CBD) affinity tag and the nonchromatographic elastin-like-polypeptide (ELP) precipitation tag in a 96-well filter plate format. Initial tests with shake flask cultures confirmed that the intein purification scheme could be scaled down, with >90% pure product generated in a single step using both methods. The scheme was then validated in a high throughput expression platform using 24-well plate cultures followed by purification in 96-well plates. For both tags and with both target proteins, the purified product was consistently obtained in a single-step, with low well-to-well and plate-to-plate variability. This simple method thus allows the reproducible production of highly pure untagged recombinant proteins in a convenient microtiter plate format.     

Small-scale, high-throughput method for plant N-glycan preparation for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry analysis

Proteins fused to the elastin-like polypeptide (ELP) tag can be selectively separated from crude cell extract without chromatography. To avoid the interference of the ELP tag on properties of the target protein, it is necessary to remove the ELP tag from target protein by protease digestion. Therefore, an additional chromatographic purification step is required to remove the proteases, and this is time- and labor-consuming. Here we demonstrate the utility of the ELP-tagged proteases for cleavage of ELP fusion proteins, allowing one-step removal of the cleaved ELP tag and ELP-tagged proteases without chromatography.     

Purification of Escherichia coli RNA polymerase using a self-cleaving elastin-like polypeptide tag

A self‐cleaving elastin‐like polypeptide (ELP) tag was used to purify the multisubunit Escherichia coli RNA polymerase (RNAP) via a simple, nonchromatographic method. To accomplish this, the RNAP α subunit was tagged with a self‐cleaving ELP‐intein tag and coexpressed with the β, β′, and ω subunits. The assembled RNAP was purified with its associated subunits, and was active and acquired at reasonable yield and purity. To remove residual polynucleotides bound to the purified RNAP, two polymer precipitation methods were investigated: polyethyleneimine (PEI) and polyethylene (PEG) precipitation. The PEG procedure was shown to enhance purity and was compatible with downstream ELP‐intein purification. Thus, this simple ELP‐based method should be applicable for the nonchromatographic purification of other recombinant, in vivo‐assembled multisubunit complexes in a single step. Further, the simplicity and low cost of this method will likely facilitate scale up for large‐scale production of additional multimeric protein targets. Finally, this technique may have utility in isolating protein interaction partners that associate with a given target.     

Production of functional agarolytic nano-complex for the synergistic hydrolysis of marine biomass and its potential application in carbohydrate-binding module-utilizing one-step purification

Marine algal polysaccharides are promising alternative resources to terrestrial biomass. Agarolytic enzymes degrade agarose to various kinds of oligosaccharides. In this study, we expressed miniCbpA, a recombinant scaffolding protein from Clostridium cellulovorans, in Escherichia coli. To assemble the agarolytic complex via cohesin–dockerin interaction, we constructed a chimeric agarase cAgaB from Zobellia galactanivorans containing the catalytic domain of AgaB fused with a dockerin domain from C. cellulovorans EngB. The assembly of functional agarolytic complexes increased the activity against the agar substrate approximately 1.4-fold compared with that for the corresponding enzymes alone. The carbohydrate-binding module (CBM) of miniCbpA was used as a tag for CBM-utilizing one-step purification using cellulose as a support. This is the first report on the formation of agarolytic complexes using the cohesin–dockerin interaction system. The assembly of agar-degrading complexes will lead to the commercial production of useful products from agar biomass at low costs.     

Interaction between a Type-II Dockerin Domain and a Type-II Cohesin Domain from Clostridium thermocellum Cellulosome

The interaction between the type-II dockerin domain of the scaffoldin protein CipA and the type-II cohesin domain of the outer layer protein SdbA is the fundamental mechanism for anchoring the cellulosome to the cell surface of Clostridium thermocellum. We constructed and purified a dockerin polypeptide and a cohesin polypeptide, and determined affinity constants of the interaction between them by the surface plasmon resonance method. The dissociation constant (K _D) value was 1.8×10^?9 M, which is a little larger than that for the combination of a type-I dockerin and a type-I cohesin.     

The Synthesis and Biology of Fluorinated Prostacyclins

Abstract

Clostridium thermocellum produces a highly active cellulase system that consists of a high-M_r multienzyme complex termed cellulosome. Hydrolytic components of the cellulosome are organized around a large, noncatalytic glycoprotein termed CipA that acts both as a scaffolding component and a cellulose-binding factor. Catalytic subunits of the cellulosome bear conserved, noncatalytic subdomains, termed dockerin domains, which bind to receptor domains of CipA, termed cohesin domains. CipA includes nine cohesin domains, a cellulose-binding domain, and a specialized dockerin domain. Proteins of the cell envelope carrying cohesin domains that specifically bind the dockerin domain of CipA have been identified. These proteins may mediate anchoring of the cellulosomes to the cell surface. Cellulase complexes similar to the cellulosome of C. thermocellum are produced by several cellulolytic clostridia. High-Mr multienzyme complexes have also been identified in anaerobic rumen fungi. The architecture of the fungal complexes also seems to rely on the interaction of conserved, noncatalytic docking domains with a scaffolding component. However, the sequence of the fungal docking domains bears no resemblance to the clostridial dockerin domains, suggesting that the fungal and clostridial complexes arose independently.     

