How to map ses, a mutant of Arabidopsis thaliana affecting pollen development

In Arabidopsis, map-based cloning has been developed to an effective method in mutant genetic analysis because high-density markers are available, candidate genes or genomic sequences can be amplified by PCR, and transgenic techniques are simplified. Mutant ses named from shortened early-stage siliques was used as an example to show how to map a mutant in this way. By the process of bulked segregants analysis, linkage testing, large-scale and fine-scale mapping, mutant ses was narrowed into a 67 kb interval from CER448792 (2000541 bp) to CER464544 (2067844 bp) crossing over the right of BAC F12K11 to the left of the BAC F4H5 including at most 22 putative genes on the top of chromosome 1. In sequence-based map of Arabidopsis genes with mutant phenotype (SMAGMP) mutant ses was between AT1g06150 (EMB1444) and AT1g08060 (MOM). The ses mapping also showed that developed markers on polymorphism site of CAPC not only were simplified but worked well. Twenty-four markers from CAPC used in the mapping maybe help Arabidopsis researchs with others and the methods related to ses mapping also gave an example of positional cloning. The text was submitted by the authors in English.     

A platform of high‐density INDEL/CAPS markers for map‐based cloning in Arabidopsis

Map‐based cloning has been widely used to identify genes responsible for mutant phenotypes in Arabidopsis, especially those mutants generated by EMS or fast neutron mutagenesis. The success of map‐based cloning relies on the availability of molecular markers that distinguish the polymorphisms between two Arabidopsis ecotypes. So far, most molecular markers in Arabidopsis have been generated by individual laboratories or the Arabidopsis Information Resource (TAIR). However, the TAIR markers, which are distributed unevenly on the five Arabidopsis chromosomes, only cover approximately 25% of the Arabidopsis BACs. Designing and testing molecular markers is still a time‐consuming endeavor. Here we report the construction of a high‐resolution BAC‐based Arabidopsis mapping platform (AMP), using Col‐0 and Ler as model ecotypes. The AMP comprises 1346 markers (1073 INDEL and 273 CAPS/dCAPS markers), of which 971 were newly designed and experimentally confirmed, 179 were from published papers and 196 were TAIR markers. These AMP markers cover 1186 BACs, 1121 of which are in non‐centromere regions, representing approximately 75% of the Arabidopsis BACs in non‐centromere regions. All the marker information is included on the AMP website ( http://amp.genomics.org.cn/ ) for easy access and download, and sets of standard markers for initial chromosomal localization of a particular gene are recommended. The feasibility of using the AMP to map mutated genes is also discussed.     

A genetic interval and physical contig spanning the Peronospora parasitica (At) avirulence gene locus ATR1Nd

In Peronospora parasitica (At) (downy mildew), the genetic determinants of cultivar-specific recognition by Arabidopsis thaliana are the Arabidopsis thaliana-recognised (ATR) avirulence genes. We describe the identification of 10 amplified fragment length polymorphism (AFLP) markers that define a genetic mapping interval for the ATR1Nd avirulence allele, the presence of which is perceived by the RPP1Nd resistance gene. Furthermore, we have constructed a P. parasitica (At) bacterial artificial chromosome (BAC) library comprising over 630Mb of cloned DNA. We have isolated 16 overlapping clones from the BAC library that form a contig spanning the genetic interval. BAC sequence-derived markers and a total mapping population of 311 F(2) individuals were used to refine the ATR1Nd locus to a 1cM interval that is represented by four BAC clones and spans less than 250kb of DNA. This work demonstrates that map-based cloning techniques are feasible in this organism and provides the critical foundations for cloning ATR1Nd using such a strategy.     

Genetic mapping of mutations using phenotypic pools and mapped RAPD markers.

