Micro flow cytometry utilizing a magnetic bead-based immunoassay for rapid virus detection

The current study presents a new miniature microfluidic flow cytometer integrated with several functional micro-devices capable of viral sample purification and detection by utilizing a magnetic bead-based immunoassay. The magnetic beads were conjugated with specific antibodies, which can recognize and capture target viruses. Another dye-labeled anti-virus antibody was then used to mark the bead-bound virus for the subsequent optical detection. Several essential components were integrated onto a single chip including a sample incubation module, a micro flow cytometry module and an optical detection module. The sample incubation module consisting of pneumatic micropumps and a membrane-type, active micromixer was used for purifying and enriching the target virus-bound magnetic beads with the aid of a permanent magnet. The micro flow cytometry module and the optical detection module were used to perform the functions of virus counting and collection. Experimental results showed that virus samples with a concentration of 10(3)PFU/ml can be automatically detected successfully by the developed system. In addition, the entire diagnosis procedure including sample incubation and virus detection took only about 40min. Consequently, the proposed micro flow cytometry may provide a powerful platform for rapid diagnosis and future biological applications.     

A vertically stacked, polymer, microfluidic point mutation analyzer: rapid high accuracy detection of low-abundance K-ras mutations

Recognition of point mutations in the K-ras gene can be used for the clinical management of several types of cancers. Unfortunately, several assay and hardware concerns must be addressed to allow users not well trained in performing molecular analyses the opportunity to undertake these measurements. To provide for a larger user base for these types of molecular assays, a vertically stacked microfluidic analyzer with a modular architecture and process automation was developed. The analyzer employs a primary polymerase chain reaction (PCR) coupled to an allele-specific ligase detection reaction (LDR). Each functional device, including continuous flow thermal reactors for the PCR and LDR, passive micromixers, and ExoSAP-IT purification, was designed and tested. Individual devices were fabricated in polycarbonate using hot embossing and were assembled using adhesive bonding for system assembly. The system produced LDR products from a DNA sample in approximately 1 h, an 80% reduction in time compared with conventional benchtop instrumentation. Purifying the post-PCR products with the ExoSAP-IT enzyme led to optimized LDR performance, minimizing false-positive signals and producing reliable results. Mutant alleles in genomic DNA were quantified to the level of 0.25 ng of mutant DNA in 50 ng of wild-type DNA for a 25-μl sample, equivalent to DNA from 42 mutant cells.     

Ferrowax microvalves for fully automated serial dilution on centrifugal microfluidic platforms

We herein describe a centrifugal microfluidic system to accomplish a fully automated serial dilution. The liquid flow on the disc was regulated by utilizing ferrowax microvalves systematically integrated into the channels within specially designed metering structures. By opening the differently positioned microvalves through irradiation of IR laser to allow metering, the same amount of diluent was serially eluted to the dilution chamber from the same diluent chamber. After dilution, the diluted samples were automatically delivered to the respective final product chambers by appropriately opening or closing the microvalves in the connecting channels, followed by rotating the disc. Based on this unique design principle, six consecutive two-fold and 10-fold dilutions were successfully achieved, yielding excellent accuracy in a wide dynamic range up to six orders of magnitude. Very importantly, the overall serial dilution process, including the diluent addition, mixing, and product transfer steps, was completed very rapidly within 5 min, due to the minimized procedures enabled by the automated actuation of the ferrowax microvalves at the rationally designed positions. We expect our centrifugal microfluidic system would serve as a powerful elemental tool to realize fully automated diagnostic microsystems involving the serial dilution process.     

