Successive microsporogenesis in eudicots, with particular reference to Berberidaceae (Ranunculales)

The eudicot clade of angiosperms is characterised by simultaneous microsporogenesis and tricolpate pollen apertures. Successive microsporogenesis, where a distinct dyad stage occurs after the first meiotic division, is relatively rare in eudicots although it occurs in many early branching angiosperms including monocots. An extensive literature survey shows that successive microsporogenesis has arisen independently at least six times in eudicots, in five different orders, including Berberidaceae (Ranunculales). Microsporogenesis and pollen apertures were examined here using light and transmission electron microscopy in eleven species representing six genera of Berberidaceae. Successive microsporogenesis is a synapomorphy for the sister taxa Berberis and Mahonia (and possibly also Ranzania), the remaining genera are simultaneous. Callose wall formation in Berberis and Mahonia is achieved by centripetal furrowing, though centrifugal cell plates are more usual for this microsporogenesis type. This discrepancy could reflect the fact that the successive type in Berberidaceae is derived from the simultaneous type, and centripetal furrowing has been retained. Eudicots with successive microsporogenesis usually produce tetragonal or decussate tetrads, though occasional tetrahedral or irregular tetrads in Berberis and Mahonia indicate that the switch from simultaneous to successive division is incomplete or “leaky”. In contrast, linear tetrads produced by successive microsporogenesis in Asclepiadoideae (Apocynaceae s.l.) are the result of a highly specialised developmental pathway leading to the production of pollinia. Pollen in successive eudicots is dispersed as monads, dyads, tetrads, and as single grains in pollinia. Apertures are diverse, and patterns include spiraperturate, clypeate, irregular, monocolpate, diporate and inaperturate. It is possible that successive microsporogenesis, although rare, potentially occurs in other eudicots, for example, in species where pollen is inaperturate.     

Evolution of pollen morphology in Loranthaceae

Earlier studies indicate a strong correlation of pollen morphology and ultrastructure with taxonomy in Loranthaceae. Using high-resolution light microscopy and scanning electron microscopy imaging of the same pollen grains, we document pollen types of 35 genera including 15 studied for the first time. Using a molecular phylogenetic framework based on currently available sequence data with good genus-coverage, we reconstruct trends in the evolution of Loranthaceae pollen and pinpoint traits of high diagnostic value, partly confirming earlier intuitive hypotheses based on morphological observations. We find that pollen morphology in Loranthaceae is strongly linked to phylogenetic relationships. Some pollen types are diagnostic for discrete genera or evolutionary lineages, opening the avenue to recruit dispersed fossil pollen as age constraints for dated phylogenies and as independent data for testing biogeographic scenarios; so far based exclusively on modern-day data. Correspondences and discrepancies between palynological and molecular data and current taxonomic/systematic concepts are identified and suggestions made for future palynological and molecular investigations of Loranthaceae.     

Promoter analysis of MADS-box genes in eudicots through phylogenetic footprinting

The MIKC MADS-box gene family has been shaped by extensive gene duplications giving rise to subfamilies of genes with distinct functions and expression patterns. However, within these subfamilies the functional assignment is not that clear-cut, and considerable functional redundancy exists. One way to investigate the diversity in regulation present in these subfamilies is promoter sequence analysis. With the advent of genome sequencing projects, we are now able to exert a comparative analysis of Arabidopsis and poplar promoters of MADS-box genes belonging to the same subfamily. Based on the principle of phylogenetic footprinting, sequences conserved between the promoters of homologous genes are thought to be functional. Here, we have investigated the evolution of MADS-box genes at the promoter level and show that many genes have diverged in their regulatory sequences after duplication and/or speciation. Furthermore, using phylogenetic footprinting, a distinction can be made between redundancy, neo/nonfunctionalization, and subfunctionalization.     

