Interaction of the Bacillus subtilis phage phi 105 repressor DNA: a genetic analysis.

The Bacillus subtilis phage phi 105 repressor specifically recognizes a 14-bp operator sequence which does not exhibit 2-fold rotational symmetry. To facilitate a genetic analysis of this sequence-dependent DNA binding a B. subtilis strain was constructed in which mutations affecting the phi 105 repressor-operator interaction cause a selectable phenotype, chloramphenicol resistance. After in vivo mutagenesis, we isolated and mapped 22 different mutations in the repressor coding sequence, 15 of which are missense substitutions. These are exclusively located in the N-terminal part (positions 1-43) of the 144 residue long polypeptide. Two nonsense mutants, at positions 70 and 89, respectively, still show partial repressor activity. These data suggest that the phi 105 repressor consists of at least two independently folding structural domains, of which the N-terminal is involved in operator binding. Twelve missense mutations are clustered in a region extending from Gln-18 to Arg-37, which we propose to be the DNA-binding alpha-helix--beta-turn--alpha-helix motif, common to all lambda Cro-like repressors. The second ('recognition') helix shows significant homology with the corresponding sequence in Tn3 resolvase, and there is also a striking similarity between the phi 105 operator and the consensus sequence for a Tn3 res half-site. Based on these observations, and on the previously isolated phi 105 0c mutants, we tentatively assign some specific contacts between base pairs from the first half of a phi 105 operator site and amino acids from the repressor's 'recognition helix'.     

A model for the LexA repressor DNA complex

A structural model for the interaction of the LexA repressor DNA binding domain (DBD) with operator DNA is derived by means of Monte Carlo docking. Protein–DNA complexes were generated by docking the LexA repressor DBD NMR solution structure onto both rigid and bent B-DNA structures while giving energy bonuses for contacts in agreement with experimental data. In the resulting complexes, helix III of the LexA repressor DBD is located in the major groove of the DNA and residues Asn-41, Glu-44, and Glu-45 form specific hydrogen bonds with bases of the CTGT DNA sequence. Ser-39, Ala-42, and Asn-41 are involved in a hydrophobic interaction with the methyl group of the first thymine base. Residues in the loop region connecting the two β-sheet strands are involved in nonspecific contacts near the dyad axis of the operator. The contacts observed in the docked complexes cover the entire consensus CTGT half-site DNA operator, thus explaining the specificity of the LexA repressor for such sequences. In addition, a large number of nonspecific interactions between protein and DNA is observed. The agreement between the derived model for the LexA repressor DBD/DNA complex and experimental biochemical results is discussed. © 1995 Wiley-Liss, Inc.     

Probing the structure of gal operator-repressor complexes. Conformation change in DNA

The gal operon is regulated by binding of Gal repressor to two operator loci, OE and OI, which are separated by 114 base pairs (bp). We have probed the actual operator DNA segments with and without Gal repressor occupation by characterizing the regions protected by repressor from DNase I digestion and dimethyl sulfate methylation. The segments which are protected from DNase I digestion in both OE and OI are about 22 bp long and seem to include 2-3 extra bp on either side of a 16-bp similar sequence containing an approximate dyad symmetry, with a consensus half-symmetry sequence GTG(G/T)AA-C. Repressor occupation hinders the reactivity of the consensus guanines in the four half-symmetry sequences, as shown by retardation of methylation at the N-7 positions by dimethyl sulfate owing to repressor binding. The protected guanines are symmetrically located. Since a dimeric Gal repressor affects symmetrically located bases, it is consistent with the notion that each half-operator is occupied by a repressor subunit. Because the N-7 positions of methylation of guanines lie in the major grooves and the protected guanines are located at positions 1, 3, 8 and the rotational 1', 3', and 8' in the 16-bp dyad symmetry, we suggest that Gal repressor establishes direct contacts with bases at 1, 3, 1', and 3' through two major grooves lying on one face of an operator helix and prevents reactivity of the guanines at 8 and 8' of a third major groove on the opposite face by changing the DNA helical structure at this position. Contacts at other positions are also discussed.     