Analysis of the independent power of age-related,anthropometric and mechanical factors as determinants of the structure of radius and tibia in normal adults. A pQCT study

To compare the independent influence of mechanical and non-mechanical factors on bone features, multiple regression analyses were performed between pQCT indicators of radius and tibia bone mass, mineralization, design and strength as determined variables, and age or time since menopause (TMP), body mass, bone length and regional muscles’ areas as selected determinant factors, in Caucasian, physically active, untrained healthy men and pre- and post-menopausal women. In men and pre-menopausal women, the strongest influences were exerted by muscle area on radial features and by both muscle area and bone length on the tibia. Only for women, was body mass a significant factor for tibia traits. In men and pre-menopausal women, mass/design/strength indicators depended more strongly on the selected determinants than the cortical vBMD did (p<0.01-0.001 vs n.s.), regardless of age. However, TMP was an additional factor for both bones (p<0.01-0.001). The selected mechanical factors (muscle size, bone lengths) were more relevant than age/TMP or body weight to the development of allometrically-related bone properties (mass/design/strength), yet not to bone tissue “quality” (cortical vBMD), suggesting a determinant, rather than determined role for cortical stiffness. While the mechanical impacts of muscles and bone levers on bone structure were comparable in men and pre-menopausal women, TMP exerted a stronger impact than allometric or mechanical factors on bone properties, including cortical vBMD.     

Cardiac sarcomere mechanics in health and disease

The sarcomere is the fundamental structural and functional unit of striated muscle and is directly responsible for most of its mechanical properties. The sarcomere generates active or contractile forces and determines the passive or elastic properties of striated muscle. In the heart, mutations in sarcomeric proteins are responsible for the majority of genetically inherited cardiomyopathies. Here, we review the major determinants of cardiac sarcomere mechanics including the key structural components that contribute to active and passive tension. We dissect the molecular and structural basis of active force generation, including sarcomere composition, structure, activation, and relaxation. We then explore the giant sarcomere-resident protein titin, the major contributor to cardiac passive tension. We discuss sarcomere dynamics exemplified by the regulation of titin-based stiffness and the titin life cycle. Finally, we provide an overview of therapeutic strategies that target the sarcomere to improve cardiac contraction and filling.     

Body mass reconstruction on the basis of selected skeletal traits

The objective of this paper is: to estimate the body mass of the skeletons with the mechanical method (femoral head body mass estimation method--FH) and non-mechanical method (stature/living bi-iliac breadth body mass estimation method--ST/LBIB); to compare the reliability and potential use of results obtained with both methods. The material (46 skeletons, 26 males, 20 females) used in the study came from the medieval burial ground in Cedynia, Poland. Body mass reconstruction according to non-mechanical method was made using equations proposed by Ruff et al. (2005). Body mass estimation based on the mechanical method was calculated using formulas proposed by Ruff et al. (1995). In the mechanical body mass reconstruction method, femoral superoinferior breadth was used. Reconstruction of body weight using the non-mechanical method was based on maximum pelvic breadth and reconstructed body height. The correlation between bi-iliac breadth and femoral head measurements and the correlation between femoral head and reconstructed body height were also calculated. The significance of differences between the body mass of male and female individuals was tested with the Mann-Whitney U-test. The significance of differences between body mass values obtained with the mechanical (FH) and the non-mechanical method (ST/ LBIB) was tested using Pearson's correlation. The same test was used for the calculation of the relationship between bi-iliac breadth and femoral head measurements and between femoral head and reconstructed body height. In contrast to females, in males there is no statistically significant correlation between body mass estimated with the mechanical method (FH) and the non-mechanical method (ST/LBIB). In both sexes there was not statistically significant correlation between bi-iliac breadth and femoral head measurements. Only in the females group the correlation between femoral head and reconstructed body height was statistically significant. It is worth to continue the research. The obtained results would be a valuable contribution to the knowledge on body mass reconstruction methods.     

