Variations of Human Milk Protein Preparations from Individual Milk Samples

The acid coagulability of casein from 54 individual human milk samples and the variation of coagulability of their casein preparations by rennin were examined. The casein and whey protein preparations from individual human milk samples were also compared by polyacrylamide gel electrophoresis (PAE). Casein coagulated distinctly from 22 human milk samples when the pH was adjusted to 4.6 with acid, but it did not from other 32 samples. Twenty-two samples of casein preparations coagulated distinctly by rennin in the presence of calcium ions but 19 samples just became turbid. When the classification of human casein based on PAE pattern of major six bands was applied in our preparations, type A appeared most often and type C did least. Any regular relationship was not found between variation of the PAE pattern of casein preparations from individual human milk samples and that of acid coagulability or rennin coagulability.     

Preparation and characterization of milk calcium salts by using casein phosphopeptide

Milk calcium salt solution was prepared by the following procedures using casein phosphopeptides (CPP). To CPP solution, 1 M citric acid, 1 M CaCl2 and 1 M K2HPO4 were added with stirring, while adjusting the pH to 6.7. The prepared solution was left for 12 hr at 25 degrees C and then used for subsequent experiments, or lyophilized. The concentrations of organic phosphate of CPP, calcium, inorganic phosphate, and citrate in the typical milk salt solution were 7, 30, 22, and 10 mM, respectively, which were close to those in bovine milk. The lyophilized sample was easily dissolved in water. No crystal structure of hydroxyapatite was shown in the lyophilized milk calcium salts by X-ray diffraction analysis, although the pattern of KCl crystal was observed. The X-ray diffraction pattern of commercial whey mineral, which was prepared by precipitation at alkaline pH from rennet whey, was similar to that of hydroxyapatite. It was confirmed by high-performance gel chromatographic analysis that the form of calcium phosphate in the milk calcium salts was similar to that of casein micelles.     

Isolation and characterization of proteinases from the sarcocarp of snake-gourd fruit

Seven proteinases were isolated from the fruit of snake-gourd, Trichosanthes cucumeroides Maxim. Their isozymes are all serine proteinases, and homologous in their respective molecular weights, amino acid compositions, and enzymatic properties. Their molecular weight was estimated to be about 50,000. Using casein as a substrate, the maximum activity was found in the alkaline pH region. The optimum temperature using casein was 70 degrees C at pH 7.3. The enzymes were strongly inhibited by diisopropyl fluorophosphate and not inhibited by inhibitors of sulfhydryl or metalloproteases. The reduced and S-carboxymethylated insulin B-chain was used as a substrate in an investigation of the specificity. The enzyme was found to have a wide specificity for this substrate but preferentially hydrolyzed the peptide bonds involving the carboxyl groups of charged amino acid such as S-cm-cysteine, glutamic acid, histidine, arginine, and lysine. Experimental evidence indicated that the snake-gourd proteinases are similar in their properties to cucumisin, which is isolated from the sarcocarp of melon fruit.     

Hydrolysis by Indigenous Plasmin: Consequences for Enzymatic Cross-Linking and Acid-Induced Gel Formation of Non-Micellar Casein

Casein is a group of milk proteins with high nutritional value, and the exploitation of its techno-functional potentials has been investigated for decades. In this study, acid casein powder was dissolved in 0.1 mol/L phosphate buffers with different pH, resulting in casein solutions with pH 5.9, 6.6 and 7.3. During preparation and storage (40 °C) of the samples, casein hydrolysis was observed in size exclusion chromatography and gel electrophoresis. The degree of hydrolysis increased with increasing pH, and treatment of casein with commercial plasmin resulted in similar polypeptides, suggesting that the hydrolysis was caused by residual indigenous plasmin present in the acid casein powder. Most polypeptides could be cross-linked by microbial transglutaminase, except for one particular fraction which appeared at constant intensity in the chromatograms. The stiffness of acid-induced gels as determined in small amplitude oscillatory shear rheology decreased with increasing degree of hydrolysis, and was also lower for cross-linked samples when the preceding casein hydrolysis was more pronounced. Enzymatic cross-linking increased the resistance of casein against plasmin-related hydrolysis, presumably because of the resulting lysine modification. However, one particular fraction of polypeptides was released by hydrolysis in spite of cross-linking, suggesting that they did not contain lysine residues that are susceptible for mTGase. The results indicate that plasmin-related hydrolysis should be taken into account for the application of acid casein or sodium caseinate as additive in food design.

