Effect of Heat on Spores of Rough and Smooth Variants of Bacillus stearothermophilus

Spores of variants of Bacillus stearothermophilus were subjected to activating and lethal temperatures. Spore suspensions which were incubated longer contained a higher percentage of spores of the rough variant. The effect of sublethal heat on spore suspensions containing mixed variants (rough and smooth) was difficult to measure at sublethal temperatures (110 C), since the rough variant was not as heat-resistant. While the rough variant was activated in a shorter time, the smooth variant was not activated; when the smooth variant was activated, the rough was killed. A higher percentage of the smooth variant was forced into dormancy after being held at 50 C for 30 hr than the rough variant. When mixed populations were subjected to a lethal temperature (120 C), the curves only reflected the smooth variant. Since the curves which represented the smooth variant or mixtures containing the smooth variant were not linear, this was thought to be due to activation overbalancing the lethal effect. This research emphasized the importance of variants in explaining differences in spore resistance among spore suspensions of the same strain.     

The effects of alterations in the suspending medium on low temperature activation of spores of Bacillus stearothermophilus NGB101

The effects of eight different sodium salts on the activation of spores of Bacillus stearothermophilus NGB101 at 30°C were examined. Sodium nitrite was a potent activator spores of NGB101. Complete activation of spore populations was obtained after 6 h or less at 30°C. Activation of spores of NGB101 in solutions of sodium nitrite, like activation in distilled water, was temperature dependent, with optimal activation at 30°C. While a potent activator of spores of NGB101 at 30°C, sodium nitrite was ineffective as an initiator of germination at 65°C. Activation of spores of NGB101 produced marked increases in colony forming spores compared with nonactivated populations. Spore populations activated in solutions of sodium nitrite gave higher plate counts compared with spores activated in distilled water.     

Sporulation Temperature Reveals a Requirement for CotE in the Assembly of both the Coat and Exosporium Layers of Bacillus cereus Spores

The Bacillus cereus spore surface layers consist of a coat surrounded by an exosporium. We investigated the interplay between the sporulation temperature and the CotE morphogenetic protein in the assembly of the surface layers of B. cereus ATCC 14579 spores and on the resulting spore properties. The cotE deletion affects the coat and exosporium composition of the spores formed both at the suboptimal temperature of 20°C and at the optimal growth temperature of 37°C. Transmission electron microscopy revealed that ΔcotE spores had a fragmented and detached exosporium when formed at 37°C. However, when produced at 20°C, ΔcotE spores showed defects in both coat and exosporium attachment and were susceptible to lysozyme and mutanolysin. Thus, CotE has a role in the assembly of both the coat and exosporium, which is more important during sporulation at 20°C. CotE was more represented in extracts from spores formed at 20°C than at 37°C, suggesting that increased synthesis of the protein is required to maintain proper assembly of spore surface layers at the former temperature. ΔcotE spores formed at either sporulation temperature were impaired in inosine-triggered germination and resistance to UV-C and H₂O₂ and were less hydrophobic than wild-type (WT) spores but had a higher resistance to wet heat. While underscoring the role of CotE in the assembly of B. cereus spore surface layers, our study also suggests a contribution of the protein to functional properties of additional spore structures. Moreover, it also suggests a complex relationship between the function of a spore morphogenetic protein and environmental factors such as the temperature during spore formation.     

Characterization of a Bacillus cereus protease mutant defective in an early stage of spore germination.

Temperature-sensitive sporulation mutants of Bacillus cereus were screened for intracellular protease activity that was more heat labile than that of the parental strain. One mutant grew as well as the wild type at 30 and 37 degrees C but sporulated poorly at 37 degrees C in an enriched or minimal medium. These spores germinated very slowly in response to alanine plus adenosine or calcium dipicolinate. During germination, spores produced by the mutant rapidly became heat sensitive, but released dipicolonic acid and mucopeptide fragments more slowly than the wild type and decreased only partially in density while remaining phase white (semirefractile). In freeze-etch electron micrographs, the mature spores were deficient in the outer cross-patched coat layer. During germination, the spore coat changes associated with wild-type germination occurred very slowly in this mutant. Although the original mutant was also a pyrimidine auxotroph, reversion to prototrophy did not alter any of the phenotypic properties discussed. Selection of revertants that germinated rapidly or sporulated well at 37 degrees C, however, resulted in restoratin of all wild-type properties (exclusive of the pyrimidine requirement) including heat-stable protease activity. The reversion frequency was consistent with an initial point mutation, indicating that a protease alteration resulted in production of spores defective in a very early stage of germination.     

