Implant-supported palatal lift prosthesis in a patient with velopharyngeal incompetence: a case report

doi: 10.1111/j.1741‐2358.2011.00561.x Implant‐supported palatal lift prosthesis in a patient with velopharyngeal incompetence: a case report Objective: To describe the use of dental implants in the treatment of velopharyngeal incompetence. Background: Velopharyngeal incompetence is characterized by the inability to contract the tissues of the soft palate. The most common causes are neuromuscular problems resulting from concussion and degenerative conditions of the central nervous system. Materials and methods: The treatment using palatal lift prosthesis is well established in the literature; however, reports on the use of osseointegrated implants are scarce. Rehabilitation using only this type of fibromucosal support is difficult in edentulous patients, since the prosthesis has a palatal lift extension. Results: The implants provided retention and stability to the prosthesis, improving swallowing and speech and contributing to improve the patient’s quality of life. Conclusion: This article reports the rehabilitation of a patient with a totally edentulous maxilla with velopharyngeal incompetence using an implant‐retained palatal lift prosthesis.     

Placement of endosteal implants in the zygoma after maxillectomy: a Cadaver study using surgical navigation

Endosteal implants facilitate obturator prosthesis fixation in tumor patients after maxillectomy. Previous clinical studies have shown, however, that the survival of implants placed into available bone after maxillectomy is generally poor. Nevertheless, implants positioned optimally in residual zygomatic bone provide superior stability from a biomechanical point of view. In a pilot study, the authors assessed the precision of VISIT, a computer-aided surgical navigation system dedicated to the placement of endosteal implants in the maxillofacial area. Five cadaver specimens underwent hemimaxillectomy. The cadaver head was matched to a preoperative high-resolution computed tomograph by using implanted surgical microscrews as fiducial markers. The position of a surgical drill relative to the cadaver head was determined with an optical tracking system. Implants were placed into the zygomatic arch, where maximum bone volume was available. The results were assessed using tests for localization accuracy and postoperative computed tomographic scans of the cadaver specimens. The localization accuracy of landmarks on the bony skull was 0.6 +/- 0.3 mm (average +/- SD), as determined with a 5-df pointer probe; the localization accuracy of the tip of the implant burr was 1.7 +/- 0.4 mm. The accuracy of the implant position compared with the planned position was 1.3 +/- 0.8 mm for the external perforation of the zygoma and 1.7 +/-1.3 mm for the internal perforation. Eight of 10 implants were inserted with maximal contact to surrounding bone, and two implants were located unfavorably. Reliable placement of implants in this region is difficult to achieve. The technique described in this article may be very helpful in the management of patients after maxillary resection with poor support for obturator prostheses.     

Maxillary sinus lift using fresh frozen bone chips in presence of sinus cyst: clinical and histological report

The reconstruction of edentulous patients with adequate bone volume and density by the use of bone graft and, subsequently, the placement of dental implants has become a viable treatment option with high predictability. According to many authors, maxillary antral cysts are one of the most common benign pathologies of the maxillary sinus, and they also represent an important contraindication to sinus regenerative surgical technique. The authors report a case of maxillary atrophy which is augmented by fresh frozen bone chips in the presence of antral cysts.     

下颌种植覆盖义齿的生物力学研究进展

口腔生物力学是用生物力学的概念和方法,研究口腔医学中的有关基础性科学问题、解决口腔医学中的临床实际问题、发展口腔临床技术的一门学科。在口腔正畸学、修复学、种植学及口腔颌面外科学等领域存在着大量的生物力学问题,生物力学已成为口腔医学的基础科学之一。传统全口义齿修复常常会出现固位稳定差、咀嚼效率低、患者有疼痛感、适应时间长等情况,很大程度上不能满足患者的修复要求。种植覆盖义齿对于下颌牙槽嵴严重吸收的患者,效果尤为明显。种植覆盖义齿是义齿与种植体之间以不同的附着体作为连接,形成患者可以自行摘戴的种植体支持的覆盖义齿修复。下颌种植覆盖义齿因其能有效地提高下半口义齿的固位性和稳定性、显著提高了患者的咀嚼效率,目前已成为修复下颌牙槽骨严重吸收的无牙颌患者的有效修复方法。本文针对下颌种植覆盖义齿的生物力学研究进展作一综述。     