     

STUDIES IN THE PHYSICAL CHEMISTRY OF THE PROTEINS : III. THE RELATION BETWEEN THE AMINO ACID COMPOSITION OF CASEIN AND ITS CAPACITY TO COMBINE WITH BASE.

1. The methods of measuring the base-combining capacities of proteins have been considered, and the constants and corrections that are employed in their calculation have been critically examined. 2. The base-combining capacities of ten casein preparations have been determined. These differed from each other to a far greater extent than can be attributed to the experimental errors involved in their measurement and calculation. The variations were, moreover, systematic in manner, and can be explained as dependent upon the method employed in the preparation of the casein. 3. Casein that had never been exposed to greater alkalinities than those in which it exists in nature combined with approximately 0.0014 mols of sodium hydroxide per gm., while casein prepared nach Hammarsten, and casein that was saturated with base during its preparation, combined with approximately 0.0018 mols of sodium hydroxide per gm. 4. 1 mol of sodium hydroxide, therefore, combined with 735 gm. of casein that had not previously been exposed to alkaline reactions, or with 535 gm. of casein that had previously been saturated with base. 5. If the minimal molecular weight of casein, based upon its tryptophane content, is placed at 12,800, the native protein must, therefore, contain approximately eighteen acid groups, and in addition six acid groups that are released in alkaline solutions, and presumably represent internally bound groups. The total base-combining capacity therefore represents that of a substance with a molecular weight of 12,800 and containing twenty-four acid valences. 6. This base-combining capacity is no greater than can be accounted for on the basis of our knowledge of the structure and composition of casein. On the basis of a molecular weight of 12,800 casein contains at least 19 molecules of glutamic acid, 4 of aspartic, and 8 of hydroxyglutamic acid. If the amino acids in the protein molecule are bound to each other in polypeptide linkage, each of these thirty-one dicarboxylic acids should yield terminal groups. The ammonia in casein suggests that twelve of these groups are bound as amides. As many as nineteen carboxyl groups may, therefore, be free in the protein molecule. 7. Casein contains phosphorus. If this phosphorus represents phosphoric acid, and if we consider that all of the valences of this acid are either themselves free, or that they have liberated carboxyl groups by entering into the structure of the protein molecule, casein should contain nine additional acid groups. 8. Recent analytical results, therefore, indicate that casein contains at least nineteen, and possibly twenty-eight, free acid groups. The physicochemical measurements presented suggest that casein combines with base as though it contained twenty-four acid groups, of which six, or one-fourth, appear to be bound in the native protein. These experimental results are therefore in close agreement with the expectation on the basis of the classical theory of protein structure.     

Protective effect of casein toward Salmonella typhimurium in acid-milk

Lactic acid is the inhibitory agent in yoghurt responsible for the inhibition of Salmonella typhimurium. Casein, however, may exert a protective effect toward the survival of the salmonella in acid-milk products. Salmonella typhimurium was found to die-off 21.2% more rapidly in 18-h yoghurt-whey than in 18-h yoghurt at 37 degrees C with a pH of 3.85 and 1.42% lactic acid. When casein was added to yoghurt-whey, the die-off rate of the salmonellas was reduced to that found in yoghurt. The rate remained unchanged when 4.8% sodium caseinate was added to the whey. When 0 to 14% casein was added to the acid-whey the die-off rate changed from 9.7 to 24.0 min/log reduction of cells, respectively. There was a direct correlation between the increase in casein concentration and length of survival of the salmonellas. At a pH of 3.85, 4.2 or 4.5, the die-off rate was 6.5, 13.0 or 40 min/log reduction of cells in milk containing 1.42% lactic acid, and was 4.0, 10.0 or 33.3 min/log reduction, respectively, in whey with 1.42% lactic acid. Thus, the protective effect of casein toward Salm. typhimurium increased as the pH increased. This indicated that casein exerts a protective effect on Salm. typhimurium in acid dairy products and the degree of protection depends on the casein concentration, the form of the casein molecule and the pH.     

