The molybdenum-cofactor: a crystallographic perspective

 The molybdenum-cofactor (Mo-co) consists of a mononuclear molybdenum or tungsten ion coordinated by one or two molybdopterin ligands. Crystallographic analyses have demonstrated that the molybdopterin ligands are tricyclic and nonplanar, and that they coordinate the metal through their dithiolene sulfurs. Additional ligands to the metal may be provided by amino acid side chains (including serine, cysteine and selenocysteine), as well as one or more nonprotein O or S ligands, such as oxo, hydroxo, and sulfido. The molybdopterin ligand may participate in the various electron transfer reactions associated with the catalytic mechanism of these proteins, as suggested by both oxidation state-dependent changes in the metal coordination environment and the molybdopterin structure, and by the interaction of the molybdopterin with other redox groups within Mo-co-containing enzymes. Received: 14 May 1997 / Accepted: 20 August 1997     

Resonance Raman characterization of biotin sulfoxide reductase. Comparing oxomolybdenum enzymes in the ME(2)SO reductase family

Resonance Raman spectroscopy has been used to define active site structures for oxidized Mo(VI) and reduced Mo(IV) forms of recombinant Rhodobacter sphaeroides biotin sulfoxide reductase expressed in Escherichia coli. On the basis of (18)O/(16)O labeling studies involving water and the alternative substrate dimethyl sulfoxide and the close correspondence to the resonance Raman spectra previously reported for dimethyl sulfoxide reductase (Garton, S. D., Hilton, J., Oku, H., Crouse, B. R., Rajagopalan, K. V., and Johnson, M. K. (1997) J. Am. Chem. Soc. 119, 12906-12916), vibrational modes associated with a terminal oxo ligand and the two molybdopterin dithiolene ligands have been assigned. The results indicate that the enzyme cycles between mono-oxo-Mo(VI) and des-oxo-Mo(IV) forms with both molybdopterin dithiolene ligands remaining coordinated in both redox states. Direct evidence for an oxygen atom transfer mechanism is provided by (18)O/(16)O labeling studies, which show that the terminal oxo group at the molybdenum center is exchangeable with water during redox cycling and originates from the substrate in substrate-oxidized samples. Biotin sulfoxide reductase is not reduced by biotin or the nonphysiological products, dimethyl sulfide and trimethylamine. However, product-induced changes in the Mo=O stretching frequency provide direct evidence for a product-associated mono-oxo-Mo(VI) catalytic intermediate. The results indicate that biotin sulfoxide reductase is thermodynamically tuned to catalyze the reductase reaction, and a detailed catalytic mechanism is proposed.     

The molybdenum site in the xanthine oxidase-related aldehyde oxidoreductase from Desulfovibrio gigas and a catalytic mechanism for this class of enzymes

 The crystal structure analysis of the aldehyde oxidoreductase from Desulfovibrio gigas was exceptionally revealing with regard to the ligands and structure of the molybdenum site and the mechanism of the hydroxylation reaction catalyzed. The metal is pentacoordinated by two sulfurs of the cis–dithiolene group of the molybdopterin cofactor and by facially arranged sulfido, oxo and water ligands. The latter is in hydrogen-bonding contact with the carboxylate group of Glu 869 and the hydroxyl group of an isopropanol molecule, a substrate analogue inhibitor. This steric arrangement strongly suggests a mechanism for the reductive half-cycle of the reaction with Glu 869 as the base, the metal-bound water as the source of the transferred hydroxyl group, and the sulfido group as the hydride acceptor. The geometry and the proposed mechanism are in agreement with density functional calculations on a model of the molybdenum site. In the oxidative half-reaction, electrons are withdrawn from Mo^rv through the rigidly held pterin ring system, via the iron-sulfur clusters, to the protein surface. Received: 25 June 1997 / Accepted: 20 August 1997     

Mechanistic and mutational studies of Escherichia coli molybdopterin synthase clarify the final step of molybdopterin biosynthesis

