Occurrence of insertion sequence (IS) regions on plasmid deoxyribonucleic acid as direct and inverted nucleotide sequence duplications.

Insertion sequence (IS) regions have been identified previously as a cause of strongly polar mutations in Escherichia coli and several bacteriophages. The present experiments indicate that genetically characterized IS regions occur on bacterial plasmid deoxyribonucleic acid (DNA) as both direct and inverted DNA sequence duplications. The DNA insertion which has been shown previously (Sharp et al., 1973) to control expression of tetracycline resistance in the R6-5 plasmid, and which occurs as directly and inversely repeated DNA sequences adjacent to the region believed to contain the tetracycline resistance gene, has been identified as IS3. A second genetically characterized insertion sequence (IS1) has been identified as a direct DNA duplication occurring at both junctions of the resistance transfer factor and R-determinant components of R6-5 and related plasmids. A model is presented for the reversible dissociation of resistance transfer factor and R-determinant components of co-integrate R plasmids at the sites of DNA sequence homology provided by the repeated IS regions.     

Heteroduplex mapping of small plasmids derived from R-factor R12: in vivo recombination occurs at IS1 insertion sequences.

Small, autonomously replicating plasmids derived by in vivo recombination from R-factor R12 (= R100) have been structurally mapped by heteroduplex formation between the plasmids and an R-factor which is structurally closely related to R6-5. Recombination resulting in generation of the small resistance-free plasmids occurs between the (IS1)b insertion sequence and various other sites on the opposite side of an origin of replication. A larger R12-derived plasmid pSM17, carrying streptomycin (Sm), sulfadiazole (Sa), and chloramphenicol (Cm) resistances, has recombined in a similar manner but at the (IS1)a sequence. A new structural coordinate origin for R100 and for partially homologous R-factors is proposed based upon the location of the (IS1)b sequence.     

alphabeta sequence of F is IS31.

Previous studies have shown that there is a deoxyribonucleic acid (DNA) segment, of length 1.3 kb and denoted as the alphabeta sequence, which occurs twice on the F plasmid at corrdinates 93.2 to 94.5/OF kb and 13.7 to 15.0F kb. In the present investigation, heteroduplexes were prepared between a phage DNA carrying the insertion sequence IS3 and suitable F-prime DNAs. The hybrids formed show that IS3 is the same as alphabeta. This result plus previous studies support the view that: (i) the insertion sequence IS2 and IS3 occur on F and, in multiple copies, on the main bacterial chromosome of Escherichia coli K-12; and (ii)these IS sequences on the main bacterial chromosomes are hot spots for Hfr formation by reciprocal recombination with the corresponding sequences of F.     

Adjacent insertion sequences IS2 and IS5 in bacteriophage Mu mutants and an IS5 in a lambda darg bacteriophage

Using electron microscopic heteroduplex analysis, we have demonstrated that an insertion found in a Mu prophage and in some infectious. Mu deletion-substitution mutants derived from it consists of bacterial insertion sequence IS2 linked directly to IS5. Other infectious Mu mutants derived from the same lysogen have only IS5 or a portion of IS2. In addition, we have found that an independent insertion in a transducing phage, lambda 13 dargB2, is IS5. The ends of IS5 are short, inverted duplications of each other. These observations support the notion that the DNA insertion previously designated IS5 on the basis of a single example in lambda KH100 is a bona fide bacterial insertion sequence.     

Repressor gene finO in plasmids R100 and F: constitutive transfer of plasmid F is caused by insertion of IS3 into F finO.

Fertility factor F confers bacterial conjugation, a process which involves at least 20 tra genes. Resistance plasmids such as R100, R6-5, and R1 have homology with F in the tra region. Conjugal transfer of these plasmids is, however, repressed, while transfer of F is constitutive. Repression of R transfer is due to the existence of the two genes, called finO and finP; constitutive transfer of F is believed to be due to a lack of finO in F. In this paper, we report the identification and DNA sequence of the finO gene of R100, encoding a protein of 21,265 daltons. We show that F does actually encode finO, but the gene has been inactivated by insertion of IS3. Lederberg and Tatum (Nature [London] 158:558, 1946), who discovered sexuality in bacteria, may have had an Escherichia coli K-12 strain harboring such an finO F factor, which facilitated the generation of recombinant progeny useful for genetic analysis of bacteria and established the foundation for molecular genetics.     

Characterization of IS46, an insertion sequence found on two IncN plasmids.