Biochemical and genetic analysis of operator contacts made by residues within the beta-sheet DNA binding motif of Mnt repressor.

Residues 2, 6, 8 and 10 of Mnt repressor are the major determinants of operator DNA binding and recognition. Here, we investigate the interaction of wild-type Mnt and mutants bearing the Arg2----Lys, His6----Ala, Asn8----Ala and Arg10----Lys mutations with operator DNA modified by methylation or by symmetric base substitutions. The wild-type pattern of methylation interference is altered in specific ways for each of the mutant proteins. In addition, some of the mutant proteins show a 'loss of contact' phenotype with specific mutant operators. Taken together, these and previous results predict the following contacts between side chains in the Mnt tetramer and operator DNA: Arg2 recognizes the guanines at operator positions 10 and 12; His6 contacts the guanines at operator positions 5 and 17; Asn8 contacts operator positions 4, 7, 15 and 18; Arg10 contacts the guanines at operator positions 8 and 14. The proposed contacts can be accommodated in a structural model in which the anti-parallel beta-sheet motifs of Mnt dimers lie in the major grooves of each operator half-site, centered over pseudo-symmetry axes that are 5.5 bp from the central dyad axis of the operator.     

Phage λ Cro Protein and Ci Repressor Use Two Different Patterns of Specific Protein-DNA Interactions to Achieve Sequence Specificity in Vivo

By assaying the binding of wild-type Cro to a set of 40 mutant lambda operators in vivo, we have determined that the 14 outermost base pairs of the 17 base pair, consensus lambda operator are critical for Cro binding. Cro protein recognizes 4 base pairs in a lambda operator half-site in different ways than cI repressor. The sequence determinants of Cro binding at these critical positions in vivo are nearly perfectly consistent with the model proposed by W. F. ANDERSON, D. H. OHLENDORF, Y. TAKEDA and B. W. MATTHEWS and modified by Y. TAKEDA, A. SARAI and V. M. RIVERA for the specific interactions between Cro and its operator, and explain the relative order of affinities of the six natural lambda operators for Cro. Our data call into question the idea that lambda repressor and Cro protein recognize the consensus lambda operator by nearly identical patterns of specific interactions.     

DNA Sequence Determinants of λ Repressor Binding in Vivo

The critical operator determinants for λ repressor recognition have been defined by analyzing the binding of wild-type repressor to a set of mutant operators in vivo. Base pair substitutions at six positions within the λ operator half-site impair binding severely, and define these base pairs as critical for operator function. One mutant operator binds repressor better than the consensus operator, and is a superoperator. The model proposed by M. Lewis in 1983 for the binding of λ repressor to its operator accurately predicts the observed operator requirements for binding in vivo, with several minor exceptions. The order of affinities of the six natural λ operators has also been determined.     

Characterization of the interaction of the glp repressor of Escherichia coli K-12 with single and tandem glp operator variants.

The glp operons of Escherichia coli are negatively controlled by the glp repressor. Comparison of the repressor-binding affinities for consensus and altered consensus operators in vivo showed that all base substitutions at positions 3, 4, 5, and 8 from the center of the palindromic operator caused a striking decrease in repressor binding. Substitutions at other positions had a severe to no effect on repressor binding, depending on the base substitution. The results obtained indicate that the repressor binds with highest affinity to operators with the half-site WATKYTCGWW, where W is A or T, K is G or T, and Y is C or T. Strong cooperative binding of the repressor to tandem operators was demonstrated in vivo. Cooperativity was maximal when two 20-bp operators were directly repeated or when 2 bp separated the two operators. Cooperativity decreased with the deletion of 2 bp or the addition of 4 bp between the individual operators. Cooperativity was eliminated with a 6-bp insertion between the operators.     

LexA repressor induces operator-dependent DNA bending

LexA, the repressor of the SOS system in Escherichia coli induces a substantial DNA bending upon interaction with the operator of the caa gene, which codes for the bacterial toxin colicin A. Analysis by gel electrophoresis of a family of DNA fragments of identical length, but bearing the caa operator at different positions, shows that DNA bending occurs close to or within the operator sequence upon LexA binding. In contrast, the interaction of LexA with the recA operator induces no detectable bending on 5% polyacrylamide gels. This difference between the two operators is likely to be due to an intrinsic bendability of the caa operator related to thymine tracts located on both sides of the operator. Such tracts do not exist in the recA operator. The free DNA fragments harbouring the caa operator show a slight tendency to bend even in the absence of the LexA repressor. The centre of this intrinsic bend is located close to or within the caa operator.     

