Thermophilic lipase from Thermomyces lanuginosus: Gene cloning,expression and characterization

An extracellular lipase gene ln1 from thermophilic fungus Thermomyces lanuginosus HSAUP₀₃80006 was cloned through RT-PCR and RACE amplification. Its coding sequence predicted a 292 residues protein with a 17 amino acids signal peptide. The deduced amino acids showed 78.4% similarity to another lipase lgy from T. lanuginosus while shared low similarity with other fungi lipases. Higher frequencies hydrophobic amino acids related to lipase thermal stability, such as Ala, Val, Leu and Gly were observed in this lipase (named LN). The sequence, -Gly-His-Ser-Leu-Gly-, known as a lipase-specific consensus sequence of mould, was also found in LN. High level expression for recombinant lipase was achieved in Pichia pastoris GS115 under the control of strong AOX1 promoter. It was purified to homogeneity through only one step DEAE-Sepharose anion exchange chromatography and got activity of 1328 U/ml. The molecular mass of one single band of this lipase was estimated to be 33 kDa by SDS-PAGE. The enzyme was stable at 60 °C and kept 65% enzyme activity after 30 min incubation at 70 °C. It kept half-activity after incubated for 40 min at 80 °C. The optimum pH for enzyme activity was 9.0 and the lipase was stable from pH 8.0 to 12.0. Lipase activity was enhanced by Ca²⁺ and inhibited by Fe²⁺, Zn²⁺, K⁺, and Ag⁺. The cell-free enzyme hydrolyzed and synthesized esters efficiently, and the synthetic efficiency even reached 81.5%. The physicochemical and catalytic properties of the lipase are extensively investigated for its potential industrial applications.     

Production,purification and characterization of an extracellular lipase from Aureobasidium pullulans HN2.3 with potential application for the hydrolysis of edible oils

Lipase production (8.02 ± 0.24 U/ml) by the yeast Aureobasidium pullulans HN2.3 isolated from sea saltern was carried by using time-dependent induction strategy. The lipase in the supernatant of the yeast cell culture was purified to homogeneity with a 3.4-fold increase in specific lipase activity as compared to that in the supernatant by ammonium sulfate fractionation, gel filtration chromatography and anion-exchange chromatography. According to the data on SDS polyacrylamide gel electrophoresis, the molecular mass of the purified enzyme was estimated to be 63.5 kDa. The optimal pH and temperature of the purified enzyme were 8.5 and 35 °C, respectively. The enzyme was greatly inhibited by Hg²⁺, Fe²⁺ and Zn²⁺. The enzyme was strongly inhibited by phenylmethanesulphonyl fluoride, not inhibited by ethylene diamine tetraacetic acid (EDTA), but weakly inhibited by iodoacetic acid. It was found that the purified lipase had the highest hydrolytic activity towards peanut oil.     

A new thermostable and organic solvent-tolerant lipase from Aneurinibacillus thermoaerophilus strain HZ

A thermostable and organic solvent-tolerant lipase produced by Aneurinibacillus thermoaerophilus strain HZ was purified and characterised. The lipase was purified to apparent homogeneity with two steps: anion exchange chromatography on Q-Sepharose and gel filtration on Sephadex-G75. A final specific activity of 43.5 U/mg was obtained with an overall recovery of 19.7% and 15.6 purification fold. The molecular mass of the HZ lipase was estimated to be 50 kDa. The optimum pH for the activity of the purified HZ lipase was 7.0. The stability showed a broad range of pH values between pH 4.0 and 9.0 at 30 °C. The purified HZ lipase exhibited an optimum temperature of 65 °C with a half-life of 3 h and 10 min at 65 °C. The activity of the purified HZ lipase was stimulated in the presence of Ca²⁺. Organic solvents such as dimethyl sulfoxide (DMSO), methanol, n-tetradecane and n-hexadecane enhanced the lipase activity. Studies on the effect of oil showed that the lipase preferred natural oil, such as sunflower oil, over synthetic substrates.     