Breeding system and bumblebee drone pollination of an explosively pollen‐releasing plant,Meliosma tenuis (Sabiaceae)

• Explosive pollen release is a mechanism used by some angiosperms that serves to attach pollen to a pollinator's body. It is usually adopted by species with zygomorphic tubular flowers and pollinated by birds and bees. The tree genus Meliosma (Sabiaceae, Proteales) has unique disc‐like flowers that are externally actinomorphic, but internally zygomorphic, and release pollen explosively.
• To elucidate the adaptive significance of explosive pollen release, we observed flowering behaviour, the breeding system and pollinator visits to flowers of the Japanese species Meliosma tenuis in a temperate forest. Flowers bloomed in June and were nectariferous and protandrous. Explosive pollen release was triggered by slight tactile stimuli to anther filaments or staminodes in male‐stage flowers.
• Because pollen cannot come into contact with the pistils enclosed by staminodes, M. tenuis is functionally protandrous. Artificial pollination treatments revealed that M. tenuis is allogamous. The dominant flower visitors were nectar‐seeking drones of the bumblebee species Bombus ardens (Apidae). The drones’ behaviour, pollen attachment on their bodies and fruit set of visit‐restricted flowers suggest that they are the only agent triggering the explosive pollen release mechanism, and are the main pollinator of M. tenuis.
• The finding that bumblebee workers rarely visit these flowers suggests that the explosive pollen release has another function, namely to discourage pollen‐harvesting bumblebee workers.

     

The unique pollen morphology of Duparquetia (Leguminosae: Caesalpinioideae): developmental evidence of aperture orientation using confocal microscopy

BACKGROUND AND AIMS: The phylogenetic affinities of the aberrant monotypic genus Duparquetia (subfamily Caesalpinioideae) are at present unresolved. Preliminary results from molecular analyses suggest a basal, isolated position among legumes. A study of Duparquetia pollen was carried out to provide further morphological characters to contribute to multi-data set analyses. Understanding the development of Duparquetia pollen was necessary to clarify the orientation of the apertures. METHODS: Pollen grains and developing microspores were examined using light microscopy, confocal microscopy and scanning electron microscopy. Evidence for the orientation of the apertures was provided by the examination of microspores within developing tetrads, using (a) confocal microscopy to locate the position of the ectoapertures, and (b) light microscopy and Alcian blue stain to locate the position of the endoapertures. KEY RESULTS: Confocal microscopy has been used for the first time to examine developing microspores in order to obtain information on ectoapertures that was unavailable using other techniques. Pollen in Duparquetia develops in tetrahedral tetrads as in other eudicots, with the apertures arranged in a modified pattern following Fischer's rule. Pollen grains are asymmetrical and have one equatorial-encircling ectoaperture with two equatorial endoapertures, a unique feature in Leguminosae, and in eudicots. CONCLUSIONS: The pollen morphology of Duparquetia is so unusual that it provides little information to help determine its closest relatives. However, it does fit with a pattern of greater pollen morphological diversity in the first-branching caesalpinioid legume groups than in the more derived clades. The latitudinal ectoaperture of Duparquetia is unique within the Fabales and eudicot clades, resembling more closely the monosulcate pollen found in monocots and basal angiosperms; however, developmental patterns are recognizably similar to those of all other legume pollen types.     

Flower and fruit characters in the early-divergent lamiid family Metteniusaceae, with particular reference to the evolution of pseudomonomery

Evaluating the morphological relationships of angiosperm families that still remain unplaced in the current systems of classification is challenging because it requires comparative data across a broad phylogenetic range. The small neotropical family Metteniusaceae was recently placed within the lamiids, as sister to either the enigmatic Oncothecaceae or the clade (Boraginaceae + Gentianales + Lamiales + Solanales + Vahliaceae). We examined the development of two of the primary diagnostic traits of Metteniusaceae, the moniliform anthers and the unilocular gynoecium. The gynoecium is 5-carpellate, and contains two ovules with a massive, vascularized integument. Late sympetaly and unitegmic ovules support placement of Metteniusaceae in the lamiids. The 5-carpellate gynoecium is consistent with a sister-group relationship between Metteniusaceae and Oncothecaceae. The gynoecium of Metteniusaceae is unusual in that it is monosymmetric throughout ontogeny, which indicates pseudomonomery; the five carpel initials are congenitally fused by their margins and form a single locule; the two ovules develop from the two smallest and most poorly developed lateral carpels. Comparisons with other pseudomonomerous taxa allow us to propose division of the complex processes leading to pseudomonomery into eight characters, including carpel number and fusion, gynoecial symmetry, timing of carpel reduction, and number and position of nonfertile carpels.     

