Biosynthesis of inositol in yeast. Primary structure of myo-inositol-1-phosphate synthase (EC 5.5.1.4) and functional analysis of its structural gene, the INO1 locus

A biochemical, molecular, and genetic analysis of the Saccharomyces cerevisiae INO1 gene and its product, L-myo-inositol-1-phosphate synthase (EC 5.5.1.4) has been carried out. The sequence of the entire INO1 gene and surrounding regions has been determined. Computer analysis of the DNA sequence revealed four potential peptides. The largest open reading frame of 553 amino acids predicted a peptide with a molecular weight of 62,842. The amino acid composition and amino terminus of purified L-myo-inositol-1-phosphate synthase were chemically determined and compared to the amino acid composition and amino terminus of the protein predicted from the DNA sequence of the large open reading frame. This analysis established that the large open reading frame encodes L-myo-inositol-1-phosphate synthase. The largest of several small open reading frames adjacent to INO1 predicted a protein of 133 amino acids with a molecular weight of 15,182 and features which suggested that the encoded protein may be membrane-associated. A gene disruption was constructed at INO1 by eliminating a portion of the coding sequence and replacing it with another sequence. Strains carrying the gene disruption failed to express any protein cross-reactive to antibody directed against L-myo-inositol-1-phosphate synthase. Although auxotrophic for inositol, strains carrying the gene disruption were completely viable when supplemented with inositol. In a similar fashion, a gene disruption was constructed in the chromosomal locus of the 133-amino acid open reading frame. This mutation did not affect viability but did cause inositol to be excreted from the cell.     

Nucleotide sequence of the glucoamylase gene GLU1 in the yeast Saccharomycopsis fibuligera.

The complete nucleotide sequence of the glucoamylase gene GLU1 from the yeast Saccharomycopsis fibuligera has been determined. The GLU1 DNA hybridized to a polyadenylated RNA of 2.1 kilobases. A single open reading frame codes for a 519-amino-acid protein which contains four potential N-glycosylation sites. The putative precursor begins with a hydrophobic segment that presumably acts as a signal sequence for secretion. Glucoamylase was purified from a culture fluid of the yeast Saccharomyces cerevisiae which had been transformed with a plasmid carrying GLU1. The molecular weight of the protein was 57,000 by both gel filtration and acrylamide gel electrophoresis. The protein was glycosylated with asparagine-linked glycosides whose molecular weight was 2,000. The amino-terminal sequence of the protein began from the 28th amino acid residue from the first methionine of the putative precursor. The amino acid composition of the purified protein matched the predicted amino acid composition. These results confirmed that GLU1 encodes glucoamylase. A comparison of the amino acid sequence of glucoamylases from several fungi and yeast shows five highly conserved regions. One homology region is absent from the yeast enzyme and so may not be essential to glucoamylase function.     

Overexpression and Purification of Asparagine Synthetase from Escherichia coli

Overexpression of the asnA gene from Escherichia coli K-12 coding for asparagine synthetase (EC 6.3.1.1) was achieved with a plasmid, pUNAd37, a derivative of pUCI8, in E. coli. The plasmid was constructed by optimizing a DNA sequence between the promoter and the ribosome binding region. The enzyme, comprising ca. 15%, of the total soluble protein in the E. coli cell, was readily purified to apparent homogeneity by DEAE-Cellulofine and Blue-Cellulofine column chromatographies. The amino-terminal sequence, amino acid composition, and molecular weight of the purified protein agreed with the predicted values based on the DNA sequence of the gene. Furthermore the native molecular weight measured by gel filtration confirmed that asparagine synthetase exists as a dimer of identical subunits.     

Overexpression and purification of asparagine synthetase from Escherichia coli.

Overexpression of the asnA gene from Escherichia coli K-12 coding for asparagine synthetase (EC 6.3.1.1) was achieved with a plasmid, pUNAd37, a derivative of pUC18, in E. coli. The plasmid was constructed by optimizing a DNA sequence between the promoter and the ribosome binding region. The enzyme, comprising ca. 15% of the total soluble protein in the E. coli cell, was readily purified to apparent homogeneity by DEAE-Cellulofine and Blue-Cellulofine column chromatographies. The amino-terminal sequence, amino acid composition, and molecular weight of the purified protein agreed with the predicted values based on the DNA sequence of the gene. Furthermore the native molecular weight measured by gel filtration confirmed that asparagine synthetase exists as a dimer of identical subunits.     

