Effect of additives on the release of a model protein from PLGA microspheres

The purpose of this study was to investigate the effect of 2 additives, poly(ethylene glycol (PEG) 1000 and 1,2,3-tridecanoyl glycerol (tricaprin), on the physico-chemical characteristics and in vitro release of a model protein, bovine serum albumin (BSA), form poly(D,L-lactic-co-glycolic acid) (PLGA) microspheres. BSA-loaded microspheres were prepared by the double emulsion solvent evaporation method. Additives were incorporated into microspheres to modify the release of protein. The addition of PEG 1000 and tricaprin changed the surface characteristics of microspheres from smooth and nonporous to porous and dimpled, respectively. The in vitro release profiles showed that the additives significantly (P<0.05) increased the early-stage release of BSA from microspheres.     

Identification of chemically modified peptide from poly(D,L-lactide-co-glycolide) microspheres under in vitro release conditions

The purpose of this research was to study the chemical reactivity of a somatostatin analogue octreotide acetate, formulated in microspheres with polymers of varying molecular weight and co-monomer ratio under in vitro testing conditions. Poly(D,L-lactide-co-glycolide) (PLGA) and poly(D,L-lactide) (PLA) microspheres were prepared by a solvent extraction/evaporation method. The microspheres were characterized for drug load, impurity content, and particle size. Further, the microspheres were subjected to in vitro release testing in acetate buffer (pH 4.0) and phosphate buffered saline (PBS) (pH 7.2). In acetate buffer, 3 microsphere batches composed of low molecular weight PLGA 50∶50, PLGA 85∶15, and PLA polymers (≤10 kDa) showed 100% release with minimal impurity formation (<10%). The high molecular weight PLGA 50∶50 microspheres (28 kDa) displayed only 70% cumulative release in acetate buffer with significant impurity formation (∼24%). In PBS (pH 7.4), on the other hand, only 50% release was observed with the same low molecular weight batches (PLGA 50∶50, PLGA 85∶15, and PLA) with higher percentages of hydrophobic impurity formation (ie, 40%, 26%, and 10%, respectively). In addition, in PBS, the high molecular weight PLGA 50∶50 microspheres showed only 20% drug release with ∼60% mean impurity content. The chemically modified peptide impurities inside microspheres were structurally confirmed through Fourier transform-mass spectrometry (FT-MS) and liquid chromatography/mass spectrometry (LC-MS/MS) analyses after extraction procedures. The adduct compounds were identified as covalently modified conjugates of octreotide with lactic and glycolic acid monomers within polymeric microspheres. The data suggest that due to steric hindrance factors, polymers with greater lactide content were less amenable to the formation of adduct impurities compared with PLGA 50∶50 copolymers.     

Formulation and evaluation of ketorolac tromethamine-loaded albumin microspheres for potential intramuscular administration

The objective of this work was to prepare and evaluate ketorolac tromethamine-loaded albumin microspheres using a factorial design. Albumin microspheres were prepared by emulsion cross-linking method. Selected formulations were characterized for their entrapment efficiency, particle size, surface morphology, and release behavior. Analysis of variance (ANOVA) for entrapment efficiency indicated that entrapment efficiency is best fitted to a response surface linear model. From the statistical analysis it was observed that as the drug:polymer (D∶P) ratio and volume of glutaraldehyde increased, there was a significant increase in the encapsulation efficiency. Scanning electron microscopy of the microspheres revealed a spherical, nonporous and uniform appearance, with a smooth surface. Based on the entrapment efficiency and physical appearance, 9 formulations were selected for release study. The maximum particle size observed was below 40 μm. The release pattern was biphasic, characterized by an initial burst effect followed by a slow release. All selected microspheres, except those having less polymer proportion (D∶P ratio is 1∶1), exhibited a prolonged release for almost 24 hours. On comparingr ² values for Higuchi and Peppas kinetic models, different batches of microspheres showed Fickian, non-Fickian, and diffusion kinetics. The release mechanism was regulated by D∶P ratio and amount of cross-linking agent. From the experimental data obtained with respect to particle size and extent of drug relaase, it could be concluded that the prepared microspheres are useful for once-a-day intramuscular administration of ketorolac tromethamine. Published: February 23, 2007     