Biosynthesis of the molybdenum cofactor, a chelate of molybdenum or tungsten with a novel pterin, occurs in virtually all organisms including humans. In the cofactor, the metal is complexed to the unique cis-dithiolene moiety located on the pyran ring of molybdopterin. Escherichia coli molybdopterin synthase, the protein responsible for adding the dithiolene to a desulfo precursor termed precursor Z, is a dimer of dimers containing the MoaD and MoaE proteins. The sulfur used for dithiolene formation is carried in the form of a thiocarboxylate at the MoaD C terminus. Using an intein expression system for preparation of thiocarboxylated MoaD, the mechanism of the molybdopterin synthase reaction was examined. A stoichiometry of 2 molecules of thiocarboxylated MoaD per conversion of a single precursor Z molecule to molybdopterin was observed. Examination of several synthase variants bearing mutations in the MoaE subunit identified Lys-119 as a residue essential for activity and Arg-39 and Lys-126 as other residues critical for the reaction. An intermediate of the synthase reaction was identified and characterized. This intermediate remains tightly associated with the protein and is the predominant product formed by synthase containing the K126A variant of MoaE. Mass spectral data obtained from protein-bound intermediate are consistent with a monosulfurated structure that contains a terminal phosphate group similar to that present in molybdopterin.     

Heavy metal ions inhibit molybdoenzyme activity by binding to the dithiolene moiety of molybdopterin in Escherichia coli

Molybdenum insertion into the dithiolene group on the 6-alkyl side-chain of molybdopterin is a highly specific process that is catalysed by the MoeA and MogA proteins in Escherichia coli. Ligation of molybdate to molybdopterin generates the molybdenum cofactor, which can be inserted directly into molybdoenzymes binding the molybdopterin form of the molybdenum cofactor, or is further modified in bacteria to form the dinucleotide form of the molybdenum cofactor. The ability of various metals to bind tightly to sulfur-rich sites raised the question of whether other metal ions could be inserted in place of molybdenum at the dithiolene moiety of molybdopterin in molybdoenzymes. We used the heterologous expression systems of human sulfite oxidase and Rhodobacter sphaeroides dimethylsulfoxide reductase in E. coli to study the incorporation of different metal ions into the molybdopterin site of these enzymes. From the added metal-containing compounds Na(2)MoO(4), Na(2)WO(4), NaVO(3), Cu(NO(3))(2), CdSO(4) and NaAsO(2) during the growth of E. coli, only molybdate and tungstate were specifically inserted into sulfite oxidase and dimethylsulfoxide reductase. Other metals, such as copper, cadmium and arsenite, were nonspecifically inserted into sulfite oxidase, but not into dimethylsulfoxide reductase. We showed that metal insertion into molybdopterin occurs beyond the step of molybdopterin synthase and is independent of MoeA and MogA proteins. Our study shows that the activity of molybdoenzymes, such as sulfite oxidase, is inhibited by high concentrations of heavy metals in the cell, which will help to further the understanding of metal toxicity in E. coli.     

Synthesis and reactivity studies of model complexes for molybdopterin-dependent enzymes

The molybdenum cofactor (Moco)-containing enzymes are divided into three classes that are named after prototypical members of each family, viz. sulfite oxidase, DMSO reductase and xanthine oxidase. Functional or structural models have been prepared for these three prototypical enzymes: (i) The complex [MoO2(mnt)2]2- (mnt2- = 1,2-dicyanoethylenedithiolate) has been found to be able to oxidize hydrogen sulfite to HSO4- and is thus a functional model of sulfite oxidase. Kinetic and computational studies indicate that the reaction proceeds via attack of the substrate at one of the oxo ligands of the complex, rather than at the metal. (ii) The coordination geometries of the mono-oxo [Mo(VI)(O-Ser)(S2)2] entity (S2 = dithiolene moiety of molybdopterin) found in the crystal structure of R. sphaeroides DMSO reductase and the corresponding des-oxo Mo(IV) unit have been reproduced in the complexes [M(VI)O(OSiR3)(bdt)2] and [M(VI)O(OSiR3)(bdt)2] (M = Mo,W; bdt = benzene dithiolate). (iii) A facile route has been developed for the preparation of complexes containing a cis-Mo(VI)OS molybdenum oxo, sulfido moiety similar to that detected in the oxidized form of xanthine oxidase.     

Structural studies of molybdopterin synthase provide insights into its catalytic mechanism

Molybdenum cofactor biosynthesis is an evolutionarily conserved pathway present in eubacteria, archaea, and eukaryotes, including humans. Genetic deficiencies of enzymes involved in cofactor biosynthesis in humans lead to a severe and usually fatal disease. The molybdenum cofactor contains a tricyclic pyranopterin, termed molybdopterin, that bears the cis-dithiolene group responsible for molybdenum ligation. The dithiolene group of molybdopterin is generated by molybdopterin synthase, which consists of a large (MoaE) and small (MoaD) subunit. The crystal structure of molybdopterin synthase revealed a heterotetrameric enzyme in which the C terminus of each MoaD subunit is deeply inserted into a MoaE subunit to form the active site. In the activated form of the enzyme, the MoaD C terminus is present as a thiocarboxylate. The present study identified the position of the thiocarboxylate sulfur by exploiting the anomalous signal originating from the sulfur atom. The structure of molybdopterin synthase in a novel crystal form revealed a binding pocket for the terminal phosphate of molybdopterin, the product of the enzyme, and suggested a binding site for the pterin moiety present in precursor Z and molybdopterin. Finally, the crystal structure of the MoaE homodimer provides insights into the conformational changes accompanying binding of the MoaD subunit.     