Purification,characterization and application of acidic lipase from Pseudomonas gessardii using beef tallow as a substrate for fats and oil hydrolysis

Beef tallow, a slaughter house waste was used as a substrate for lipase production, employing Pseudomonas gessardii. The strain, P. gessardii was isolated from the beef tallow acclimatized soil. The crude lipase activity at 139 U/ml by volume was obtained at optimized conditions of pH 5.0 and temperature of 37 °C. After purification, a 7.59-fold purity of lipase with specific activity of 1120 U/mg protein and molecular mass of 92 kDa was obtained. The purified lipase showed maximum activity and stability at pH 5.0 and 30 °C. Ca²⁺ had a stimulatory effect on the lipase activity compared to the other metal ions studied. The relative activity was enhanced with the addition of Triton X-100 with lower hydrophilic–lipophilic balance (HLB) value as 13.0 and DMSO with the lowest partition coefficient (log P) value, as 1.378. The amino acid composition and the functional groups of lipase were confirmed by HPLC and FT-IR spectroscopy. The purified lipase had the highest hydrolytic activity towards slaughterhouse wastes and vegetable oils. This work provides a potential biocatalyst for the wide applications in oleochemical and biotechnological industries.     

Novel minor lipase from Rhizopus chinensis during solid-state fermentation: Biochemical characterization and its esterification potential for ester synthesis

Rhizopus chinensis produces two lipases that catalyze ester synthesis when cultured under solid-state fermentation. The Lip2 was purified to homogeneity by ammonium sulphate precipitation, hydrophobic interaction chromatography and gel filtration chromatography. It has an apparent molecular weight of 33 kDa estimated from SDS–PAGE and 32 kDa calculated from analytical gel permeation, with synthetic activity and purification fold of 96.8 U/mg and 138.3, respectively. Maximum hydrolytic activity was obtained at pH 8.0–8.5 and 40 °C using pNPP as substrate. Slight activation of the enzyme was observed when Mn²⁺ is present. The enzyme was most active on p-nitrophenyl laurate (C12). The purified lipase exhibited maximum synthetic activity at pH memory of 6.0 and 30 ^oC. Most of ethyl esters synthesized by lyophilized enzyme achieved good yields (>90%), and caprylic acid served as the best acyl donor. The enzyme presented a particular affinity for ethanol, n-propanol and n-hexanol, with conversion of 92%, 93% and 92%, respectively, after 20 h incubation.     

Molecular cloning of a thermo-alkaliphilic lipase from Bacillus subtilis DR8806: Expression and biochemical characterization

A thermo-alkaliphilic lipase from Bacillus subtilis DR8806 was functionally expressed as an N-terminal 6xHis-tagged recombinant enzyme in Escherichia coli BL21 using pET-28a(+) expression vector. Sequence analysis revealed an open reading frame of 639 bp encoding a 212-amino acid protein containing the well-conserved Ala-His-Ser-Met-Gly motif. One-step purification of the His-tagged recombinant lipase was achieved using Ni-NTA affinity chromatography with a specific activity of 1364 U/mg. The purified enzyme with an apparent molecular mass of 26.8 kDa demonstrated the maximum activity at 70 °C and pH 8.0 for hydrolysis of p-nitrophenylbutyrate as substrate. The enzyme activity was strongly inhibited by divalent ions of heavy metals such as Hg²⁺ and Cu²⁺, while retained over 90% of the original activity in the presence of several reagents including DTNB (5,5′-dithiobis-(2-nitrobenzoic acid)), SDS (sodium dodecyl sulfate), urea, DMF (dimethylformamide), DTT (dithiothreitol), glycerol and Triton X-100. While being considerably stable in organic solvents, imidazolium-based ionic liquids (ILs) had stimulatory effects on the activity of purified lipase. Remarkable stabilization of enzyme at alkaline pH and in ionic liquids as well as its thermostability/thermoactivity are among the most fundamental characteristics which offer great potential for various biotechnological applications including detergent formulation, bioremediation processes and biotransformation in non-aqueous media.     

Purification and properties of enantioselective lipase from a newly isolated Bacillus cereus C71

A lipase from Bacillus cereus C71 was purified to homogeneity by ammonium sulfate precipitation, followed by Phenyl-Sepharose chromatography, DEAE ion exchange chromatography and CIM^® QA chromatography. This purification procedure resulted in a 1092-fold purification of lipase with 18% yield. The molecular mass of the purified enzyme was determined to be approximately 42 kDa by SDS-PAGE and mass spectrometer. The lipase was stable in the pH range of 8.5–10.0, with the optimum pH 9.0. The enzyme exhibited maximum activity at 33 °C and retained 92% of original activity after incubation at 35 °C for 3 h. The protein hydrolyzed p-nitrophenyl esters with acyl chain lengths between C4 and C12. Enzyme activity was strongly inhibited in the presence of Cu²⁺ and Zn²⁺ but promoted by non-ionic surfactants. The lipase demonstrated higher enantioselectivity toward R-isomer of ethyl 2-arylpropanoate than the commercial lipases, and can be used potentially as a catalyst to prepare optically pure pharmaceuticals.     