Quantitative analysis of Tn10 Tet repressor binding to a complete set of tet operator mutants.

A saturating oligonucleotide-directed mutagenesis of both tet operators in the tet regulatory sequence was performed yielding mutants with four identical base pair exchanges at equivalent positions in the four tet operator half sides. The mutants were cloned between bipolar lacZ and galK indicator genes on a multicopy plasmid allowing the quantitative analysis of their effects in vivo. In the absence of Tet repressor the mutations lead to considerably different expression levels of both genes. They are discussed with respect to the promoter consensus sequences. In particular, the -10 region of the in vivo active tetPR2 promoter is unambiguously defined by these results. In the presence of Tet repressor most of the mutants exhibit a lower affinity for that protein as determined quantitatively by their reduced expression levels. In general, tet operator recognition is most strongly affected by alterations of base pairs near the center of the palindromic sequence. The most important position is the third base pair, followed by base pairs two, four, five and six, the latter showing similar effects as base pair one. At each position, the four possible base pairs show different affinities for Tet repressor. They are discussed according to their exposure of H-bond donors and -acceptors in the major and minor grooves of the B-DNA. The results are in agreement with major groove contacts at positions two, three and five. At position four a low potential correlation of efficiencies with the H-bonding in the minor groove is found, while mutations at position six seem to influence repressor binding by other mechanisms.     

Contacts between Tet repressor and tet operator revealed by new recognition specificities of single amino acid replacement mutants.

We have analyzed the DNA binding properties of Tet-repressor mutants with single amino acid residue replacements at eight positions within the alpha-helix-turn-alpha-helix DNA-binding motif. A saturation mutagenesis of Gln38, Pro39, Thr40, Tyr42, Trp43 and His44 in the second alpha-helix was performed; in addition, several substitutions of Thr27 and Arg28 in the first alpha-helix were constructed. The abilities of these mutant repressors to bind a set of 16 operator variants were determined and revealed 23 new binding specificities. All repressor mutants with DNA-binding activity were inducible by tetracycline, while mutants lacking binding activity were trans-dominant over the wild-type. All mutant proteins were present at the same intracellular steady-state concentrations as the wild-type. These results suggest the structural integrity of the mutant repressors. On the basis of the new recognition specificities, five contacts between a repressor monomer and each operator half-site and the chemical nature of these repressor-operator interactions are proposed. We suggest that Arg28 contacts guanine of the G.C base-pair at operator position 2 with two H-bonds, Gln38 binds adenine of the A.T base-pair at position 3 with two H-bonds, and the methyl group of Thr40 participates in a van der Waals' contact with cytosine of the G.C base-pair at position 6 of tet operator. A previously unrecognized type of interaction is proposed for Pro39, which inserts its side-chain between the methyl groups of the thymines of T.A and A.T base-pairs at positions 4 and 5. Computer modeling of these proposed contacts reveals that they are possible using the canonical structures of the helix-turn-helix motif and B-DNA. These contacts suggest an inverse orientation of the Tet repressor helix-turn-helix with respect to the operator center as compared with non-inducible repressor-operator complexes, and are supported by similar contacts of other repressor-operator complexes.     