The primary structure of Escherichia coli K12 2-deoxyribose 5-phosphate aldolase. Nucleotide sequence of the deoC gene and the amino acid sequence of the enzyme

The sequence of the deoC gene of Escherichia coli K12 and the amino acid sequence of the corresponding protein, deoxyriboaldolase, has been established. The protein consists of 259 amino acids with a molecular weight of 27 737. The purified enzyme may exist both as a monomer and as a dimer. On the basis of amino acid composition, molecular weight and catalytic properties, the enzymes from E. coli and Salmonella typhimurium seem to be almost similar. They belong to the class I aldolases, which form Schiff base intermediates. Using data for the S. typhimurium enzyme, the lysine residue involved in the active site in the E. coli enzyme was tentatively identified.     

Bacteriophage P22 Cro protein: sequence, purification, and properties

The DNA sequence of part of the bacteriophage P22 early regulatory region, including genes cro and c1, was determined. The protein product of the cro gene consists of 61 amino acid residues, and that of c1, 92 amino acid residues. Both genes were placed separately in plasmids from which they are expressed from a controllable promoter in vivo. Induced cells bearing the cro-expressing plasmid were used as a source for purifying and characterizing the Cro protein. The amino-terminal sequence of this protein was found to be as predicted by the DNA sequence; close agreement was also observed between its predicted and experimentally determined amino acid composition and molar extinction coefficient at 280 nm. In gel filtration experiments, Cro protein at concentrations around 10(-5) M appears to have a molecular weight of 8600, which is more consistent with monomers (6800) than with dimers (13 600). Cro protein binds specifically to the three repressor binding sites in the P22 right operator; in order of decreasing affinity, these are OR3, OR1, and OR2.     

Nucleotide sequence of the luxB gene of Vibrio harveyi and the complete amino acid sequence of the beta subunit of bacterial luciferase

The nucleotide sequence of the 1.30-kilobase EcoRI/BglII fragment from Vibrio harveyi carrying the majority of the luciferase beta subunit coding region (luxB gene) has been determined. The EcoRI/BglII fragment was derived from a 4.0-kilobase HindIII fragment carrying both luxA and luxB which was detected in a genomic clone bank based on the expression of bioluminescence from colonies of Escherichia coli carrying V. harveyi HindIII fragments in plasmid pBR322 (Baldwin, T. O., Berends, T., Bunch, T. A., Holzman, T. F., Rausch, S. K., Shamansky, L., Treat, M. L., and Ziegler, M. M. (1984) Biochemistry 23, 3663-3667). The entire alpha subunit coding sequence (luxA gene) and the amino-terminal 13 codons of the beta subunit sequence (luxB gene) were contained on a 1.85-kilobase EcoRI fragment, the sequence of which has been reported (Cohn, D. H., Mileham, A. J., Simon, M. I., Nealson, K. H., Rausch, S. K., Bonam, D., and Baldwin, T. O. (1985) J. Biol. Chem. 260, 6139-6146). The beta subunit coding sequence was found to terminate 972 bases past the start of the luxB coding sequence. The beta subunit had a calculated molecular weight of 36,349 and comprised a total of 324 amino acid residues; the alpha beta dimer had a molecular weight (alpha + beta) of 76,457. There were 27 base pairs separating the stop codon of the beta subunit structural gene and a 340-base open reading frame extending to (and beyond) the distal BglII site. Approximately two-thirds of the beta subunit was sequenced by protein chemical techniques. The amino acid sequence predicted from the DNA sequence, with few exceptions, confirmed the chemically determined sequence, and the measured amino acid composition was in excellent agreement with the composition implied from the DNA sequence.     