Refolding,purification and characterization of an organic solvent-tolerant lipase from Serratia marcescens ECU1010

Expression of recombinant proteins as inclusion bodies in bacteria is one of the most efficient ways to produce cloned proteins, as long as the inclusion bodies can be successfully refolded. In this study, the different parameters were investigated and optimized on the refolding of denatured lipase. The maximum lipase activity of 5000 U/L was obtained after incubation of denatured enzyme in a refolding buffer containing 20 mM Tris–HCl (pH 7.0), 1 mM Ca²⁺ at 20 °C. Then, the refolded lipase was purified to homogeneity by anion exchange chromatography. The purified refolded lipase was stable in broad ranges of temperatures and pH values, as well as in a series of water-miscible organic solvents. In addition, some water-immiscible organic solvents, such as petroleum ether and isopropyl ether, could reduce the polarity and increase the nonpolarity of the refolding system. The results of Fourier transform infrared (FT-IR) microspectroscopy were the first to confirm that lipase refolding could be further improved in the presence of organic solvents. The purified refolded lipase could enantioselectively hydrolyze trans-3-(4-methoxyphenyl) glycidic acid methyl ester [(±)-MPGM]. These features render the lipase attraction for biotechnological applications in the field of organic synthesis and pharmaceutical industry.     

Separation,characterization and catalytic properties of Lip2 isoforms from Candida sp. 99-125

Lipase (EC.3.1.1.3) from Candida sp. 99-125 was separated into four isoforms (isoform A, isoform B, isoform C, and isoform D) by two steps of ion exchange chromatography. As analyzed on SDS- and non-denaturing PAGE, the four isoforms were homogenous and had the same molecular weight of approximate 38 kDa. MALDI-TOF peptide mass fingerprinting maps and circular dichroism spectra showed the isoforms had similar peptide patterns belonging to the same protein encoded by the YLlip2 gene and different secondary structures. The isoforms had a little distinct optimum temperature in the range of 20–35 °C, and the same optimum pH (8.0). They remained to be active in methanol, ethanol and ethylene glycol at the concentration of 10% and 20% (v/v) and acetone at the concentration of 10% (v/v), and sensitive to EDTA. Triton X-100, Sodium cholate and CHAPS slightly increased their activities. The metal ion Ca²⁺ and Mg²⁺ had mild effect on lipase activity. The isoforms showed a preference for long chain fatty acid triglyceride (triolein and olive). The lipase purified by one step of ion exchange chromatography and isoforms were less active than crude enzyme to catalyze cetyl alcohol and oleic acid in n-hexane, whereas the presence of small concentration of added water dramatically activated crude lipase but less the purified preparations.     

Homologous expression,purification and characterization of a novel high-alkaline and thermal stable lipase from Burkholderia cepacia ATCC 25416

The lipase secreted by Burkholderia cepacia ATCC 25416 was particularly attractive in detergent and leather industry due to its specific characteristics of high alkaline and thermal stability. The lipase gene (lipA), lipase chaperone gene (lipB), and native promoter upstream of lipA were cloned. The lipA was composed of 1095 bp, corresponding to 364 amino acid residues. The lipB located immediately downstream of lipA was composed of 1035 bp, corresponding to 344 amino acid residues. The lipase operon was inserted into broad host vector pBBRMCS1 and electroporated into original strain. The homologous expression of recombinant strain showed a significant increase in the lipase activity. LipA was purified by three-step procedure of ammonium sulfate precipitation, phenyl-sepharose FF and DEAE-sepharose FF. SDS-PAGE showed the molecular mass of the lipase was 33 kDa. The enzyme optimal temperature and pH were 60 °C and 11.0, respectively. The enzyme was stable at 30–70 °C. After incubated in 70 °C for 1 h, enzyme remained 72% of its maximal activity. The enzyme exhibited a good stability at pH 9.0–11.5. The lipase preferentially hydrolyzed medium-chain fatty acid esters. The enzyme was strongly activated by Mg²⁺, Ca²⁺, Cu²⁺, Zn²⁺, Co²⁺, and apparently inhibited by PMSF, EDTA and also DTT with SDS. The enzyme was compatible with various ionic and non-ionic surfactants as well as oxidant H₂O₂. The enzyme had good stability in the low- and non-polar solvents.     