Genetic markers facilitate the study of inheritance and the cloning of genes by genetic approaches. Molecular markers detect differences in DNA sequence, and are thus less ambiguous than phenotypic markers, which require gene expression. We have demonstrated a molecular approach to the mapping of mutant genes using RAPD markers and pooling of individuals based on phenotype. To map genes by phenotypic pooling a strain carrying a mutation is crossed to a strain that is homozygous for the wild-type allele of the corresponding gene. A set of primers corresponding to mapped RAPDs distributed throughout the genome and in coupling phase with respect to the wild type parent is then used to amplify DNA from wild type and mutant pools of F2 individuals. Linkage between the mutant gene and the RAPD markers is visualized by the absence of the corresponding RAPD DNA bands in the mutant pool. We developed a mathematical model for calculating the probability of linkage between RAPDs and target genes and we successfully tested this approach with the model plant Arabidopsis thaliana.     

A physical map of the 20q12-q13.1 region associated with type 2 diabetes

Several recent genetic studies have suggested linkage of Type 2 diabetes (non-insulin-dependent diabetes mellitus) susceptibility to a region of chromosome 20q12-q13.1. To facilitate the identification and cloning of a diabetes susceptibility gene(s) in this region, we have constructed correlated radiation hybrid and YAC/BAC contig physical maps of the region. A high-resolution radiation hybrid map encompassing 9.5 Mb between the PLC and the CEBPB genes was constructed using 68 markers: 25 polymorphic markers, 15 known genes, 21 ESTs, and 7 random genomic sequences. The physical order of the polymorphic markers within this radiation hybrid map is consistent with published genetic maps. A YAC/BAC contig that gives continuous coverage between PLC and CEBPB was also constructed. This contig was constructed from 24 YACs, 34 BACs, and 1 P1 phage clone onto which 71 markers were mapped: 23 polymorphic markers, 12 genes, 24 ESTs, and 12 random genomic sequences. The radiation hybrid map and YAC/BAC physical map enable precise mapping of newly identified transcribed sequences and polymorphic markers that will aid in linkage and linkage disequilibrium studies and facilitate identification and cloning of candidate Type 2 diabetes susceptibility genes residing in 20q12-q13.1.     

Exploitation of Arabidopsis-tomato synteny to construct a high-resolution map of the ovatecontaining region in tomato chromosome 2.

High-resolution genetic and physical maps were constructed for the region of chromosome 2 containing the major fruit-shape locus ovate. A total of 3,000 NIL F2 and F3 NILs derived from Lycopersicon esculentum cv. Yellow Pear (TA503) x L. pennellii (a wild tomato) were used to position ovate adjacent to the marker TG645 and flanked by markers TX700 and BA10R (a 0.03-cM interval). BAC libraries and a BIBAC library were screened with the closest marker, TG645. Genetic mapping with the ends of isolated BAC clones revealed that two BAC clones (100 and 140 kb) both contained the ovate locus. Screening of sequences from these BAC clones revealed synteny between this segment of tomato chromosome 2 and the chromosome-4 region of Arabidopsis containing the BAC clone ATAP22. Microsynteny between the two genomes was exploited to find additional markers near the ovate locus. The placement of ovate on a BAC clone will now allow cloning of this locus and, hence, may open the door to understanding the molecular basis of fruit development and also facilitate the genetic engineering of fruit-shape characteristics. This also represents the first time that microsynteny with Arabidopsis has been exploited for positional cloning purposes in a different plant family.     

Arabidopsis map-based cloning in the post-genome era

Map-based cloning is an iterative approach that identifies the underlying genetic cause of a mutant phenotype. The major strength of this approach is the ability to tap into a nearly unlimited resource of natural and induced genetic variation without prior assumptions or knowledge of specific genes. One begins with an interesting mutant and allows plant biology to reveal what gene or genes are involved. Three major advances in the past 2 years have made map-based cloning in Arabidopsis fairly routine: sequencing of the Arabidopsis genome, the availability of more than 50,000 markers in the Cereon Arabidopsis Polymorphism Collection, and improvements in the methods used for detecting DNA polymorphisms. Here, we describe the Cereon Collection and show how it can be used in a generic approach to mutation mapping in Arabidopsis. We present the map-based cloning of the VTC2 gene as a specific example of this approach.     