Protective effect of casein toward Salmonella typhimurium in acid-milk

Lactic acid is the inhibitory agent in yoghurt responsible for the inhibition of Salmonella typhimurium. Casein, however, may exert a protective effect toward the survival of the salmonella in acid-milk products. Salmonella typhimurium was found to die-off 21.2% more rapidly in 18-h yoghurt-whey than in 18-h yoghurt at 37 C with a pH of 3.85 and 1.42% lactic acid. When casein was added to yoghurt-whey, the die-off rate of the salmonellas was reduced to that found in yoghurt. The rate remained unchanged when 4.8% sodium caseinate was added to the whey. When 0 to 14% casein was added to the acid-whey the die-off rate changed from 9.7 to 24.0 min/log reduction of cells, respectively. There was a direct correlation between the increase in casein concentration and length of survival of the salmonellas. At a pH of 3.85, 4.2 or 4.5, the die-off rate was 6.5, 13.0 or 40 min/log reduction of cells in milk containing 1.42% lactic acid, and was 4.0, 10.0 or 33.3 min/log reduction, respectively, in whey with 1.42% lactic acid. Thus, the protective effect of casein toward Salm. typhimurium incieased as the pH increased. This indicated that casein exerts a protective effect on Salm. typhimurium in acid dairy products and the degree of protection depends on the casein concentration, the form of the casein molecule and the pH.     

alpha-Lactalbumin species variation, HAMLET formation, and tumor cell death

HAMLET (human alpha-lactalbumin made lethal to tumor cells) is a tumoricidal complex of apo alpha-lactalbumin and oleic acid, formed in casein after low pH treatment of human milk. This study examined if HAMLET-like complexes are present in casein from different species and if isolated alpha-lactalbumin from those species can form such complexes with oleic acid. Casein from human, bovine, equine, and porcine milk was separated by ion exchange chromatography and active complexes were only found in human casein. This was not explained by alpha-lactalbumin sequence variation, as purified bovine, equine, porcine, and caprine alpha-lactalbumins formed complexes with oleic acid with biological activity similar to HAMLET. We conclude that structural variation of alpha-lactalbumins does not preclude the formation of HAMLET-like complexes and that natural HAMLET formation in casein was unique to human milk, which also showed the highest oleic acid content.     

Thin casein films as prepared by spin-coating: influence of film thickness and of pH

Casein films were successfully prepared with the spin-coating technique of aqueous casein solutions on base-treated glass surfaces. The film structure is investigated in real space with optical microscopy and atomic force microscopy and for the first time in reciprocal space with grazing incidence small-angle X-ray scattering (GISAXS). The size of the substructures detected in the film increases with pH from 170 nm (pH 5.1) up to 490 nm (pH 9.4). Dynamic light scattering experiments reveal that the average diameters of casein micelles in solution exhibit the same quantitative increase. This result suggests that the substructures detected in the bulklike films with GISAXS reflect intact casein micelles. However, with thin homogeneous casein films, the micelle size diminishes with decreasing film thickness. This indicates that the moderate pressures introduced by spin-coating force the micelles to rearrange into a more compact structure.     

Use of fluorescamine-labeled casein as a substrate for assay of proteinases.

