Insertional Transposon Mutagenesis in the <Emphasis Type="Italic">Xylella fastidiosa</Emphasis> Citrus Variegated Chlorosis Strain with Transposome

To overcome the difficulty in obtaining mutants of the citrus strains of Xylella fastidiosa, we evaluated mutagenesis using the transposome system as a tool for the isolation of a large number of mutants. Electroporation of a commercial transposome system in X. fastidiosa CVC (Citrus Variegated Chlorosis) strain J1a12 yielded an efficiency of 1.2 × 10³ kanamycin (Km)-resistant clones per g of DNA. Southern blot analysis demonstrated that the transposon was randomly inserted, and nucleotide sequence analysis indicated the presence of 9 bp direct repeats flanking the transposon insertion site. Analysis by PCR of one of the insertion mutants (clone J15) showed that the transposon was stable after eight passages in solid media. These results show that the transposome system can be used to generate a random mutant library of Xylella fastidiosa CVC strain.     

Generation of Enterobacter sp. YSU Auxotrophs Using Transposon Mutagenesis

Prototrophic bacteria grow on M-9 minimal salts medium supplemented with glucose (M-9 medium), which is used as a carbon and energy source. Auxotrophs can be generated using a transposome. The commercially available, Tn5-derived transposome used in this protocol consists of a linear segment of DNA containing an R6Kγ replication origin, a gene for kanamycin resistance and two mosaic sequence ends, which serve as transposase binding sites. The transposome, provided as a DNA/transposase protein complex, is introduced by electroporation into the prototrophic strain, Enterobacter sp. YSU, and randomly incorporates itself into this host’s genome. Transformants are replica plated onto Luria-Bertani agar plates containing kanamycin, (LB-kan) and onto M-9 medium agar plates containing kanamycin (M-9-kan). The transformants that grow on LB-kan plates but not on M-9-kan plates are considered to be auxotrophs. Purified genomic DNA from an auxotroph is partially digested, ligated and transformed into a pir⁺ Escherichia coli (E. coli) strain. The R6Kγ replication origin allows the plasmid to replicate in pir⁺ E. coli strains, and the kanamycin resistance marker allows for plasmid selection. Each transformant possesses a new plasmid containing the transposon flanked by the interrupted chromosomal region. Sanger sequencing and the Basic Local Alignment Search Tool (BLAST) suggest a putative identity of the interrupted gene. There are three advantages to using this transposome mutagenesis strategy. First, it does not rely on the expression of a transposase gene by the host. Second, the transposome is introduced into the target host by electroporation, rather than by conjugation or by transduction and therefore is more efficient. Third, the R6Kγ replication origin makes it easy to identify the mutated gene which is partially recovered in a recombinant plasmid. This technique can be used to investigate the genes involved in other characteristics of Enterobacter sp. YSU or of a wider variety of bacterial strains.     

Use of transposon-transposase complexes to create stable insertion mutant strains of Francisella tularensis LVS

Francisella tularensis is a highly virulent zoonotic bacterial pathogen capable of infecting numerous different mammalian species, including humans. Elucidation of the pathogenic mechanisms of F. tularensis has been hampered by a lack of tools to genetically manipulate this organism. Herein we describe the use of transposome complexes to create insertion mutations in the chromosome of the F. tularensis live vaccine strain (LVS). A Tn5-derived transposon encoding kanamycin resistance and lacking a transposase gene was complexed with transposase enzyme and transformed directly into F. tularensis LVS by electroporation. An insertion frequency of 2.6 x 10(-8) +/- 0.87 x 10(-8) per cell was consistently achieved using this method. There are 178 described Tn5 consensus target sites distributed throughout the F. tularensis genome. Twenty-two of 26 transposon insertions analyzed were within known or predicted open reading frames, but none of these insertions was associated with the Tn5 target site. Analysis of the insertions of sequentially passed strains indicated that the transposons were maintained stably at the initial insertion site after more than 270 generations. Therefore, transformation by electroporation of Tn5-based transposon-transposase complexes provided an efficient mechanism for generating random, stable chromosomal insertion mutations in F. tularensis.     