Altered heat resistance in spores and vegetative cells of a mutant fromBacillus subtilis

The relationship between sporulation temperature and spore killing temperature is described.Bacillus subtilis YB886, grown and sporulated at 25°, 30°, 37°, and 45°C, produced spores having D₉₀ values of 63.5, 76.3, 89.0, and 106 min respectively. In addition, the vegetative cells of this strain also demonstrated resistance to heat killing when grown at elevated temperatures (D₅₀ of 26.6, 32.5, 39.0, and >50 min for cells grown at 25°, 30°, 37°, and 45°C). A transposon-generated mutant of strain YB886, designated as BUL786, which is missing a heat shock-induced protein (97 kDa) (Qoronfleh MW and Streips UN, BBRC, 138:526–532, 1986 and FEMS 1987), was tested for thermotolerance under similar conditions. The cells failed to respond to growth at high temperature by producing heat-resistant spores or vegetative cells. For strain BUL786 the D₉₀ of spores generated at 20°, 25°, 30°, 37°, and 45°C was 9.4, 11.3, 12.8, 14.1, and 20 min, respectively. Similarly, the D₅₀ of vegetative cells was 15, 16.8, 17.8, 19.0, and 22.3 min when the cells were grown at 20°, 25°, 30°, 37°, and 45°C. Also, sporulation of YB886 cells in the presence of cadmium chloride increased the D₉₀ values for the resulting spores (5µM CdCl₂ resulted in a D₉₀ of 160 min). Strain BUL786 failed to produce spores with any elevated D₉₀ when grown in the presence of CdCl₂.     

Inducing sporulation in different strains of alternaria solani

Summary Ultraviolet light induced abundant sporulation in two, out of the three strains ofAlternaria solani studied. Scraped cultures produced larger number of spores than unscraped ones. Ten seconds' exposure was found optimum for maximum sporulation. The optimum temperature of incubation subsequent to irradiation was 20°C. Young cultures were more responsive to ultraviolet light than the older ones. However, old cultures were more tolerant to a greater time of exposure than the younger ones. Intense ultraviolet light greatly reduced or even completely inhibited sporulation whereas low intensity of ultraviolet light was less effective in inducing sporulation. More irradiations than one greatly enhanced sporulation which reached its maximum with four irradiations. Spore length was considerably influenced by the age of the mycelium, temperature of incubation and the intensity and number of irradiations.     

High-resolution solid-state 13C nuclear magnetic resonance of bacterial spores: identification of the alpha-carbon signal of dipicolinic acid.

Natural-abundance solid-state 13C nuclear magnetic resonance spectra were obtained for bacterial spores for the first time by using the technique of cross-polarization magic-angle-spinning nuclear magnetic resonance spectroscopy. A resonance at about 150 ppm, detectable in spore samples having a Mn content of less than 0.05%, was consistent with an identification as the alpha-carbon signal of calcium dipicolinate; this signal was missing from a spore sample treated with acid to release dipicolinate and from a spore coat preparation. Carbohydrate peaks were particularly intense in spores and coat preparations of Bacillus macerans. Signals ascribable to beta-hydroxybutyrate were prominent in a B. cereus sample.     

High calcium content in Streptomyces spores and its release as an early event during spore germination.