Experimental and computational approach for the evaluation of the biomechanical effects of dental bridge misfit

Dental bridges supported by osseointegrated implants are commonly used to treat the partially or completely edentulous jaw. The bridges are manufactured in metal alloy using a sequence of technological steps which well match the requirement to get custom overstructures but does not guarantee geometrical and dimensional tolerances. Dentists often experience that a perfect fit of the bridge with the abutments is almost impossible to achieve.When a misfitting bridge is forced on the abutments, deformations may occur inducing a permanent preload at the fixture-bone interface and the greater the misfit the greater is the preload and the risk of implant failure. This work gives an evaluation of the biomechanical effects induced by a misfitting bridge when forced on two supporting dental implants. The strains induced in the bridge have been measured using two purposely designed and fabricated experimental devices allowing different types of misfit. FEM 3D models of the bridge and of the bridge anchored to the bone by implants have been developed. The former has been validated by simulating the same loading conditions as in the experimental tests and comparing the bridge strains. Both models have been used for the evaluation of the stress induced in the bridge and at the fixture-bone interface by bridge length errors. The results show that the method may help to estimate the stress distribution in the bridge and bone as a consequence of different dental bridge misfits.     

Mechanical response comparison in an implant overdenture retained by ball attachments on conventional regular and mini dental implants: a finite element analysis

This study investigates the bone/implant mechanical responses in an implant overdenture retained by ball attachments on two conventional regular dental implants (RDI) and four mini dental implants (MDI) using finite element (FE) analysis. Two FE models of overdentures retained by RDIs and MDIs for a mandibular edentulous patient with validation within 6% variation errors were constructed by integrating CT images and CAD system. Bone grafting resulted in 2 mm thickness at the buccal side constructed for the RDIs-supported model to mimic the bone augmentation condition for the atrophic alveolar ridge. Nonlinear hyperelastic material and frictional contact element were used to simulate characteristic of the ball attachment-retained overdentures. The results showed that a denture supported by MDIs presented higher surrounding bone strains than those supported by RDIs under different load conditions. Maximum bone micro strains were up to 6437/2987 and 13323/5856 for MDIs/RDIs under single centric and lateral contacts, respectively. Corresponding values were 4429/2579 and 9557/5774 under multi- centric and lateral contacts, respectively. Bone micro strains increased 2.06 and 1.96-folds under single contact, 2.16 and 2.24-folds under multiple contacts for MDIs and RDIs when lateral to axial loads were compared. The maximum RDIs and MDIs implant stresses in all simulated cases were found by far lower than their yield strength. Overdentures retained using ball attachments on MDIs in poor edentulous bone structure increase the surrounding bone strain over the critical value, thereby damaging the bone when compared to the RDIs. Eliminating the occlusal single contact and oblique load of an implant-retained overdenture reduces the risk for failure.     

Oral health and oral implant status in edentulous patients with implant‐supported dental prostheses who are receiving long‐term nursing care

Aim: The aim of this study was to investigate oral health and oral implant status in a group of edentulous patients receiving long‐term residential or nursing care (LTC), all of whom had implant‐supported fixed or removable dental prostheses. Material and methods: A dental examination was performed on a total of 3310 patients receiving LTC and from this population 35 edentulous patients in whom dental implants had been placed formed the cohort for this study. All examinations were performed by a specialist in hospital dentistry and took place in the patients’ own home environment. Oral health was assessed by means of a protocol which evaluated oral hygiene status, possible oral mucosal inflammation and oral mucosal friction levels. Any problems with the implant‐supported prosthesis, implant mobility or other complications were also assessed. In addition, patients were asked about any oral symptoms and their usual oral hygiene procedures. Results: About half of the subjects (17/35) were registered as having no/mild inflammation with 18 of 35 having moderate/severe inflammation. Twelve of the 35 patients had good/acceptable oral hygiene and 23 of 35 had poor/bad oral hygiene. Twenty‐one of the 35 patients depended on help from the nursing personnel for their daily oral hygiene procedures. Obvious problems with food impaction were noted in 11 patients. A total of 229 implants had been placed in 43 jaws supporting 40 full arch‐fixed prostheses and three implant‐borne overdentures. There was no evidence of mobility or fractures of either the implants or the prostheses. Fifteen implants showed some exposed screw threads. Pus was exuding from one implant site and general peri‐implant gingival hyperplasia was noted in two patients. Twenty‐four patients were completely satisfied with the function and appearance of their implant‐supported prostheses. Two patients were totally dissatisfied. Conclusion: This study indicates that oral implant therapy can be considered as a treatment of choice in elderly patients, even if oral hygiene is sub‐optimal.     