Transposon mutagenesis of the obligate intracellular pathogen Rickettsia prowazekii

Genetic analysis of Rickettsia prowazekii has been hindered by the lack of selectable markers and efficient mechanisms for generating rickettsial gene knockouts. We have addressed these problems by adapting a gene that codes for rifampin resistance for expression in R. prowazekii and by incorporating this selection into a transposon mutagenesis system suitable for generating rickettsial gene knockouts. The arr-2 gene codes for an enzyme that ADP-ribosylates rifampin, thereby destroying its antibacterial activity. Based on the published sequence, this gene was synthesized by PCR with overlapping primers that contained rickettsial codon usage base changes. This R. prowazekii-adapted arr-2 gene (Rparr-2) was placed downstream of the strong rickettsial rpsL promoter (rpsL(P)), and the entire construct was inserted into the Epicentre EZ::TN transposome system. A purified transposon containing rpsL(P)-Rparr-2 was combined with transposase, and the resulting DNA-protein complex (transposome) was electroporated into competent rickettsiae. Following selection with rifampin, rickettsiae with transposon insertions in the genome were identified by PCR and Southern blotting and the insertion sites were determined by rescue cloning and inverse PCR. Multiple insertions into widely spaced areas of the R. prowazekii genome were identified. Three insertions were identified within gene coding sequences. Transposomes provide a mechanism for generating random insertional mutations in R. prowazekii, thereby identifying nonessential rickettsial genes.     

Transposon mutagenesis of the anaerobic commensal, Bacteroides fragilis, using the EZ::TN5 transposome

Genetic analysis of Bacteroides fragilis (BF) is hindered because of the lack of efficient transposon mutagenesis methods. Here, we describe a simple method for transposon mutagenesis using EZ::TN5, a commercially available system that we optimized for use in BF638R. The modified EZ::TN5 transposon contains an Escherichia coli conditional origin of replication, a kanamycin resistance gene for E. coli, an erythromycin resistance gene for BF , and 19 basepair transposase recognition sequences on either ends. Electroporation of the transposome (transposon-transposase complex) into BF638R yielded 3.2 ± 0.35 × 10(3) CFU μg(-1) of transposon DNA. Modification of the transposon by the BF638R restriction/modification system increased transposition efficiency sixfold. Electroporation of the EZ::TN5 transposome results in a single-copy insertion of the transposon evenly distributed across the genome of BF638R and can be used to construct a BF638R transposon library. The transposon was also effective in mutating a BF clinical isolate and a strain of the related species, Bacteroides thetaiotaomicron. The EZ::TN5-based mutagenesis described here is more efficient than other transposon mutagenesis approaches previously reported for BF.     

Phenotypic mutants of the intracellular actinomycete Rhodococcus equi created by in vivo Himar1 transposon mutagenesis

Rhodococcus equi is a facultative intracellular opportunistic pathogen of immunocompromised people and a major cause of pneumonia in young horses. An effective live attenuated vaccine would be extremely useful in the prevention of R. equi disease in horses. Toward that end, we have developed an efficient transposon mutagenesis system that makes use of a Himar1 minitransposon delivered by a conditionally replicating plasmid for construction of R. equi mutants. We show that Himar1 transposition in R. equi is random and needs no apparent consensus sequence beyond the required TA dinucleotide. The diversity of the transposon library was demonstrated by the ease with which we were able to screen for auxotrophs and mutants with pigmentation and capsular phenotypes. One of the pigmentation mutants contained an insertion in a gene encoding phytoene desaturase, an enzyme of carotenoid biosynthesis, the pathway necessary for production of the characteristic salmon color of R. equi. We identified an auxotrophic mutant with a transposon insertion in the gene encoding a putative dual-functioning GTP cyclohydrolase II-3,4-dihydroxy-2-butanone-4-phosphate synthase, an enzyme essential for riboflavin biosynthesis. This mutant cannot grow in minimal medium in the absence of riboflavin supplementation. Experimental murine infection studies showed that, in contrast to wild-type R. equi, the riboflavin-requiring mutant is attenuated because it is unable to replicate in vivo. The mutagenesis methodology we have developed will allow the characterization of R. equi virulence mechanisms and the creation of other attenuated strains with vaccine potential.     

Transposon Mutagenesis of the Obligate Intracellular Pathogen Rickettsia prowazekii

Genetic analysis of Rickettsia prowazekii has been hindered by the lack of selectable markers and efficient mechanisms for generating rickettsial gene knockouts. We have addressed these problems by adapting a gene that codes for rifampin resistance for expression in R. prowazekii and by incorporating this selection into a transposon mutagenesis system suitable for generating rickettsial gene knockouts. The arr-2 gene codes for an enzyme that ADP-ribosylates rifampin, thereby destroying its antibacterial activity. Based on the published sequence, this gene was synthesized by PCR with overlapping primers that contained rickettsial codon usage base changes. This R. prowazekii-adapted arr-2 gene (Rparr-2) was placed downstream of the strong rickettsial rpsL promoter (rpsL^P), and the entire construct was inserted into the Epicentre EZ::TN transposome system. A purified transposon containing rpsL^P-Rparr-2 was combined with transposase, and the resulting DNA-protein complex (transposome) was electroporated into competent rickettsiae. Following selection with rifampin, rickettsiae with transposon insertions in the genome were identified by PCR and Southern blotting and the insertion sites were determined by rescue cloning and inverse PCR. Multiple insertions into widely spaced areas of the R. prowazekii genome were identified. Three insertions were identified within gene coding sequences. Transposomes provide a mechanism for generating random insertional mutations in R. prowazekii, thereby identifying nonessential rickettsial genes.     