The metal ion content of spores of five Streptomyces species was studied. A general feature of this study was the finding of a very high calcium content (1.1 to 2.1% of the dry weight). Accumulation of calcium occurred preferentially during the sporulation process. Spore calcium was located in the integument fraction, and more than 95% of the calcium was removed from intact spores by ethylene glycol-bis(beta-aminoethyl ether)-N,N-tetraacetic acid. Several divalent cations (Mg2+, Mn2+, Zn2+, and Fe2+) which induced darkening of spores and loss of heat resistance also caused the release of calcium from spores. In addition, darkening of spores was blocked by metabolic inhibitors, whereas calcium excretion was not affected. Two different categories of events in the initiation of germination may be differentiated; first, calcium release from spores which is not energy dependent and is a consequence of triggering of germination by some divalent cations, and second, some other events including loss of heat resistance, loss of spore refractility, and a decrease in absorbance, with at least one energy-dependent step.     

The effect of the pH of the sporulation environment on the heat resistance ofClostridium perfringens spores

The inactivation ofClostridium perfringens NCTC 8239 spores at 95° and 105° C, as determined by colony formation on an agar base containing lysozyme (BASE + lysozyme), was influenced by the initial pH of the sporulation medium. In the pH range of 7.0–8.5, established by the addition of each of several biological buffers or carbonate buffer to Duncan-Strong (DS) medium, increased pH resulted in formation of spores with greater resistance to inactivation at elevated temperatures. An increase of pH from 8.5 to 9.0 resulted in increased resistance of spores formed in DS-carbonate but not DS-TAPS (N-tris[hydroxymethyl]methyl-3-aminopropanesulfonic acid) medium. Resistance to spore injury, as determined by reduced recovery on BASE compared with BASE + lysozyme, was not increased for spores formed in media with higher pH's. As the pH of the medium increased, cell growth and number of spores formed were decreased, but the percentage of sporulation was apparently not affected.     

Carbon-13 (<Superscript>13</Superscript>C) Labeling of <Emphasis Type="Italic">Bacillus subtilis</Emphasis> Vegetative Cells and Spores: Suitability for DNA Stable Isotope Probing (DNA-SIP) of Spores in Soils

To test the suitability of DNA stable isotope probing (DNA-SIP) for characterizing bacterial spore populations in soils, the properties of Bacillus subtilis cells and spores intensely labeled with [¹³C]glucose were characterized. Spore germination, vegetative growth rates, and sporulation efficiency were indistinguishable on glucose versus [¹³C]glucose, as were spore wet heat and UV resistance. Unlabeled and ¹³C-labeled spores contained 1.0989 and 74.336 at.% ¹³C, and exhibited wet densities of 1.356 and 1.365 g/ml, respectively. Chromosomal DNAs containing ¹²C versus ¹³C were readily separated by their different buoyant densities in cesium chloride/ethidium bromide gradients.     

Sporulation and enterotoxin production by Clostridium perfringens type A at 37 and 43 degrees C.

Enterotoxin-positive strains of Clostridium perfringens were grown in Duncan-Strong sporulation medium in the presence of 0.4% (7.9 mM) raffinose at 37 and 43 degrees C. Enterotoxin- and heat-resistant spores were produced at similar concentrations but sooner at 43 degrees C than at 37 degrees C. There was a direct relationship between spore heat resistance and sporulation temperature (32, 37, and 43 degrees C).     

Sporulation and enterotoxin production by Clostridium perfringens type A at 37 and 43 degrees C.

Enterotoxin-positive strains of Clostridium perfringens were grown in Duncan-Strong sporulation medium in the presence of 0.4% (7.9 mM) raffinose at 37 and 43 degrees C. Enterotoxin- and heat-resistant spores were produced at similar concentrations but sooner at 43 degrees C than at 37 degrees C. There was a direct relationship between spore heat resistance and sporulation temperature (32, 37, and 43 degrees C).     