Evaluation of orntide microspheres in a rat animal model and correlation to in vitro release profiles

Orntide acetate, a novel luteinizing hormone-releasing hormone (LHRH) antagonist, was prepared and evaluated in vivo in 30-day and 120-day sustained delivery formulations using a rat animal model. Orntide poly(d,l- lactide-co-glycolide) (PLGA) and poly(d,l- lactide) (PLA) microspheres were prepared by a dispersion method and administered subcutaneously in a liquid vehicle to rats at 2.2 mg Orntide/kg of body weight (30-day forms) or 8.8 mg Orntide/kg (120-day forms). Serum levels of Orntide and testosterone were monitored by radioimmunoassays, and a dose-response study at 4 closes (3, 2.25, 1.5, and 1.75 mg Orntide/kg) was conducted to determine the effective dose of Orntide. Microspheres with diameters between 3.9 and 14 μ were prepared. The onset and duration of testosterone suppression varied for different microsphere formulations and were influenced both by polymer properties and by microsphere characteristics. Microspheres prepared with 50∶50 and 75∶25 copolymers effectively sustained peptide release for 14 to 28 days, whereas an 85∶15 copolymer and the PLA microspheres extended the pharmacological response for more than 120 days. Increase in drug load generally accelerated peptide release from the microspheres, resulting in higher initial serum levels of Orntide and shorter duration of the release: In general, apparent release was faster in vivo than under in vitro conditions. Orntide microspheres effectively suppressed testosterone in rats, providing rapid onset of release and extended periods of chemical castration. Testosterone suppression occurred immediately after microsphere administration without the initial elevation seen with LHRH superagonists.     

Albumin microspheres as carriers for the antiarthritic drug celecoxib

The present study investigates the preparation of celecoxib-loaded albumin microspheres and the biodistribution of technetium-99m (^99mTc)-labeled celecoxib as well as its microspheres after intravenous administration. Microspheres were prepared using a natural polymer BSA using emulsification chemical cross-linking method. The prepared microspheres were characterized for entrapment efficiency, particle size, and in vitro drug release. Surface morphology was studied by scanning electron microscopy. Biodistribution studies were performed by radiolabeling celecoxib (CS) and its microspheres (CMS) using^99mTc and injecting arthritic rats intravenously. The geometric mean diameter of the microspheres was found to be 5.46 μm. In vitro release studies indicated that the microspheres sustained the release of the drug for }6 days. Radioactivity measured in different organs after intravenous administration of celecoxib solution showed a significant amount of radioactivity in the liver and spleen. In case of celecoxib-loaded microspheres, a significant amount of radioactivity accumulated in the lungs. No significant difference (P>.1) in the radioactivity was observed between the inflamed joint and the noninflamed joint following intravenous injection of^99mTc-CS. However, in case of the microspheres (CMS), the radioactivity present in the inflamed joint was 2.5-fold higher than in the noninflamed joint. The blood kinetic studies revealed that celecoxib-loaded albumin microspheres exhibited prolonged circulation than the celecoxib solution.     