Two broad-spectrum blast resistance genes,<Emphasis Type="Italic"> Pi9</Emphasis>(<Emphasis Type="Italic">t</Emphasis>) and<Emphasis Type="Italic"> Pi2</Emphasis>(<Emphasis Type="Italic">t</Emphasis>), are physically linked on rice chromosome 6

To understand the molecular basis of broad-spectrum resistance to rice blast, fine-scale mapping of the two blast resistance (R) genes, Pi9( t) and Pi2( t), was conducted. These two genes were introgressed from different resistance donors, previously reported to confer resistance to many blast isolates in the Philippines, and were mapped to an approximately 10-cM interval on chromosome 6. To further test their resistance spectrum, 43 blast isolates collected from 13 countries were used to inoculate the Pi2( t) and Pi9( t) plants. Pi9( t)-bearing lines were highly resistant to all isolates tested, and lines carrying Pi2( t) were resistant to 36 isolates, confirming the broad-spectrum resistance of these two genes to diverse blast isolates. Three RAPD markers tightly linked to Pi9( t) were identified using the bulk segregant analysis technique. Twelve positive bacterial artificial chromosome (BAC) clones were identified and a BAC contig covering about 100 kb was constructed when the Pi9( t) BAC library was screened with one of the markers. A high-resolution map of Pi9( t) was constructed using BAC ends. The Pi2( t) gene was tightly linked to all of the Pi9( t) markers in 450 F(2) plants. These data suggest that Pi9( t) and Pi2( t) are either allelic or tightly linked in an approximately 100-kb region. The mapping results for Pi9( t) and Pi2( t) provide essential information for the positional cloning of these two important blast resistance genes in rice.     

BAC-derived markers converted from RFLP linked to Phytophthora capsici resistance in pepper (Capsicum annuum L.)

Phytophthora capsici Leonian, an oomycete pathogen, is a serious problem in pepper worldwide. Its resistance in pepper is controlled by quantitative trait loci (QTL). To detect QTL associated with P. capsici resistance, a molecular linkage map was constructed using 100 F(2) individuals from a cross between Capsicum annuum 'CM334' and C. annuum 'Chilsungcho'. This linkage map consisted of 202 restriction fragment length polymorphisms (RFLPs), 6 WRKYs and 1 simple sequence repeat (SSR) covering 1482.3 cM, with an average interval marker distance of 7.09 cM. QTL mapping of Phytophthora root rot and damping-off resistance was performed in F(2:3) originated from a cross between resistant Mexican landrace C. annuum 'CM334' and susceptible Korean landrace C. annuum 'Chilsungcho' using composite interval mapping (CIM) analysis. Four QTL explained 66.3% of the total phenotypic variations for root rot resistance and three 44.9% for damping-off resistance. Of these QTL loci, two were located close to RFLP markers CDI25 on chromosome 5 (P5) and CT211A on P9. A bacterial artificial chromosome (BAC) library from C. annuum 'CM334' was screened with these two RFLP probes to obtain sequence information around the RFLP marker loci for development of PCR-based markers. CDI25 and CT211 probes identified seven and eight BAC clones, respectively. Nine positive BAC clones containing probe regions were sequenced and used for cytogenetic analysis. One single-nucleotide amplified polymorphism (SNAP) for the CDI25 locus, and two SSRs and cleaved amplified polymorphic sequence (CAPS) for CT211 were developed using sequences of the positive BAC clones. These markers will be valuable for rapid selection of genotypes and map-based cloning for resistance genes against P. capsici.     

