"No suture" microanastomosis using Vicryl rings and fibrin adhesive system: an unsuccessful attempt

Vascular repairs using a combination of Vicryl rings to evert vessel edges and the Tisseel two-component fibrin adhesive system failed to achieve patent microanastomosis without using stay sutures. The bonding force of Tisseel alone was not sufficient to hold the cut ends of rat femoral arteries and veins together. All 10 arterial and 8 venous end-to-end anastomoses separated under normal intraluminal pressure immediately after the removal of microclamps. This method was found to be an unacceptable alternative to the conventional suturing method.     

番茄抗青枯病种苗选育初步研究

通过大量收集野生茄科植物作为栽培番茄的嫁接砧木 ,进行嫁接试验并观察嫁接成活率。栽植各砧木苗、番茄实生苗及嫁接成活率较高的嫁接苗 ,观察比较它们在自然条件下青枯病的发病率 (如果自然条件下青枯病发病率低的地块 ,可考虑人工接种病原 )、植株生长情况、产量和品质等 ,筛选出 2种嫁接成活率高 ,抗青枯病能力强 ,并能保持或提高接穗果产量和品质的番茄嫁接砧木。为深入进行番茄抗青枯病种苗选育研究和生产实践奠定了基础。     

Simplified nomenclature for compound flaps

The unique niche for compound flaps is their potential role for the repair of massive defects that demands the simultaneous restoration of multiple, missing tissue types. These complex flaps can be sorted into two major classes, and their subtypes on the basis of their means of vascularization are described. (1) Solitary vascularization, the composite flap: "multiple tissue components with a single vascular supply and dependent parts." (2) Combined flaps: (a) Siamese flaps: "multiple flap territories, dependent due to some common physical junction, yet each retaining their independent vascular supply"; (b) conjoint flaps: "multiple independent flaps, each with an independent vascular supply, but linked by a common indigenous source vessel"; and (c) sequential flaps: "multiple independent flaps, each with an independent vascular supply, and artificially linked by a microanastomosis." Many technical modifications that have improved or will improve the reliability of these flaps should not be confused as distinct flap types, but rather acknowledged as variations that can be more conveniently classified for the purposes of improved communication and research by using this basic schema as a guideline.     

Fluorescence and thermotropic studies of the interactions of PEI-cholesterol based PEI-chol lipopolymers with dipalmitoyl phosphatidylcholine membranes

Numerous PEI derived polymers have been explored for their use in gene delivery. Nine PEI-chol lipopolymers based on cholesterol grafting on three polyethyleneimines (PEI) of different molecular weights have been synthesized. Firstly their aggregation behavior has been studied using transmission electron microscopy and then their interactions with l-α-dipalmitoyl phosphatidylcholine (DPPC) membranes have been examined using fluorescence anisotropy and differential scanning calorimetry (DSC). These PEI-chol lipopolymers are found to quench the chain motion of the acyl chains of DPPC, when incorporated in membranes, depending upon the cholesterol grafting on PEI. These PEI-chol lipopolymers act as filler molecules in membranes. Electron microscopy shows the different aggregation behavior of these new PEI-chol lipopolymers depending upon the molecular weight of PEI and percentage of cholesterol grafting. Detailed analysis of the fluorescence anisotropy and DSC data indicate that the nature of perturbation induced by PEI-chol lipopolymers is dependent upon the molecular weight of the PEI used and the % of cholesterol grafting on PEI. In general, PEI-chol lipopolymers rigidify the liquid-crystalline phase of the membranes without any noticeable effect on the gel phase unlike natural cholesterol, which is known to fluidize the gel phase of the membranes.     

