Complete primary structure of the small outer capsid (soc) protein of bacteriophage T4

The head shell of bacteriophage T4 contains most likely only five different protein species: gp20, gp23¹, gp24¹, hoc and soc. Only gp23¹, the major head protein, hoc and soc are found in the tubular part of elongated capsids of giant bacteriophage T4. Giant T2 bacteriophages contain only gp23¹ in their tubular part. This difference between T2 and T4 bacteriophages correlates with some of their physico-chemical properties like instability/stability, respectively of the capsid to dissociation at higher pH or in the presence of detergents.In an attempt to understand this phenomenon at a molecular level, we present in this paper the complete primary structure of soc protein and discuss its relevance to future work.     

Thermodynamic characterization of viral procapsid expansion into a functional capsid shell

The assembly of "complex" DNA viruses such as the herpesviruses and many tailed bacteriophages includes a DNA packaging step where the viral genome is inserted into a preformed procapsid shell. Packaging triggers a remarkable capsid expansion transition that results in thinning of the shell and an increase in capsid volume to accept the full-length genome. This transition is considered irreversible; however, here we demonstrate that the phage λ procapsid can be expanded with urea in vitro and that the transition is fully reversible. This provides an unprecedented opportunity to evaluate the thermodynamic features of this fascinating and essential step in virus assembly. We show that urea-triggered expansion is highly cooperative and strongly temperature dependent. Thermodynamic analysis indicates that the free energy of expansion is influenced by magnesium concentration (3-13?kcal/mol in the presence of 0.2-10?mM Mg(2+)) and that significant hydrophobic surface area is exposed in the expanded shell. Conversely, Mg(2+) drives the expanded shell back to the procapsid conformation in a highly cooperative transition that is also temperature dependent and strongly influenced by urea. We demonstrate that the gpD decoration protein adds to the urea-expanded capsid, presumably at hydrophobic patches exposed at the 3-fold axes of the expanded capsid lattice. The decorated capsid is biologically active and sponsors packaging of the viral genome in vitro. The roles of divalent metal and hydrophobic interactions in controlling packaging-triggered expansion of the procapsid shell are discussed in relation to a general mechanism for DNA-triggered procapsid expansion in the complex double-stranded DNA viruses.     

Binding of the structural protein soc to the head shell of bacteriophage T4

Qβ plus strands with a 70 S ribosome bound to the coat cistron initiation site were used as template for Qβ replicase. Minus strand synthesis proceeded until the replicase reached the ribosome. The ribosome was removed and elongation was continued in a substrate-controlled, stepwise fashion. The nucleotide analog N⁴-hydroxyCMP was introduced into the positions complementary to the third and fourth nucleotides of the coat cistron. The minus strands were elongated to completion, purified and used as template for Qβ replicase. The final plus strand preparation consisted of four species, with the sequences -A-U-G-G- (wild type), -A-U-A-G- (mutant C₃), -A-U-G-A- (mutant C₄) and -A-U-A-A- (mutant $\text{C}{}_3\text{C}{}_4$) at the coat initiation site. The ribosome binding capacity of the mutant RNAs relative to wild type was <0.1 (C₃), 3.2 (C₄) and 0.3 ($\text{C}{}_3\text{C}{}_4$). The finding that mutant C₃ no longer formed an initiation complex suggests that the interaction of the ribosome binding site with fMet-tRNA plays an essential role in the formation of the 70 S initiation complex. The fact that mutant C₄ RNA bound more efficiently than wild type, and that mutant $\text{C}{}_3\text{C}{}_4$ RNA showed substantial ribosome binding capacity whereas the single mutant C₃ did not, can be explained by assuming that an A residue following the A-U-G triplet interacts with a complementary U residue in the anticodon loop sequence. In the case of $\text{C}{}_3\text{C}{}_4$ this additional base-pair may offset the reduced codon-anticodon interaction resulting from the modification of the A-U-G codon.     