Microfluidic chips controlled with elastomeric microvalve arrays

Miniaturized microfluidic systems provide simple and effective solutions for low-cost point-of-care diagnostics and high-throughput biomedical assays. Robust flow control and precise fluidic volumes are two critical requirements for these applications. We have developed microfluidic chips featuring elastomeric polydimethylsiloxane (PDMS) microvalve arrays that: 1) need no extra energy source to close the fluidic path, hence the loaded device is highly portable; and 2) allow for microfabricating deep (up to 1 mm) channels with vertical sidewalls and resulting in very precise features.The PDMS microvalves-based devices consist of three layers: a fluidic layer containing fluidic paths and microchambers of various sizes, a control layer containing the microchannels necessary to actuate the fluidic path with microvalves, and a middle thin PDMS membrane that is bound to the control layer. Fluidic layer and control layers are made by replica molding of PDMS from SU-8 photoresist masters, and the thin PDMS membrane is made by spinning PDMS at specified heights. The control layer is bonded to the thin PDMS membrane after oxygen activation of both, and then assembled with the fluidic layer. The microvalves are closed at rest and can be opened by applying negative pressure (e.g., house vacuum). Microvalve closure and opening are automated via solenoid valves controlled by computer software.Here, we demonstrate two microvalve-based microfluidic chips for two different applications. The first chip allows for storing and mixing precise sub-nanoliter volumes of aqueous solutions at various mixing ratios. The second chip allows for computer-controlled perfusion of microfluidic cell cultures.The devices are easy to fabricate and simple to control. Due to the biocompatibility of PDMS, these microchips could have broad applications in miniaturized diagnostic assays as well as basic cell biology studies.     

阵列光镊与微流控芯片技术的结合与应用

在生物医学研究领域中,阵列光镊与微流控芯片的结合已经成为进行细胞操纵、转移以及少量细胞样品分选等方面最有希望的方法之一。光镊技术对样品具有非接触弹性控制、无机械损伤、可无菌操作等优势,以及微流控芯片分析的高效、多功能、微型化、低成本等优势,成为芯片实验室(Lab-on-a-Chip)的重要研究方面。该文概述了阵列光镊技术的形成与研究现状以及微流控芯片技术的发展与应用现状,分析了在不同阵列光镊形成方法下结合微流控芯片可实现的功能与应用,并对其发展趋势进行了展望。     

Mechanical properties and composition of mesenteric small arteries of simulated microgravity rats with and without daily -G(x) gravitation

The aim of the present study was to evaluate the active and passive mechanical properties and wall collagen and elastin contents of mesenteric small arteries (MSAs) isolated from rats of 28-day simulated microgravity (SUS), countermeasure [S + D: SUS plus 1 h/d -G(x) to simulate intermittent artificial gravity (IAG)] and control (CON) groups. Three mechanical parameters were calculated: the overall stiffness (β), circumferential stress (σ(θ))-strain (ε(θ)) relationship and pressure-dependent incremental elastic modulus (E(inc,p)). Vessel wall collagen and elastin percentage were quantified by electron microscopy. The results demonstrate that the active mechanical behavior of MSAs differs noticeably among the three groups: the active stress-strain curve of SUS vessels is very close to the passive curve, whereas the active σ(θ)-ε(θ) curves of CON and S + D vessels are shifted leftward and display a parabolic shape, indicating that for MSAs isolated from S + D, but not those from SUS rats, the pressure-induced myogenic constriction can effectively stiffen the vessel wall as the CON vessels. The passive mechanical behavior of MSAs does not show significant differences among the three groups. However, the percentage of collagen is decreased in the wall of SUS and S + D compared with CON vessels in the following order: SUS < S + D < CON. Thus, the relationship between passive mechanical behavior and compositional changes may be complex and yet depends on factors other than the quantity of collagen and elastin. These findings have provided biomechanical data for the understanding of the mechanism of postflight orthostatic intolerance and its gravity-based countermeasure.     