Evaluating aqueous two-phase systems for Yarrowia lipolytica extracellular lipase purification

In this study an aqueous two-phase system (ATPS) composed of polyethylene glycol (PEG) and potassium phosphate was tested for the purification of lipase from Yarrowia lipolytica IMUFRJ 50682. Ultrafiltration and precipitation with acetone and kaolin were also used as traditional comparison methods Ultrafiltration was a good method with a purification factor of 6.55, but protease was also purified in this extract. For the precipitation with acetone and kaolin lower values of lipase and protease activity were found in relation to the original crude enzyme extract. Under the best conditions of ATPS (pH 6 and 4 °C), the purification fold was greater than 40 and selectivity was almost 500. Lipase was recovered in the salty phase which makes it easier to purify it. The optimum pH and temperature ranges for purified lipase with this system was 6–7 and 35–40 °C, respectively. Lipase thermostability was increased in relation to crude extract after the purification with the PEG/phosphate buffer system for temperatures lower than 50 °C. All enzyme extracts showed good stability to a wide pH range. Y. lipolytca lipase was successfully purified by using ATPS in a single downstream processing step and presented good process characteristics after this treatment.     

Isolation and screening of Streptomyces sp. Al-Dhabi-49 from the environment of Saudi Arabia with concomitant production of lipase and protease in submerged fermentation

In this study, Streptomyces sp. Al-Dhabi-49 was isolated from the soil sample of Saudi Arabian environment for the simultaneous production of lipase and protease in submerged fermentation. The process parameters were optimized to enhance enzymes production. The production of protease and lipase was found to be maximum after 5 days of incubation (139.2 ± 2.1 U/ml, 253 ± 4.4 U/ml). Proteolytic enzyme increases with the increase in pH up to 9.0 (147.2 ± 3.6 U/ml) and enzyme production depleted significantly at higher pH values. In the case of lipase, production was maximum in the culture medium containing pH 8.0 (166 ± 1.3 U/ml). The maximum production of protease was observed at 40 °C (174 ± 12.1 U/ml) by Streptomyces sp. Lipase activity was found to be optimum at the range of temperatures (30–50 °C) and maximum production was achieved at 35 °C (168 ± 7.8 U/ml). Among the evaluated carbon sources, maltose significantly influenced on protease production (218 ± 12.8 U/ml). Lipase production was maximum when Streptomyces sp. was cultured in the presence of glucose (162 ± 10.8U/ml). Among various concentrations of peptone, 1.0% (w/v) significantly enhanced protease production. The lipase production was very high in the culture medium containing malt extract as nitrogen source (86 ± 10.2 U/ml). Protease production was maximum in the presence of Ca²⁺ as ionic source (212 ± 3.8 U/ml) and lipase production was enhanced by the addition of Mg²⁺ with the fermentation medium (163.7 ± 6.2 U/ml).     

Characterization of a spore surface lipase from the biocontrol agent Metarhizium anisopliae

A Metarhizium anisopliae spore surface lipase (MASSL) strongly bound to the fungal spore surface has been purified by ion exchange chromatography on DEAE sepharose followed by ultrafiltration and hydrophobic interaction chromatography on phenyl sepharose. Electrophoretic analyses showed that the molecular weight of this lipase is ～66 kDa and pI is 5.6. Protein sequencing revealed that identified peptides in MASSL shared identity with several lipases or lipase-related sequences. The enzyme was able to hydrolyze triolein, the animal lipid cholesteryl stearate and all ρNP ester substrates tested with some preference for esters with a short acyl chain. The values of K_m and V_max for the substrates ρNP palmitate and ρNP laurate were respectively 0.474 mM and 1.093 mMol min^?1 mg^?1 and 0.712 mM and 5.696 mMol min^?1 mg^?1. The optimum temperature of the purified lipase was 30 °C and the enzyme was most stable within the most acid pH range (pH 3–6). Triton X-100 increased and SDS reduced enzyme lipolytic activity. MASSL activity was stimulated by Ca²⁺, Mg²⁺ and Co²⁺ and inhibited by Mn²⁺. The inhibitory effect on activity exerted by EDTA and EGTA was limited, while the lipase inhibitor Ebelactone B completely inhibited MASSL activity as well as PMSF. Methanol 0.5% apparently did not affect MASSL activity while β-mercaptoethanol activated the enzyme.     