Assembly-dependent conformational changes in a viral capsid protein. Calorimetric comparison of successive conformational states of the gp23 surface lattice of bacteriophage T4

Inter- and intra-subunit bonding within the surface lattice of the capsid of bacteriophage T4 has been investigated by differential scanning calorimetry of polyheads, in conjunction with electron microscopy, limited proteolysis and sodium dodecyl sulfate/polyacrylamide gel electrophoresis. The bonding changes corresponding to successive stages of assembly of the major capsid protein gp23, including its maturation cleavage, were similarly characterized. The uncleaved/unexpanded surface lattice exhibits two endothermic transitions. The minor event, at 46 degrees C, does not visibly affect the surface lattice morphology and probably represents denaturation of the N-terminal domain of gp23. The major endotherm, at 65 degrees C, represents denaturation of the gp23 polymers. Soluble gp23 from dissociated polyheads is extremely unstable and exhibits no endotherm. Cleavage of gp23 to gp23* and the ensuing expansion transformation effects a major stabilization of the surface lattice of polyheads, with single endotherms whose melting temperatures (t*m) range from 73 to 81 degrees C, depending upon the mutant used and the fraction of gp23 that is cleaved to gp23* prior to expansion. Binding of the accessory proteins soc and hoc further modulates the thermograms of cleaved/expanded polyheads, and their effects are additive. hoc binding confers a new minor endotherm at 68 degrees C corresponding to at least partial denaturation of hoc. Denatured hoc nevertheless remains associated with the surface lattice, although in an altered, protease-sensitive state which correlates with delocalization of hoc subunits visualized in filtered images. While hoc binding has little effect on the thermal stability of the gp23* matrix, soc binding further stabilizes the surface lattice (delta Hd approximately +50%; delta t*m = +5.5 degrees C). It is remarkable that in all states of the surface lattice, the inter- and intra-subunit bonding configurations of gp23 appear to be co-ordinated to be of similar thermal stability. Thermodynamically, the expansion transformation is characterized by delta H much less than 0; delta Cp approximately 0, suggesting enhancement of van der Waals' and/or H-bonding interactions, together with an increased exposure to solvent of hydrophobic residues of gp23* in the expanded state. These findings illuminate hypotheses of capsid assembly based on conformational properties of gp23: inter alia, they indicate a role for the N-terminal portion of gp23 in regulating polymerization, and force a reappraisal of models of capsid swelling based on the swivelling of conserved domains.     

Proteolysis of the major capsid protein T4 bacteriophage polyheads limited by quaternary structure.

Bacteriophage T4 carrying an amber mutation in gene 22 plus an amber mutation in gene 21 form aberrant, tubular structures termed rough polyheads, instead of complete phage when they infect Escherichia coli B. These rough polyheads consist almost entirely of the major capsid protein in its uncleaved form (gp23). When rough polyheads are treated under mild conditions with any of the five proteases, trypsin, chymotrypsin, thermolysin, pronase, or the protease from Staphylococcus aureus V8, the gp23 is rapidly hydrolyzed at a limited number of peptide bonds. In contrast, cleaved capsid protein (gp23) in mature phage capsids is completely resistant to proteolysis under the same conditions. A major project in this laboratory requires determining the primary structure of gp23, a large protein (Mr = 58,000) quite rich in those amino acids at which cleavages are achieved by conventional means. Recovery of peptides from the complex mixtures resulting from such cleavages proved to be extremely difficult. The limited proteolysis of gp23 in rough polyheads had yielded a set of large, easily purified fragments which are greatly simplifying the task of determining the primary structure of this protein.     

Structural changes during the transformation of bacteriophage T4 polyheads: II. Evidence that a conformational change in the major capsid protein precedes the expansion

The shell of the bacteriophage T4 prehead is transformed after the maturation cleavages from a fragile to a highly chemically resistant structure. A “cleaved but anchored” shell, in which the capsid protein has been cleaved but expansion to the mature structure has not yet occurred, is thought to be an intermediate in the transformation. We have compared native, trypsinized, temperature-sensitive mutant, and cleaved but anchored polyheads for differences and similarities in their capsomeres. Our results show that the altered capsomeres of the cleaved but anchored state must be attributed to a conformational change in the subunits, and not simply to the loss of the amino-terminal peptide by proteolysis.     

Crystalline aggregation of a proteolytic fragment of the major head protein of bacteriophage T4.

An analysis has been made of the composition and structure of the two types of sheets assembled from material from dissociated bacteriophage T2 (Poglazov &; Mesyhanzhinov, 1967) and T4 capsids. Serological techniques have been used to show that both types of sheet are assembled from proteolytic fragment of P23¹, the major capsid constituent. The two types of sheets have been found to interconvert depending on the concentration of Mg²⁺ ions in the buffer. Computer modelling experiments show that the “hexagonal” and “rectangular” morphologies observed in the negative stain are due to in-register and staggered associations, respectively, of a single basic hexagonal lattice. Analysis by polyacrylamide gel electrophoresis of samples of sheets and dissociated capsids, together with previous results from immune electron microscopy (Kistler et al., 1978), suggest that hexamers of the proteolytic fragment are derived conservatively from capsomers of the phage head.The value of this proteolytic P23 fragment has been twofold: (1) it has proved to be a useful peptide in the ongoing primary sequence determination of P23 and (2) antibodies raised against it have been employed to follow the fate of P23 antigenic sites during various steps of phage capsid maturation (Kistler et al., 1978).     