A radiation hybrid map of chicken Chromosome 4

The mapping resolution of the physical map for chicken Chromosome 4 (GGA4) was improved by a combination of radiation hybrid (RH) mapping and bacterial artificial chromosome (BAC) mapping. The ChickRH6 hybrid panel was used to construct an RH map of GGA4. Eleven microsatellites known to be located on GGA4 were included as anchors to the genetic linkage map for this chromosome. Based on the known conserved synteny between GGA4 and human Chromosomes 4 and X, sequences were identified for the orthologous chicken genes from these human chromosomes by BLAST analysis. These sequences were subsequently used for the development of STS markers to be typed on the RH panel. Using a logarithm of the odds (LOD) threshold of 5.0, nine linkage groups could be constructed which were aligned with the genetic linkage map of this chromosome. The resulting RH map consisted of the 11 microsatellite markers and 50 genes. To further increase the number of genes on the map and to provide additional anchor points for the physical BAC map of this chromosome, BAC clones were identified for 22 microsatellites and 99 genes. The combined RH and BAC mapping approach resulted in the mapping of 61 genes on GGA4 increasing the resolution of the chicken–human comparative map for this chromosome. This enhanced comparative mapping resolution enabled the identification of multiple rearrangements between GGA4 and human Chromosomes 4q and Xp.     

Molecular map of the Chlamydomonas reinhardtii nuclear genome

We have prepared a molecular map of the Chlamydomonas reinhardtii genome anchored to the genetic map. The map consists of 264 markers, including sequence-tagged sites (STS), scored by use of PCR and agarose gel electrophoresis, and restriction fragment length polymorphism markers, scored by use of Southern blot hybridization. All molecular markers tested map to one of the 17 known linkage groups of C. reinhardtii. The map covers approximately 1,000 centimorgans (cM). Any position on the C. reinhardtii genetic map is, on average, within 2 cM of a mapped molecular marker. This molecular map, in combination with the ongoing mapping of bacterial artificial chromosome (BAC) clones and the forthcoming sequence of the C. reinhardtii nuclear genome, should greatly facilitate isolation of genes of interest by using positional cloning methods. In addition, the presence of easily assayed STS markers on each arm of each linkage group should be very useful in mapping new mutations in preparation for positional cloning.     

A first generation physical map of the medaka genome in BACs essential for positional cloning and clone-by-clone based genomic sequencing

In order to realize the full potential of the medaka as a model system for developmental biology and genetics, characterized genomic resources need to be established, culminating in the sequence of the medaka genome. To facilitate the map-based cloning of genes underlying induced mutations and to provide templates for clone-based genomic sequencing, we have created a first-generation physical map of the medaka genome in bacterial artificial chromosome (BAC) clones. In particular, we exploited the synteny to the closely related genome of the pufferfish, Takifugu rubripes, by marker content mapping. As a first step, we clustered 103,144 public medaka EST sequences to obtain a set of 21,121 non-redundant sequence entities. Avoiding oversampling of gene-dense regions, 11,254 of EST clusters were successfully matched against the draft sequence of the fugu genome, and 2363 genes were selected for the BAC map project. We designed 35mer oligonucleotide probes from the selected genes and hybridized them against 64,500 BAC clones of strains Cab and Hd-rR, representing 14-fold coverage of the medaka genome. Our data set is further supplemented with 437 results generated from PCR-amplified inserts of medaka cDNA clones and BAC end-fragment markers. Our current, edited, first generation medaka BAC map consists of 902 map segments that cover about 74% of the medaka genome. The map contains 2721 markers. Of these, 2534 are from expressed sequences, equivalent to a non-redundant set of 2328 loci. The 934 markers (724 different) are anchored to the medaka genetic map. Thus, genetic map assignments provide immediate access to underlying clones and contigs, simplifying molecular access to candidate gene regions and their characterization.     

拟南芥AST基因的精细作图

拟南芥(Arabidopsis thaliana(L.)Heynh.)ast(anthocyanin spottedtesta)突变体是由碳离子辐射诱导产生的与花青苷生物合成有关的基因突变体,受单隐性核基因控制.根据拟南芥数据库中的SNPs(single nucleotide polv-mophisms)序列和插入/缺失多态性(insertion/deletion polymorphisms)序列,设计了一系列分子标记.采用图位克隆策略,应用这些分子标记完成了对拟南芥AST基因的精细作图,成功地将AST基因定位到BAC克隆T13M11上,初步认为该BAC克隆中的基因T13M11.8可能是AST基因.该基因的DNA序列长1432bp,含有6个外显子和5个内含子,编码的蛋白与花青苷生物合成途径中的二氢黄酮醇-4-还原酶有较高的同源性.将进一步通过功能互补实验验证图位克隆的结果.     