Molybdenum active centre of DMSO reductase from Rhodobacter capsulatus: crystal structure of the oxidised enzyme at 1.82-Å resolution and the dithionite-reduced enzyme at 2.8-Å resolution

The 1.82-Å X-ray crystal structure of the oxidised (Mo^(VI)) form of the enzyme dimethylsulfoxide reductase (DMSOR) isolated from Rhodobacter capsulatus is presented. The structure has been determined by building a partial model into a multiple isomorphous replacement map and fitting the crystal structure of DMSOR from Rhodobacter sphaeroides to the partial model. The enzyme structure has been refined, at 1.82-Å resolution, to an R factor of 14.8% (R _free?=?18.4%). The molybdenum is coordinated by seven ligands: four dithiolene sulfurs, Oγ of Ser147 and two oxo groups. The four sulfur ligands, at a metal-sulfur distance of 2.4?Å or 2.5?Å, are contributed by the two molybdopterin guanine dinucleotide (MGD) cofactors. The coordination sphere of the molybdenum is different from that in previously reported structures of DMSOR from R. sphaeroides and R. capsulatus. The 2.8-Å structure of DMSOR, reduced by addition of sodium dithionite, is also described and differs from the structure of the oxidised enzyme by the removal of a single oxo ligand from the molybdenum coordination sphere. A structure, at 2.5-Å resolution, has also been obtained from crystals soaked in mother liquor buffered at pH?7.0. No differences are observed in the structure at pH?7 when compared with the native crystal structure at pH?5.5.     

Which functional groups of the molybdopterin ligand should be considered when modeling the active sites of the molybdenum and tungsten cofactors? A density functional theory study

A density functional theory study of the influence of the various functional groups of the molybdopterin ligand on electronic and geometric properties of active-site models for the molybdenum and tungsten cofactors has been undertaken. We used analogous molybdenum and tungsten complexes with increasingly accurate representation of the molybdopterin ligands and compared bond lengths, angles, charge distribution, composition of the binding orbitals, as well as the redox potentials in relation to each other. On the basis of our findings, we suggest using ligand systems including the pyrane and the pyrazine rings, besides the dithiolene function, to obtain sufficiently reliable computational, but also synthetic, models for the molybdenum and tungsten cofactors, whereas the second ring of the pterin might be neglected for efficiency reasons.     

Periplasmic nitrate reductase revisited: a sulfur atom completes the sixth coordination of the catalytic molybdenum

Nitrate reductase from Desulfovibrio desulfuricans ATCC 27774 (DdNapA) is a monomeric protein of 80 kDa harboring a bis(molybdopterin guanine dinucleotide) active site and a [4Fe-4S] cluster. Previous electron paramagnetic resonance (EPR) studies in both catalytic and inhibiting conditions showed that the molybdenum center has high coordination flexibility when reacted with reducing agents, substrates or inhibitors. As-prepared DdNapA samples, as well as those reacted with substrates and inhibitors, were crystallized and the corresponding structures were solved at resolutions ranging from 1.99 to 2.45 A. The good quality of the diffraction data allowed us to perform a detailed structural study of the active site and, on that basis, the sixth molybdenum ligand, originally proposed to be an OH/OH(2) ligand, was assigned as a sulfur atom after refinement and analysis of the B factors of all the structures. This unexpected result was confirmed by a single-wavelength anomalous diffraction experiment below the iron edge (lambda = 1.77 A) of the as-purified enzyme. Furthermore, for six of the seven datasets, the S-S distance between the sulfur ligand and the Sgamma atom of the molybdenum ligand Cys(A140) was substantially shorter than the van der Waals contact distance and varies between 2.2 and 2.85 A, indicating a partial disulfide bond. Preliminary EPR studies under catalytic conditions showed an EPR signal designated as a turnover signal (g values 1.999, 1.990, 1.982) showing hyperfine structure originating from a nucleus of unknown nature. Spectropotentiometric studies show that reduced methyl viologen, the electron donor used in the catalytic reaction, does not interact directly with the redox cofactors. The turnover signal can be obtained only in the presence of the reaction substrates. With use of the optimized conditions determined by spectropotentiometric titration, the turnover signal was developed with (15)N-labeled nitrate and in D(2)O-exchanged DdNapA samples. These studies indicate that this signal is not associated with a Mo(V)-nitrate adduct and that the hyperfine structure originates from two equivalent solvent-exchangeable protons. The new coordination sphere of molybdenum proposed on the basis of our studies led us to revise the currently accepted reaction mechanism for periplasmic nitrate reductases. Proposals for a new mechanism are discussed taking into account a molybdenum and ligand-based redox chemistry, rather than the currently accepted redox chemistry based solely on the molybdenum atom.     