Mutations that eliminate the requirement for the vertex protein in bacteriophage T4 capsid assembly.

The capsid of bacteriophage T4 is composed of two essential structural proteins, gp23, the major constituent of the capsid, and gp24, a less prevalent protein that is located in the pentameric vertices of the capsid. gp24 is required both to stabilize the capsid and to allow it to be further matured. This requirement can be eliminated by bypass-24 (byp24) mutations within g23. We have isolated, cloned and sequenced several new byp24 mutations. These mutations are cold-sensitive in the absence of gp24, and are located in regions of g23 not known to contain any other mutations affecting capsid assembly. The cold-sensitivity of the byp24 mutations can be reduced by further mutations within g23 (trb mutations). Cloning and sequencing of these trb mutations has revealed that they lie in regions of g23 that contain clusters of mutations that cause the production of high levels of petite and giant phage (ptg mutations). Despite the proximity of the trb mutations to the ptg mutations, none of the ptg mutations has a Trb phenotype. The mutation ptE920g, which is also located near one of the ptg clusters, and which produces only petite and wild-type phage, has been shown to confer a Trb but not a Byp24 phenotype. The relevance of these observations to our understanding of capsid assembly is discussed.     

Conformational changes of murine polyomavirus capsid proteins induced by sialic acid binding

Murine polyomavirus (Py) infection initiates by the recognition of cell membrane molecules containing terminal sialic acid (SA) residues through specific binding pockets formed at the major capsid protein VP1 surface. VP1 Pockets 1, 2, and 3 bind terminal SA, Gal, and second branched SA, respectively. The consequence of recognition on viral cell entry remains elusive. In this work, we show that preincubation of Py with soluble compounds within Pocket 1 (N-acetyl or N-glycolyl neuraminic acids) increases Py cell binding and infectivity in murine 3T6 fibroblasts. In contrast, Gal does not significantly alter Py binding nor infectivity, whereas sialyllactose, in Pockets 1 and 2, decreases cell binding and infectivity. Binding experiments with Py virus-like particles confirmed the direct involvement of VP1 in this effect. To determine whether such results could reflect VP1 conformational changes induced by SA binding, protease digestion assays were performed after pretreatment of Py or virus-like particles with soluble receptor fragments. Binding of SA with the VP1 Pocket 1, but not of compounds interacting with Pocket 2, was associated with a transition of this protein from a protease-sensitive to a protease-resistant state. This effect was transmitted to the minor capsid proteins VP2 and VP3 in virus particles. Attachment of Py to cell monolayers similarly led to a VP1 trypsin-resistant pattern. Taken together, these data present evidence that initial binding of Py to terminal SA induces conformational changes in the viral capsid, which may influence subsequent virus cell entry steps.     

Conformational rearrangements of bacteriophage T4 lysozyme during its binding to the inhibitor]

The structural changes of bacteriophage T4 lysozyme during its binding to the inhibitor, i. e. disaccharide-tetrapeptide N-acetylglucosaminyl-N-acetylmuraminyl - L - alanyl-gamma-D-glutaminyl - mesodiaminopimelyl-D-alanine) isolated from Escherichia coli cell wall have been studied. During the inhibitor binding to the protein the degree of helicity decreases by approximately 14% as was shown using the circular dichroism technique. The changes in optical properties of tryptophane, tyrosine and phenylalanine residues detected by UV difference and fluorescence spectroscopy have been observed. Based on the experimental data and a comparison of spatial organization of phage T4 lysozyme and chicken egg-white lysozyme made it possible to develop a structural model of phage T4 lysozyme functioning. This model may account for the differences in specificity of action of bacteriophage T4 and chicken egg-white lysozymes and allows to establish the role of the "extra" part of phage lysozyme. According to the model, at the first stage of binding the peptide part of the substrate comes in contact with the "upper" (with respect to the cleft) part of the protein molecule (residues 106--116 and 135--140). This results in rearrangement of the molecule, with opening of the cleft at the second stage. This makes possible the access of the polysaccharide part of the substrate of the active site and a subsequent hydrolysis of the beta (1 leads to 4) glycoside bond.     

regA protein of bacteriophage T4D: identification, schedule of synthesis, and autogenous regulation.