Development of 50 gene-associated microsatellite markers using BAC clones and the construction of a linkage map of swine chromosome 4

The development of informative polymorphic markers is essential for QTL mapping. We developed 50 microsatellite markers from BAC clones containing genes that were predicted to map swine chromosome 4 (SSC4) according to comparative analysis between human and swine chromosomes, and constructed a linkage map that consisted of 37 markers including 24 markers closely linked to genes in BAC clones. Microsatellite markers were developed by direct-sequencing of BAC clones and our results demonstrated that this method was effective for developing microsatellite markers in specific regions on chromosomes. Effective development of microsatellite markers closely linked to genes can further accelerate the comparative studies of chromosomes between different species.     

Genetic and physical mapping of Avr1a in Phytophthora sojae

The interaction between soybean and the phytopathogenic oomycete Phytophthora sojae is controlled by host resistance (Rps) genes and pathogen avirulence (Avr) genes. We have mapped the Avr1a locus in F(2) populations derived from four different P. sojae races. Four RAPD and nine AFLP markers linked to Avr1a were initially identified. Nine markers were used to compare genetic linkage maps of the Avr1a locus in two distinct F(2) populations. Distorted segregation ratios favoring homozygous genotypes were noted in both crosses. Segregation analysis of all the markers in one F(2) population of 90 progeny generated a map of 113.2 cM encompassing Avr1a, with one marker cosegregating with the gene. The cosegregating DNA marker was used to isolate P. sojae BAC clones and construct a physical map covering 170 kb, from which additional DNA markers were developed. Three markers occurring within the BAC contig were mapped in an enlarged population of 486 F(2) progeny. Avr1a was localized to a 114-kb interval, and an average physical to genetic distance ratio of 391 kb/cM was calculated for this region. This work provides a basis for the positional cloning of Avr1a.     

A sequence-based genetic map of Medicago truncatula and comparison of marker colinearity with M. sativa

A core genetic map of the legume Medicago truncatula has been established by analyzing the segregation of 288 sequence-characterized genetic markers in an F(2) population composed of 93 individuals. These molecular markers correspond to 141 ESTs, 80 BAC end sequence tags, and 67 resistance gene analogs, covering 513 cM. In the case of EST-based markers we used an intron-targeted marker strategy with primers designed to anneal in conserved exon regions and to amplify across intron regions. Polymorphisms were significantly more frequent in intron vs. exon regions, thus providing an efficient mechanism to map transcribed genes. Genetic and cytogenetic analysis produced eight well-resolved linkage groups, which have been previously correlated with eight chromosomes by means of FISH with mapped BAC clones. We anticipated that mapping of conserved coding regions would have utility for comparative mapping among legumes; thus 60 of the EST-based primer pairs were designed to amplify orthologous sequences across a range of legume species. As an initial test of this strategy, we used primers designed against M. truncatula exon sequences to rapidly map genes in M. sativa. The resulting comparative map, which includes 68 bridging markers, indicates that the two Medicago genomes are highly similar and establishes the basis for a Medicago composite map.     

A sequence-ready contig map of the top arm of Arabidopsis thaliana chromosome 3.

A fine physical map of the top arm of Arabidopsis thaliana chromosome 3 has been constructed by ordering P1, TAC and BAC clones using the sequences of a variety of DNA markers and end-sequences of clones. The marker sequences used in this study were derived from 58 DNA markers, 93 YAC end-sequences, and 807 end-sequences of P1, TAC and BAC clones. The entire top arm of chromosome 3, except for the centromeric and telomeric regions, was covered by a single contig 13.3 Mb long. This fine physical map will facilitate gene isolation by map-based cloning experiments as well as genome sequencing of the top arm of chromosome 3. The map and end-sequence information are available on the web site KAOS (Kazusa Arabidopsis data Opening Site) at [http://www.kazusa.or.jp/arabi/].