Hybridization of DNA probes with whole-community genome for detection of genes that encode microbial responses to pollutants: mer genes and Hg2+ resistance.

Nucleic acids extracted from microbial biomass without prior culturing were hybridized with probes representing four mer operons to detect genes encoding adaptation to Hg2+ in whole-community genomes. A 29-fold enrichment in sequences similar to the mer genes of transposon Tn501 occurred during adaptation in a freshwater community. In an estuarine community, all four mer genes were only slightly enriched (by three- to fivefold), suggesting that additional, yet uncharacterized, mer genes encoded adaptation to Hg2+.     

Hybridization of DNA probes with whole-community genome for detection of genes that encode microbial responses to pollutants: mer genes and Hg2+ resistance

Nucleic acids extracted from microbial biomass without prior culturing were hybridized with probes representing four mer operons to detect genes encoding adaptation to Hg2+ in whole-community genomes. A 29-fold enrichment in sequences similar to the mer genes of transposon Tn501 occurred during adaptation in a freshwater community. In an estuarine community, all four mer genes were only slightly enriched (by three- to fivefold), suggesting that additional, yet uncharacterized, mer genes encoded adaptation to Hg2+.     

Change in bacterial community during biodegradation of aniline

The response of river water microbial communities to chemical compounds was monitored under laboratory conditions using aniline as a model. Bacteria were collected from unpolluted and polluted sites. Bacterial abundance (plate and total direct counting) and its relation to aniline biodegradation was examined. Colony hybridization with 16S rRNA oligonucleotide probes was used to study the changes in microbial community structure during biodegradation of aniline. The changes in bacterial abundance and community structure were related to biodegradation of aniline. Burkholderia–Pseudomonas (rRNA group III), an authentic Alcaligenes group became dominant despite the initial differences in the microbial communities, suggesting that these genera are the main aniline degraders in the aquatic environment.     

Continuous growth kinetics of Candida utilis in pineapple cannery effluent

Candida utilis was grown on a pineapple cannery effluent as the sole carbon and energy source in a chemostat at dilution rates between 0.10 and 0.62 h(-1) to determine the growth kinetics. The principal sugars in the effluent were sucrose, glucose, and fructose. The cell yield coefficient on carbohydrate varied with dilution rate and a maximum value of 0.63 was observed at a dilution rate of 0.33 h(-1). The steady-state concentrations of carbohydrate, reducing sugar, and chemical oxygen demand (COD) appeared to follow Monod saturation kinetics with increasing dilution rate, although none of the measured parameters represented a pure substrate. The maximum specific growth rate and reducing sugar saturation constant were 0.64 h(-1) and 0.060 g/L, respectively. A maximum cell mass productivity of 2.3 g/L h was observed at a dilution rate of 0.51 h(-1). At this dilution rate, only 68% of the COD was removed. A 95% COD removal was attained at a dilution rate of 0.10 h(-1). Optimal yeast productivity and COD reduction occurred at a dilution rate of 0.33 h(-1).     

Microbial community engineering for biopolymer production from glycerol

In this work, the potential of using microbial community engineering for production of polyhydroxyalkanoates (PHA) from glycerol was explored. Crude glycerol is a by-product of the biofuel (biodiesel and bioethanol) industry and potentially a good substrate for bioplastic production. A PHA-producing microbial community was enriched based on cultivation in a feast–famine regime as successfully applied before for fatty acids-based biopolymer production. A glycerol-fed sequencing batch reactor operated at a 2-day liquid and biomass residence time and with feast–famine cycles of 24 h was used to enrich a mixed community of PHA producers. In a subsequent fed-batch PHA production step under growth-limiting conditions, the enriched mixed community produced PHA up to a dry weight content of 80 wt.%. The conversion efficiency of substrate to PHA on electron basis was 53%. Since glycerol is entering the metabolic pathways of the cell in the glycolytic pathway, it was anticipated that besides PHA, polyglucose could be formed as storage polymer as well. Indeed, polyglucose was produced in low amounts (∼10 wt.%). The results indicated that the feast–famine-based enrichment strategy was comparably successful to obtain a microbial community compared to fatty acids-based enrichment described before.     