Isolation and characterization of a native composite transposon, Tn14751, carrying 17.4 kilobases of Corynebacterium glutamicum chromosomal DNA

A native composite transposon was isolated from Corynebacterium glutamicum ATCC 14751. This transposon comprises two functional copies of a corynebacterial IS31831-like insertion sequence organized as converging terminal inverted repeats. This novel 20.3-kb element, Tn14751, carries 17.4 kb of C. glutamicum chromosomal DNA containing various genes, including genes involved in purine biosynthesis but not genes related to bacterial warfare, such as genes encoding mediators of antibiotic resistance or extracellular toxins. A derivative of this element carrying a kanamycin resistance cassette, minicomposite Tn14751, transposed into the genome of C. glutamicum at an efficiency of 1.8 x 10(2) transformants per mug of DNA. Random insertion of the Tn14751 derivative carrying the kanamycin resistance cassette into the chromosome was verified by Southern hybridization. This work paves the way for realization of the concept of minimum genome factories in the search for metabolic engineering via genome-scale directed evolution through a combination of random and directed approaches.     

IS231A from Bacillus thuringiensis is functional in Escherichia coli: transposition and insertion specificity.

A kanamycin resistance gene was introduced within the insertion sequence IS231A from Bacillus thuringiensis, and transposition of the element was demonstrated in Escherichia coli. DNA sequencing at the target sites showed that IS231A transposition results in direct repeats of variable lengths (10, 11, and 12 bp). These target sequences resemble the terminal inverted repeats of the transposon Tn4430, which are the preferred natural insertion sites of IS231 in B. thuringiensis.     

IS900-promoted stable integration of a foreign gene into mycobacteria

An artificial mycobacterial transposon was constructed by placing two copies of the insertion sequence IS900 flanking a kanamycin resistance gene into a non-(mycobacterial) replicating vector. Constructs were introduced into mycobacteria by electroporation and transposition events conferring kanamycin resistance were selected. Integration of IS900 into several genomic sites was analysed by Southern blotting and shown to involve both simple insertions and cointegrate formation, suggesting that IS900 can transpose by a replicative mechanism. Kanamycin resistance of IS900-integrated transformants was shown to be stable in the absence of selection.     

Phenotypic expression of PCR-generated random mutations in a Pseudomonas putida gene after its introduction into an Acinetobacter chromosome by natural transformation

Localized sets of random point mutations generated by PCR amplification can be transferred efficiently to the chromosome of Acinetobacter ADP1 (also known as strain BD413) by natural transformation. The technique does not require cloning of PCR fragments in plasmids: PCR-amplified DNA fragments are internalized by cells and directly incorporated into their genomes by homologous recombination. Previously such procedures for random mutagenesis could be applied only to Acinetobacter genes affording the selection of mutant phenotypes. Here we describe the construction of a vector and recipient that allow for mutagenesis, recovery, and expression of heterologous genes that may lack a positive selection. The plasmid carries an Acinetobacter chromosomal segment interrupted by a multiple cloning site next to a kanamycin resistance marker. The insertion of heterologous DNA into the multiple cloning site prepares the insert as a target for PCR mutagenesis. PCR amplifies the kanamycin resistance marker and a flanking region of Acinetobacter DNA along with the insert of heterologous DNA. Nucleotide sequence identity between the flanking regions and corresponding chromosomal segments in an engineered Acinetobacter recipient allows homologous recombination of the PCR-amplified DNA fragments into a specific chromosomal docking site from which they can be expressed. The recipient strain contains only a portion of the kanamycin resistance gene, so donor DNA containing both this gene and the mutagenized insert can be selected by demanding growth of recombinants in the presence of kanamycin. The effectiveness of the technique was demonstrated with the relatively GC-rich Pseudomonas putida xylE gene. After only one round of PCR amplification (35 cycles), donor DNA produced transformants of which up to 30% carried a defective xylE gene after growth at 37 degrees C. Of recombinant clones that failed to express xylE at 37 degrees C, about 10% expressed the gene when grown at 22 degrees C. The techniques described here could be adapted to prepare colonies with an altered function in any gene for which either a selection or a suitable phenotypic screen exists.     