Studies on the rust,Maravalia cryptostegiae,a potential biological control agent of rubber-vine weed,Cryptostegia grandiflora (Asclepiadaceae: Periplocoideae), in Australia,II: Infection

The parameters which govern infection of rubber-vine weed by the rustMaravalia cryptostegiae were investigated. The infection process, from appressorial formation to sporulation, is described and illustrated. Uredinioid teliospores have an optimum temperature range for germination at 22–27 °C, both in vitro and in vivo. However, germination on the rubber-vine leaf was more than double (81–92%) that in the absence of the host, and appressoria were formed only in vivo. An optimum temperature of 20–22°C and a dew period of 12 hours or more gave the highest level of infection as measured by sporulation density. The latent period from inoculation to pustule formation decreased with increasing temperature; the shortest period (8–11 days) being recorded at 25–27°C. At the lower temperatures (18°C), this was significantly extended (19–21 days). Four successive inoculations significantly reduced plant height and dry weight, although a compensatory growth flush occurred after the third inoculation. The addition of cryoprotectants had a negative affect on spore viability and subsequent infectivity. Cooling dry spores to –196°C at the rate of 10°C min^–1 gave the best results, with high germination (93–65%) up to 8 days after thawing.     

Effects of temperature on the spores of thermophilic actinomycetes

The effects of temperature on the germination properties of spores of thermophilic actinomycetes were examined. Temperatures above and below the growth temperature of 55° C were found to produce marked changes in the germination properties of spores. High temperatures caused reductions in the germinative activities of spores. However, heated spore populations regained original germinative activities after maintaining them for suitable periods of time at 25°C. Recovery from the effects of heat on spore germination was also observed at 4°C, but at a much slower rate compared with 25°C. Spores of two strains of thermophilic actinomycetes, grown and prepared at 55°C, failed to germinate. Storage of dormant (nonactivated) spore populations at different temperatures demonstrated a low temperature requirement for the activation of these spores; while little or no activation occurred at 55°C, rapid activation took place at 25°C. Heating the spores at 80°C for 30 min slightly delayed the activation (rates) of spores at 25°C. The requirement of low temperature for spore activation was strain dependent and was influenced by the composition of the germination medium.     

Inducing sporulation in Alternaria solani I. Effect of water treatment

The sporulation was induced when fully grown cultures were given dip or spray treatment with distilled water (cold or hot) and thereafter, kept partially covered at different temperatures. Cultures dipped in cold water (4° C) for 4 minutes or sprayed with cold water (4° C) or hot water (58° C) and thereafter incubated at room temperature (13–26° C) in diffused sunlight, produced maximum number of spores within 60 hours. Incubating water treated cultures in diffused sunlight or complete darkness and age and scraping of the cultures had a considerable effect upon intensity of sporulation. The cultures yield a number of subsequent crops of spores when scraped and given dip treatment with cold or hot water, after obtaining each crop of spores.     

Characteization of bacterial spores from high-temperature growth transformants ofBacillus subtilis

Spores from high-temperature growth transformants ofBacillus subtilis were examined for a number of sporal characteristics. Analyses showed a dramatic increase in both the calcium (Ca) and dipicolinic acid (DPA) contents, a slight increase in the Ca/DPA mole ratio, but a reduction in magnesium (Mg) content and the Mg/Ca mole ratio. The spore wet density increased, whereas the core/core+cortex volume ratio and protoplast water content decreased. Spore heat resistance increased but not to levels normally observed for thermophilicBacillus species. It is concluded that the biophysical and biochemical changes within the spores of the transformants are influenced by both the inherent mesophilic genotype and the transformant's inherited ability to grow at elevated temperatures.Florida Agricultural Experiment Station, Journal Series No. 8189     

Improved Medium for Sporulation of Clostridium perfringens

An improved sporulation medium has been developed in which all five strains of Clostridium perfringens tested exhibited a 100- to 10,000-fold increase in numbers of spores when compared with spore yields in SEC medium under comparable conditions. In addition, three of five strains produced a 100- to 1,000-fold increase, with the remaining two strains yielding approximately the same numbers of spores, when compared with strains cultured in Ellner medium. At the 40-hr sampling time, 18 of 27 strains produced a 10- to 100-fold increase in numbers of spores in our medium, when compared to spore production obtained in a medium recently reported by Kim et al. The new medium contained yeast extract, 0.4%; proteose peptone, 1.5%; soluble starch, 0.4%; sodium thioglycolate, 0.1%; and Na(2)HPO(4). 7H(2)O, 1.0%. In some cases, the spore yield could be increased by the addition of activated carbon to the new medium. The inclusion of activated carbon in the medium resulted in spores with slightly greater heat resistance than spores produced in the new medium without added carbon or in SEC or in Ellner medium. The major differences in heat resistance of the various strains appeared to be genetically determined rather than reflections of a particular sporulation medium. A definite heat-shock requirement was shown for four of four strains, with the optimal temperature ranging from 60 C for a heat-sensitive strain to 80 C for a heat-resistant strain. Heating for 20 min at the optimal temperature resulted in a 100-fold increase over the viable count obtained after heating for 20 min at 50 C.     