Capacitation of bovine spermatozoa by lysophospholipids and trypsin

Bovine spermatozoa were incubated in vitro with lysophosphatidylserine (LPS), lysophosphatidylcholine (LPC), lysophosphatidylethanolamine (LPE), lysophosphatidylinositol (LPI), or trypsin. Capacitation of sperm was evaluated by penetration of the zonae pellucidae of dead bovine oocytes. Capacitation times could be shortened to 3 h or less by treatment of spermatozoa with each of these lysophospholipids (LPLs) (P < .05). The maximum oocyte penetration percentages for individual LPLs were 40% for 10 μM LPS, 24% for 160 μM LPC, 31% for 320 μM LPE, and 19% for 320 μM LPI. Capacitation also was facilitated (P < .01) by trypsin treatment of spermatozoa. Spermatozoa treated with 250 or 2,500 units/ml of trypsin penetrated more oocytes (17 and 18%) than spermatozoa treated with 0 or 25 units/ml of trypsin (0 and 3%). Spermatozoa treated with increasing concentrations of LPL showed a decrease in both the percentage of intact acrosomes and of progressively motile spermatozoa. Increasing levels of trypsin in the incubation medium also led to a decrease (P < .05) in the percentages of intact acrosomes and a decrease (P < .01) in the percentages of progressively motile spermatozoa. Percentages of live, ovulated oocytes fertilized by spermatozoa incubated for 1 h in LPS (86%, 6/7) were not different from those incubated for 24 h in control medium (71%, 5/7). Percentages of oocytes fertilized with both of these capacitation treatments were higher (P < .05) than for oocytes exposed or killed or uncapacitated sperm. Rapid induction of capacitation and the acrosome reaction can be accomplished by exogenous treatment of bovine sperm with lysophospholipids or trypsin.     

Intragastric floating drug delivery system of cefuroxime axetil: In vitro evaluation

This investigation describes the development of an intragastric drug-delivery system for cefuroxime axetil. The 3² full factorial design was employed to evaluate contribution of hydroxypropyl methyl cellulose (HPMC) K4M/HPMC K100 LV ratio (polymer blend) and sodium lauryl sulfate (SLS) on drug release from HPMC matrices. Tablets were prepared using direct compression technique. Formulations were evaluated for in vitro buoyancy and drug release study using United States Pharmacopeia (USP) 24 paddletype dissolution apparatus using 0.1N HCl as a dissolution medium. Multiple regression analysis was performed for factorial design batches to evaluate the response. All formulations had floating lag times below 2 minutes and constantly floated on dissolution medium for more than 8 hours. It was found that polymer blend and SLS significantly affect the time required for 50% of drug release, percentage drug release at 12 hours, release rate constant, and diffusion exponent (P<.05). Also linear relationships were obtained between the amount of HPMC K100 LV and diffusion exponent as well as release rate constant. Kinetic treatment to dissolution profiles revealed drug release ranges from anomalous transport to case 1 transport, which was mainly dependent on both the independent variables. Published: February 24, 2006     

Preparation of biodegradable microspheres and matrix devices containing naltrexone

In this study, the use of biodegradable polymers for microencapsulation of naltrexone using solvent evaporation technique is investigated. The use of naltrexone microspheres for the preparation of matrix devices is also studied. For this purpose, poly(L-lactide) (PLA) microspheres containing naltrexone prepared by solvent evaporation technique were compressed at temperatures above the Tg of the polymer. The effect of different process parameters, such as drug/polymer ratio and stirring rate during preparation of microspheres, on the morphology, size distribution, and in vitro drug release of microspheres was studied. As expected, stirring rate influenced particle size distribution of microspheres and hence drug release profiles. By increasing the stirring speed from 400 to 1200 rpm, the mean diameter of microspheres decreased from 251 μm to 104 μm. The drug release rate from smaller microspheres was faster than from larger microspheres. However, drug release from microspheres with low drug content (20% wt/wt) was not affected by the particle size of microspheres. Increasing the drug content of microspheres from 20% to 50% wt/wt led to significantly faster drug release from microspheres. It was also shown that drug release from matrix devices prepared by compression of naltrexone microspheres is much slower than that of microspheres. No burst release was observed with matrix devices. Applying higher compression force, when compressing microspheres to produce tablets, resulted in lower drug release from matrix devices. The results suggest that by regulating different variables, desired release profiles of naltrexone can be achieved using a PLA microparticulate system or matrix devices.     