Evolution of pollen,stigmas and ovule numbers at the caesalpinioid–mimosoid interface (Fabaceae)

In this study we examine the pollen, stigmas and ovaries from 62 collections of herbarium material representing 16 genera, using light and scanning electron microscopy. The caesalpinioid Dimorphandra group (Burkea, Dimorphandra, Erythrophleum, Mora, Pachyelasma, Stachyothyrsus and Sympetalandra) pollen grains are small, tricolporate monads, with perforate or psilate ornamentation. Dinizia, Pentaclethra and Aubrevillea have morphological characters that have suggested either a mimosoid or caesalpinioid placement. Dinizia pollen is in permanent tetrads with clavate ornamentation. Pentaclethra pollen grains are monads, two species have tricolporate pollen and the third is porate. Aubrevillea has tricolporate, finely reticulate monads. All ten genera have variable, non‐predictable stigma type and ovule number. The mimosoid Adenanthera group (Adenanthera, Tetrapleura, Amblygonocarpus, Pseudoprosopis, Calpocalyx and Xylia) pollen grains are in 8‐ to 16‐grain polyads. In all Adenanthera group species, the stigmatic cavity is only large enough to accommodate one polyad. In addition, the number of ovules present matches the number of pollen units in one polyad. Polyads have porate, operculate apertures that differ in layout, aperture morphology and development when compared with caesalpinioid and other eudicot pollen. © 2010 The Linnean Society of London, Botanical Journal of the Linnean Society, 2010, 162 , 594–615.     

中国植物花粉形态的研究进展

中国植物花粉形态研究经历了3个发展阶段;从1953年建立国内第一个孢粉学实验室到1960年我国第一部花粉形态学专著的出版为起步阶段;1961-1980年由于历史的原因,国内的研究发展较慢;80年代以来,中国植物花粉形态学研究进入了一个高速发展阶段。迄今已系统研究过花粉形态的在中国裸子植物中占63.64%。在双子叶植物中占36.36%,在单子叶植物中占33.33%。     

Entomophilous pollen incidence with reference to atmospheric dispersal in eastern India

This paper presents atmospheric pollen concentrations of fifteen entomophilous trees of Eastern India. The period of anthesis and anther dehiscence varied from morning to evening. Insects and other flower visitors were found to accelerate the mechanism of pollen dispersal. The highest pollen concentration was for 267/m³ in Aegle marmelos followed in decreasing order by Eucalyptus globosus (207/m³), Cassia siamea (186/m³), C. fistula (180/m³), Delonix regia (171/m³), Butea monosperma (159/m³), Bombax ceiba (156/m³), Tectona grandis (144/m³), Terminalia arjuna (138/m³), Moringa oleifera (126/m³), Anthocephalus chinensis (114/m³), Syzygium cumini (96/m³), Dillenia indica (30/m³), Syzygium jambos (27/m³), and Kleinhovia hospita (2/m³).     

Seed set,pollen morphology and pollen surface composition response to heat stress in field pea

Pea (Pisum sativum L.) is a major legume crop grown in a semi‐arid climate in Western Canada, where heat stress affects pollination, seed set and yield. Seed set and pod growth characteristics, along with in vitro percentage pollen germination, pollen tube growth and pollen surface composition, were measured in two pea cultivars (CDC Golden and CDC Sage) subjected to five maximum temperature regimes ranging from 24 to 36 °C. Heat stress reduced percentage pollen germination, pollen tube length, pod length, seed number per pod, and the seed–ovule ratio. Percentage pollen germination of CDC Sage was greater than CDC Golden at 36 °C. No visible morphological differences in pollen grains or the pollen surface were observed between the heat and control‐treated pea. However, pollen wall (intine) thickness increased due to heat stress. Mid‐infrared attenuated total reflectance (MIR‐ATR) spectra revealed that the chemical composition (lipid, proteins and carbohydrates) of each cultivar's pollen grains responded differently to heat stress. The lipid region of the pollen coat and exine of CDC Sage was more stable compared with CDC Golden at 36 °C. Secondary derivatives of ATR spectra indicated the presence of two lipid types, with different amounts present in pollen grains from each cultivar.     