In vitro molybdenum ligation to molybdopterin using purified components

We have previously shown that Escherichia coli MoeA and MogA are required in vivo for the final step of molybdenum cofactor biosynthesis, the addition of the molybdenum atom to the dithiolene of molybdopterin. MoeA was also shown to facilitate the addition of molybdenum in an assay using crude extracts from E. coli moeA(-) cells. The experiments detailed in this report utilized an in vitro assay for MoeA-mediated molybdenum ligation to de novo synthesized molybdopterin using only purified components and monitoring the reconstitution of human aposulfite oxidase. In this assay, maximum activation was achieved by delaying the addition of aposulfite oxidase to allow for adequate molybdenum coordination to occur. Tungsten, which substitutes for molybdenum in hyperthermophilic organisms, could also be ligated to molybdopterin using this system, though not as efficiently as molybdenum. Addition of thiol compounds to the assay inhibited activity. Addition of MogA also inhibited the reaction. However, in the presence of ATP and magnesium, addition of MogA to the assay increased the level of aposulfite oxidase reconstitution beyond that observed with MoeA alone. This effect was not observed in the absence of MoeA. The results presented here demonstrate that MoeA is responsible for mediating molybdenum ligation to molybdopterin, whereas MogA stimulates this activity in an ATP-dependent manner.     

The critical role of tryptophan-116 in the catalytic cycle of dimethylsulfoxide reductase from Rhodobacter capsulatus

In dimethylsulfoxide reductase of Rhodobacter capsulatus tryptophan-116 forms a hydrogen bond with a single oxo ligand bound to the molybdenum ion. Mutation of this residue to phenylalanine affected the UV/visible spectrum of the purified Mo(VI) form of dimethylsulfoxide reductase resulting in the loss of the characteristic transition at 720 nm. Results of steady-state kinetic analysis and electrochemical studies suggest that tryptophan 116 plays a critical role in stabilizing the hexacoordinate monooxo Mo(VI) form of the enzyme and prevents the formation of a dioxo pentacoordinate Mo(VI) species, generated as a consequence of the dissociation of one of the dithiolene ligands of the molybdopterin cofactor from the Mo ion.     

Resonance Raman as a direct probe for the catalytic mechanism of molybdenum oxotransferases

 Recent studies of human sulfite oxidase and Rhodobacter sphaeroides DMSO reductase have demonstrated the ability of resonance Raman to probe in detail the coordination environment of the Mo active sites in oxotransferases via Mo=O, Mo-S(dithiolene), Mo-S(Cys) or Mo-O(Ser), dithiolene chelate ring and bound substrate vibrations. Furthermore, the ability to monitor the catalytically exchangeable oxo group via isotopic labeling affords direct mechanistic information and structures for the catalytically competent Mo(IV) and Mo(VI) species. The results clearly demonstrate that sulfite oxidase cycles between cis–di-oxo-Mo(VI) and mono-oxo-Mo(IV) states during catalytic turnover, whereas DMSO reductase cycles between mono-oxo-Mo(VI) and des-oxo-Mo(IV) states. In the case of DMSO reductase, ¹⁸O-labeling experiments have provided the first direct evidence for an oxygen atom transfer mechanism involving an Mo=O species. Of particular importance is that the active-site structures and detailed mechanism of DMSO reductase in solution, as determined by resonance Raman spectroscopy, are quite different to those reported or deduced in the three X-ray crystallographic studies of DMSO reductases from Rhodobacter species. Received: 16 June 1997 / Accepted: 20 August 1997     

Molybdenum cofactor biosynthesis in Escherichia coli. Requirement of the chlB gene product for the formation of molybdopterin guanine dinucleotide.