Formulation and optimization of controlled release mucoadhesive tablets of atenolol using response surface methodology

The aim of the current study was to design oral controlled release mucoadhesive compressed hydrophilic matrices of atenolol and to optimize the drug release profile and bioadhesion using response surface methodology. Tablets were prepared by direct compression and evaluated for bioadhesive strength and in vitro dissolution parameters. A central composite design for 2 factors at 3 levels each was employed to systematically optimize drug release profile and bioadhesive strength. Carbopol 934P and sodium carboxymethylcellulose were taken as the independent variables. Response surface plots and contour plots were drawn, and optimum formulations were selected by feasibility and grid searches. Compressed matrices exhibited non-Fickian drug release kinetics approaching zero-order, as the value of release rate exponent (n) varied between 0.6672 and 0.8646, resulting in regulated and complete release until 24 hours. Both the polymers had significant effect on the bioadhesive strength of the tablets, measured as force of detachment against porcine gastric mucosa (P<.001). Polynomial mathematical models, generated for various response variables using multiple linear regression analysis, were found to be statistically significant (P<.01). Validation of optimization study, performed using 8 confirmatory runs, indicated very high degree of prognostic ability of response surface methodology, with mean percentage error (±SD) as −0.0072±1.087. Besides unraveling the effect of the 2 factors on the various response variables, the study helped in finding the optimum formulation with excellent bioadhesive strength and controlled release. Published: January 13, 2006     

Investigation on Processing Variables for the Preparation of Fluconazole-Loaded Ethyl Cellulose Microspheres by Modified Multiple Emulsion Technique

Fluconazole-loaded ethyl cellulose microspheres were prepared by alginate facilitated (water-in-oil)-in-water emulsion technology and the effects of various processing variables on the properties of microspheres were investigated. Scanning electron microscopy revealed spherical nature and smooth surface morphology of the microspheres except those prepared at higher concentration of emulsifiers and higher stirring speeds. The size of microspheres varied between 228 and 592 μm, and as high as 80% drug entrapment efficiency was obtained depending upon the processing variables. When compared up to 2 h, the drug release in pH 1.2 HCl solution was slower than in pH 7.4 phosphate buffer saline solution. However, this trend was reversed at high shear conditions. The microspheres provided extended drug release in alkaline dissolution medium and the drug release was found to be controlled by Fickian-diffusion mechanism. However, the mechanism shifted to anomalous diffusion at high shear rates and emulsifier concentrations. The aging of microspheres did not influence the drug release kinetics. However, the physical interaction between drug and excipients affected the drug dissolution behaviors. X-ray diffractometry (X-RD) and differential scanning calorimetry (DSC) analysis revealed amorphous nature of drug in the microspheres. Fourier transform infrared (FTIR) spectroscopy indicated stable character of fluconazole in the microspheres. The stability testing data also supported the stable nature of fluconazole in the microspheres. The fluconazole extracted from 80% drug-loaded formulation showed good in vitro antifungal activity against Candida albicans. Thus, proper control of the processing variables involved in this modified multiple emulsion technology could allow effective incorporation of slightly water soluble drugs into ethyl cellulose microspheres without affecting drug stability.     