Conditions have been investigated for the use of fluorescamine-labeled casein as a substrate for fluorometric assay of proteinases. Fluorescamine-labeled casein can be prepared simply by mixing solutions of casein and fluorescamine at pH 8.0 and used without removal of the excess reagent or its hydrolysis product. The fluorescence of the labeled casein and its enzymatic digest is moderately stable in the range of pH 7.0 to 10.0. Activities can be determined by measuring the fluorescence of the hydrolysis products soluble in 0.1 M trichloro acetic acid solution at pH 4.0 after adjusting the pH of the acid-soluble fraction to 7.7. This method is suited for assay of proteinases active at neutral to slightly alkaline pH values, and is capable of quantitating about 0.05 microgram of trypsin or 0.5 microgram of alpha-chymotrypsin or papain. The assay can be done in the presence of large amounts of contaminating amino acid, protein and/or exopeptidases which may interfere with the ordinary assay of proteinases.     

Protein kinase activity associated with Fc gamma 2a receptor of a murine macrophage like cell line, P388D1

The properties of protein kinase activity associated with Fc receptor specific for IgG2a (Fc gamma 2aR) of a murine macrophage like cell line, P388D1, were investigated. IgG2a-binding protein isolated from the detergent lysate of P388D1 cells by affinity chromatography on IgG-Sepharose was found to contain four distinct proteins of Mr 50,000, 43,000, 37,000, and 17,000, which could be autophosphorylated upon incubation with [gamma-32P]ATP. The autophosphorylation of Fc gamma 2a receptor complex ceased when exogenous phosphate acceptors (casein or histone) were added in the reaction mixture. Casein was found to be a much better phosphate acceptor than histone in this system, as casein incorporated about 32-fold more 32P than histone did. Phosphorylation of casein catalyzed by Fc gamma 2a receptor complex was dependent on casein concentration (maximum phosphate incorporation being at 0.5 mg/mL), increased with time or temperature, was dependent on the concentration of ATP and Mg2+, and was maximum at pH near 8. Casein phosphorylation was significantly inhibited by a high concentration of Mn2+ (greater than 25 mM) or KCl (greater than 100 mM) or by a small amount of heparin (greater than 10 units/mL) and was enhanced about 2-fold by protamine. Casein kinase activity associated with Fc gamma 2a receptor used ATP as substrate with an apparent Km of 2 microM as well as GTP with an apparent Km of 10 microM. Prior heating (60 degrees C for 15 min) or treatment with protease (trypsin or Pronase) of Fc gamma 2a receptor complex almost totally abolished casein kinase activity.(ABSTRACT TRUNCATED AT 250 WORDS)     

Modification of cellulosic fibers by UV-irradiation. Part II: After treatments effects

This work presents the comparative study on the dyeing behavior of cellulose fibers in alkaline solutions and under the influence of UV radiation. The cellulosic fabrics were pretreated followed by conventional mercerization technique or treatment with UV irradiation. For different time duration the reorganization of cellulose fibers by swelling treatments in alkaline solutions results in numerous structural modifications, causing changes of their accessibility and/or reactivity. The results revealed that the swelling of the cellulosic fibers depends on type of pre-treatment, dose of the radiation and the concentration of alkaline solution used. SEM analysis confirmed that UV irradiation of the cellulosic fibers leads to a higher swelling in comparison with any concentration of NaOH treatment. In comparison of both the treatments, the mercerized cellulosic fibers have shown better tear and tensile strength as compared to the untreated and UV irradiated one. There is adverse effect of UV radiation on the mechanical properties of UV radiation. Moreover, no loss in weight was observed after exposing the cellulose fabrics surface to UV radiation.     