Selection and characterization of Spiroplasma citri mutants by random transposome mutagenesis

Phytopathogenic spiroplasmas can multiply in vascular plants and insects. A deeper understanding of this dual-host life could be furthered through the identification by random mutagenesis of spiroplasma genes required. The ability of the EZ::TN? Tnp transposome? system to create random insertional mutations in the genome of Spiroplasma citri was evaluated. The efficiency of electroporation-mediated transformation of S. citri BR3-3X averaged 28.8 CFUs/ng transposome for 10(9) spiroplasma cells. Many transformants appearing on the selection plates were growth impaired when transferred to broth. Altering broth composition in various ways did not improve their growth. However, placing colonies into a small broth volume resulted in robust growth and successful subsequent passages of a subset of transformants. PCR using primers for the dihydrofolate reductase gene confirmed the transposon's presence in the genomes of selected transformants. Southern blot hybridization and nucleotide sequencing suggested that insertion was random within the chromosome and usually at single sites. The insertions were stable. Growth rates of all transformants were lower than that of the wild-type S. citri, but none lost the ability to adhere to a Circulifer tenellus (CT-1) cell line. The EZ::TN? Tnp transposome? system represents an additional tool for genetic manipulation of the fastidious spiroplasmas.     

A practical random mutagenesis system for probiotic Lactobacillus casei using Tn5 transposition complexes

Aims: Despite the fact that the entire genome sequence of probiotic Lactobacillus casei has recently been available, their mechanisms of beneficial effects are poorly clarified, probably because of the lack of an efficient mutagenesis system. The aim of this study was to establish a practical random mutagenesis system of L. casei using the Tn5 transposome complexes. Methods and Results: We optimized the conditions for transformation using a plasmid pUCYIT356‐1‐Not2 and then transposition reaction using Tn5 transposome system for L. casei ATCC 27139. Tn5 insertion library of this strain being consisted of 9408 mutants was constructed by repeating the mutagenesis procedure. To examine the utility of this mutagenesis system, we screened a panel of insertion mutants for nutrient requirements. Six auxotrophic mutants were isolated and their Tn5 insertion sites were determined by inverse PCR, which demonstrated that insertions occur randomly throughout the whole bacterial genome. Conclusions: Tn5 transposome system functioned efficiently to generate transposon insertion mutants of L. casei and enabled to construct useful L. casei Tn5 insertion library at optimized conditions for transformation and transposition. Significance and Impact of the Study: The availability of this system facilitates the study of the mechanisms of beneficial effects of L. casei for human health.     

Use of Transposon-Transposase Complexes To Create Stable Insertion Mutant Strains of Francisella tularensis LVS

Francisella tularensis is a highly virulent zoonotic bacterial pathogen capable of infecting numerous different mammalian species, including humans. Elucidation of the pathogenic mechanisms of F. tularensis has been hampered by a lack of tools to genetically manipulate this organism. Herein we describe the use of transposome complexes to create insertion mutations in the chromosome of the F. tularensis live vaccine strain (LVS). A Tn5-derived transposon encoding kanamycin resistance and lacking a transposase gene was complexed with transposase enzyme and transformed directly into F. tularensis LVS by electroporation. An insertion frequency of 2.6 × 10⁻⁸ ± 0.87 × 10⁻⁸ per cell was consistently achieved using this method. There are 178 described Tn5 consensus target sites distributed throughout the F. tularensis genome. Twenty-two of 26 transposon insertions analyzed were within known or predicted open reading frames, but none of these insertions was associated with the Tn5 target site. Analysis of the insertions of sequentially passed strains indicated that the transposons were maintained stably at the initial insertion site after more than 270 generations. Therefore, transformation by electroporation of Tn5-based transposon-transposase complexes provided an efficient mechanism for generating random, stable chromosomal insertion mutations in F. tularensis.     

Robust multi-type plasmid modifications based on isothermal in vitro recombination

A robust strategy for multi-type plasmid modifications is developed based on the isothermal in vitro recombination technology, by which any combination of the sequence modifications can be efficiently achieved in plasmids at any desired position in a seamless manner. As an example, we showed that a plasmid modification with insertion of a GFP gene, deletion of a 623-bp fragment, and substitution of an ampicillin resistance gene by a kanamycin resistance gene was accomplished simultaneously by this method. Therefore, the isothermal in vitro recombination-based multi-type plasmid modification strategy is a useful approach for broad application prospects in molecular biology studies.     