Repertoire selection of variant single-chain Cro: toward directed DNA-binding specificity of helix-turn-helix proteins

A single-chain derivative of the lambda Cro repressor (scCro) has been randomly mutated in amino acid residues critical for specific DNA recognition to create libraries of protein variants. Utilizing phage display-afforded affinity selection, scCro variants have been isolated for binding to synthetic DNA ligands. Isolated scCro variants were analyzed functionally, both in fusion with phage particles and after expression of the corresponding free proteins. The binding properties with regard to specificity and affinity in binding to different DNA ligands were investigated by inhibition studies and determination of equilibrium dissociation constants for formed complexes. Variant proteins with altered DNA-sequence specificity were identified, which favored binding of targeted synthetic DNA sequences over a consensus operator sequence, bound with high affinity by wild-type Cro. The specificities were relatively modest (2-3-fold, as calculated from K(D) values), which can be attributed to the inherent properties in the design of the selection system; one half-site of the synthetic DNA sequences maintains the consensus operator sequence, and one "subunit" of the variant single-chain Cro dimers was conserved as wild-type sequence. The anticipated interaction between the wild-type subunit and the consensus DNA half-site of target DNA ligands is, hence, expected to contribute to the overlap in sequence discrimination. The binding affinity for the synthetic DNA sequences, however, was improved 10-30-fold in selected variant proteins as compared to "wild-type" scCro.     

Repression of the E coli recA gene requires at least two LexA protein monomers

To analyze the DNA binding domain of E coli LexA repressor and to test whether the repressor binds as a dimer to DNA, negative dominant lexA mutations affecting the binding domain have been isolated. A large number of amino acid substitutions between amino acid positions 39 and 46 were introduced using cassette mutagenesis. Mutants defective in DNA binding were identified and then examined for dominance to lexA+. A number of substitutions weakened repressor function partially, whereas other substitutions led to a repressor with no demonstrable activity and a defective dominant phenotype. Since the LexA binding site has dyad symmetry, we infer that this dominance results from interaction of monomers of wild-type LexA protein with mutant monomers and that an oligomeric form of repressor binds to operator. The binding of LexA protein to operator DNA was investigated further using a mutant protein, LexA408, which recognizes a symmetrically altered operator mutant but not wild-type operator. A mixture of mutant LexA408 and LexA+ proteins, but neither individual protein, bound to a hybrid recA operator consisting of mutant and wild-type operator half sites. These results suggest that at least 1 LexA protein monomer interacts with each operator half site. We discuss the role of LexA oligomer formation in binding of LexA to operator DNA.     

Crystallographic analysis of Lac repressor bound to natural operator O1

Previous structures of Lac repressor bound to DNA used a fully symmetric "ideal" operator sequence that is missing the central G-C base-pair present in the three natural operator sequences. Here we have determined the X-ray crystal structure of a dimeric Lac repressor bound to a 22 base-pair DNA with the natural operator O1 sequence and the anti-inducer ONPF, at 4.0 A resolution. The natural operator is bent in the same way as the symmetric sequence, due to the binding of the hinge helices of the repressor to the minor groove at the central GCGG sequence of O1. Comparison of the structures of the repressor bound to the natural and symmetric operators shows very similar overall structures, with only slight rearrangements of the headpiece domains of the repressor. Analysis of crystals with iodinated DNA shows that the operator is uniquely positioned and allows for the sequence registration of the DNA relative to the repressor to be determined. The kink in the operator is centered between the left half-site and the central G-C base-pair of O1. Our results are most consistent with a previously proposed model in which, relative to the complex with the symmetric operator, the repressor accommodates binding to the natural operator sequence by shifting the position of the right headpiece by one base-pair step towards the center of O1.     

Contacts between the LexA repressor--or its DNA-binding domain--and the backbone of the recA operator DNA.

Using hydroxyl radical footprinting and ethylation interference experiments, we have determined the backbone contacts made by the entire LexA repressor and its amino-terminal fragment with the recA operator DNA. These techniques reveal essentially the same contacts between both proteins and one side of the DNA helix if one assumes that the DNA stays in the normal B-conformation. This result is somewhat unexpected because protection of guanine bases against methylation suggested a somewhat twisted recognition surface. The backbone contacts revealed by both methods are symmetrically disposed with respect to the center of the operator, providing further evidence that the operator binds two LexA monomers. Each half-operator contains seven interfering phosphates. These phosphates are found on both sides of the 5'-CTGT sequence that is believed to be the principal recognition target. On the side close to the center of the operator are found two phosphates, whereas the other five are clustered on the side apart from the dyad axis. We are not aware of such an extended cluster of interfering phosphates for any other DNA-binding protein. A quantification of the hydroxyl radical footprints allowed us to compare further the affinity of the LexA repressor for the recA operator with that of its isolated DNA binding domain. We find an only 13-fold higher binding constant for LexA than for its amino-terminal domain, which is in good agreement with our earlier results for the uvrA operator using a completely different binding assay.     