The effect of acid shock on sporulating Bacillus subtilis cells

AIMS: To study the effect of acid shock in sporulation on the production of acid-shock proteins, and on the heat resistance and germination characteristics of the spores formed subsequently. METHODS AND RESULTS: Bacillus subtilis wild-type (SASP-alpha+beta+) and mutant (SASP-alpha-beta-) cells in 2 x SG medium at 30 degrees C were acid-shocked with HCl (pH 4, 4.3, 5 and 6 against a control pH of 6.2) for 30 min, 1 h into sporulation. The D85-value of B. subtilis wild-type (but not mutant) spores formed from sporulating cells acid-shocked at pH 5 increased from 46.5 min to 78.8 min, and there was also an increase in the resistance of wild-type acid-shocked spores at both 90 degrees C and 95 degrees C. ALA- or AGFK-initiated germination of pH 5-shocked spores was the same as that of non-acid-shocked spores. Two-dimensional gel electrophoresis showed only one novel acid-shock protein, identified as a vegetative catalase 1 (KatA), which appeared 30 min after acid shock but was lost later in sporulation. CONCLUSIONS: Acid shock at pH 5 increased the heat resistance of spores subsequently formed in B. subtilis wild type. The catalase, KatA, was induced by acid shock early in sporulation, but since it was degraded later in sporulation, it appears to act to increase heat resistance by altering spore structure. SIGNIFICANCE AND IMPACT OF THE STUDY: This is the first proteomic study of acid shock in sporulating B. subtilis cells. The increasing spore heat resistance produced by acid shock may have significance for the heat resistance of spores formed in the food industry.     

Thermal resistance variations due to post-harvest treatments in Bacillus subtilis spores

Spores of Bacillus subtilis NCTC 10073 were produced using three different methods on solid and liquid defined media. Thermal resistance at 90C was examined in relation to the effects of cleaning procedures such as number of washings, speed and temperature of centrifugation on the spores. Ion-exchange spore forms (hydrogen and calcium) and coat-defective forms (urea-mercaptoethanol and urea-dithiothreitol-sodium dodecyl sulphate) were prepared from spores produced by the different spore production methods and compared for thermal resistance. The resistance patterns observed are discussed in terms of the spore properties of germinability. colony formation, dipicolinic acid and calcium contents.     

Production ofPaecilomyces Fumosoroseus conidia in submerged culture

Mexican isolates ofPaecilomyces fumosoroseus (Wize) Brown & Smith virulent to nymphs and adults ofBemisia tabaci Gennadius (Homoptera: Aleyrodidae) were screened in terms of spore production in submerged culture. Effects of light, temperature stress and yeast extract on sporulation were studied. Cycles of 12 hours light/12 hours dark increased spore production as well as an incubation for 24 hours at 37°C prior to incubation at 30°C. In absence of organic nitrogen both fungal growth and sporulation were very low. Spore production in fermentors with a culture media of a C:N ratio of 25 was doubled as compared to a media with a C:N ratio of 11. Both conidia and blastospores were produced. Production of conidia directly from blastospores through microcyclic sporulation was observed. The proportion of conidia obtained under optimal conditions was 88.8%. Submerged culture ofP. fumosoroseus seemed advantageous compared to ricefilled plastic bags production method because of shorter fermentation times, higher spore yields and substantially higher volumetric spore productivity. Results indicated that careful manipulation of nutritional and environmental conditions allowed for production of conidia during submerged growth ofP. fumosoroseus, microcyclic sporulation being induced under a set of environmental conditions including temperature stress and nutrients limitation.