Accelerated rehabilitation of an edentulous patient with an implant retained dental prosthesis: a case report

This case report details the successful rehabilitation of an edentulous patient using a complete upper prosthesis and a lower implant retained overdenture. The provision of care was split between a specialist centre and a primary care setting. This approach reduced inconvenience to the patient. Modern surgical and prosthodontic techniques also reduced the total delivery time. After initial consultation a new set of complete dentures was prescribed with changes in design to the originals. The patient was also planned for placement of two mandibular implants to stabilise and retain the mandibular denture. The first line of treatment involved provision of a new set of dentures constructed by the patient's general dental practitioner. Dental implants were then placed in a specialist centre and the patient returned to the dental practice for attachment of the lower denture to the dental implants. The benefits and success of mandibular implant retained dentures are well documented. With delivery of the overdenture, the patient reported increased satisfaction with his prostheses which allowed him to eat a greater range of foods and enabled him to feel confident when speaking and socialising.     

Finite element investigation of implant-supported fixed partial prosthesis in the premaxilla in immediately loaded and osseointegrated states

The aim of this study was to gain insight into the behaviour of the stresses and strains at the bone–implant interface of an implant-supported fixed partial prosthesis (FPP) in the premaxilla under immediate loading and osseointegrated conditions. Finite element models of a four-unit FPP were generated. An extreme condition was simulated, using only two immediately loaded implants in order to derive recommendations for possible clinical application. Straight and 20°-angled abutments and bonded or sliding contact between the bridge and abutment were simulated. In addition, two models were generated with two completely osseointegrated implants. A 150 N load to the prosthesis at a 45° angle to the long axis of each implant was applied. Minor differences were observed in implant displacements, stress and strain distributions of the two abutment designs. However, bone loading exceeded the physiological limits, including a risk of bone atrophy. A considerable decrease in implant displacements and bone loading was observed in the osseointegrated cases. An FPP supported by only two implants cannot be recommended for immediate loading.     

Biomechanical evaluation of the natural abutment teeth in combined tooth-implant-supported telescopic prostheses: a three-dimensional finite element analysis

Telescopic overdentures supported by the combination of natural teeth and implants have been thought a valuable treatment for the severely compromised partially edentulous patients. But the combination of teeth and implants involves highly complex biomechanical problems. This study is to evaluate biomechanical behaviors of the natural abutment teeth with the treatment of combined tooth-implant supported telescopic crown prostheses in mandible through 3D FEA. According to this study, the prosthetic option supported by a combination of teeth and implants and retained by double crowns could protect teeth and their periodontal support tissues acting as a rigid splint, and may be a valuable treatment option for partially edentulous patients with severely reduced remaining teeth in mandible.     

Comparison of mandibular bone mineral density in osteoporotic, osteopenic and normal elderly edentulous subjects measured by the dual-energy X-ray absorptiometry technique

doi: 10.1111/j.1741‐2358.2012.00625.x Comparison of mandibular bone mineral density in osteoporotic, osteopenic and normal elderly edentulous subjects measured by the dual‐energy X‐ray absorptiometry technique Objective: The aim of this study was to compare the mandibular body bone mineral density according to bone mineral density status of spine and femur measured by dual‐energy X‐ray absorptiometry (DXA) technique in elderly edentulous individuals. Background: One of the factors that affect the survival rate of implants is bone mineral density (BMD) of the jaws. Materials and methods: Fifty edentulous elderly patients’ (27 women and 23 men) spine, femur and the mandibular body BMDs were measured using DXA technique. BMD scans of the AP lumbar spine (L2–L3) and femur were classified using World Health Organisation criteria for bone mass. Results: There was a statistically significant difference between the normal femur group’s–osteoporosis group’s mandibular body BMD (p = 0.001) and femoral osteopaenia group’s–osteoporosis group’s mandibular body BMD (p < 0.001). The femoral osteoporosis group’s mandibular body BMDs were lower than those of both the normal femoral and the femoral osteopaenia group subjects’. Conclusion: Classification of edentulous mandibles according to low and high bone mineral densities is a problem in implant dentistry. The results of this study demonstrated that femoral bone mineral density status may be used to provide preliminary information about the bone mineral density of the mandibular body region in elderly edentulous subjects.     