Effects of Microbial Community Diversity on the Survival of Pseudomonas aeruginosa in the Wheat Rhizosphere

Ecological theory suggests that microbial communities with greater microbial diversity would be less susceptible to invasion by potential opportunistic pathogens. We investigated whether the survival of the opportunistic pathogen Pseudomonas aeruginosa in the wheat rhizosphere would be affected by the presence of natural and constructed microbial communities of various diversity levels. Three levels of microbial community diversity were derived from wheat roots by a dilution/extinction approach. These wheat rhizosphere inocula, as well as a gnotobiotic microbial community consisting of seven culturable wheat rhizobacterial isolates, were introduced into the nutrient solution of hydroponically grown wheat plants on the day of planting. Phenotypic characterization of the culturable microbial communities on R2A medium, Shannon microbial diversity index, community-level physiological profiles, and terminal restriction fragment length polymorphisms were used to assess the varying microbial diversity levels. At day 7 the roots were invaded with P. aeruginosa and the number of P. aeruginosa colony forming units per root were measured at day 14. The average number of surviving P. aeruginosa cells was 3.52, 4.90, 7.18, 6.65 log₁₀ cfu/root in the high, medium, low, and gnotobiotic microbial community diversity level treatments, respectively. The invasibility of the rhizosphere communities by P. aeruginosa was inversely related to the level of diversity from the dilution extinction gradient. The gnotobiotic community did not confer protection against P. aeruginosa invasion. Although these data indicate that invasibility is inversely related to diversity, further study is needed to both reproduce these findings and define the specific mechanisms of the diversity effect.     

RESPONSES OF THE PHYTOPLANKTON COMMUNITY GROWTH RATE TO NUTRIENT PULSES IN VARIABLE ESTUARINE ENVIRONMENTS

In estuaries, phytoplankton are exposed to rapidly changing conditions that may have profound effects on community structure and function. In these experiments, we evaluated the growth, productivity, and compositional responses of natural phytoplankton communities exposed to limiting nutrient additions and incubation conditions typical of estuarine habitats. Mesocosm bioassays were used to measure the short-term (2-day) growth rate, primary productivity, and group-specific biomass responses of the phytoplankton community in the Neuse River Estuary, North Carolina. A three-factor (mixing, sediment addition, and nutrient addition) experimental design was applied using 55-L mesocosm tanks. Growth rates were determined using the ¹⁴C photopigment radiolabeling method, and the abundance of algal groups was based on quantification of chemosystematic photopigments by HPLC. For Neuse River Estuary phytoplankton communities, stratified (nonmixed), turbid, and low-nitrate conditions favored increases in cryptomonad biomass. Mixed, turbid, high-nitrate conditions were favorable for increased primary productivity and chlorophytes, diatoms, and cyanobacteria. The highest community growth rates occurred under calm, high-nitrate conditions. This approach provided an assessment of the community-level phytoplankton responses and insights into the mechanisms driving blooms and bloom species in estuarine waters. The ability to rapidly alter growth rates to capitalize on conditions conducive for growth may play an important role in the timing, extent, and species involved with blooms in estuarine waters. Adaptive growth rate responses of individual species, as well as the community as a whole, further illustrate the sensitivity of estuarine ecosystems to excessive N inputs.     

Microbial community of the water column of the Selenga River-Lake Baikal biogeochemical barrier

The microbial communities of the estuarine zone and the mixing zone of river and lake waters in the Selenga River estuary were studied using the fluorescence in situ hybridization (FISH) method. The microorganisms belonging to the phylogenetic group Gammaproteobacteria were found to predominate in the river estuary, constituting up to 17% of the total bacterial community. Among cultivable microorganisms, organotrophic bacteria were predominant (2040 CFU/ml) in this zone, which results in high rates of microbial production (6.0 μg C/(l day). The microbial community structure changed with distance from the river estuary; representatives of the Alpha-, Beta-, and Gammaproteobacteria were present in equal proportions; psychrotolerant and oligotrophic bacteria were numerous. The rate of heterotrophic carbon dioxide assimilation decreased to 3.8 μg C/(l day). At 5–7 km from the river estuary, where the hydrologic, physical, and chemical conditions are similar to those of lake waters, members of the Betaproteobacteria, which are typical of the open waters of Lake Baikal, are the major representatives of planktonic microorganisms.     