Histidinoalanine, a naturally occurring cross-link derived from phosphoserine and histidine residues in mineral-binding phosphoproteins

Native mineral-containing phosphoprotein particles were isolated from the Heterodont bivalve Macrocallista nimbosa. The native particles are discrete structures about 40 nm in diameter which migrate as a single band during electrophoresis in agarose gels. Removal of the mineral component with ethylenediaminetetraacetic acid dissociates the native protein into nonidentical subunits. The lower molecular weight subunits, representing 8% of the total protein, were obtained by differential centrifugation. The native protein is characterized by a high content of aspartic acid, phosphoserine, phosphothreonine, histidine, and the bifunctional cross-linking residue histidinoalanine. The low molecular weight subunits have the same amino acid composition except for a reduction in histidinoalanine and a corresponding increase in phosphoserine and histidine residues, demonstrating that the alanine portion of the cross-link is derived from phosphoserine residues. Ion-exchange chromatography and molecular sieve chromatography show that the low molecular weight subunits have a similar charge density but differ in molecular weight, and the relative mobilities of the subunits on agarose gels indicate that they are polymers of a single phosphoprotein molecule. The minimum molecular weight of the monomer is about 140 000 on the basis of the amino acid composition. The high molecular weight subunits are rich in histidinoalanine and too large to be resolved by either molecular sieve chromatography or gel electrophoresis. On the basis of the ultrastructural, electrophoretic, chromatographic, and compositional evidence, native phosphoprotein particles are composed of subunits ionically cross-linked via divalent cations. These subunits are variable molecular weight aggregates of a single phosphoprotein molecule covalently cross-linked via histidinoalanine residues. Evidence for a nonenzymatic cross-linking mechanism is discussed.     

The valyl-tRNA synthetase from Bacillus stearothermophilus has considerable sequence homology with the isoleucyl-tRNA synthetase from Escherichia coli

We report the DNA sequence of the valS gene from Bacillus stearothermophilus and the predicted amino acid sequence of the valyl-tRNA synthetase encoded by the gene. The predicted primary structure is for a protein of 880 amino acids with a molecular mass of 102,036. The molecular mass and amino acid composition of the expressed enzyme are in close agreement with those values deduced from the DNA sequence. Comparison of the predicted protein sequence with known protein sequences revealed a considerable homology with the isoleucyl-tRNA synthetase of Escherichia coli. The two enzymes are identical in some 20-25% of their amino acid residues, and the homology is distributed approximately evenly from N-terminus to C-terminus. There are several regions which are highly conservative between the valyl- and isoleucyl-tRNA synthetases. In one of these regions, 15 of 20 amino acids are identical, and in another, 10 of 14 are identical. The valyl-tRNA synthetase also contains a region HLGH (His-Leu-Gly-His) near its N-terminus equivalent to the consensus HIGH (His-Ile-Gly-His) sequence known to participate in the binding of ATP in the tyrosyl-tRNA synthetase. This is the first example of extensive homology found between two different aminoacyl-tRNA synthetases.     

Cloning and nucleotide sequence of the aspartase gene of Escherichia coli W.

The aspA gene of Escherichia coli W which encodes aspartase was cloned into the plasmid vector pBR322. The nucleotide sequences of aspA and its flanking regions were determined. The aspA gene encodes a protein with a molecular weight of 52,224 consisted of 477 amino acid residues. The amino acid sequence of the protein predicted from the nucleotide sequence was consistent with those of the NH2- and COOH-terminal regions and also with the amino acid composition of the purified aspartase determined previously. Potential promoter and terminator sequences for aspA were also found in the determined sequence.     

The Nu1 subunit of bacteriophage lambda terminase

The maturation and packaging of bacteriophage lambda DNA are catalyzed by the phage terminase enzyme. Terminase is composed of two protein subunits, gpNu1 and gpA. The holoenzyme is multifunctional in vitro; it binds to and cleaves lambda DNA at the cos site (where cos represents cohesive-end site), packages DNA into lambda proheads, and is also a DNA-dependent ATPase. The genes of the two subunits have been cloned separately into powerful expression vectors which allow for very high levels of protein overproduction. The gpNu1 protein has been purified to homogeneity and has a monomeric molecular weight of 21,200, in close agreement with the Mr of 20,444 expected from its amino acid sequence. Both gel filtration and sedimentation velocity centrifugation indicate that the native gpNu1 protein exists as a Mr greater than 500,000 aggregate. The sequence of the first 20 amino acids and the overall composition both match those predicted by the nucleotide sequence of the Nu1 gene. Purified gpNu1 is able to complement gpA-containing extracts in both lambda DNA packaging and cos cleavage assays. The Nu1 gene amino acid sequence predicts DNA binding by the protein, and gpNu1 does show specific binding to lambda DNA by filter binding assays. Also, as predicted from its sequence, gpNu1 exhibits ATPase activity; but in contrast to the holoenzyme, this activity is DNA-independent.     