Analysis of cohesin-dockerin interactions using mutant dockerin proteins

Clostridial cellulosomes are cellulolytic complexes that are formed by highly specific interactions between one of the repeated cohesin modules present in the scaffolding protein and a dockerin module of the catalytic components. Although Clostridium thermocellum Xyn11A dockerin has a typical C. thermocellum dockerin sequence, in which two amino acid residues are species specifically conserved within the two segments of the dockerin modules, it can recognize Clostridium josui cohesin modules in a non-species-specific manner. The importance of these two conserved amino acids, which are part of the recognition site of the cohesin and dockerin interaction, was investigated by introducing mutations into the first and/or the second segments of the Xyn11A dockerin. Mutations in the first segment did not affect the interactions between dockerin and C. thermocellum and C. josui cohesins. However, mutations in the second segment prevented binding to cohesin proteins. A second round of mutations within the first segment re-established the affinity for both the C. thermocellum and the C. josui cohesins. However, this was not observed for a 'conventional' dockerin, Xyn10C. These results suggest that the combination of the first and second dockerin segments is important for the target recognition.     

利用小肽控制的基于蛋白质内含子非层析标签制备重组蛋白(英文)

基于蛋白质内含子的蛋白质纯化自我断裂标签已经被广泛使用超过15年之久.但这一系统体内表达过程的提前断裂一直是限制这一技术广泛应用的瓶颈,特别是在需要高温表达和长表达周期的真核表达系统中.本研究介绍了一种利用小肽控制的基于蛋白质内含子和非层析标签ELP(elastin-like polypeptide)的自我断裂系统.在这一系统中,蛋白质内含子的体内外活性严格受到其结构互补小肽控制.在体内表达不含有互补小肽时,蛋白质内含子不具有活性;而在体外添加结构互补小肽,蛋白质内含子结构恢复并发生C端断裂反应释放目的蛋白.由于非层析标签ELP的引入,因此整个纯化过程可以简单地通过几步机械沉淀完成.此外,这一系统反应pH、小肽与前体蛋白之间的摩尔比及断裂速率也一并进行了系统的研究.     

Challenges and recent advances in affinity purification of tag-free proteins

There is currently no generic, simple, low-cost method for affinity chromatographic purification of proteins in which the purified product is free of appended tags. Existing approaches for the purification of tagless proteins fall into two broad categories: (1) direct affinity-based capture of tag-free proteins that utilize affinity ligands specific to the target protein or class of target protein, and (2) removal of an appended affinity tag following tag-mediated protein capture. This paper reviews current state-of-the-art approaches for tagless protein purification in both categories, including specific examples of affinity ligands used for the capture of different classes of proteins and cleavage systems for affinity tag removal following chromatographic capture. A particular focus of this review is on recent developments in affinity tag removal systems utilizing split inteins.     

A dual ELP-tagged split intein system for non-chromatographic recombinant protein purification

Self-cleaving elastin-like protein (ELP) tags provide a very promising tool for recombinant protein purification. With this method, the target protein is purified by simple ELP-mediated precipitation steps, followed by self-cleavage and removal of the ELP tag. Unfortunately, however, inteins usually experience some level of pre-cleavage during protein expression, which can significantly decrease final yields. In this study, we solve this problem by splitting the intein into two ELP-tagged segments. Each segment is incapable of pre-cleavage alone, but the assembled segments release the target protein rapidly when assembled in vitro. The result is the very tight control of the tag cleaving reaction, combined with the simplicity of the ELP purification method. Using this system, we successfully purified four different sizes of target proteins with final yields comparable to or higher than our original contiguous intein–ELP system. Further, we demonstrate a streamlined split intein method, where cells expressing the tagged intein segments are combined prior to cell lysis, allowing the segments to be co-purified in a single reaction mixture.     

Expression and purification of recombinant proteins from Escherichia coli: Comparison of an elastin-like polypeptide fusion with an oligohistidine fusion