Impact of Human Genome Project on treatment of frail and edentulous patients

Objective: Because of ongoing increases in life expectancy and deferment of edentulousness to older age, dentists are facing a different challenge to satisfy elderly denture wearers with a higher prevalence of chronic diseases. This discussion introduces the Human Genome databases as novel and powerful resources to re‐examine the core problems experienced by frail and edentulous patients. Background: Recent studies demonstrated that mandibular implant overdentures do not necessarily increase masticatory function, perception and satisfaction in denture wearers with adequate edentulous residual ridges. It has been demonstrated that the rate of edentulous residual ridge resorption significantly varies among individuals. The prognosis and cost‐effectiveness of denture treatment, with or without implants, may largely depend on how the edentulous ridge is maintained. However, reliable clinical methods permitting dentists to predict the long‐term health of the edentulous residual ridge are lacking. Materials and methods: With the completion of the Human Genome Project, the genomic sequence database from this multinational consortium will provide a unique resource to determine the genetic basis of similarity and diversity of humans. Results: One base pair in every 100 to 300 base pairs of the genome sequence varies among humans, suggesting that genetic diagnosis using the single nucleotide polymorphisms (SNPs) may provide a novel opportunity to differentiate our edentulous patients. Conclusions: Future dental service for the elderly will require a personalized care paradigm, using highly sensitive diagnostic technology such as SNP genomic analysis, for recommending the treatment with greatest potential benefit.     

Elders with implant overdentures: a 22-year clinical report

doi: 10.1111/j.1741‐2358.2012.00628.x Elders with implant overdentures: a 22‐year clinical report Objective: To report on the long‐term survival and prosthodontic maintenance of two edentulous adults with mandibular overdentures supported by hydroxyapatite (HA)‐coated implants. Background: Mandibular implant overdentures are a successful treatment option with positive impact on the quality of life of elderly edentulous adults. Long‐term survival of the implants requires continued rigorous prosthodontic maintenance. Clinical report: Two elderly edentulous adults with mandibular overdentures supported by 2 HA‐coated implants were presented for prosthodontic rehabilitation after 22 years of placement. The implants were osseo‐integrated and surviving at presentation based on accepted criteria. The mandibular implant overdentures suffered recurrent loss of retention and stability. Prosthodontic treatment involving the replacement of defective attachment systems and construction of new sets of mandibular implant overdentures opposing complete maxillary dentures is presented. Conclusion: The long‐term survival of mandibular 2‐implant overdentures requires continued prosthodontic maintenance. A conservative approach in the rehabilitation of two older edentulous adults with mandibular 2‐implant overdentures was described including proper selection of attachment systems.     

New Design for Rapid Prototyping of Digital Master Casts for Multiple Dental Implant Restorations

Aim

This study proposes the replacement of all the physical devices used in the manufacturing of conventional prostheses through the use of digital tools, such as 3D scanners, CAD design software, 3D implants files, rapid prototyping machines or reverse engineering software, in order to develop laboratory work models from which to finish coatings for dental prostheses. Different types of dental prosthetic structures are used, which were adjusted by a non-rotatory threaded fixing system.

Method

From a digital process, the relative positions of dental implants, soft tissue and adjacent teeth of edentulous or partially edentulous patients has been captured, and a maser working model which accurately replicates data relating to the patients oral cavity has been through treatment of three-dimensional digital data.