Studies on preparing and adsorption property of grafting terpolymer microbeads of PEI-GMA/AM/MBA for bilirubin

Crosslinking copolymer microbeads with a diameter range of 100-150 microm were synthesized by suspension copolymerization of glycidyl methacrylate (GMA), acrylamide (AM) and N,N'-methylene bisacrylamide (MBA). Subsequently, polyethyleneimine (PEI) was grafted on the surfaces of the terpolymer microbeads GMA/AM/MBA via the ring-opening reaction of the epoxy groups, and the grafting microbeads PEI-GMA/AM/MBA were prepared. In this paper, the adsorption property of the grafting microbeads for bilirubin was mainly investigated, and the effects of various factors, such as pH value, ionic strength and grafting degree of PEI on the surface of grafting microbeads and the adsorption capacity of the grafting microbeads for bilirubin were examined. The batch adsorption experiment results show that by right of the action of grafted polyamine macromolecules PEI, the grafting microbeads PEI-GMA/AM/MBA have quite strong adsorption ability for bilirubin; the isotherm adsorption conforms to Freundlich equation. The pH value of the medium affects the adsorption capacity greatly, As in the nearly neutral solutions with pH 6, the grafting microbeads have the strongest adsorption ability for bilirubin, whereas in acidic and basic solutions their adsorption ability is weak. The ionic strength hardly affects the adsorption ability of the grafting microbeads. The grafting degree of PEI on the surfaces of the grafting microbeads also has a great effect on the adsorption capacity, and higher the grafting degree of PEI on the surface of the microbead PEI-GMA/AM/MBA, the stronger is the adsorption ability of the microbeads.     

Comparison of different techniques for inoculation of "Candidatus Phytoplasma mali" on apple and periwinkle in biological indexing procedure

As phytoplasmas are non cultivable micro-organisms, the research on phytoplasmal diseases can only be achieved with infected hosts. Biological indexing (by grafting) is the simplest detection method for phytoplasmal diseases. We tested four different grafting techniques for inoculation of apple trees or periwinkles in greenhouse, including whip graft, bark graft, budding and chip-budding. All techniques were tested on apple trees (six trees per phytoplasma isolates) in insect-proof greenhouse. The whip and bark grafting were not feasible for periwinkle plants, because of fineness and fragility of their tissues: only the chip-budding was performed (four plants per isolate). In apple trees, the best and soonest positive results were obtained by chip and bark grafting. Except for seven transplants not-grown after grafting, 100% efficiency of inoculation was obtained by both methods. Nevertheless, the transmission of phytoplasma from transplant not-grown to rootstock was sometimes recorded (28.6%). The earliest phytoplasma symptoms after whip or bark grafting appeared after 3 months. Symptoms were obtained much later with budding and chip-budding. In case of periwinkles, infected apple and periwinkle materials were used as inoculum sources. Transmission of phytoplasma from periwinkle to periwinkle was successfully carried out by chip-budding grafting. The symptoms were observed during the second month after inoculation. The transmission of phytoplasma from infected apple material to periwinkle (by chip-budding) was achieved for 60 % of the tested samples. Moreover, the latency period before symptom observation was longer. Finally, we perceived the apple trees are more convenient and rapid than periwinkle plants for biological indexing of apple materials.     

Surface- and bulk-modified galactoglucomannan hemicellulose films and film laminates for versatile oxygen barriers

The objective of this study was to create oxygen barrier films based on the hemicellulose O-acetylgalactoglucomannan (AcGGM) that show high resistance toward moisture-rich conditions. We have applied Williamson benzylation, a classic derivatization method of carbohydrates, as well as two different methods for surface grafting, and, finally, lamination of unmodified hemicellulose films with the synthesized hydrophobic benzylgalactoglucomannan (BnGGM). It was found that the thermoplastically behaving BnGGM could form independent transparent and strong films that were easy to handle. As expected, their resistance toward water was very high, and the oxygen barrier properties showed drastically lower sensitivity toward moisture than films from the corresponding unmodified material. The surface grafting and lamination methods were approached in order to try and combine excellent barrier properties with moisture tolerance. It was found that the grafting methods applied had a positive effect in this direction; however, lamination turned out to be an even more promising option.     