An organic solvent–tolerant lipase from Streptomyces sp. CS133 for enzymatic transesterification of vegetable oils in organic media

The enzymatic route for biodiesel production has been noted to be cost ineffective due to the high cost of biocatalysts. Reusing the biocatalyst for successive transesterification cycles is a potential solution to address such cost inefficiency. However, when organic solvent like methanol is used as acyl-acceptor in the reaction, the biocatalyst (lipase) gets severely inactivated due to the inhibitory effect of undissolved methanol in the reaction medium. Thus, organic solvent–tolerant lipase is highly desirable for enzymatic transesterification. In response to such desirability, a lipase (LS133) possessing aforesaid characteristic was extracted from Streptomyces sp. CS133. Relative molecular mass of the purified LS133 was estimated to be 39.8 kDa by SDS-PAGE. Lipase LS133 was stable in pH range 5.0–9.0 and at temperature lower than 50 °C while its optimum lipolytic activity was achieved at pH 7.5 and 40 °C. It showed the highest hydrolytic activity towards long chain p-nitrophenyl palmitate with K_m and V_max values of 0.152 mM and 270.2 mmol min^?1 mg^?1, respectively. It showed non-position specificity for triolein hydrolysis. The first 15 amino acid residues of its N-terminal sequence, AIPLRQTLNFQAXYQ, were noted to have partial similarity with some of the previously reported microbial lipases. Its catalytic involvement in biodiesel production process was confirmed by performing enzymatic transesterification of vegetable oils with methanol.     

Purification of keratinase from poultry farm isolate-Scopulariopsis brevicaulis and statistical optimization of enzyme activity

The fungus Scopulariopsis brevicaulis was isolated from poultry farm soil at Namakkal, India. The extracellular keratinase from this fungus was purified to homogeneity by ammonium sulphate precipitation and procedure involving DEAE-Cellulose and Sephadex G-100 chromatographic techniques. The purified enzyme was formed from a monomeric protein with molecular masses of 39 and 36 kDa by SDS–PAGE and gel filtration, respectively. The optimum pH at 40 °C was 8.0 and the optimum temperature at pH 8.0 was 40 °C. The activity of purified keratinase with respect to pH, temperature and salt concentration was optimized by Box–Behnken design experiment. It was shown that a second-order polynominal regression model could properly interpret the experimental data with an R²-value of 0.9957 and an F-value of 178.32, based on the maximum enzyme activity examined. Calculated optimum conditions were predicted to confer a 100% yield of keratinase activity with 5 mM CaCl₂, pH 8.0 and at a temperature of 40 °C. The enzyme was strongly inhibited by PMSF, which suggests a serine residue at or near an active site. The purified keratinase was examined with its potential for dehairing the skin.     

Purification and characterization of an intracellular esterase from a Fusarium species capable of degrading dimethyl terephthalate

Esterase is the key enzyme involved in microbial degradation of phthalate esters (PAEs). In this study, an intracellular esterase was purified from a coastal sediment fungus Fusarium sp. DMT-5-3 capable of utilizing dimethyl terephthalate (DMT) as a substrate. The purified enzyme is a polymeric protein consisting of two identical subunits with a molecular mass of about 84 kDa. The enzyme showed a maximum esterase activity at 50 °C and was stable below 30 °C. The optimal pH was 8.0 and the enzyme was stable between pH 6.0 and 10.0. The esterase activity was inhibited by Cr³⁺, Hg²⁺, Cu²⁺, Zn²⁺, Ni²⁺, and Cd²⁺. Substrate specificity analysis showed that the enzyme was specific to DMT hydrolysis, but had no effect on other isomers of dimethyl phthalate esters (DMPEs) or monomethyl phthalate esters (MMPEs). These findings suggest that the phthalate esterase produced by Fusarium sp. DMT-5-3 is inducible and distinctive esterases involved in hydrolysis of the two carboxylic ester linkages of DMPEs.     

An extracellular solvent stable alkaline lipase from Pseudomonas sp. DMVR46: Partial purification,characterization and application in non-aqueous environment

The biosynthesis of esters is currently of much commercial interest because of the increasing popularity and demand for natural products among consumers. Biotransformation and enzymatic methods of ester synthesis are more effective when performed in non-aqueous media. In present study, an organic solvent stable Pseudomonas sp. DMVR46 lipase was partially purified by acetone precipitation and ion exchange chromatography with 28.95-fold purification. The molecular mass of the lipase was found to be ∼32 kDa. The partially purified lipase was optimally active at 37 °C and pH 8.5. The enzyme showed greater stability toward organic solvents such as isooctane, cyclohexane and n-hexane retaining more than 70% of its initial activity. The metal ions such as Ca²⁺, Ba²⁺ and Mg²⁺ had stimulatory effects on lipase activity, whereas Co²⁺ and Zn²⁺ strongly inhibited the activity. Also lipase exhibited variable specificity/hydrolytic activity toward different 4-nitrophenyl esters. DMVR46 lipase was further immobilized into AOT-based organogels used for the synthesis of flavor ester pentyl valerate in presence of organic solvents. The organogels showed repeated use of enzyme with meager loss of activity even upto 10 cycles. The solvent-stable lipase DMVR46 thus proved to be an efficient catalyst showing an attractive potency for application in biocatalysis under non-aqueous environment.     