The IncN plasmids R46 and N3 each contain two copies of an insertion sequence which we denote IS46. This insertion sequence has single PstI and SalI restriction sites and is 0.81 kilobases long. All four copies of IS46 were capable of forming cointegrates, although the DNA between the insertion sequences, which in each case carries a tetracycline resistance gene, was not transposable in the form of a compound transposon. IS46-mediated cointegrates resolved in Rec+ but not in RecA- cells. Recombination between two copies of IS46, causing an inversion, accounts for the existence of two distinct forms of R46. IS46-mediated deletions were probably responsible for the formation of the plasmid pKM101 from R46. IS46 was not homologous to IS1 but did show homology with IS15.     

Sequence and conservation of genes at the distal end of the transfer region on plasmids F and R6-5

The nucleotide sequence of the region downstream of transfer gene traI, including fertility inhibition gene finO, on the conjugative plasmids F and R6-5, has been determined. Analysis of the F sequence revealed two open reading frames (ORF's), ORF248 and ORF186; ORF186 (finO) is interrupted by the insertion of IS3. The R6-5 sequence also contained ORF248 and an intact ORF186, although an additional ORF (ORF286) was located between the two genes. ORF248, which we have designated traX, and ORF186 (finO) are highly conserved on both plasmids. The organisation of these genes indicates that traI and traX on F, and traI, traX and ORF286 on R6-5 are co-transcribed from their respective promoters upstream of traI. Sequences homologous to traX were detected on a range of conjugative F-like plasmids, whereas sequences homologous to ORF286 were only found on plasmids R6-5, R100 and R1. The conservation of traX sequences suggests a functional importance for that gene and/or its product.     

IS50-mediated inverse transposition: specificity and precision

The IS50 elements, which are present as inverted repeats in the kanamycin-resistance transposon, Tn5, can move in unison carrying with them any interstitial DNA segment. In consequence, DNA molecules such as a lambda::Tn5 phage genome are composed of two overlapping transposons - the kan segment bracketed by IS50 elements (Tn5), and lambda bracketed by IS50 elements. During direct transposition, mediated by IS50 "O" (outside) ends, the kan gene is moved and the lambda vector is left behind. During inverse transposition, mediated by the "I" (inside) ends of the IS50 elements, the lambda vector segment is moved and the kan gene is left behind. Direct transposition is several orders of magnitude more frequent than inverse transposition (Isberg and Syvanen, 1981; Sasakawa and Berg, 1982). We assessed the specificity and precision of the rare events mediated by pairs of I ends by mapping and sequencing independent inverse transpositions from a lambda::Tn5 phage into the amp and tet genes of plasmid pBR322. Using restriction analyses, 32 and 40 distinct sites of insertion were found among 46 and 72 independent inverse transpositions into the amp and tet genes, respectively. Eleven sites were used in two or more insertion events, and the two sites in tet used most frequently corresponded to major hotspots for the insertion of the Tn5 (by direct transposition). The sequences of 22 sites of inverse transposition (including each of the sites used more than once) were determined, in eleven cases by analyzing both pBR322-IS50 junctions, and in eleven others by sequencing one junction. The sequence of the "I" end of IS50 was preserved and 9-bp target sequence duplications were present in every case analyzed. GC pairs were found at each end of the target sequence duplication in ten of the eleven sites used more than once, and also in seven of the other eleven sites. Our data indicate that transposition mediated by pairs of "I" ends is similar in its specificity and precision to the more frequent transposition mediated by IS50 "O" ends.     

Electron microscope heteroduplex studies of sequence relations among plasmids of Escherichia coli: II. Structure of drug resistance (R) factors and f factors

The colicinogenic plasmid Col V-K94 and the class of transferable drug-resistance factors that inhibit fertility of the sex factor, F, are believed to be genetically similar to F. Heteroduplexes between these various F-like plasmids were studied by electron microscopy in order to identify and define the DNA segments that contain genes coding for fertility and other common functions. It was found that approximately 44% of the F factor is homologous to several different fi⁺ R factors and to Col V-K94, and that all of the homology between these plasmids and F is restricted to a region comprising only one-half of the F-factor molecule. These data, and previously reported electron microscope mapping of deletions of F factors, suggest that the genes active in the process of transfer are contained in one-half of the F factor, and therefore imply that the other half of F might not be required for expression of its fertility functions.DNA sequence homology among the R factors R6, R100 and R1 was also studied by heteroduplex formation. All of the DNA sequences contained in R100 were observed to be present in R6, and approximately 85% of the DNA sequences of R1 were included in R6. In the $\text{R1}\text{R6}$ heteroduplex, homology is distributed equally in the R-factor region homologous to the F factor, and the region containing antibiotic-resistance determinants (i.e. the segment deleted in the resistance transfer factor unit, RTF). The position of certain drugresistance determinants has been mapped by using various R-factor deletion mutants and correlating the pattern of drug resistance with the sequence homology observed among different R factors. Unlike the other resistance-determinant genes identified, the tetracycline marker has been mapped in the segment of R6 that is largely homologous to the F factor.Inverted repeats, which consist of DNA segments repeated in reverse sequence on the same single strand of DNA, were observed in R6, R100 and Col V-K94. One inverted repeat of R6 is located near the tetraeycline marker. Further duplication of one of the complementary sequences of the inverted repeat, and insertion of this duplication into the plasmid genome apparently inactivates the tetracycline-resistance determinant of R6.     