Polyampholyte Nanoparticles Prepared by Self-Complexation of Cationized Poly(γ-glutamic acid) for Protein Carriers

A novel amphoteric poly(amino acid) is synthesized by grafting a cationic amino acid (L-Arg) to γ-PGA to prepare charged NPs. γ-PGA-Arg NPs can be prepared by the self-complexation of a single polymer by intra-/inter-molecular electrostatic interactions when the polymer is dispersed in water. The size and surface charge of the NPs can be regulated by the grafting degree of Arg (41, 56, and 83%). The smallest NPs are obtained at 56% grafting degree of the γ-PGA-Arg copolymer. The 56 and 83% grafting degree NPs are stable for at least 1 week. Depending on their surface charge, these NPs can selectively adsorb anionically or cationically charged proteins.     

Transglutaminase mediated grafting of silk proteins onto wool fabrics leading to improved physical and mechanical properties

Transglutaminases have the ability to incorporate primary amines and to graft peptides (containing glutamine or lysine residues) into proteins. These properties enable transglutaminases to be used in the grafting of a range of compounds including peptides and/or proteins onto wool fibres, altering their functionality. In this paper we investigated the transglutaminase mediated grafting of silk proteins into wool and its effect on wool properties. A commercial hydrolysed silk preparation was compared with silk sericin. The silk sericin protein was labelled with a fluorescent probe which was used to demonstrate the efficiency of the TGase grafting of such proteins into wool fibres. The TGase mediated grafting of these proteins led to a significant effect on the properties of wool yarn and fabric, resulting in increased bursting strength, as well as reduced levels of felting shrinkage and improved fabric softness. Also observed was an accumulation of deposits on the surface of the treated wool fibres when monitored by SEM and alterations in the thermal behaviour of the modified fibres, in particular for mTGase/sericin treated fibres which, with the confocal studies, corroborate the physical changes observed on the treated wool fabric.     

Improved infiltration of stem cells on electrospun nanofibers

Nanofibrous scaffolds have been recently used in the field of tissue engineering because of their nano-size structure which promotes cell attachment, function, proliferation and infiltration. In this study, nanofibrous polyethersulfone (PES) scaffolds was prepared via electrospinning. The scaffolds were surface modified by plasma treatment and collagen grafting. The surface changes then investigated by contact angle measurements and FTIR-ATR. The results proved grafting of the collagen on nanofibers surface and increased hydrophilicity after plasma treatment and collagen grafting. The cell interaction study was done using stem cells because of their ability to differentiate to different kinds of cell lines. The cells had normal morphology on nanofibers and showed very high infiltration through collagen grafted PES nanofibers. This infiltration capability is very useful and needed to make 3D scaffolds in tissue engineering.     

Segment- and nest-specific determination in the histoblasts of the housefly

Summary Using a novel grafting procedure for histoblasts, we have transplanted the fifth dorsal or ventral histoblast nests to heterotopic positions in the abdomen of the prepupa of the housefly to find out how rigid are these imaginai cells in their commitment to form their respective segmental pattern. Our results clearly show that these histoblasts survive in their new positions and form patterns according to their original determined state.     

Modification of high-lignin softwood kraft pulp with laccase and amino acids

This study demonstrates the potential of laccase-facilitated grafting of amino acids to high-lignin content pulps to improve their physical properties in paper products. Research studies have recently reported that increases in anionic fiber charge can improve strength properties of paper. In an effort to increase carboxylic acid groups, we developed a unique two-stage laccase grafting protocol in which fibers were initially treated with laccase followed by grafting reactions with amino acids. The bulk acid group content was measured, and a variety of amino acids including glycine (Gly), phenylalanine (Phe), serine (Ser), arginine (Arg), histidine (His), alanine (Ala), and aspartic acid (Asp) were examined. The effects of optimizing laccase dose, and amino acid structures, on fiber modification chemistry were studied. Histidine provided the best yield of acid groups on pulp fiber, and was used for the preparation of handsheets for physical strength testing. Laccase-histidine treated pulp showed an increase in strength properties of the resulting paper.     