Excision of a DNA sequence determining kanamycin resistance from a ColE1-Km recombinant plasmid

Summary A 4.8×10⁶ dalton ECoRI-generated fragment of the R-factor R6-5 carrying the gene for kanamycin resistance (Km) was joined in vitro to ECoRI-treated ColE1 plasmid DNA. Transformation ofE. coli with the ColE1-Km recombinant plasmid yielded clones, which were immune to colicin E1, resistant to kanamycin and failed to produce colicin E1. During multiplication of this recombinant plasmid in the presence of chloramphenicol, cells expressed an increased resistance to kanamycin. Transformation studies with the recombinant DNA molecule showed very frequent loss of Km resistance in those cells harbouring a preexisting F'gal plasmid. Since colicin immunity is not affected and the col^- phenotype is still present, one has to test for a remaining DNA sequence further existing in ColE1 DNA by cleaving the plasmid DNA with the ECoRI restriction endonuclease. The full length of ColE1 DNA (6.2 kb) was restored, which confirmed that no deletion of ColE1 DNA sequences had occured. The remaining DNA sequence was identified as a 2.0 or 2.2 kb segment. On the basis of the length of the excised fragment it is proposed that the insertion sequence IS1 and a part of the inverted repeat sequence with coordinates 21.0 to 22.0 of the R6-5 DNA are recognised by a nucleolytic function.     

Cloning, mutagenesis, and physiological effect of a hydroxypyruvate reductase gene from Methylobacterium extorquens AM1.

The gene encoding the serine cycle hydroxypyruvate reductase of Methylobacterium extorquens AM1 was isolated by using a synthetic oligonucleotide with a sequence based on a known N-terminal amino acid sequence. The cloned gene was inactivated by insertion of a kanamycin resistance gene, and recombination of this insertion derivative with the wild-type gene produced a serine cycle hydroxypyruvate reductase null mutant. This mutant had lost its ability to grow on C-1 compounds but retained the ability to grow on C-2 compounds, showing that the hydroxypyruvate reductase operating in the serine cycle is not involved in the conversion of acetyl coenzyme A to glycine as previously proposed. A second hydroxypyruvate-reducing enzyme with a low level of activity was found in M. extorquens AM1; this enzyme was able to interconvert glyoxylate and glycollate. The gene encoding hydroxypyruvate reductase was shown to be located about 3 kb upstream of two other serine cycles genes encoding phosphoenolpyruvate carboxylase and malyl coenzyme A lyase.     

Improving the Efficiency of Transposon Mutagenesis in Salmonella Enteritidis by Overcoming Host-Restriction Barriers

Transposon mutagenesis using transposome complex is a powerful method for functional genomics analysis in diverse bacteria by creating a large number of random mutants to prepare a genome-saturating mutant library. However, strong host restriction barriers can lead to limitations with species- or strain-specific restriction-modification systems. The purpose of this study was to enhance the transposon mutagenesis efficiency of Salmonella Enteritidis to generate a larger number of random insertion mutants. Host-adapted Tn5 DNA was used to form a transposome complex, and this simple approach significantly and consistently improved the efficiency of transposon mutagenesis, resulting in a 46-fold increase in the efficiency as compared to non-adapted transposon DNA fragments. Random nature of Tn5 insertions was confirmed by high-throughput sequencing of the Tn5-junction sequences. The result based on S. Enteritidis in this study should find broad applications in preparing a comprehensive mutant library of other species using transposome complex.     

Cloning of the nptII gene of Escherichia coli and construction of a recombinant strain harboring functional recA and nptII antibiotic resistance

In an attempt to clone the ORF of the nptII gene of Escherichia coli K12 (ATCC 10798), two degenerate primers were designed based on the nptII sequence of its Tn5 transposon. The nptII ORF was placed under the control of the E. coli hybrid trc promoter, in the pKK388-1 vector, transformed into E. coli DH5α ΔrecA (recombinant, deficient strain). Transferred cells were tested for ampicillin, tetracycline, kanamycin, neomycin, geneticin, paromomycin, penicillin, and UV resistance. The neomycin phosphotransferase gene of E. coli was cloned successfully and conferred kanamycin, neomycin, geneticin, and paromomycin resistance to recombinant DH5α; this did not inhibit insertion of additional antibiotic resistance against ampicillin and tetracycline, meaning the trc promoter can express two different genes carried by two different plasmids harbored in the same cell. This resistance conferral process could be considered as an emulation of horizontal gene transfer occurring in nature and would be a useful tool for understanding mechanisms of evolution of multidrug-resistant strains.