Proteins labeled with 14C-amino acids after infection of Escherichia coli B by T4 phage were examined by electrophoresis in the presence of sodium dodecyl sulfate. Four regA mutants (regA1, regA8, regA11, and regA15) failed to make a protein having a molecular weight of about 12,000, whereas mutant regA9 did make such a protein; regA15 produced a new, apparently smaller protein that was presumably a nonsense fragment, whereas regA11 produced a new, apparently larger protein. We conclude that the 12,000-dalton protein was the product of the regA gene. The molecular weight assignment rested primarily on our finding that the regA protein had the same mobility as the T4 gene 33 protein, which we identified by electrophoresis of whole-cell extracts of E. coli B infected with a gene 33 mutant, amE1120. Synthesis of wild-type regA protein occurred from about 3 to 11 min after infection at 37 degrees C in the DNA+ state and extended to about 20 min in the DNA- state. However, synthesis of the altered regA proteins of regA9, regA11, and regA15 occurred at a higher rate and for a much longer period in both the DNA+ and DNA- states; thus, the regA gene is autogenously regulated. At 30 degrees C, both regA9 and regA11 exhibited partial regA function by eventually shutting off the synthesis of many T4 early proteins; the specificity of this shutoff differed between these two mutants. We also obtained evidence that the regA protein is not Stevens's "polypeptide 3." As a technical point, we found that, when quantitating acid-precipitable radioactivity in protein samples containing sodium dodecyl sulfate, it was necessary to use 15 to 20% trichloroacetic acid; use of 5% acid, e.g., resulted in loss of over half of the labeled protein.     

Chaperonin-mediated folding of bacteriophage T4 major capsid protein. II. Production of gene product 23 deletion mutants

Folding of bacteriophage T4 major capsid protein, gene product 23 (534 a.a.), is aided by two proteins: E. coli GroEL chaperonin and viral gp31 co-chaperonin. In the present work a set of mutants with extensive deletions inside gene 23 using controlled digestion with Bal31 nuclease has been constructed. Proteins with deletions were co-expressed from plasmid vectors with phage gp31 co-chaperonin. Deletions from 8 to 33 a.a. in the N-terminal region of the gp23 molecule covering the protein proteolytic cleavage site during capsid maturation have no influence on the mutants' ability to produce in E. coli cells proteins which form regular structures—polyheads. Deletions in other regions of the polypeptide chain (187-203 and 367-476 a.a.) disturb the correct folding and subsequent assembly of gp23 into polyheads.     

Analysis of capsid portal protein and terminase functional domains: interaction sites required for DNA packaging in bacteriophage T4.

Bacteriophage DNA packaging results from an ATP-driven translocation of concatemeric DNA into the prohead by the phage terminase complexed with the portal vertex dodecamer of the prohead. Functional domains of the bacteriophage T4 terminase and portal gene 20 product (gp20) were determined by mutant analysis and sequence localization within the structural genes. Interaction regions of the portal vertex and large terminase subunit (gp17) were determined by genetic (terminase-portal intergenic suppressor mutations), biochemical (column retention of gp17 and inhibition of in vitro DNA packaging by gp20 peptides), and immunological (co-immunoprecipitation of polymerized gp20 peptide and gp17) studies. The specificity of the interaction was tested by means of a phage T4 HOC (highly antigenicoutercapsid protein) display system in which wild-type, cs20, and scrambled portal peptide sequences were displayed on the HOC protein of phage T4. Binding affinities of these recombinant phages as determined by the retention of these phages by a His-tag immobilized gp17 column, and by co-immunoprecipitation with purified terminase supported the specific nature of the portal protein and terminase interaction sites. In further support of specificity, a gp20 peptide corresponding to a portion of the identified site inhibited packaging whereas the scrambled sequence peptide did not block DNA packaging in vitro.The portal interaction site is localized to 28 residues in the central portion of the linear sequence of gp20 (524 residues). As judged by two pairs of intergenic portal-terminase suppressor mutations, two separate regions of the terminase large subunit gp17 (central and COOH-terminal) interact through hydrophobic contacts at the portal site. Although the terminase apparently interacts with this gp20 portal peptide, polyclonal antibody against the portal peptide appears unable to access it in the native structure, suggesting intimate association of gp20 and gp17 possibly internalizes terminase regions within the portal in the packasome complex. Both similarities and differences are seen in comparison to analogous sites which have been identified in phages T3 and lambda.     

Maturation of giardiavirus capsid protein involves posttranslational proteolytic processing by a cysteine protease.