Influence of dilution rate on the acidogenic phase products distribution during two-phase lactose anaerobiosis

Acidogenic fermentation of lactose was carried out in a continuous stirred reactor with a mixed anaerobic culture. From the variation of the reactor products with pH and dilution rate two possible carbon flow schemes were proposed for the reaction. In both schemes the carbon flow from pyruvate to butyrate and lactate was assumed to occur in parallel. A change in gas composition and in product concentrations at dilution rates between 0.1 and 0.15 h(-1) for pH levels between 4.5 and 6.0 was ascribed to a shift in microbial population. To clarify the mechanism radiotracer tests were made using [U-(14)C]-butyrate, [2-(14)C]-propionate and [U-(14)C]-lactate to determine the path of carbon flow during acidogenesis of lactose using a mixed culture. At a dilution rate between 0.1 and 0.15 h(-1) and pH from 4.5 to 6.0 a rise in the lactate concentration in the product was shown to be due to a microbial population shift which disabled the conversion of lactate to other intermediary metabolites. It was also found that the flow of carbon from pyruvate to butyrate and lactate occurred by parallel pathways. Also, in the presence of hydrogen reducing methanogens, lactate was almost completely converted to acetate and not propionate. Butyrate was found to be converted to acetate at a slow rate as long as hydrogen reducing methanogens were present. The role played by propionibacteria in this lactose acidogenic eocosystem was minor. From the carbon flow model it can be concluded that lactate is the most suitable marker for optimizing an acidogenic reactor in a two-phase biomethanation process.     

Degradation of methanethiol by methylotrophic methanogenic archaea in a lab-scale upflow anaerobic sludge blanket reactor

In a lab-scale upflow anaerobic sludge blanket reactor inoculated with granular sludge from a full-scale wastewater treatment plant treating paper mill wastewater, methanethiol (MT) was degraded at 30 degrees C to H2S, CO2, and CH4. At a hydraulic retention time of 9 h, a maximum influent concentration of 6 mM MT was applied, corresponding to a volumetric loading rate of 16.5 mmol liter-1 day-1. The archaeal community within the reactor was characterized by anaerobic culturing and denaturing gradient gel electrophoresis analysis, cloning, and sequencing of 16S rRNA genes and quantitative PCR. Initially, MT-fermenting methanogenic archaea related to members of the genus Methanolobus were enriched in the reactor. Later, they were outcompeted by Methanomethylovorans hollandica, which was detected in aggregates but not inside the granules that originated from the inoculum, the microbial composition of which remained fairly unchanged. Possibly other species within the Methanosarcinacaea also contributed to the fermentation of MT, but they were not enriched by serial dilution in liquid media. The archaeal community within the granules, which was dominated by Methanobacterium beijingense, did not change substantially during the reactor operation. Some of the species related to Methanomethylovorans hollandica were enriched by serial dilutions, but their growth rates were very low. Interestingly, the enrichments could be sustained only in the presence of MT and did not utilize any of the other typical substrates for methylotrophic methanogens, such as methanol, methyl amine, or dimethylsulfide.     

Dilution rate as a determinant of mycelial morphology in continuous culture

The morphology of mycelial fungi in liquid culture effects culture rheology and this in turn may affect product yield. It is therefore important to understand how environmental factors influence mycelial morphology and this paper describes the effect of dilution rate on two strains of Fusarium graminearum, the relatively sparsely branched parental strain (A3/5) and a relatively highly branched "colonial" variant (C106). At any given dilution rate, the concentration of mycelial fragments present at steady state of both strains remained approximately constant with time, suggesting that mycelial fragmentation occurred in a regular manner. However, for both strains fragment concentration decreased with increasing dilution rate. The strains had a similar morphology at a dilution rate of 0.07 h(-1). The length of the hyphal growth unit of A3/5 increased with increase in dilution rate, while that of C106 decreased with increase in dilution rate. At all dilution rates, C106 produced up to ten times more macroconidia than A3/5.     