The chlorate-resistant mutants of Escherichia coli are affected in the biosynthesis of the molybdenum cofactor and show pleiotropic loss of the activities of those enzymes which require the cofactor. The molybdenum cofactor in all molybdoenzymes other than nitrogenase is a complex of the metal with a unique pterin termed molybdopterin. The molybdenum cofactor in a number of E. coli enzymes has been shown to contain GMP in addition to the metal-molybdopterin complex, with the GMP appended in pyrophosphate linkage to the terminal phosphate ester on the molybdopterin side chain. In this paper, we have examined the biochemistry of the chlB mutant and show that the gene product of the chlB locus is essential for the addition of the GMP moiety to form molybdopterin guanine dinucleotide, a step which occurs late in the cofactor biosynthetic pathway in E. coli. Sensitive techniques were developed for the identification of fluorescent derivatives of molybdopterin and of molybdopterin guanine dinucleotide in extracts of E. coli cells. Wild type cells were shown to contain both molybdopterin and molybdopterin guanine dinucleotide, while cells of chlB mutants were found to contain elevated levels of molybdopterin but no detectable molybdopterin guanine dinucleotide.     

Escherichia coli MoeA and MogA. Function in metal incorporation step of molybdenum cofactor biosynthesis

Escherichia coli MoeA and MogA are required for molybdenum cofactor biosynthesis and are believed to function in the addition of molybdenum to the dithiolene of molybdopterin to form molybdenum cofactor. Here we show that moeA(-) and mogA(-) cells are able to synthesize molybdopterin, but both are deficient in molybdenum incorporation and, as a consequence, are deficient in the formation of molybdopterin-guanine dinucleotide. Human sulfite oxidase expressed in E. coli moeA(-) could be activated in vitro in the presence of MoeA and low concentrations of molybdate. Sulfite oxidase purified from the moeA(-) lysate was also activated, although to a lesser extent than observed in the presence of lysate. MogA was incapable of activating sulfite oxidase expressed in E. coli mogA(-). These results demonstrate that molybdenum insertion into molybdopterin is required for molybdopterin-guanine dinucleotide formation, and that MoeA facilitates molybdenum incorporation at low levels of molybdate, but MogA has an alternative function, possibly as a carrier for molybdopterin during molybdenum incorporation.     

Insights into the respiratory electron transfer pathway from the structure of nitrate reductase A

The facultative anaerobe Escherichia coli is able to assemble specific respiratory chains by synthesis of appropriate dehydrogenases and reductases in response to the availability of specific substrates. Under anaerobic conditions in the presence of nitrate, E. coli synthesizes the cytoplasmic membrane-bound quinol-nitrate oxidoreductase (nitrate reductase A; NarGHI), which reduces nitrate to nitrite and forms part of a redox loop generating a proton-motive force. We present here the crystal structure of NarGHI at a resolution of 1.9 A. The NarGHI structure identifies the number, coordination scheme and environment of the redox-active prosthetic groups, a unique coordination of the molybdenum atom, the first structural evidence for the role of an open bicyclic form of the molybdo-bis(molybdopterin guanine dinucleotide) (Mo-bisMGD) cofactor in the catalytic mechanism and a novel fold of the membrane anchor subunit. Our findings provide fundamental molecular details for understanding the mechanism of proton-motive force generation by a redox loop.     

Identification of a Bis-molybdopterin Intermediate in Molybdenum Cofactor Biosynthesis in Escherichia coli

The molybdenum cofactor is an important cofactor, and its biosynthesis is essential for many organisms, including humans. Its basic form comprises a single molybdopterin (MPT) unit, which binds a molybdenum ion bearing three oxygen ligands via a dithiolene function, thus forming Mo-MPT. In bacteria, this form is modified to form the bis-MPT guanine dinucleotide cofactor with two MPT units coordinated at one molybdenum atom, which additionally contains GMPs bound to the terminal phosphate group of the MPTs (bis-MGD). The MobA protein catalyzes the nucleotide addition to MPT, but the mechanism of the biosynthesis of the bis-MGD cofactor has remained enigmatic. We have established an in vitro system for studying bis-MGD assembly using purified compounds. Quantification of the MPT/molybdenum and molybdenum/phosphorus ratios, time-dependent assays for MPT and MGD detection, and determination of the numbers and lengths of Mo–S and Mo–O bonds by X-ray absorption spectroscopy enabled identification of a novel bis-Mo-MPT intermediate on MobA prior to nucleotide attachment. The addition of Mg-GTP to MobA loaded with bis-Mo-MPT resulted in formation and release of the final bis-MGD product. This cofactor was fully functional and reconstituted the catalytic activity of apo-TMAO reductase (TorA). We propose a reaction sequence for bis-MGD formation, which involves 1) the formation of bis-Mo-MPT, 2) the addition of two GMP units to form bis-MGD on MobA, and 3) the release and transfer of the mature cofactor to the target protein TorA, in a reaction that is supported by the specific chaperone TorD, resulting in an active molybdoenzyme.     