Thermally responsive elastin like polypeptides (ELPs) can be used to purify proteins from Escherichia coli culture when proteins are expressed as a fusion with an ELP. Nonchromatographic purification of ELP fusion proteins, termed inverse transition cycling (ITC), exploits the reversible soluble-insoluble phase transition behavior imparted by the ELP tag. Here, we quantitatively compare the expression and purification of ELP and oligohistidine fusions of chloramphenicol acetyltransferase (CAT), blue fluorescent protein (BFP), thioredoxin (Trx), and calmodulin (CalM) from both a 4-h culture with chemical induction of the plasmid-borne fusion protein gene and a 24-h culture without chemical induction. The total protein content and functional activity were quantified at each ITC purification step. For CAT, BFP, and Trx, the 24-h noninduction culture of ELP fusion proteins results in a sevenfold increase in the yield of each fusion protein compared to that obtained by the 4-h-induced culture, and the calculated target protein yield is similar to that of their equivalent oligohistidine fusion. For these proteins, ITC purification of fusion proteins also results in approximately 75% recovery of active fusion protein, similar to affinity chromatography. Compared to chromatographic purification, however, ITC is inexpensive, requires no specialized equipment or reagents, and because ITC is a batch purification process, it is easily scaled up to accommodate larger culture volumes or scaled down and multiplexed for high-throughput, microscale purification; thus, potentially impacting both high-throughput protein expression and purification for proteomics and large scale, cost-effective industrial bioprocessing of pharmaceutically relevant proteins.     

Matching fusion protein systems for affinity analysis of two interacting families of proteins: the cohesin-dockerin interaction

Cellulosomes are multi-enzyme complexes that orchestrate the efficient degradation of cellulose and related plant cell wall polysaccharides. The complex is maintained by the high-affinity protein-protein interaction between two complementary modules: the cohesin and the dockerin. In order to characterize the interaction between different cohesins and dockerins, we have developed matching fusion-protein systems, which harbor either the cohesin or the dockerin component. For this purpose, corresponding plasmid cassettes were designed, which encoded for the following carrier proteins: (i) a thermostable xylanase with an appended His-tag; and (ii) a highly stable cellulose-binding module (CBM). The resultant xylanase-dockerin and CBM-cohesin fusion products exhibited high expression levels of soluble protein. The expressed, affinity-purified proteins were extremely stable, and the functionality of the cohesin or dockerin component was retained. The fusion protein system was used to establish a sensitive and reliable, semi-quantitative enzyme-linked affinity assay for determining multiple samples of cohesin-dockerin interactions in microtiter plates. A variety of cohesin-dockerin systems, which had been examined previously using other methodologies, were revisited applying the affinity-based enzyme assay, the results of which served to verify the validity of the approach.     

Biotin tagging coupled with amino acid‐coded mass tagging for efficient and precise screening of interaction proteome in mammalian cells

In mammalian cells, when tandem affinity purification approach is employed, the existence of untagged endogenous target protein and repetitive washing steps together result in overall low yield of purified/stable complexes and the loss of weakly and transiently interacting partners of biological significance. To avoid the trade‐offs involving in methodological sensitivity, precision, and throughput, here we introduce an integrated method, biotin tagging coupled with amino acid‐coded mass tagging, for highly sensitive and accurate screening of mammalian protein–protein interactions. Without the need of establishing a stable cell line, using a short peptide tag which could be specifically biotinylated in vivo, the biotin‐tagged target/bait protein was then isolated along with its associates efficiently by streptavidin magnetic microbeads in a single step. In a pulled‐down complex amino acid‐coded mass tagging serves as “in‐spectra” quantitative markers to distinguish those bait‐specific interactors from non‐specific background proteins under stringent criteria. Applying this biotin tagging coupled with amino acid‐coded mass tagging approach, we first biotin‐tagged in vivo a multi‐functional protein family member, 14‐3‐3ε, which was expressed at close to endogenous level. Starting with approximately 20 millions of 293T cells which were significantly less than what needed for a tandem affinity purification run, 266 specific interactors of 14‐3‐3ε were identified in high confidence.     

Engineering a reversible, high-affinity system for efficient protein purification based on the cohesin-dockerin interaction

Efficient degradation of cellulose by the anaerobic thermophilic bacterium, Clostridium thermocellum, is carried out by the multi-enzyme cellulosome complex. The enzymes on the complex are attached in a calcium-dependent manner via their dockerin (Doc) module to a cohesin (Coh) module of the cellulosomal scaffoldin subunit. In this study, we have optimized the Coh-Doc interaction for the purpose of protein affinity purification. A C. thermocellum Coh module was thus fused to a carbohydrate-binding module, and the resultant fusion protein was applied directly onto beaded cellulose, thereby serving as a non-covalent "activation" procedure. A complementary Doc module was then fused to a model protein target: xylanase T-6 from Geobacillus stearothermophilus. However, the binding to the immobilized Coh was only partially reversible upon treatment with EDTA, and only negligible amounts of the target protein were eluted from the affinity column. In order to improve protein elution, a series of truncated Docs were designed in which the calcium-coordinating function was impaired without appreciably affecting high-affinity binding to Coh. A shortened Doc of only 48 residues was sufficient to function as an effective affinity tag, and highly purified target protein was achieved directly from crude cell extracts in a single step with near-quantitative recovery of the target protein. Effective EDTA-mediated elution of the sequestered protein from the column was the key step of the procedure. The affinity column was reusable and maintained very high levels of capacity upon repeated rounds of loading and elution. Reusable Coh-Doc affinity columns thus provide an efficient and attractive approach for purifying proteins in high yield by modifying the calcium-binding loop of the Doc module.