Eudragit-coated pectin microspheres of 5-fluorouracil for colon targeting

An objective of the present investigation was to prepare and evaluate Eudragit-coated pectin microspheres for colon targeting of 5-fluorouracil (FU). Pectin microspheres were prepared by emulsion dehydration method using different ratios of FU and pectin (1:3 to 1:6), stirring speeds (500–2000 rpm) and emulsifier concentrations (0.75%–1.5% wt/vol). The yield of preparation and the encapsulation efficiencies were high for all pectin microspheres. Microspheres prepared by using drug:polymer ratio 1:4, stirring speed 1000 rpm, and 1.25% wt/vol concentration of emulsifying agent were selected as an optimized formulation. Eudragit-coating of pectin microspheres was performed by oil-in-oil solvent evaporation method using coat: core ratio (5:1). Pectin microspheres and Eudragit-coated pectin microspheres were evaluated for surface morphology, particle size and size distribution, swellability, percentage drug entrapment, and in vitro drug release in simulated gastrointestinal fluids (SGF). The in vitro drug release study of optimized formulation was also performed in simulated colonic fluid in the presence of 2% rat cecal content. Organ distribution study in albino rats was performed to establish the targeting potential of optimized formulation in the colon. The release profile of FU from Eudragit-coated pectin microspheres was pH dependent. In acidic medium, the release rate was much slower; however, the drug was released quickly at pH 7.4. It is concluded from the present investigation that Eudragit-coated pectin microspheres are promising controlled release carriers for colon-targeted delivery of FU. Published: February 16, 2007     

Aldehyde dehydrogenase 2 inhibition potentiates 4-hydroxy-2-nonenal induced decrease in angiogenesis of coronary endothelial cells

Coronary endothelial cell (EC) dysfunction including defective angiogenesis is reported in cardiac diseases. 4-Hydroxynonenal (4HNE) is a lipid peroxidation product, which is increased in cardiac diseases and implicated in cellular toxicity. Aldehyde dehydrogenase (ALDH) 2 is a mitochondrial enzyme that metabolizes 4HNE and reduces 4HNE-mediated cytotoxicity. Thus, we hypothesize that ALDH2 inhibition potentiates 4HNE-mediated decrease in coronary EC angiogenesis in vitro. To test our hypothesis, first, we treated the cultured mouse coronary EC (MCEC) lines with 4HNE (25, 50, and 75 μM) for 2 and 4 hours. Next, we pharmacologically inhibited ALDH2 by disulfiram (DSF) (2.5 μM) before challenging the cells with 4HNE. In this study, we found that 4HNE attenuated tube formation which indicates decreased angiogenesis. Next, we found that 4HNE has significantly downregulated the expressions of vascular endothelial growth factor receptor (VEGFR) 2 (P < .05 for mRNA and P = .005 for protein), Sirtuin 1 (SIRT 1) (P < 0.0005 for mRNA), and Ets-related gene (ERG) (P < 0.0001 for mRNA and P < 0.005 for protein) in MCECs compared with control. ALDH 2 inhibition by DSF potentiated 4HNE-induced decrease in angiogenesis (P < 0.05 vs 4HNE at 2 h and P < 0.0005 vs 4HNE at 4 h) by decreasing the expressions of VEGFR2 (P < 0.005 for both mRNA and protein), SIRT 1 (P < 0.05), and ERG (P < 0.005) relative to 4HNE alone. Thus, we conclude that ALDH2 acts as a proangiogenic signaling molecule by alleviating the antiangiogenic effects of 4HNE in MCECs.     

Evaluation of mucoadhesive hydrogels loaded with diclofenac sodium-chitosan microspheres for rectal administration

Considering the advantageous for the rectal administration of non-steroidal anti-inflammatory drugs, the objective of this study was to formulate and evaluate rectal mucoadhesive hydrogels loaded with diclofenac-sodium chitosan (DFS-CS) microspheres. Hydroxypropyl methylcellulose (HPMC; 5%, 6%, and 7% w/w) and Carbopol 934 (1% w/w) hydrogels containing DFS-CS microspheres equivalent to 1% w/w active drug were prepared. The physicochemical characterization revealed that all hydrogels had a suitable pH for rectal application (6.5–7.4). The consistency of HPMC hydrogels showed direct proportionality to the concentration of the gelling agent, while carbopol 934 gel showed its difficulty for rectal administration. Farrow’s constant for all hydrogels were greater than one indicating pseudoplastic flow. In vitro drug release from the mucoadhesive hydrogel formulations showed a controlled drug release pattern, reaching 34.6–39.7% after 6 h. The kinetic analysis of the release data revealed that zero-order was the prominent release mechanism. The mucoadhesion time of 7% w/w HPMC hydrogel was 330 min, allowing the loaded microspheres to be attached to the surface of rectal mucosa. Histopathological examination demonstrated the lowest irritant response to the hydrogel loaded with DFS-CS microspheres in response to other forms of the drug.     