The application of compound bi-directional flow diffusion chemostats to the study of microbial interactions

Abstract A multi-stage bi-directional chemostat system has been developed in which solutes but not cells are allowed to diffuse between the individual growth chambers which are separated by 0.2 micron pore size polyvinyledene difluoride membranes. The experimental system enables the generation of physico-chemical gradients which, together with the spatial separation of the individual microbial processes, provides a useful laboratory model to study microbial interactions. This paper describes the construction of a multi-stage diffusion chemostat and its application in studying carbon flow in anaerobic estuarine sediments. Populations of Clostridium butyricum, Desulfovibrio desulfuricans and Chromatium vinosum were grown in the compound diffusion chemostat at a dilution rate of 0.03 h⁻¹ at 25°C, and the effects of inorganic nitrogen source and availability on carbon flow and individual cell populations were determined. C. butyricum and D. desulfuricans both used NO⁻₃ as an e⁻ acceptor with an increase in cell numbers. Under these growth conditions, free S²⁻ concentrations were lower, resulting in more stable cell populations than in comparable cultures grown on NH⁺₄ as nitrogen source.     

Methanethiol degradation in anaerobic bioreactors at elevated pH (8): reactor performance and microbial community analysis

The degradation of methanethiol (MT) at 30 degrees C under saline-alkaline (pH 8-10, 0.5M Na(+)) conditions was studied in a lab-scale Upflow Anaerobic Sludge Blanket (UASB) reactor inoculated with estuarine sediment from the Wadden Sea (The Netherlands). At a sodium concentration of 0.5M and a pH between 8 and 9 complete MT degradation to sulfide, methane and carbon dioxide was possible at a maximum loading rate of 22mmolMTL(-1)day(-1) and a hydraulic retention time of 6h. The presence of yeast extract (100mg/L) in the medium was essential for complete MT degradation. 16S rRNA based DGGE and sequence analysis revealed that species related to the genera Methanolobus and Methanosarcina dominated the archaeal community in the reactor sludge. Their relative abundance fluctuated in time, possibly as a result of the changing operational conditions in the reactor. The most dominant MT-degrading archaeon was enriched from the reactor and obtained in pure culture. This strain WR1, which was most closely related to Methanolobus taylorii, degraded MT, dimethyl sulfide (DMS), methanol and trimethylamine. Its optimal growth conditions were 0.2M NaCl, 30 degrees C and pH 8.4. In batch and reactor experiments operated at pH 10, MT was not degraded.     

Characterization of Benthic Microbial Community Structure by High-Resolution Gas Chromatography of Fatty Acid Methyl Esters

Fatty acids are a widely studied group of lipids of sufficient taxonomic diversity to be useful in defining microbial community structure. The extraordinary resolution of glass capillary gas-liquid chromatography can be utilized to separate and tentatively identify large numbers of fatty acid methyl esters derived from the lipids of estuarine detritus and marine benthic microbiota without the bias of selective methods requiring culture or recovery of the microbes. The gas-liquid chromatographic analyses are both reproducible and highly sensitive, and the recovery of fatty acids is quantitative. The analyses can be automated, and the diagnostic technique of mass spectral fragmentation analysis can be readily applied. Splitless injection on glass capillary gas chromatographic columns detected by mass spectral selective ion monitoring provides an ultrasensitive and definitive monitoring system. Reciprocal mixtures of bacteria and fungi, when extracted and analyzed, showed progressive changes of distinctive fatty acid methyl esters derived from the lipids. By manipulating the environment of an estuarine detrital microbial community with antibiotics and culture conditions, it was possible to produce a community greatly enriched in eucaryotic fungi, as evidenced by scanning electron microscopic morphology. The fatty acid methyl esters from the lipids in the fungus-enriched detritus showed enrichment of the C₁₈ dienoic and the C₁₈ and C₂₀ polyenoic esters. Manipulation of the detrital microbiota that increased the procaryotic population resulted in an absence of large structures typical of fungal mycelia or diatoms, as evidenced by scanning electron microscopy, and a significantly larger proportion of anteiso- and isobranched C₁₅ fatty acid esters, C₁₇ cyclopropane fatty acid esters, and the cis-vaccenic isomer of the C₁₈ monoenoic fatty acid esters. As determined by these techniques, a marine settling community showed greater differences in bacterial as contrasted to microeucaryotic populations when compared with the microbial communities of benthic cores.     