Cloning,expression and characterization of an organic solvent tolerant lipase from Pseudomonas fluorescens JCM5963

A novel lipase gene from an organic solvent degradable strain Pseudomonas fluorescens JCM5963 was cloned, sequenced, and overexpressed as an N-terminus His-tag fusion protein in E. coli. The alignment of amino acid sequences revealed that the protein contained a lipase motif and shared a medium or high similarity with lipases from other Pseudomonas strains. It could be defined as a member of subfamily I.1 lipase. Most of the recombinant proteins expressed as enzymatically active aggregates soluble in 20 mM Tris–HCl buffer (pH 8.0) containing sodium deoxycholate are remarkably different from most subfamily I.1 and I.2 members of Pseudomonas lipases expressed as inactive inclusion body formerly described in E. coli. The recombinant lipase (rPFL) was purified to homogeneity by Ni-NTA affinity chromatography and Sephacryl S-200 gel filtration chromatography. The purified lipase was stable in broad ranges of temperatures and pH values, with the optimal temperature and pH value being 55 °C and 9.0, respectively. Its activity was found to increase in the presence of metal ions such as Ca²⁺, Sn²⁺ and some non-ionic surfactants. In addition, rPFL was activated by and remained stable in a series of water-miscible organic solvents solutions and highly tolerant to some water-immiscible organic solvents. These features render this novel lipase attraction for biotechnological applications in the field of organic synthesis and detergent additives.     

Arginase from Bacillus thuringiensis SK 20.001: Purification,characteristics, and implications for l-ornithine biosynthesis

An l-ornithine high producing strain Bacillus thuringiensis SK20.001 was screened by our laboratory. An intracellular arginase used to biosynthesize l-ornithine from the strain was purified and characterized. The final specific arginase activity was 589.2 units/mg, with 70.1 fold enrichment and 22.4% recovery. The molecular weight of the enzyme was approximately 33,000 Da as evaluated by SDS-PAGE and 191,000 Da as determined by gel filtration. The enzyme had an optimum pH of 10.0 and an optimum temperature of 40 °C. It was stable from pH 8.0–12.0 and <50 °C without Mn²⁺. The presence of Mn²⁺ and Ni²⁺ had strong effects on the enzyme activity, and Mn²⁺ significantly increased the thermal stability of the enzyme. The arginase was slightly inhibited by Ca²⁺, Fe²⁺ and Zn²⁺. Trp, Asp, Glu, Tyr, and Arg residues were directly involved in the arginase activity evaluated by chemical modifications. The K_m and V_max for l-arginine were estimated to be 15.6 mM and 538.9 μmol/min/mg. The biosynthesis yield of l-ornithine was 72.7 g/L with the enzyme.     

Purification and biochemical properties of an extracellular acid phytase produced by the Saccharomyces cerevisiae CY strain

An extracellular acid phytase was purified to homogeneity from the culture supernatant of the Saccharomyces cerevisiae CY strain by ultrafiltration, DEAE-Sepharose column chromatography, and Sephacryl S-300 gel filtration. The molecular weight of the purified enzyme was estimated to be 630 kDa by gel filtration. Removing the sugar chain by endoglycosidase H digestion revealed that the molecular mass of the protein decreased to 446 kDa by gel filtration and gave a band of 55 kDa by SDS-PAGE. The purified enzyme was most active at pH 3.6 and 40 °C and was fairly stable from pH 2.5 to 5.0. The phytase displayed broad substrate specificity and had a K_m value of 0.66 mM (sodium phytate, pH 3.6, 40 °C). The phytase activity was completely inhibited by Fe³⁺ and Hg²⁺, and strongly inhibited (maximum of 91%) by Ba²⁺, Co²⁺, Cu⁺, Cu²⁺, Fe²⁺, Mg²⁺, and Sn²⁺ at 5 mM concentrations.