The nucleotide and partial amino acid sequence of toxic shock syndrome toxin-1

The nucleotide sequence of toxic shock syndrome toxin-1 (TSST-1) has been determined. In addition, one-third of the predicted amino acid sequence was confirmed by amino acid sequence analysis of cyanogen bromide-generated TSST-1 protein fragments. The DNA sequencing results identified a 708-base pair open reading frame starting with an ATG, 7 base pairs downstream from a Shine-Dalgarno sequence, and terminating at a UAA stop codon. Amino acid analysis of the intact protein defined the NH2 terminus of the mature protein and located the cleavage point for the signal peptide (Ala/Ser). The signal peptide contained the first 40 amino acids and had characteristic structural similarities with other bacterial signal peptides. The coding sequence of the mature protein was 585 base pairs (194 amino acids) in length, and the molecular weight of the predicted protein was 22,049. This is in good agreement with the previously reported molecular weight of TSST-1 (22,000), as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. NH2-terminal amino acid sequence analysis performed on isolated TSST-1 CNBr fragments determined the position of the peptides in the TSST-1 sequence and verified the predicted amino acid sequence in those positions. Computer analyses of the amino acid sequence showed that TSST-1 has little or no sequence homology with biologically related toxins, streptococcal pyrogenic exotoxin A, and staphylococcal enterotoxins B and C.     

Cloning and nucleotide sequence of a gene for Actinomyces naeslundii WVU45 type 2 fimbriae.

A genomic library of Actinomyces naeslundii WVU45 DNA in Escherichia coli was screened for antigen expression with rabbit antibody against A. naeslundii fimbriae. Western blotting (immunoblotting) of one recombinant clone carrying a 13.8-kilobase-pair insert revealed a 59-kilodalton (kDa) immunoreactive protein. A protein of similar electrophoretic mobility was detected from the isolated fimbrial antigen. Expression of the 59-kDa cloned protein in E. coli was directed by a promoter from the insert. The DNA sequence of the subunit gene was determined, and an open reading frame of 1,605 nucleotides was identified which was preceded by a putative ribosome-binding site and followed by two inverted repeats of 14 and 17 nucleotides, respectively. The reading frame encoded a protein of 534 amino acids (calculated molecular weight, 57,074), and the N-terminal sequence resembled that of a signal peptide. The presence of a 32-amino-acid signal peptide was indicated by amino-terminal sequencing of the fimbriae from A. naeslundii. The sequence, as determined by Edman degradation, was identical to that deduced from the DNA sequence beginning at predicted residue 33 of the latter sequence. Moreover, the amino acid composition of the predicted mature protein was similar to that of the isolated fimbriae from A. naeslundii. Thus, the cloned gene encodes a subunit of A. naeslundii fimbriae.     

Nucleotide sequence analysis of the Pseudomonas putida PpG7 salicylate hydroxylase gene (nahG) and its 3'-flanking region

Gene nahG of naphthalene/salicylate catabolic plasmid NAH7 encodes a protein of molecular weight 45,000, salicylate hydroxylase. This enzyme catalyzes the formation of catechol from salicylate, a key intermediate in naphthalene catabolism. DNA sequence analysis of the 3.1-kilobase HindIII fragment containing the nahG locus reveals an open reading frame (ORF) of 1305 base pairs that corresponds to a protein of 434 amino acid residues. The predicted amino acid sequence of salicylate hydroxylase is in agreement with the molecular weight, NH2-terminal amino acid sequence, and total amino acid composition of the purified salicylate hydroxylase [You, I.-S., Murray, R. I., Jollie, D., & Gunsalus, I. C. (1990) Biochem. Biophys. Res. Commun. 169, 1049-1054]. The amino acid sequence between positions 8 and 37 of salicylate hydroxylase shows homology with known ADP binding sites of other FAD-containing oxidoreductases, thus confirming its biochemical function. The sequence of the Pseudomonas putida salicylate hydroxylase was compared with those of other similar flavoproteins. A small DNA segment (831 base pairs) disrupts the continuity of the known gene order nahG and nahH, the latter encoding catechol 2,3-dioxygenase. The complete nucleotide sequence of the intergenic region spanning genes nahG and nahH has been determined and its biological role proposed.     