The Effect of Mixing Prunings of Two Tropical Shrub Legumes (Calliandra Houstoniana and Indigofera zollingeriana) with Contrasting Quality on N Release in the Soil and Apparent N Degradation in the Rumen

Lack of synchronization between N released from prunings applied to the soil as green manures and crop uptake as well as optimization of protein digestibility for ruminants, remain major research objectives for the selection of multipurpose tree and shrub legumes (MPT) for mixed smallholder systems in the tropics. Prunings of the high tannin, low quality MPT Calliandra houstoniana CIAT 20400 (Calliandra) and the tannin free, high quality MPT Indigofera zollingeriana (Indigofera) were mixed in the proportions 100:0, 75:25, 50:50, 25:75, and 0:100 (w/w) in order to measure the aerobic rate and extent of N release in a leaching tube experiment, and the anaerobic extent of N degradation in an in vitro gas production experiment. Parameters measured in Calliandra:Indigofera mixtures were compared to theoretical values derived from single species plant material (i.e. 100:0 and 0:100). Aerobic N release and apparent anaerobic N degradation increased with increasing proportion of the high quality legume (Indigofera) in the mixture. While N release in the soil was lower than theoretical values in the mixture 50% Calliandra/50% Indigofera, this was not the case with apparent anaerobic N degradation with the same mixture. Aerobic N immobilization was more pronounced for the mixture 75% Calliandra/25% Indigofera than for 100% Calliandra and negative interaction was observed with apparent anaerobic N degradation in the mixture 75% Calliandra/25% Indigofera. Plant quality parameters that best correlated with aerobic N release and apparent anaerobic N degradation in the rumen were lignin + bound condensed tannins (r=−0.95 and −0.95 respectively, P<0.001). In addition, a positive correlation (r=0.89, P<0.001) was found between aerobic N release in the leaching tube experiment and apparent N degradation in the in vitro anaerobic gas production experiment. Results show that mixing prunings of MPT materials with contrasting quality is an effective way to modify aerobic N release pattern as well as apparent anaerobic N degradation and could possibly be applied to minimize N losses in the rumen and in the soil. In addition, apparent anaerobic N degradation was identified as good predictor of aerobic N release in the soil, which has resource saving implications when screening MTP to be used as green manures.     

Eudragit S100 entrapped insulin microspheres for oral delivery

The purpose of this research was to investigate whether Eudragit S100 microspheres have the potential to serve as an oral carrier for peptide drugs like insulin. Microspheres were prepared using water-in oil-in water emulsion solvent evaporation technique with polysorbate 20 as a dispersing agent in the internal aqueous phase and polyvinyl alcohol (PVA)/polyvinyl pyrrolidone as a stabilizer in the external aqueous phase. The use of smaller internal aqueous-phase volume (50 μL) and external aqueous-phase volume (25 mL) containing PVA in the manufacturing process resulted in maximum encapsulation efficiency (81.8%±0.9%). PVA-stabilized microspheres having maximum drug encapsulation released 2.5% insulin at pH 1.0 in 2 hours. In phosphate buffer (pH 7.4), microspheres showed an initial burst release of 22% in 1 hour with an additional 28% release in the next 5 hours. The smaller the volumes of internal and external aqueous phase, the lower the initial burst release. The release of drug from microspheres followed Higuchi kinetics. Scanning electron microscopy of PVA-stabilized microspheres demonstrated spherical particles with smooth surface, and laser diffractometry revealed a mena particle size of 32.51±20 μm. Oral administration of PVA stabilized microspheres in normal albino rabbits (equivalent to 6.6 IU insulin/kg of animal weight) demonstrated a 24% reduction in blood glucose level, with maximum plasma glucose reduction of 76±3.0% in 2 hours and effect continuing up to 6 hours. The area under the percentage glucose reduction-time curve was 93.75%. Thus, our results indicate that Eudragit S100 microspheres on oral administration can protect insulin from proteolytic degradation in the gastrointestinal tract and produce hypoglycemic effect.     