Characterization of insertion sequence IS946, an Iso-ISS1 element, isolated from the conjugative lactococcal plasmid pTR2030.

The self-transmissible plasmid pTR2030 mobilized nonconjugative heterologous cloning vectors pGK12 (Cmr Emr) and pSA3 (Emr) at frequencies of 10(-5) to 10(-6) per input donor. Transconjugants harbored a 51- or 58-kilobase (kb) plasmid not found in the parental strains that cotransferred at high frequency with Cmr Emr and pTR2030-encoded phage resistance (Hsp+) in second-round matings (10(-1) per input donor). Restriction endonuclease mapping and DNA-DNA hybridization identified the 51- to 58-kb plasmids as pTR2030::vector cointegrates. Examination of four cointegrates indicated that pGK12 and pSA3 had inserted within two locations on pTR2030. Resolution of the cointegrates generated vector derivatives containing a 0.8-kb insert of pTR2030 DNA. Restriction analyses of several resolution plasmids indicated that the 0.8-kb element had inserted into various positions within pGK12 and pSA3 and in certain cases had inactivated the Cmr or Emr marker of pGK12. A conjugative mobilization assay demonstrated that the 0.8-kb element, designated IS946, mediated transpositional recombination. Nucleotide sequence determination identified IS946 as an 808-base-pair (bp) insertion sequence sharing ca. 96% homology with lactococcal insertion sequence ISS1. IS946 differed by 27 and 31 bp from ISS1S and ISS1T, respectively, and in 2 of 226 amino acids in the deduced sequence of the putative transposase. IS946 has perfect 18-bp terminal inverted repeats, identical to ISS1, and similarly generated 8-bp direct repeats of the target site upon insertion.     

A cloned immunoglobulin cDNA fragment enhances transposition of IS elements into recombinant plasmids.

Evidence is presented indicating that a novel DNA sequence arrangement generated by in vitro recombination may elicit high frequency transpositions of IS elements. A 109 bp Bam HI fragment of the cDNA for the immunoglobulin kappa light chain from MOPC 321 myeloma was cloned into the Bam HI site of pBR313. The cloned fragment extends from the codon for Gly 57 to the V-J junction. Insertions of IS1 or IS5 were identified in 6 of 50 plasmid DNAs isolated from freshly transformed clones. Additional transposition events were detected after subculturing for several growth cycles. Three independent insertions of IS1 occurred in the promoter region of the TcR operon. All IS5 and the remaining IS1 insertions were located in the TcR region upstream to the cloned DNA sequence. Sequences homologous to the ends of IS1, or corresponding to the consensus sequence at the target site of IS5 are present near the estimated sites of insertion of IS1 or IS5 respectively. Bacteria harboring recombinant plasmids carrying the cloned DNA in either orientation grew at a reduced rate relative to cells harboring pBR313, suggesting that fused gene products made from the two types of plasmid were inhibitory to cell growth. IS insertions, which relieved this inhibitory effect and thereby provided a selective advantage, were found exclusively in plasmids carrying the cloned DNA in only one of the two orientations. The fact that IS elements were not observed in the other type of recombinant plasmid indicates that selective pressure alone is not sufficient to account for the frequent IS insertions observed and that sequences at a distance from the site of IS insertion may be critical in the regulation of transposition frequency.     