Ultrastructure of the vegetative cell ofBrassica napus pollen with particular reference to microbodies

Summary The ultrastructure of the vegetative cell ofBrassica napus tricellular pollen grains, just before anthesis with standard chemical fixation, is reported. The vegetative cell may be regarded as a highly differentiated and metabolically active fat-storage cell. It contains many mitochondria with a well developed internal membrane system, starchless plastids, microbodies, lipid bodies, dictyosomes and numerous vesicles thought to originate from the dictysomes. Rough endoplasmic reticulum organized in stacks of cisternae is also spatially associated with certain organelles, mainly lipid bodies, microbodies and plastids. There are also randomly distributed polyribosome areas. The microbodies are mainly polymorphic in shape and are often observed in contact with lipid bodies. The above spatial relationship implies that the microbodies may have a glyoxysomal function. In the late period of vegetative cell maturation, the microbodies are probably involved in the process of glyconeogenesis in which the conversion of lipid reserves to sugar takes place.Abbreviations VC vegetative cell - VN vegetative nucleus - SC sperm cell - M mitochondria - MB microbodies - L lipid body - P plastid - D dictyosomes     

不同品种烟草花粉电子显微镜观察

通过对10个烤烟品种、8个晒烟品种、2个野生种的花粉进行扫描电子显微镜观察,发现同为烤烟或晒烟的烟草,其花粉的形态、大小、外壁纹饰比较稳定。野生烟在供试种中具有独特的细网状外壁纹饰,是鉴别野生烟与非野生烟的一条有效途径。     

The systematic value of pollen morphology in Smilacaceae

Smilacaceae are a small family of dioecious, mostly climbing, net-veined monocotyledons with a cosmopolitan distribution. Relatively little is known about the variation of pollen morphology within the family. For this reason, and to investigate the systematic value of palynology in Smilacaceae, pollen from 125 species of Smilax, Heterosmilax, and Ripogonum was examined using light and scanning electron microscopy. Ten of these were examined further by transmission electron microscopy. Four distinct pollen types grouped into two major pollen classes were distinguished: Class 1, represented by the pollen of all Smilax and Heterosmilax species, is mostly spheroidal, inaperturate, and spinulate or microspinulate, with a thin, fragile exine of varied sculpturing; three pollen types are represented within this class. Class 2 is found only in Ripogonum and contains a single pollen type with prolate, monosulcate, reticulately-sculptured pollen. The unique pollen morphology of Ripogonum supports its removal from Smilacaceae. In contrast, the characteristics of Heterosmilax pollen intergrade with those seen in Smilax, suggesting that the former might be better reduced to synonymy with the latter. A key to the identification of these pollen types is presented along with a discussion of geographic and possible evolutionary trends among them.     

Effects of soil phosphorus on pollen production,pollen size,pollen phosphorus content,and the ability to sire seeds in Cucurbita pepo (Cucurbitaceae)

To determine the effects of soil phosphorus on pollen production, pollen grain size, phosphate concentration per pollen grain, and the siring ability of pollen, two cultivars of the common zucchini (Cucurbita pepo) were grown under two soil phosphorus conditions in an experimental garden. Overall, soil phosphorus availability had a significant effect on reproductive output through the female function and on traits affecting the male function of plants (staminate flower production, pollen production per flower, and pollen grain size). In addition, pollen produced by plants in the high phosphorus soils had a higher phosphate concentration than pollen produced by plants in the low phosphorus soils. A pollen mixture experiment revealed that pollen produced by plants in the high phosphorus treatment sired significantly more seeds than pollen produced by plants in the low phosphorus treatment. This study showed that growing conditions such as soil phosphorus can influence the size of a pollen grain and its chemical composition, which, in turn, can affect its ability to sire mature seeds.     

葫芦科8属11种植物花粉形态的扫描电镜观察

利用扫描电子显微镜,对葫芦科8属10种1变种植物的花粉形态进行观察研究。结果显示:冬瓜属、葫芦属和栝楼属的花粉粒为近球形,具3孔沟;苦瓜属、西瓜属和丝瓜属的花粉粒为长球形,具3沟;黄瓜属的花粉粒为近球形,具3孔;南瓜属的花粉粒为球形,具散孔。花粉粒大小、形状和外壁雕纹属、种间差异显著。