Effects of media composition on substrate removal by pure and mixed bacterial cultures

Continuous culture experiments with identical experimental designs were run with a mixed microbial community of activated sludge origin and an axenic bacterial culture derived from it. Each culture received 2-chlorophenol (2-CP) at a concentration of 160 mg/L as COD and L-lysine at a concentration of 65 mg/L as COD. A factorial experimental design was employed with dilution rate and media composition as the two controlled variables. Three dilution rates were studied: 0.015, 0.0325, and 0.05 h^–1. Media composition was changed by adding four biogenic compounds (butyric acid, thymine, glutamic acid and lactose) in equal COD proportions at total concentrations of 0, 34, 225, and 1462 mg/L as COD. The measured variables were the effluent concentrations of 2-CP as measured by the 4-aminoantipyrene test and lysine as measured by the o-diacetylbenzene procedure. The results suggest that community structure and substrate composition play important roles in the response of a microbial community to mixed substrates. The addition of more biogenic substrates to the axenic culture had a deleterious effect on the removal of both lysine and 2-CP, although the effect was much larger on lysine removal. In contrast, additional substrates had a positive effect on the removal of 2-CP by the mixed community and much less of a negative effect on the removal of lysine. The dilution rate at which the cultures were growing had relatively little impact on the responses to the additional substrates.Abbreviations COD chemical oxygen demand - 2-CP 2-chlorophenol - DOC dissolved organic carbon - MDL method detection limit - SS suspended solids     

High shear enrichment improves the performance of the anodophilic microbial consortium in a microbial fuel cell

In many microbial bioreactors, high shear rates result in strong attachment of microbes and dense biofilms. In this study, high shear rates were applied to enrich an anodophilic microbial consortium in a microbial fuel cell (MFC). Enrichment at a shear rate of about 120 s^?1 resulted in the production of a current and power output two to three times higher than those in the case of low shear rates (around 0.3 s^?1). Biomass and biofilm analyses showed that the anodic biofilm from the MFC enriched under high shear rate conditions, in comparison with that under low shear rate conditions, had a doubled average thickness and the biomass density increased with a factor 5. The microbial community of the former, as analysed by DGGE, was significantly different from that of the latter. The results showed that enrichment by applying high shear rates in an MFC can result in a specific electrochemically active biofilm that is thicker and denser and attaches better, and hence has a better performance.     

Lipid accumulation in an oleaginous yeast (Candida 107) growing on glucose in single-stage continuous culture.

Lipid accumulation of Candida 107, grown at dilution rates from 0.03 to the maximum of 0.21/h, with carbon, nitrogen, phosphate, and magnesium limitations in a chemostat, was maximal at about 40% (wt/wt) with nitrogen-limited medium at a dilution rate of 0.06/h, giving an efficiency of substrate conversion of 22 g of lipid per g of glucose consumed. At higher dilution rates the lipid content decreased. With carbon-limited growth, the highest lipid content (14%, wt/wt) was at the maximum dilution rate. High lipid contents also occurred with phosphate + nitrogen as double limitations of growth, with the lipid content of the yeast (about 35%, wt/wt) continuing to be near maximum at dilution rates also near maximum (0.17/h), thus giving the highest specific rate of lipid formation of any growth conditions (0.59 g of lipid/g of yeast per h). However, the efficiency of substrate utilization was only 5.2 g of lipid formed per 100 g of glucose consumed. The composition of the fatty acyl residues within the lipid remained constant over many weeks if the steady-state conditions remained unchanged. With carbon-limited growth, the degree of unsaturation of the fatty acids markedly decreased as the dilution rate was increased, but with nitrogen limitation the reverse trend was seen. In all cases, linoleic and oleic acids were the principal fatty acyl residues affected, and their relative proportions always varied in opposite directions. When magnesium was a limiting nutrient, there was a considerable increase in the proportion of myristic acid produced within the lipid. Neutral lipids (predominantly triglycerides) varied from 66 to 92% of the total lipid from carbon- and nitrogen-limited growth; phospholipids (varying from 2 to 25%) were highest in nitrogen-limited growth. The fatty acyl residues within each lipid fraction showed the same variations with changing growth rates.     