A novel type of transposon generated by insertion element Is102 present in a psc101 derivative

We describe a novel type of transposon in the tetracycline resistance plasmid pYM103, a derivative of pSC101 carrying a single copy of an insertion element IS102. The new transposons we found were identified as DNA segments, approximately 6 kb (Tn1021) and 10 kb (Tn1022) in length, able to mediate the cointegration of pYM1O3 with plasmid Col E1. The resulting cointegrate contains either of these pYM1O3 segments duplicated in a direct orientation at the junctions of the parent plasmids. A direct duplication of a 9 bp sequence at the target site in Col E1 is found at the junctions for cointegration. Both transposons have IS1O2 at one end and also contain different lengths of the pYM103 DNA adjacent to IS102, including the tetracycline resistance gene. Each transposon contains terminal inverted repeats of a short nucleotide sequence. These results and the fact that IS102 can itself mediate plasmid cointegration, giving rise to a duplication of a 9 bp target sequence, indicate that IS102 is responsible for generation of Tn1021 and Tn1022. They are quite different from the common IS-associated transposons, which are always flanked by two copies of an IS element, and may be similar to transposons such as those of the Tn3 family and phage Mu.     

An IS4 transposition causes a 13-bp duplication of phage lambda DNA and results in the constitutive expression of the cI and cro gene products

We have examined the nature of the additional DNA present in lambda hyp- mutants (Eisen et al., 1982). This DNA is an IS4 element in orientation I, in the y region of bacteriophage lambda at nucleotide position 39,139 (see Moore et al., 1979). Our assignment is based on (i) the similarity in size derived from the PstI, AvaI, and HindII restriction pattern and (ii) the DNA sequence of both the left and right lambda-IS4 DNA junctions in phage lambda hyp15rev4. The IS4 integration event resulted in the duplication of 13 bp of lambda DNA in contrast to the 11- and 12-bp duplications previously observed at the sites of IS4 integrations elsewhere (Klaer et al., 1981).     

Characterization and sequence analysis of pilin from F-like plasmids.

Conjugative pili are expressed by derepressed plasmids and initiate cell-to-cell contact during bacterial conjugation. They are also the site of attachment for pilus-specific phages (f1, f2, and QB). In this study, the number of pili per cell and their ability to retract in the presence of cyanide was estimated for 13 derepressed plasmids. Selected pilus types were further characterized for reactivity with anti-F and anti-ColB2 pilus antisera as well as two F pilus-specific monoclonal antibodies, one of which is specific for a sequence common to most F-like pilin types (JEL92) and one which is specific for the amino terminus of F pilin (JEL93). The pilin genes from eight of these plasmids were cloned and sequenced, and the results were compared with information on F, ColB2, and pED208 pilin. Six pilus groups were defined: I, was F-like [F, pED202(R386), ColV2-K94, and ColVBtrp]; IIA was ColB2-like in sequence but had a lowered sensitivity to f1 phage due to its decreased ability for pilus retraction [pED236(ColB2) and pED203(ColB4)]; IIB was ColB2-like but retained f1 sensitivity [pED200(R124) and pED207(R538-1)]; III contained R1-19, which had a ColB2-like amino terminus but had an additional lysine residue at its carboxy terminus which may affect its phage sensitivity pattern and its antigenicity; IV was R100-1-like [R100-1 and presumably pED241(R136) and pED204(R6)] which had a unique amino-terminal sequence combined with a carboxy terminus similar to that of F. pED208(Folac) formed group V, which was multipiliated and exhibited poor pilus retraction although it retained full sensitivity to f1 phage. The pED208 pilin gene could not be cloned at this time since it shared no homology with the pilin gene of the F plasmid.     

Insertion element IS102 resides in plasmid pSC101.

In vivo recombination was found to occur between plasmid pHS1, a temperature-sensitive replication mutant of pSC101 carrying tetracycline resistance, and plasmid ColE1 after selection for tetracycline resistance at the restrictive temperature, 42 degrees C. Extensive analysis of the physical structures of three of these recombinant plasmids, using restriction endonucleases and the electron microscope heteroduplex method, revealed that the plasmid pHS1 was integrated into different sites on ColE1. The recombinant plasmids contained a duplication of a unique 1-kilobase (kb) sequence of pHS1 in a direct orientation at the junctions between the two parental plasmid sequences. This was confirmed by comparing the nucleotide sequence of the recombinants and their parental plasmids. Nucleotide sequence analysis further revealed that nine nucleotides at the site of recombination of ColE1 were duplicated at the junction of each of the 1-kb sequences. The formation of recombinants was independent of RecA function. Based on our previous finding that a plasmid containing a deoxyribonucleic acid insertion (IS) element can recombine with a second plasmid to generate a duplication of the IS element, we conclude that the 1-kb sequence is an insertion sequence, which we named IS102. For convenience, we have also denoted the IS102 sequence as eta theta to assign the orientation of the sequence. Eighteen nucleotides at one end (eta end) were found to be repeated in an inverted orientation at the other end (theta end) of IS102. The nucleotide sequence of the eta end of the sequence was found to be identical to the sequence at the ends of the transposon Tn903, which is responsible for transposition of the kanamycin resistance gene.     