recA operator mutations and their usefulness

Mutations at three positions in the operator for recA have been detected, cloned and sequenced. Derepressed amounts of recA protein vary over a forty-fold range and correlate well with reduced affinities for lexA repressor of the mutant operators. One mutant confirms the region of major groove interaction between repressor and operator. Another has been used to demonstrate that RecF pathway genes other than recA are under lexA control.     

In vivoandin vitroStudies of TrpR-DNA Interactions

The binding of tryptophan repressor (TrpR) to its operators was examined quantitatively usingin vitroandin vivomethods. DNA sequence requirements for 1:1 and tandem 2 :1 (TrpR : DNA) binding in various sequence contexts were studied. The results indicate that the optimal half-site sequence for recognition by one helix-turn-helix motif of one TrpR dimer is_{3′ CNTGA 5′}^{5′ GNACT 3′}, consistent with contacts observed by X-ray diffraction analysis of cocrystalline 1:1 and 2 :1 complexes. Half-sites can be paired to form a palindrome either by direct abutment, forming the nucleation site for a tandem 2 :1 complex, or with an 8-base-pair spacer, forming a 1:1 target. Dimethylsulfate (DMS) methylation-protection footprintingin vitroof 1:1 and 2 :1 complexes formed sequentially on the two unequal half-site pairs of thetrpEDCBA operator fromSerratia marcescensindicated an obligate hierarchy of site occupancy, with one half-site pair serving as the nucleation site for tandem binding. DMS footprinting ofEscherichia colioperatorsin vivoshowed that, over a wide range of intracellular TrpR concentration, thetrpEDCBA operator is occupied by three repressor dimers,aroH is occupied by two dimers, and the 1:1 binding mode is used on thetrpR operator. The coexistence of these distinct occupancy states implies that changes in protein concentration affect only the fractional occupancy of each operator rather than the binding mode, which is determined by the number of half-site sequences present in the operator region. Cooperativity of tandem complex formation measured by gel retardation using a symmetrized synthetic operator containing identical, optimal sites spaced as in natural operators was found to be modest, implying a maximum coupling free energy of ∼−2 kcal/mol. On other sequences the apparent degree of cooperativity, as well as the apparent affinity, varied with sequence and sequence context in a manner consistent with the structural models and which suggests compensation between affinity and cooperativity as a mechanism that allows tolerance of operator sequence variation.     

The missing nucleoside experiment: a new technique to study recognition of DNA by protein

We report a new technique for quickly determining which nucleosides in a DNA molecule are contacted by a sequence-specific DNA-binding protein. Our method is related to the recently reported "missing contact" experiment [Brunelle, A., & Schleif, R. F. (1987) Proc. Natl. Acad. Sci. U.S.A. 84, 6673-6679]. We treat the DNA molecule with the hydroxyl radical to randomly remove nucleosides. The ability of protein to bind to gapped DNA is assayed by gel mobility shift. Nucleosides important to protein binding are identified by sequencing gel electrophoresis. The missing nucleoside experiment can be used to scan a DNA molecule at single-nucleotide resolution in one experiment. The bacteriophage lambda repressor-OR1 and cro-OR1 complexes were analyzed to evaluate the method. For both proteins, the most important contacts are located in the protein monomer that binds to the consensus half of the operator. These contacts correspond well to those found by mutational studies, and in the cocrystal structure of the lambda repressor-operator. The missing nucleoside data show that the amino-terminal arms of lambda repressor make energetically important contacts with positions 7 and 8 and the central dyad base pair of the operator. The amino-terminal arm that makes the most extensive contacts to DNA appears to be the one that emanates from the repressor monomer that binds to the consensus half of the operator, in agreement with the cocrystal structure. The lambda cro protein does not have an amino-terminal arm, and the missing nucleoside experiment clearly shows a lack of contacts to DNA in the central region of the operator in this complex.