The double-stranded RNA genome of giardiavirus (GLV) has only two large open reading frame (ORFs). The 100-kDa capsid polypeptide (p100) is encoded by ORF1, whereas the only other viral polypeptide, the 190-kDa GLV RNA-dependent RNA polymerase (p190), is synthesized as an ORF1-ORF2 fusion protein by a (-1) ribosomal frameshifting. Edman degradation revealed that p100 was N-terminally blocked except for 2 to 5% of it that showed free N terminus starting from amino acid residue 33 of ORF1. Studies using antiserum targeted against amino acid residues 6 to 27 indicated that this region (NT) is absent from viral p100 and p190, while pulse-labelling experiments showed that NT is present in nascent p100 synthesized in GLV-infected Giardia lamblia but removed subsequently. In contrast, this region was retained in the two viral proteins synthesized in vitro, and it was not removed upon prolonged incubation or inclusion of microsomal fraction in the in vitro translation reaction mixtures. These results suggest that endoplasmic reticulum is not involved in the protein processing and that the precursors of p100 and p190 are incapable of cleaving themselves or each other. This specific cleavage was reproduced when lysates from GLV-infected G. lamblia were added, but not those from uninfected cells. The cleavage activity was relatively insensitive to phenylmethylsulfonyl fluoride, but it was inhibitable by leupeptin or E-64, two known specific inhibitors of cysteine protease. The possible origin of this processing activity is discussed.     

Thermodynamic stability and point mutations of bacteriophage T4 lysozyme

The thermodynamics of melting of bacteriophage T4 lysozyme and four of its mutants have been measured by van't Hoff methods. The effect of pH has been explored and utilized to obtain the dependence of the enthalpy on temperature as suggested by Privalov and co-workers. The enthalpy change is a steep linear function of temperature. ΔC_p is large and constant within experimental error. Changes in ΔH_u are as large as 30% for a single point mutation. Changes in enthalpy are largely compensated by changes in entropy. Changes in stability, as measured by the free energy of unfolding, are smaller than those of ΔH, but are very large in a relative sense, since ΔG is very much smaller than ΔH. Origins of the destabilization caused by mutations are discussed.     

Genetic control of capsid length in bacteriophage T4 VII. A model of length regulation based on DNA size

Four models for head length regulation in bacteriophage T4 are described and discussed. Several length mutants in the major capsid protein gene (23) were studied by sucrose gradient analysis, rotating gel analysis of DNA length, and by mixed infection gene dosage experiments with T4 amber mutants in gene 24. The results show that head length variation is quantized and highly specific, in that certain amino acid changes in gp23 results in reproducible and well-defined head length phenotypes. These data are presented as being most consistent with a vernier-type of head length control mechanism.     

DNA binding site of the helix destabilizing protein gp32 from bacteriophage T4.

A helix destabilizing protein, the product of gene 32 (gp32) of bacteriophage T4, was subjected to limited proteolysis to produce three types of products with differing affinities for DNA. Previous work has suggested that the 18 amino acids at the N-terminus are required for tight binding to single-stranded DNA (Hosoda &; Moise, 1978). This paper reports the sequence of the N-terminal region and predicts the amino acid residues responsible for DNA binding.     

Direct binding of a hepatitis C virus inhibitor to the viral capsid protein

Over 130 million people are infected chronically with hepatitis C virus (HCV), which, together with HBV, is the leading cause of liver disease. Novel small molecule inhibitors of Hepatitis C virus (HCV) are needed to complement or replace current treatments based on pegylated interferon and ribavirin, which are only partially successful and plagued with side-effects. Assembly of the virion is initiated by the oligomerization of core, the capsid protein, followed by the interaction with NS5A and other HCV proteins. By screening for inhibitors of core dimerization, we previously discovered peptides and drug-like compounds that disrupt interactions between core and other HCV proteins, NS3 and NS5A, and block HCV production. Here we report that a biotinylated derivative of SL209, a prototype small molecule inhibitor of core dimerization (IC(50) of 2.80 μM) that inhibits HCV production with an EC(50) of 3.20 μM, is capable of penetrating HCV-infected cells and tracking with core. Interaction between the inhibitors, core and other viral proteins was demonstrated by SL209-mediated affinity-isolation of HCV proteins from lysates of infected cells, or of the corresponding recombinant HCV proteins. SL209-like inhibitors of HCV core may form the basis of novel treatments of Hepatitis C in combination with other target-specific HCV drugs such as inhibitors of the NS3 protease, the NS5B polymerase, or the NS5A regulatory protein. More generally, our work supports the hypothesis that inhibitors of viral capsid formation might constitute a new class of potent antiviral agents, as was recently also shown for HIV capsid inhibitors.