An enzymatic immunoassay microfluidics integrated with membrane valves for microsphere retention and reagent mixing

The present study presents a new microfluidic device integrated with pneumatic microvalves and a membrane mixer for enzyme-based immunoassay of acute myocardial infarction (AMI) biomarkers, namely, myoglobin, and heart-type fatty acid binding protein (H-FABP). Superparamagnetic microspheres with carboxyl groups on their surfaces were used as antibody solid carriers. A membrane mixer consisting of four ψ-type membrane valves was assembled under the reaction chamber for on-chip performing microsphere trapping and reagent mixing. The entire immunoassay process, including microsphere capture, reagent input, mixing, and subsequent reaction, was accomplished on the device either automatically or manually. The post-reaction substrate resultant was analyzed using a microplate reader. The results show that the average absorbance value is correlated with the concentration of cardiac markers, in agreement with the results obtained using a conventional microsphere-based immunoassay; this indicated that the proposed on-chip immunoassay protocol could be used to detect both myoglobin and H-FABP. The minimum detectable concentration is 5 ng/mL for myoglobin and 1 ng/mL for H-FABP.     

Current and emerging techniques of fetal cell separation from maternal blood

Intense research has been carried out in recent years into methods that aim to harvest fetal genetic material from maternal blood as substitutes to amniocentesis and chorionic villus sampling. Just over 30 years have past since the first fetal cells were separated from maternal blood using flow cytometry highlighting the prospect of non-invasive prenatal diagnosis of fetal abnormalities. The aim of this review paper is to describe the most commonly used cell separation methods with emphasis on the isolation of fetal cells from maternal blood. The most significant breakthroughs and advances in fetal cell separation are reviewed and critically analyzed. Although much has been accomplished using well established techniques, a rapid and inexpensive method to separate fetal cells with great accuracy, sensitivity and efficiency to maximize cell yield is still required. In the past decade MEMS (Micro Electro Mechanical Systems) technologies have enabled the miniaturization of many biological and medical laboratory processes. Lab-on-chip systems have been developed and encompass many modules capable of processing different biological samples. Such chips contain various integrated components such as separation channels, micropumps, mixers, reaction and detection chambers. This article will also explore new emerging MEMS based separation strategies, which hope to overcome the current limitations in fetal cell separation.     

The effect of muscle loading on the kinematics of in vitro glenohumeral abduction

This in vitro study evaluated the effects of four different muscle-loading ratios on active glenohumeral joint abduction. Eight cadaveric shoulders were tested using a shoulder simulator designed to reproduce unconstrained abduction of the humerus via computer-controlled pneumatic actuation. Forces were applied to cables that were sutured to tendons or fixed to bone, to simulate loading of the supraspinatus, subscapularis, infraspinatus/teres minor, and anterior, middle, and posterior deltoid muscles. Four sets of muscle-loading ratios were employed, based on: (1) equal loads, (2) average physiological cross-sectional areas (pCSAs), (3) constant values of the product of electromyographic (EMG) data and pCSAs, and (4) variable ratios of the EMG and pCSA data which changed as a function of abduction angle. The investigator generated passive motions with no muscle loads simulated. Repeatability was quantified by five successive trials of the passive and simulated active motions. There was improved repeatability in the simulated active motions versus passive motions, significant for abduction angles less than 40 degrees (p=0.02). No difference was found in the repeatability of the four different muscle-loading ratios for simulated active motions (p0.067 for all angles). The improved repeatability of active over passive motion suggests simulated active motion should be employed for in vitro simulations of shoulder motion.     

Neuromechanical control of upper airway patency during sleep.