CASEIN VISCOSITY STUDIES

1. Viscosity and pH curves of casein dissolved in NaOH, KOH, LiOH, and NH₄OH are shown and it is found that a maximum viscosity occurs at about the same pH point with each alkali; i.e., 9.1 to 9.25. The magnitude of the viscosity is largest in ammonia solutions. 2. The maximum viscosity occurs in 8 to 10 per cent solutions of casein in alkalies when about 98 x 10^–5 gram equivalents of base are combined with 1 gram of casein. 3. A maximum viscosity occurs in the same region (pH 9.1 to 9.25) when casein is dissolved in Na₂CO₃, Na₃AsO₄, Na₂SO₃, NaF, and Na₂PO₃. 4. The maximum viscosity obtained with borax solutions of casein occurs at 8.15 to 8.2 pH. It is suggested that casein acts like mannitol, glycerol, etc., in increasing the dissociation of boric acid. 5. The flattening of the viscosity curves of casein solutions, following the decline from maximum, is shown to be due to alkaline hydrolysis whence casein no longer exists as such but is cleaved into a major protein containing no phosphorus or sulfur and less nitrogen. This cleavage commences at pH 10.0 to 10.5. 6. When casein is prepared from solutions that have been subjected to high temperatures (60°C. and above) or has otherwise been heated during its preparation, it yields solutions in alkalies of high viscosity.     

Chitosan hollow fiber membranes

Chitosan hollow fibers were produced by wet spinning, taking advantage of the unique rheological properties of highly viscous chitosan solutions in acetic acid. The mechanical and separation properties of hollow fibers were tested. The mechanical properties were determined by measuring tensile force, tensile stress, elongation, and initial elasticity module. The separation properties were specified by determining retention coefficients of particular blood components and determining cut-off of the membrane by the analysis of dextran molecular weight distribution in the feed and permeate using a technique of gel chromatography (GPC)-Shimadzu gel chromatograph.     

Production of casein hydrolysates by extracellular acid proteinases of immobilized Humicola lutea cells

Casein hydrolysis was studied during the cultivation of immobilized Humicola lutea cells producing acid proteinases. By monitoring the cultivation with time, various casein hydrolysates could be obtained, from partially modified proteins (yield 80%) with improved emulsion properties to peptones (yield > 50%) with a degree of hydrolysis >40%. The casein from the fermentation medium appeared to be simultaneously a nitrogen source, an inducer of proteinase biosynthesis, and a substrate for the production of casein hydrolysates. Casein (4%) and glucose (2%) ensured optimal cultivation conditions. The fungal cells, immobilized in calcium alginate beads, required a short cultivation time and demonstrated comparable hydrolysis of casein during five to seven reuses in batch mode. Correspondence to: B. Tchorbanov     

Phosphorylation of fibrinogen by casein kinase 1

Casein kinase 1 phosphorylated human fibrinogen, in a reaction that did not use GTP as phosphoryl donor and was neither stimulated by cyclic AMP or Ca2+, nor inhibited by the cyclic AMP-dependent protein kinase inhibitor protein. Maximal incorporation averaged 4 mol of phosphate per mol of fibrinogen, most of it in the largest CNBr-fragment of the alpha-chain. Phosphoamino acid analysis revealed that phosphorylation occurred only at seryl residues. The phosphorylation of fibrinogen by casein kinase 1 was reverted by alkaline phosphatase.     

Hydroxyapatite as a concentrating probe for phosphoproteomic analyses

A novel method for the selective enrichment of casein phosphoproteins/phosphopeptides (CPP) from complex mixtures is reported herein. This method employs ceramic hydroxyapatite (HA) as a solid-phase adsorbent to efficiently capture phosphoproteins and CPP from complex media. Casein was chosen as the model phosphoprotein to test the protocol. CPP immobilized on HA microgranules formed a complex that was included in the matrix-assisted laser desorption/ionization mass spectrometry (MALDI) matrix before desorbing directly from the well plate. Casein fractions with different levels of phosphorylation were desorbed based upon the specific concentration of trifluoroacetic acid (TFA) included in the MALDI matrix. The HA-bound casein enzymolysis was performed in situ with trypsin to remove non-phosphorylated peptides and isolate the immobilized CPP. The latter were recovered by centrifugation, dried, and co-crystallized with a 1% phosphoric acid (PA) solution in the matrix that was appropriate for detecting CPP in MALDI-MS spectra. This approach for the selection of casein/CPP resulted in the identification of 32 CPP by MALDI-time of flight (TOF). The analytical process involved two steps requiring ∼2 h, excluding the time required for the enzymatic reaction. The alkaline phosphatase (AP)-assisted de-phosphorylation of tryptic CPP allowed the phosphorylation level of peptides to be calculated concurrently with MALDI-TOF MS and liquid chromatography-electrospray ionization–mass spectrometry (LC–ESI–MS/MS). The effectiveness of the extraction procedure assayed on eggshell phosphoproteins resulted in the identification of 5 phosphoproteins and 14 derived phosphopeptides with a phosphoprotein global recovery of ∼70% at least.     