Insulin stimulates GDP release from G proteins in the rat and human liver plasma membranes

Plasma membranes (1–2 mg protein) prepared from the livers of adult male rats and human organ donors were incubated with 0.6 μM [α-³²P] guanosine triphosphate (GTP) in an adenosine triphosphate (ATP)-regenerating buffer at 37°C for 1 h; during this incubation, the [³²P]GTP is hydrolyzed and the nucleotide that is predominantly bound to the membranes is [³²P] guanosine diphosphate (GDP). [³²P]GDP release from the liver membranes was proportional to the protein concentration and increased as a function of time. At 5 mM, Ca²⁺, Mg²⁺, Mn²⁺, and Zn²⁺ maximally inhibited GDP release by 80–90%, whereas, 5 mM Cu²⁺ maximally stimulated the reaction by 100%. Therefore, cations were not included in the buffer used in the GDP release step. One μM Gpp(NH)p (5′-guanylylimidodiphosphate), a nonhydrolyzable analog of GTP, maximally stimulated [³²P]GDP release in the liver membranes by up to 30%. Although 10 nM Gpp(NH)p had no effect on GDP release, it appeared to stabilize the hormonal effect by blocking further GDP/GTP exchange. In the rat membranes, 1–100 nM glucagon (used as a positive control) stimulated [³²P]GDP release by about 17% (P < .05); similarly, 0.1–100 nM insulin stimulated [³²P]GDP release by 10–13% (P < .05). In the human membranes, 10 pM to 100 nM insulin stimulated [³²P]GDP release by 7–10%. In the rat membranes, 10 nM insulin stimulated [³²P]GDP release by 17 and 24% at 2 and 4 min, respectively (P < .05); in the human membranes, 10 nM insulin stimulated [³²P]GDP release by about 9% at 2 and 4 min. Normal rabbit IgG (used as a control for insulin receptor antibody) by itself stimulated the GDP release by rat and human membranes. However, the stimulation of the GDP release by insulin receptor antibody was consistently higher than that observed with normal rabbit IgG. Four to 15 μg of insulin receptor antibody stimulated [³²P]GDP release by 12–22% (P < .05) and 7–14% in rat and human membranes, respectively. These results indicate that ligand binding to the insulin receptor results in a functional interaction of the receptor with a guanine nucleotide-binding transducer protein (G protein) and activation of GTP/GDP exchange.     

Characterization of 5-fluorouracil microspheres for colonic delivery

The purpose of this investigation was to prepare and evaluate the colon-specific microspheres of 5-fluorouracil for the treatment of colon cancer. Core microspheres of alginate were prepared by the modified emulsification method in liquid paraffin and by cross-linking with calcium chloride. The core microspheres were coated with Eudragit S-100 by the solvent evaporation technique to prevent drug release in the stomach and small intestine. The microspheres were characterized by shape, size, surface morphology, size distribution, incorporation efficiency, and in vitro drug release studies. The outer surfaces of the core and coated microspheres, which were spherical in shape, were rough and smooth, respectively. The size of the core microspheres ranged from 22 to 55 μm, and the size of the coated microspheres ranged from 103 to 185 μm. The core microspheres sustained the drug release for 10 hours. The release studies of coated microspheres were performed in a pH progression medium mimicking the conditions of the gastrointestinal tract. Release was sustained for up to 20 hours in formulations with core microspheres to a Eudragit S-100 coat ratio of 1∶7, and there were no changes in the size, shape, drug content, differential scanning calorimetry thermogram, and in vitro drug release after storage at 40°C/75% relative humidity for 6 months.     