Isolation and sequencing of cDNA clones encoding alpha and beta subunits of Drosophila melanogaster casein kinase II.

Cloned cDNAs encoding both subunits of Drosophila melanogaster casein kinase II have been isolated by immunological screening of lambda gt11 expression libraries, and the complete amino acid sequence of both polypeptides has been deduced by DNA sequencing. The alpha cDNA contained an open reading frame of 336 amino acid residues, yielding a predicted molecular weight for the alpha polypeptide of 39,833. The alpha sequence contained the expected semi-invariant residues present in the catalytic domain of previously sequenced protein kinases, confirming that it is the catalytic subunit of the enzyme. Pairwise homology comparisons between the alpha sequence and the sequences of a variety of vertebrate protein kinase suggested that casein kinase II is a distantly related member of the protein kinase family. The beta subunit was derived from an open reading frame of 215 amino acid residues and was predicted to have a molecular weight of 24,700. The beta subunit exhibited no extensive homology to other proteins whose sequences are currently known.     

Sequence of the T4 recombination gene, uvsX, and its comparison with that of the recA gene of Escherichia coli.

We have determined the nucleotide sequence of the uvsX gene of bacteriophage T4 which is involved in DNA recombination and damage repair, and whose product catalyzes in vitro reactions related to recombination process in analogous manners to E. coli recA gene product. The coding region consisted of 1170 nucleotides directing the synthesis of a polypeptide of 390 amino acids in length with a calculated molecular weight of 43,760. Amino acid composition, the sequence of seven NH2-terminal amino acids and molecular weight of the protein deduced from the nucleotide sequence were consistent with the data from the analysis of the purified uvsX protein. The nucleotide sequence and the deduced amino acid sequence were compared with those of the recA gene. Although a significant homology was not found in the nucleotide sequences, the amino acid sequences included 23% of identical and 15% of conservatively substituted residues.     

The amino acid sequence of thiogalactoside transacetylase of Escherichia coli

The amino acid sequence of thiogalactoside transacetylase, a dimer, has been determined. The monomer contains 202 amino acid residues in a single polypeptide chain and has a molecular weight of 22,671. The analysis was carried out by treatment of the carboxymethylated protein with cyanogen bromide and with trypsin. All seven cyanogen bromide peptides were isolated in pure form and were ordered by peptides isolated from tryptic digests. The sequence analysis was aided by determination of the DNA sequence of the lacA gene. The amino terminus of the protein is heterogenous because the initiator methionine is only partially cleaved. Another rather unusual feature of this cytoplasmic protein is a very hydrophobic segment in the center portion of the chain. Comparison of the amino acid sequence of thiogalactoside transacetylase to those of the lac repressor, beta-galactosidase, and lactose permease did not reveal any marked similarities. Therefore, there is no obvious evolutionary relatedness among proteins of the Lactose Operon.     

Cloning, expression and sequencing the molybdenum-pterin binding protein (mop) gene of Clostridium pasteurianum in Escherichia coli

mop is the structural gene for the molybdenum-pterin binding protein, which is the major molybdenum binding protein in Clostridium pastuerianum. The mop gene was detected by immunoscreening genomic libraries of C. pastuerianum and identified by determining the nucleotide sequence of the cloned insert of clostridial DNA. The deduced amino acid sequence of an open reading frame proved to be identical to the first twelve residues of purified Mop. The DNA sequence flanking the mop gene contains promoter-like consensus sequences which are probably responsible for the expression of Mop in Escherichia coli. The deduced amino acid composition shows that the protein is hydrophobic, lacks aromatic and cysteine residues and has a calculated molecular weight of 7,038. The N-terminal amino acid sequence of Mop has sequence homology with DNA binding proteins. The pattern and type of residues in the N-terminal region suggest it forms the helix-turn-helix structure observed in DNA binding proteins. We propose that Mop may be a regulatory protein binding the anabolic source of molybdenum.