Temporal and Spatial Distribution of the Microbial Community of Winogradsky Columns

Winogradsky columns are model microbial ecosystems prepared by adding pond sediment to a clear cylinder with additional supplements and incubated with light. Environmental gradients develop within the column creating diverse niches that allow enrichment of specific bacteria. The enrichment culture can be used to study soil and sediment microbial community structure and function. In this study we used a 16S rRNA gene survey to characterize the microbial community dynamics during Winogradsky column development to determine the rate and extent of change from the source sediment community. Over a period of 60 days, the microbial community changed from the founding pond sediment population: Cyanobacteria, Chloroflexi, Nitrospirae, and Planctomycetes increased in relative abundance over time, while most Proteobacteria decreased in relative abundance. A unique, light-dependent surface biofilm community formed by 60 days that was less diverse and dominated by a few highly abundant bacteria. 67–72% of the surface community was comprised of highly enriched taxa that were rare in the source pond sediment, including the Cyanobacteria Anabaena, a member of the Gemmatimonadetes phylum, and a member of the Chloroflexi class Anaerolinea. This indicates that rare taxa can become abundant under appropriate environmental conditions and supports the hypothesis that rare taxa serve as a microbial seed bank. We also present preliminary findings that suggest that bacteriophages may be active in the Winogradsky community. The dynamics of certain taxa, most notably the Cyanobacteria, showed a bloom-and-decline pattern, consistent with bacteriophage predation as predicted in the kill-the-winner hypothesis. Time-lapse photography also supported the possibility of bacteriophage activity, revealing a pattern of colony clearance similar to formation of viral plaques. The Winogradsky column, a technique developed early in the history of microbial ecology to enrich soil microbes, may therefore be a useful model system to investigate both microbial and viral ecology.     

Osmotic Stress Response: Quantification of Cell Maintenance and Metabolic Fluxes in a Lysine-Overproducing Strain of Corynebacterium glutamicum

Osmotic stress diminishes cell productivity and may cause cell inactivation in industrial fermentations. The quantification of metabolic changes under such conditions is fundamental for understanding and describing microbial behavior during bioprocesses. We quantified the gradual changes that take place when a lysine-overproducing strain of Corynebacterium glutamicum is grown in continuous culture with saline gradients at different dilution rates. The use of compatible solutes depended on environmental conditions; certain osmolites predominated at different dilution rates and extracellular osmolalities. A metabolic flux analysis showed that at high dilution rates C. glutamicum redistributed its metabolic fluxes, favoring energy formation over growth. At low dilution rates, cell metabolism accelerated as the osmolality was steadily increased. Flexibility in the oxaloacetate node proved to be key for the energetic redistribution that occurred when cells were grown at high dilution rates. Substrate and ATP maintenance coefficients increased 30- and 5-fold, respectively, when the osmolality increased, which demonstrates that energy pool management is fundamental for sustaining viability.     

Degradation of Methanethiol by Methylotrophic Methanogenic Archaea in a Lab-Scale Upflow Anaerobic Sludge Blanket Reactor

In a lab-scale upflow anaerobic sludge blanket reactor inoculated with granular sludge from a full-scale wastewater treatment plant treating paper mill wastewater, methanethiol (MT) was degraded at 30°C to H₂S, CO₂, and CH₄. At a hydraulic retention time of 9 h, a maximum influent concentration of 6 mM MT was applied, corresponding to a volumetric loading rate of 16.5 mmol liter⁻¹ day⁻¹. The archaeal community within the reactor was characterized by anaerobic culturing and denaturing gradient gel electrophoresis analysis, cloning, and sequencing of 16S rRNA genes and quantitative PCR. Initially, MT-fermenting methanogenic archaea related to members of the genus Methanolobus were enriched in the reactor. Later, they were outcompeted by Methanomethylovorans hollandica, which was detected in aggregates but not inside the granules that originated from the inoculum, the microbial composition of which remained fairly unchanged. Possibly other species within the Methanosarcinacaea also contributed to the fermentation of MT, but they were not enriched by serial dilution in liquid media. The archaeal community within the granules, which was dominated by Methanobacterium beijingense, did not change substantially during the reactor operation. Some of the species related to Methanomethylovorans hollandica were enriched by serial dilutions, but their growth rates were very low. Interestingly, the enrichments could be sustained only in the presence of MT and did not utilize any of the other typical substrates for methylotrophic methanogens, such as methanol, methyl amine, or dimethylsulfide.