Alginate microspheres encapsulated with autoclaved Leishmania major (ALM) and CpG-ODN induced partial protection and enhanced immune response against murine model of leishmaniasis

A suitable adjuvant and delivery system are needed to enhance efficacy of vaccines against leishmaniasis. In this study, alginate microspheres as an antigen delivery system and CpG-ODN as an immunoadjuvant were used to enhance immune response and induce protection against an experimental autoclaved Leishmania major (ALM) vaccine. Alginate microspheres were prepared by an emulsification technique and the characteristics of the preparation such as size, encapsulation efficiency and release profile of encapsulates were studied. Mean diameter of microspheres was determined using SEM (Scanning Electron Microscopy) and particle size analyzer. The encapsulation efficiency was determined using Lowry protein assay method. The integrity of ALM antigens was assessed using SDS–PAGE. Mean diameter of microspheres was 1.8 ± 1.0 μm. BALB/c mice were immunized three times in 3-weeks intervals with ALM + CpG-ODN loaded microspheres [(ALM + CpG)_ALG], ALM encapsulated alginate microspheres [(ALM)_ALG], (ALM)_ALG + CpG, ALM + CpG, ALM alone or PBS. The intensity of infection induced by L. major challenge was assessed by measuring size of footpad swelling. The strongest protection was observed in group of mice immunized with (ALM + CpG)_ALG. The groups of mice received (ALM + CpG)_ALG, (ALM)_ALG + CpG, (ALM)_ALG and ALM + CpG were also showed a significantly (P < 0.05) smaller footpad swelling compared with the group that received either ALM alone or PBS. The mice immunized with (ALM + CpG)_ALG or ALM + CpG showed the significantly (P < 0.05) highest IgG2a/IgG1 ratio. The IFN-γ level was significantly (P < 0.0001) highest in group of mice immunized with either (ALM)_ALG + CpG or ALM + CpG. It is concluded that alginate microspheres and CpG-ODN adjuvant when are used simultaneously induced protection and enhanced immune response against ALM antigen.     

Influence of serum and hormones on bovine oocyte maturation and fertilization in vitro

Three approaches were investigated for improvement of in vitro maturation (IVM), in vitro fertilization (IVF), and early embryonic development in cattle. These were: 1) Selection of oocytes, 2) medium supplementation with fetal calf serum (FCS) and cow sera (DO, Dl, D10, and D20 to correspond with estrus, metestrus, diestrus, and proestrus, respectively), and 3) addition of follicle-stimulating hormone (FSH), luteinizing hormone (LH), and estradiol-17β (E₂)during maturation. Greater proportions (percentage) of oocytes initially selected for their compact cumulus cells completed IVM and IVF when compared to unselected oocytes (P < .05). Proportions (percentage) of selected oocytes that matured and cleaved after in vitro insemination according to serum type used for IVM were: FCS: 110/175 (62.9%) and 37/110 (33.6%) and DO: 130/145 (89.7%) and 52/130 (40.0%); D1 127/130 (97.7%) and 41/127 (32.3%); D10 95/98 (96.9%) and 35/95 (36.8%); D20:113/116 (97.4%) and 49/113 (43.4%). A higher proportion (P < .05) of embryos resulting from the D20 group reached four- and eight-cell stages. In FCS-supplemented maturation media with no hormones added during maturation (control), results of IVM and IVF were 157/265 (59.2%) and 39/157 (24.8%), respectively. With E₂ (1 μg/ml) and FSH (5 μg/ml), comparable results were 189/215 (87.9%) and 71/189 (37.6%); with E₂ (1 μg/ml) plus LH (10 μml), 280/327 (85.6%) and 111/280 (39.6%). Added hormones improved IVM results (P < .05) and, when FSH or LH was added with E₂, in vitro development to four- and eight-cell stages was markedly enhanced (P < .05). Selection of oocytes, D20 serum, and added E₂ and FSH or LH for IVM improved in vitro development of bovine embryos after IVF.