Results

Compared with the conventional master cast, the results show a significant cost savings in attachments, as well as an increase in the quality of reproduction and accuracy of the master cast, with the consequent reduction in the number of patient consultation visits. The combination of software and hardware three-dimensional tools allows the optimization of the planning of dental implant-supported rehabilitations protocol, improving the predictability of clinical treatments and the production cost savings of master casts for restorations upon implants.     

Testing dental implants with an in vivo finite element model]

The finite element method (FEM) makes it possible to simulate biomechanical situations on a computer. In the present study the so-called voxel method [9, 14, 17, 18, 19] was used for the construction of the mandible model. For this, the relationship between the biological tissue (e.g. bone) and the corresponding attenuation coefficient of CT data (Hounsfield units = HU) were utilized. The CT data were obtained from an edentulous patient provided with a prosthesis borne on two titanium implants. In a parallel study, the bite forces of the same individual were measured. These were recorded digitally in three dimensions (cranio-caudal, anterior-posterior and left-right) The forces determined by a special program were then transferred to the FEM model implants. We were able to show that a bar joining the implants had a far greater effect on maximum equivalent stress than was expected from the measuring data alone. The highest stress at maximum occlusive force was lowered by 704% on using the connecting bar. On chewing, a stress reduction of 59.9% was observed. The reduction in stress achieved by the bar could, we believe, prolong the life of the implant.     

The influence of mandibular implant-retained overdentures in masticatory efficiency

doi: 10.1111/j.1741‐2358.2011.00539.x The influence of mandibular implant‐retained overdentures in masticatory efficiency Objective: To evaluate the masticatory efficiency of patients rehabilitated with conventional dentures (CDs) or implant‐retained mandibular overdentures. Background: Despite the evident benefits of implants on mastication as assessed by subjective patient‐based outcomes, the extent of implant overdenture treatment effect on food comminution is not well established. Materials and methods: A randomised clinical trial was carried out with 29 completely edentulous patients divided into two groups. The first group was rehabilitated with a mandibular overdenture retained by two splinted implants with bar‐clip system, while the second group was rehabilitated with a mandibular CD. Both groups also were rehabilitated with maxillary CDs. Masticatory efficiency and patient satisfaction were assessed 3 months after denture insertion. Masticatory efficiency was evaluated through the colorimetric method with the beads as the artificial test‐food. Comparisons for masticatory efficiency and patient satisfaction were performed using Student’s t‐test (α = 0.05). Results: No significant statistical difference was found for masticatory efficiency (p = 0.198). Patient overall satisfaction was significantly higher for the mandibular overdenture (p < 0.001). In addition, mandibular overdenture patients were significantly more satisfied with chewing experience (p < 0.05) and retention of the lower denture (p < 0.005). Conclusion: The results of this study suggest that mandibular overdenture significantly improves chewing experience, although limited effect on masticatory efficiency has been observed.     

Radiographic changes in alveolar bone height on overdenture abutments: a longitudinal study

Objective: Stabilisation of partial dentures is an important part of prosthodontic treatment, particularly in patients with an excessive reduction in alveolar bone supporting their abutment teeth. In these cases, overdenture prostheses are one possible treatment choice. Background: The aim of this study was to evaluate the effects of overdentures on the condition of alveolar bone of the remaining teeth, and to evaluate the overdenture concept in the prosthetic treatment of partially edentulous patients. Materials and methods: The investigation was conducted on 22 patients during observation periods of 6 and 10 years. After preparation, all abutment teeth were provided with either amalgam restorations or gold copings. An overdenture in the lower jaw was fabricated for every patient. A special film holder was used to repeat the X‐ray procedure in every patient in the same manner. The radiographs were evaluated using the grid scale. The alveolar bone level of all remaining teeth was evaluated on dental films by measuring the distance between the root apex and coronal border of the alveolar bone. Results: A statistically significant difference (p < 0.01) was calculated 6 years after delivery stage between distal alveolar bone levels of experimental abutments under overdentures and the remaining teeth of the control group. Alveolar bone of abutment teeth was considerably preserved, particularly in seven patients observed 10 years after provision of their dentures. Conclusion: Within the limitation of this study, the validity of the overdenture treatment in partially edentulous patients is concluded. Good oral hygiene was crucial for the success of treatment with overdentures.     