Heteroduplex electron microscopy of phage Mu mutants containing IS1 insertions and chloramphenicol resistance transposons.

We have examined by electron microscopy the DNA heteroduplexes of six bacteriophage Mu mutants, Mu X cam, generated by the insertion of the Tn9 transposon for chloramphenicol resistance. Tn9 was found to be 2.8 +/- 0.2 kilobases (kb) in length and to consist of a cam determinant flanked by two IS1 sequences arranged in a direct order. In two of the six Mu X cam mutants, the Tn9 insertion was at a fixed location, 3.9 kb from the left, or c, end. In the other four mutants, the position of the insertion varied, even though the lysogenic cultures induced were grown from single colonies. The insertion was located at either 3.3 kb, 3.9 kb, or, less frequently, at 4.4 kb from the left end of the DNA. Furthermore, at low frequencies, the insertions were found to be in an orientation opposite to what predominated in the preparation. Thus, Tn9 in the Mu X cam mutants examined could appear to undergo rapid rearrangements during Mu growth or over a few generations of cell growth. One of the Tn9 insertion sites was apparently the same as that for a 0.8 kb insertion found in a Mu X mutant. This latter insertion was identified as an IS1 sequence. The DNA molecules from all the Mu X cam mutant phage particles were found to be missing the bacterial DNA at the S (right) end, along with a variable amount of the adjoining Mu DNA in the beta region. This observation supports the headful packaging model for Mu DNA.     

Unidirectional replication in Escherichia coli of three small plasmids derived from R factor R12

Replicating molecules of three small plasmids, pSM1, pSM2, and pSM3, were isolated from a CsCl density gradient containing ethidium bromide. These plasmids are all derived from R12, a mutant of NR1 (same as R100). By means of pulse-labeling experiments, the replicating forms were located at buoyant densities intermediate between those of the closed circular and open circular DNA bands. These molecules were analyzed by electron microscopy following digestion with restriction endonucleases. Digestion of pSM2 with EcoR1 and with HindIII revealed the presence of a single origin of replication located 1.72 kilobases (kb) from the EcoR1 cutting site (2.04 kb from the HindIII cutting site). These experiments also demonstrated that replication occurs in a unidirectional mode from the origin. Analysis of EcoR1-cleaved replicating molecules of pSM1 and pSM3, which carry common sequences completely or partly homologous to pSM2, provides further evidence for the unidirectional replication of these plasmids from a common origin. The site of the origin of replication was fixed at 85.5 on the kilobase map of R100. This origin, which is located in the RTF region, probably corresponds to one of the replication origins of R100.     

Electron microscope heteroduplex studies of sequence relations among plasmids of Escherichia coli. V. ilv+ Deletion mutants of F14

The structure of a number of F′ilv episomes derived from F14 by bacteriophage P1-mediated transduction have been determined by the electron microscope heteroduplex method. F16, F25, F310 and F312 are all simple deletion mutants of F14. F316 is essentially the same but contains a small insertion (0.8 kilobase) of DNA of unknown origin within the F sequences at 78.6 F. The length of these plasmids are all about the same as that of phage P1 DNA itself. The sequences of F and the sequences of bacterial DNA that are present on the episomes are contiguous on the parental F14. Thus, their structures are consistent with the usual model for the mechanism of P1 transduction. The physical order of ilv genes is also consistent with previous genetic mapping. From this order one can determine the polarity of the Escherichia coli K12 chromosomal sequences on F14 and its F′ilv derivatives relative to the F sequences. This order is consistent with the known counterclockwise transfer order of the parental Hfr AB313. F′ilv episomes carry only one copy of the 2.8 to 8.5 F sequence, which is present as a direct duplication on F14. The F′ilv episomes are genetically stable, whereas F14 is unstable because of reciprocal recombination between the two duplicate sequences. The strain F316/AB2070 is different in several respects. All of the bacteria carry P1 phage DNA. As noted above, F316 itself carries a small insertion. Two transfer-defective deletion mutants, F316Δ(65.4-78.6) and F316Δ-(78.6-0.6) are also present in the population of F316/AB2070 cells. In each case, the deletion borders on one of the junctions of inserted DNA and F14 DNA in F316. Thus, these junctions appear to be hot spots for deletion formation.