Obstructive sleep apnea is caused by pharyngeal occlusion due to alterations in upper airway mechanical properties and/or disturbances in neuromuscular control. The objective of the study was to determine the relative contribution of mechanical loads and dynamic neuromuscular responses to pharyngeal collapse during sleep. Sixteen obstructive sleep apnea patients and sixteen normal subjects were matched on age, sex, and body mass index. Pharyngeal collapsibility, defined by the critical pressure, was measured during sleep. The critical pressure was partitioned between its passive mechanical properties (passive critical pressure) and active dynamic responses to upper airway obstruction (active critical pressure). Compared with normal subjects, sleep apnea patients demonstrated elevated mechanical loads as demonstrated by higher passive critical pressures [-0.05 (SD 2.4) vs. -4.5 cmH2O (SD 3.0), P = 0.0003]. Dynamic responses were depressed in sleep apnea patients, as suggested by failure to lower their active critical pressures [-1.6 (SD 3.5) vs. -11.1 cmH2O (SD 5.3), P < 0.0001] in response to upper airway obstruction. Moreover, elevated mechanical loads placed some normal individuals at risk for sleep apnea. In this subset, dynamic responses to upper airway obstruction compensated for mechanical loads and maintained airway patency by lowering the active critical pressure. The present study suggests that increased mechanical loads and blunted neuromuscular responses are both required for the development of obstructive sleep apnea.     

Isoform diversity of giant proteins in relation to passive and active contractile properties of rabbit skeletal muscles

The active and passive contractile performance of skeletal muscle fibers largely depends on the myosin heavy chain (MHC) isoform and the stiffness of the titin spring, respectively. Open questions concern the relationship between titin-based stiffness and active contractile parameters, and titin's importance for total passive muscle stiffness. Here, a large set of adult rabbit muscles (n = 37) was studied for titin size diversity, passive mechanical properties, and possible correlations with the fiber/MHC composition. Titin isoform analyses showed sizes between approximately 3300 and 3700 kD; 31 muscles contained a single isoform, six muscles coexpressed two isoforms, including the psoas, where individual fibers expressed similar isoform ratios of 30:70 (3.4:3.3 MD). Gel electrophoresis and Western blotting of two other giant muscle proteins, nebulin and obscurin, demonstrated muscle type-dependent size differences of < or =70 kD. Single fiber and single myofibril mechanics performed on a subset of muscles showed inverse relationships between titin size and titin-borne tension. Force measurements on muscle strips suggested that titin-based stiffness is not correlated with total passive stiffness, which is largely determined also by extramyofibrillar structures, particularly collagen. Some muscles have low titin-based stiffness but high total passive stiffness, whereas the opposite is true for other muscles. Plots of titin size versus percentage of fiber type or MHC isoform (I-IIB-IIA-IID) determined by myofibrillar ATPase staining and gel electrophoresis revealed modest correlations with the type I fiber and MHC-I proportions. No relationships were found with the proportions of the different type II fiber/MHC-II subtypes. Titin-based stiffness decreased with the slow fiber/MHC percentage, whereas neither extramyofibrillar nor total passive stiffness depended on the fiber/MHC composition. In conclusion, a low correlation exists between the active and passive mechanical properties of skeletal muscle fibers. Slow muscles usually express long titin(s), predominantly fast muscles can express either short or long titin(s), giving rise to low titin-based stiffness in slow muscles and highly variable stiffness in fast muscles. Titin contributes substantially to total passive stiffness, but this contribution varies greatly among muscles.     

Passive skeletal muscle can function as an osmotic engine

Muscles are composite structures. The protein filaments responsible for force production are bundled within fluid-filled cells, and these cells are wrapped in ordered sleeves of fibrous collagen. Recent models suggest that the mechanical interaction between the intracellular fluid and extracellular collagen is essential to force production in passive skeletal muscle, allowing the material stiffness of extracellular collagen to contribute to passive muscle force at physiologically relevant muscle lengths. Such models lead to the prediction, tested here, that expansion of the fluid compartment within muscles should drive forceful muscle shortening, resulting in the production of mechanical work unassociated with contractile activity. We tested this prediction by experimentally increasing the fluid volumes of isolated bullfrog semimembranosus muscles via osmotically hypotonic bathing solutions. Over time, passive muscles bathed in hypotonic solution widened by 16.44 ± 3.66% (mean ± s.d.) as they took on fluid. Concurrently, muscles shortened by 2.13 ± 0.75% along their line of action, displacing a force-regulated servomotor and doing measurable mechanical work. This behaviour contradicts the expectation for an isotropic biological tissue that would lengthen when internally pressurized, suggesting a functional mechanism analogous to that of engineered pneumatic actuators and highlighting the significance of three-dimensional force transmission in skeletal muscle.     