Polylactic acid composites incorporating casein functionalized cellulose nanowhiskers

Background

Polylactic acid (PLA) is considered to be a sustainable alternative to petroleum-based polymers for many applications. Using cellulose fiber to reinforce PLA is of great interest recently due to its complete biodegradability and potential improvement of the mechanical performance. However, the dispersion of hydrophilic cellulose fibers in the hydrophobic polymer matrix is usually poor without using hazardous surfactants. The goal of this study was to develop homogenously dispersed cellulose nanowhisker (CNW) reinforced PLA composites using whole milk casein protein, which is an environmentally compatible dispersant.

Results

In this study, whole milk casein was chosen as a dispersant in the PLA-CNW system because of its potential to interact with the PLA matrix and cellulose. The affinity of casein to PLA was studied by surface plasmon resonance (SPR) imaging. CNWs were functionalized with casein and used as reinforcements to make PLA composites. Fluorescent staining of CNWs in the PLA matrix was implemented as a novel and simple way to analyze the dispersion of the reinforcements. The dispersion of CNWs in PLA was improved when casein was present. The mechanical properties of the composites were studied experimentally. Compared to pure PLA, the PLA composites had higher Young’s modulus. Casein (CS) functionalized CNW reinforced PLA (PLA-CS-CNW) at 2 wt% filler content maintained higher strain at break compared to normal CNW reinforced PLA (PLA-CNW). The Young’s modulus of PLA-CS-CNW composites was also higher than that of PLA-CNW composites at higher filler content. However, all composites exhibited lower strain at break and tensile strength at high filler content.

Conclusions

The presence of whole milk casein improved the dispersion of CNWs in the PLA matrix. The improved dispersion of CNWs provided higher modulus of the PLA composites at higher reinforcement loading and maintained the strain and stress at break of the composites at relatively low reinforcement loading. The affinity of the dispersant to PLA is important for the ultimate strength and stiffness of the composites.

     

Taste threshold determination and side-preference in captive cockatiels (Nymphicus hollandicus)

The taste thresholds of caged cockatiels (Nymphicus hollandicus) for aqueous solutions of sodium chloride, citric acid, and sucrose were studied using two-choice taste-preference tests. The effects of location on the threshold were tested by putting the flavored solution in either the preferred or non-preferred locations (i.e. sides of cages) and offering water in the opposite location. Four parameters (total consumption, consumption from preferred side, consumption from non-preferred side, and proportion of test solution consumed) were measured at the end of 3-day test periods. Experiments were repeated with increasing concentration of test flavors until intake variables were significantly (p<0.05) affected. The results showed that birds distinguished (p<0.05) between purified water and 0.16 mol l(-1) sodium chloride, 0.36 mol l(-1) sucrose, or pH 5.5 citric acid. The likelihood of detecting a taste threshold was greater for sodium chloride and citric acid when these solutions were placed on the preferred side. In contrast, sucrose sensitivity was greater when this solution was offered on the non-preferred side.     

pH-dependent structures and properties of casein micelles

The association behavior of casein over a broad pH range has first been investigated by fluorescent technique together with DLS and turbidity measurements. Casein molecules can self-assemble into casein micelles in the pH ranges 2.0 to 3.0, and 5.5 to 12.0. The hydrophobic interaction, hydrogen bond and electrostatic action are the main interactions in the formation of casein micelles. The results show that the structure of casein micelles is more compact at low pH and looser at high pH. The casein micelle has the most compact structure at pH 5.5, when it has almost no electrostatic repulsion between casein molecules.