Dual Labeling of Neural Crest Cells and Blood Vessels Within Chicken Embryos Using ChickGFP Neural Tube Grafting and Carbocyanine Dye DiI Injection

All developing organs need to be connected to both the nervous system (for sensory and motor control) as well as the vascular system (for gas exchange, fluid and nutrient supply). Consequently both the nervous and vascular systems develop alongside each other and share striking similarities in their branching architecture. Here we report embryonic manipulations that allow us to study the simultaneous development of neural crest-derived nervous tissue (in this case the enteric nervous system), and the vascular system. This is achieved by generating chicken chimeras via transplantation of discrete segments of the neural tube, and associated neural crest, combined with vascular DiI injection in the same embryo. Our method uses transgenic chick^GFP embryos for intraspecies grafting, making the transplant technique more powerful than the classical quail-chick interspecies grafting protocol used with great effect since the 1970s. Chick^GFP-chick intraspecies grafting facilitates imaging of transplanted cells and their projections in intact tissues, and eliminates any potential bias in cell development linked to species differences. This method takes full advantage of the ease of access of the avian embryo (compared with other vertebrate embryos) to study the co-development of the enteric nervous system and the vascular system.     

Graft copolymers of starch and its application in textiles

The graft copolymerization of styrene (ST), methyl methacrylate (MMA)/butyl acrylate (BA) with starch was carried chemically using ferrous ion-peroxide redox system. The grafting was performed at 60 °C and the monomer ratios of ST/MMA and ST/BA was varied with their % composition as 80/20, 50/50 and 20/80 parts by weight. The effect of initiator concentration, starch concentration and the monomer ratio on the grafting efficiency was studied. The grafted starch granules (GSG) were further analyzed for their particle size, bulk density and by sizing on cotton yarn for its physico-mechanical properties such as tensile strength, elongation at break, etc. The rheological properties of the resulting granular product in water as well as the starch graft copolymer emulsion were studied.     

Posterior interosseous free flap with extended pedicle for hand reconstruction

The anatomy of the posterior interosseous vessels makes them suitable as a donor area of free flap. The skin island can be designed on the perforating vessels of the distal third of the forearm, up to the dorsal wrist crease, to increase the pedicle length (7 to 9 cm). A series of nine flaps transferred to reconstruct hand defects is presented. All flaps were designed over the dorsal distal forearm, and dimensions permitted direct closure of the donor site (up to 4 to 5 cm wide). Apart from a linear scar, donor morbidity was negligible. All transfers were successful. Although its dissection is somewhat tedious, the anatomy of the vascular pedicle is suitable for microanastomosis and the skin island is thin, although hairy. The posterior interosseous free flap with extended pedicle may be a good choice when limited amounts of thin skin and a long vascular pedicle are needed.     

Neurite outgrowth from progeny of epidermal growth factor-responsive hippocampal stem cells is significantly less robust than from fetal hippocampal cells following grafting onto organotypic hippocampal slice cultures: effect of brain-derived neurotrophic factor

Epidermal growth factor (EGF)-responsive stem cells from both developing and adult central nervous system (CNS) can be expanded and induced to differentiate into neurons and glia in vitro. Because of their self-renewal and multipotent properties, these cells can potentially provide an unlimited tissue source for neural grafting in neurodegenerative disorders. However, the capability of neurons derived from these stem cells to project axons to distant targets following grafting, thereby enabling the restoration of damaged CNS circuitry, remains unknown. We hypothesize that grafted EGF-responsive stem cells and their progeny are not competent to project axons into distant target sites unless exposed to specific neurotrophic factors. We compared neurite outgrowth between gestation day 14 primary mouse hippocampal cells and EGF-generated secondary neurospheres of postnatal mouse hippocampal stem cells, following grafting onto the CA3 region of organotypic hippocampal slice cultures prepared from postnatal rats. Neurite outgrowth from grafted cells was visualized using immunohistochemical staining for the mouse specific antigen M6. Fetal hippocampal cells showed extensive and specific neurite outgrowth into many regions of the slice, including the CA1 region and distant subiculum, by 7 days after grafting. In contrast, neurite outgrowth from neurosphere cells was nonspecific and restricted to the immediate surrounding region after either 7 or even 15 days following grafting. Application of brain-derived neurotrophic factor (BDNF) (5 ng in 0.5 microL) to slices on day 1 after grafting significantly enhanced neurite outgrowth from neurosphere cells, but overall neurite outgrowth from neurosphere cells remained decreased compared to that from fetal hippocampal cells. These results underscore that EGF-responsive stem cell-derived neurons possess limited intrinsic capability for long-distance neurite outgrowth compared to fetal neurons. However, neurite outgrowth from EGF-responsive stem cell-derived neurons can be enhanced by treating with specific neurotrophic factors such as BDNF.     