Should edentulous patients be constrained to removable complete dentures? The use of dental implants to improve the quality of life for edentulous patients

doi:10.1111/j.1741‐2358.2009.00294.x
Should edentulous patients be constrained to removable complete dentures? The use of dental implants to improve the quality of life for edentulous patients Background: Nowadays, there is some speculation among dental educators that the need for complete dentures will significantly decrease in the future and that training in their provision should be removed from the dental curriculum. Objective: To sensitise the reader to the functional shortcomings of complete denture therapy in the edentulous patient and present restorative options including implants to improve edentulous quality of life in these patients. Methods: Information retrieval followed a systematic approach using PubMed. English articles published from 1964 to 2008, in which the masticatory performance of patients with implant‐supported dentures was assessed by objective methods and compared with performance with conventional dentures, were included. Results: National epidemiological survey data suggested that the adult population in need of one or two complete dentures will increase from 35.4 million adults in 2000 to 37.9 million adults in 2020. Clinical studies have showed that the ratings of general satisfaction were significantly better in the patients treated with implant overdentures post‐delivery compared with the complete denture users. In addition, the implant group gave significantly higher ratings on comfort, stability and ability to chew. Furthermore, patients who received mandibular implant overdentures had significantly fewer oral health‐related quality of life problems than did the conventional group. Conclusion: Implant‐supported dentures including either complete overdentures or a hybrid prosthesis significantly improve the quality of life for edentulous patients compared with conventional removable complete dentures. Therefore, the contemporary dental practitioner should consider other options as well as conventional removable complete dentures to restore edentulous patients.     

Reduction malarplasty through an intraoral incision: a new method

Until recently, osteotomies and surgeries to reposition prominent zygoma have been performed by means of a coronal incision or intraoral and preauricular incisions. Such incisions have penalties such as scars, the possibility of facial nerve injury, and long operative times. After reflecting on their past experiences with facial bone surgery, the authors developed an alternative approach. In this method, the cheekbone protrusion is corrected by performing an osteotomy and repositioning through an intraoral incision only. During the past 3 years, the authors have operated on 23 patients with malar prominences. The amount of bone to be removed is determined by preoperative interviews, physical examinations, and x-rays. Intraoral incisions provide access to the zygomatic body and lateral orbital rim. After L-shaped osteotomies (two parallel vertical and one transverse osteotomy at the medial part of the zygomatic body), the midsegment is removed. The posterior portion of the zygomatic arch was approached through the medial aspect and was outfractured using a curved osteotome. After completing the triple osteotomy, the movable zygomatic complex was reduced medially and fixed with miniplates and screws on the zygomaticomaxillary buttress. The patients were followed for 9.5 months, with acceptable results and few complications. The authors conclude that this technique is an effective and safe method of reduction malarplasty.     

Influence of transmucosal height in abutments of single and multiple implant-supported prostheses: a non-linear three-dimensional finite element analysis

The aim of this study was to analyze the influence of three different transmucosal heights of the abutments in single and multiple implant-supported prostheses through the finite element method. External hexagon implants, MicroUnit, and EsthetiCone abutments were scanned and placed in an edentulous maxillary model obtained from a tomography database. The simulations were divided into two groups: (1) one implant with 3.75 × 10 mm placed in the upper central incisor, simulating a single implant-supported fixed prosthesis with an EsthetiCone abutment; and (2) two implants with 3.75 × 10 mm placed in the upper lateral incisors with MicroUnit abutments, simulating a multiple implant-supported prosthesis. Subsequently, each group was subdivided into three models according to the transmucosal height (1, 2, and 3 mm). A static oblique load at an angle of 45 degrees to the long axis of the implant in palatal-buccal direction of 150 and 75 N was applied for multiple and single implant-supported prosthesis, respectively. The implants and abutments were assessed according to the equivalent Von Mises stress analyses while the bone and ceramics were analyzed through maximum and minimum principal stresses. The total deformation values increased in all models, while the transmucosal height was augmented. The transmucosal height of the abutments influences the stress values at the bone, ceramics, implants, and abutments of both the single and multiple implant-supported prostheses, with the transmucosal height of 1 mm showing the lowest stress values.