The biosynthesis of the molybdenum cofactors in Escherichia coli

The biosynthesis of the molybdenum cofactor (Moco) is highly conserved among all kingdoms of life. In all molybdoenzymes containing Moco, the molybdenum atom is coordinated to a dithiolene group present in the pterin-based 6-alkyl side chain of molybdopterin (MPT). In general, the biosynthesis of Moco can be divided into four steps in in bacteria: (i) the starting point is the formation of the cyclic pyranopterin monophosphate (cPMP) from 5′-GTP, (ii) in the second step the two sulfur atoms are inserted into cPMP leading to the formation of MPT, (iii) in the third step the molybdenum atom is inserted into MPT to form Moco and (iv) in the fourth step bis-Mo-MPT is formed and an additional modification of Moco is possible with the attachment of a nucleotide (CMP or GMP) to the phosphate group of MPT, forming the dinucleotide variants of Moco. This review presents an update on the well-characterized Moco biosynthesis in the model organism Escherichia coli including novel discoveries from the recent years.     

Crystal structure of a molybdopterin synthase-precursor Z complex: insight into its sulfur transfer mechanism and its role in molybdenum cofactor deficiency

In almost all biological life forms, molybdenum and tungsten are coordinated by molybdopterin (MPT), a tricyclic pyranopterin containing a cis-dithiolene group. Together, the metal and the pterin moiety form the redox reactive molybdenum cofactor (Moco). Mutations in patients with deficiencies in Moco biosynthesis usually occur in the enzymes catalyzing the first and second steps of biosynthesis, leading to the formation of precursor Z and MPT, respectively. The second step is catalyzed by the heterotetrameric MPT synthase protein consisting of two large (MoaE) and two small (MoaD) subunits with the MoaD subunits located at opposite ends of a central MoaE dimer. Previous studies have determined that the conversion of the sulfur- and metal-free precursor Z to MPT by MPT synthase involves the transfer of sulfur atoms from a C-terminal MoaD thiocarboxylate to the C-1' and C-2' positions of precursor Z. Here, we present the crystal structures of non-thiocarboxylated MPT synthase from Staphylococcus aureus in its apo form and in complex with precursor Z. A comparison of the two structures reveals conformational changes in a loop that participates in interactions with precursor Z. In the complex, precursor Z is bound by strictly conserved residues in a pocket at the MoaE dimer interface in close proximity of the C-terminal glycine of MoaD. Biochemical evidence indicates that the first dithiolene sulfur is added at the C-2' position.     

Tungstate can substitute for molybdate in sustaining growth of Methanobacterium thermoautotrophicum

Methanobacterium thermoautotrophicum (strain Marburg) was found to grow on media supplemented with tungstate rather than with molybdate. The Archaeon then synthesized a tungsten iron-sulfur isoenzyme of formylmethanofuran dehydrogenase. The isoenzyme was purified to apparent homogeneity and shown to be composed of four different subunits of apparent molecular masses 65 kDa, 53 kDa, 31 kDa, and 15 kDa and to contain per mol 0.4 mol tungsten, <0.05 mol molybdenum, 8 mol non-heme iron, 8 mol acid-labile sulfur and molybdopterin guanine dinucleotide. Its molecular and catalytic properties were significantly different from those of the molybdenum isoenzyme characterized previously. The two isoenzymes also differed in their metal specificity: the active molybdenum isoenzyme was only synthesized when molybdenum was available during growth whereas the active tungsten isoenzyme was also generated during growth of the cells on molybdate medium. Under the latter conditions the tungsten isoenzyme was synthesized containing molybdenum rather than tungsten.Abbreviations MFR methanofuran - CHO-MFR N-formylmethanofuran - MGD molybdopterin guanine dinucleotide - MAD molybdopterin adenine dinucleotide - MHD molybdopterin hypoxanthine dinucleotide - FPLC fast protein liquid chromatography - SDS/PAGE sodium dodecylsulfate/polyacrylamide gel electrophoresis - ICP-MS inductively coupled plasma mass spectrometry