Engineering and cell attachment properties of human fibronectin–fibrinogen scaffolds for use in tissue engineered blood vessels

Tissue engineered constructs reported to date have been prepared primarily from poly(glycolic) acid or collagen scaffolds onto which cells are grown and matured. In this paper we report experimental data to demonstrate the use of a natural, human protein, as a tubular scaffold for vascular grafting. Using a manual and a scalable dip-coating technique we prepared fibronectin-based tubes up to 12 cm in length and up to 3 mm in diameter. The tubes were flexible and their mechanical properties, measured in terms of tensile strength and burst pressure as a function of humidity, demonstrated their suitability as scaffolds for use in vascular grafting, e.g. coronary artery by pass grafting. In vitro tests involved the attachment of endothelial cells pumped under laminar flow conditions through the tube lumen and the adherence of smooth muscle cells on the outer surface of the tubes. These tests, carried out in multiwells, showed that the scaffolds had excellent cell attachment and guidance characteristics.     

Immobilisation of oligo-peptidic probes for microarray implementation: characterisation by FTIR, atomic force microscopy and 2D fluorescence

Proteomic microarrays show a wide range of applications for the investigation of DNA-protein, enzyme-substrate as well as protein-protein interactions. Among many challenges to build a viable "protein microarray", the surface chemistry that will allow to immobilised various proteins to retain their biological activity is of paramount importance. Here we report a chemical functionalisation method allowing immobilisation of oligo-peptides onto silica surface (porous silica, glass, thermal silicon dioxide). Substrates were first derivatised with a monofunctional silane allowing the elaboration of dense and uniform monolayers in highly reproducible way. Prior to the oligo-peptides grafting, this organic layer was functionalised with an amino-polyethyleneglycol. The coupling step of oligo-peptides onto functionalised supports is achieved through activation of the C-terminal function of the oligo-peptides. Chemical surface modifications were followed by FTIR spectroscopy, AFM measurements and fluorescence scanning microscopy. A systematic study of the oligo-peptide grafting conditions (time, concentration, solvent) was carried out to optimise this step. The oligo-peptides grafting strategy implemented in this work ensure a covalent and oriented grafting of the oligo-peptides. This orientation is ensured through the use of fully protected peptide except the terminal primary amine. The immobilized peptides will be then deprotected before biological recognition. This strategy is crucial to retain the biological activity of thousands of oligo-probes assessed on a microarray.     

Improving immunosensor performances using an acoustic mixer on droplet microarray

A major drawback of protein microarrays is the lack of control of ligand immobilization at the surface of the chip which limits their performances and thus their impacts in in vitro diagnosis. To improve antibody (Ab) grafting during the spotting process on commercialized gold SPRi chips, we propose to produce a chaotic flow in every spotted droplet, by using an acoustic field, in order to disrupt the steady state of the reaction of Ab grafting. Our results show that acoustic mixing during Ab binding at the biochips surface increases their biorecognition performances of a mean factor of 2.7 in comparison with Ab layer grafted in a passive mode. Moreover, it increases statistically the homogeneity of the response over all the surface of the chips.