Separation anxiety: stress, tension and cytokinesis

Cytokinesis, the physical separation of a mother cell into two daughter cells, progresses through a series of well-defined changes in morphology. These changes involve distinct biochemical and mechanical processes. Here, we review the mechanical features of cells during cytokinesis, discussing both the material properties as well as sources of stresses, both active and passive, which lead to the observed changes in morphology. We also describe a mechanosensory feedback control system that regulates protein localization and shape progression during cytokinesis.     

Length-tension relationships of small arteries, veins, and lymphatics from the rat mesenteric microcirculation

The passive and active length-tension relationships of isolated rat mesenteric lymphatics ( approximately 150 microm ID), and adjacent small arteries ( approximately 240 microm) and veins ( approximately 275 microm) were compared under isometric conditions using a wire myograph. About 60% of the lymphatic vessels developed spontaneous contractions in physiological saline solution at nominal preload. To maximally activate smooth muscle, 145 mM K(+) + 5 x 10(-5) M norepinephrine was used for arteries, and 145 mM K(+) + 1 x 10(-6) M substance P was used for lymphatics and veins. In response, arteries exhibited monotonic force development to a plateau level, whereas lymphatics and veins showed biphasic force development, consisting of a transient force peak followed by partial relaxation to a plateau over approximately 5 min. The passive and the active length-tension curves were similar in shape among all three vessels. However, the maximal active tension of arteries (3.4 +/- 0.42 mN/mm) was significantly greater than peak active tension (0.59 +/- 0.04 mN/mm) or plateau tension (0.20 +/- 0.04 mN/mm) in small veins and greater than peak active tension (0.34 +/- 0.02 mN/mm) or plateau tension (0.21 +/- 0.02 mN/mm) in lymphatics. Maximal active medial wall stress was similar between lymphatics and veins but was approximately fivefold higher in small arteries. For lymphatics, the pressure calculated from the optimal preload was significantly higher than that found previously in isobaric studies of isolated lymphatics, suggesting the capacity to operate at higher than normal pressures for increased responsiveness. Our results represent the first mechanical comparisons of arterial, venous, and lymphatic vessels in the same vasculature.     

Stretch-induced changes in heart rate and rhythm: clinical observations, experiments and mathematical models

Clinical and research data indicate that active and passive changes in the mechanical environment of the heart are capable of influencing both the initiation and the spread of cardiac excitation via pathways that are intrinsic to the heart. This direction of the cross-talk between cardiac electrical and mechanical activity is referred to as mechano-electric feedback (MEF). MEF is thought to be involved in the adjustment of heart rate to changes in mechanical load and would help to explain the precise beat-to-beat regulation of cardiac performance as it occurs even in the recently transplanted (and, thus, denervated) heart. Furthermore, there is clinical evidence that MEF may be involved in mechanical initiation of arrhythmias and fibrillation, as well as in the re-setting of disturbed heart rhythm by 'mechanical' first aid procedures. This review will outline the clinical relevance of cardiac MEF, describe cellular correlates to the responses observed in situ, and discuss the role that quantitative mathematical models may play in identifying the involvement of cardiac MEF in the regulation of heart rate and rhythm.     

Mechanisms of HSP72 release

Currently two mechanisms are recognized by which heat shock proteins (HSP) are released from cells; a passive release mechanism, including necrotic cell death, severe blunt trauma, surgery and following infection with lytic viruses, and an active release mechanism which involves the non classical protein release pathway. HSPs are released both as free HSP and within exosomes. This review covers recent findings on the mechanism by which stress induces the release of HSP72 into the circulation and the biological significance of circulating HSP72 to host defense against disease.