A novel genetically engineered pathway for synthesis of poly(hydroxyalkanoic acids) in Escherichia coli

A new pathway to synthesize poly(hydroxyalkanoic acids) (PHA) was constructed by simultaneously expressing butyrate kinase (Buk) and phosphotransbutyrylase (Ptb) genes of Clostridium acetobutylicum and the two PHA synthase genes (phaE and phaC) of Thiocapsa pfennigii in Escherichia coli. The four genes were cloned into the BamHI and EcoRI sites of pBR322, and the resulting hybrid plasmid, pBPP1, conferred activities of all three enzymes to E. coli JM109. Cells of this recombinant strain accumulated PHAs when hydroxyfatty acids were provided as carbon sources. Homopolyesters of 3-hydroxybutyrate (3HB), 4-hydroxybutyrate (4HB), or 4-hydroxyvalerate (4HV) were obtained from each of the corresponding hydroxyfatty acids. Various copolyesters of those hydroxyfatty acids were also obtained when two of these hydroxyfatty acids were fed at equal amounts: cells fed with 3HB and 4HB accumulated a copolyester consisting of 88 mol% 3HB and 12 mol% 4HB and contributing to 68.7% of the cell dry weight. Cells fed with 3HB and 4HV accumulated a copolyester consisting of 94 mol% 3HB and 6 mol% 4HV and contributing to 64.0% of the cell dry weight. Cells fed with 3HB, 4HB, and 4HV accumulated a terpolyester consisting of 85 mol% 3HB, 13 mol% 4HB, and 2 mol% 4HV and contributing to 68.4% of the cell dry weight.     

Production of copolymer consisting of 3-hydroxybutyrate and 3-hydroxyvalerate by fed-batch culture of Alcaligenes SP. SH-69

Summary Production of copolymer consisting of 3-hydroxybutyrate and 3-hydroxyvalerate [poly(3HB-co-3HV)] by fed-batch culture of Alcaligenes sp. SH-69 was investigated using glucose as a sole carbon source. Synthesis of poly(3HB-co-3HV) during the polymer accumulation stage was favored under dissolved oxygen tension at 20% and C/N ratio (mol glucose/mol ammonium) of 23.1. When conditions were optimal, 36 g liter^-1 of poly(3HB-co-3HV) containing 3.0 mol% of 3HV was produced. Decreasing C/N ratio resulted in an increase of 3HV fraction in the copolymer to a maximum level of 6.3 mol%.     

Accumulation of a poly(hydroxyalkanoate) copolymer containing primarily 3-hydroxyvalerate from simple carbohydrate substrates by Rhodococcus sp. NCIMB 40126

A number of taxonomically-related bacteria have been identified which accumulate poly(hydroxyalkanoate) (PHA) copolymers containing primarily 3-hydroxyvalerate (3HV) monomer units from a range of unrelated single carbon sources. One of these, Rhodococcus sp. NCIMB 40126, was further investigated and shown to produce a copolymer containing 75 mol% 3HV and 25 mol% 3-hydroxybutyrate (3HB) from glucose as sole carbon source. Polyesters containing both 3HV and 3HB monomer units, together with 4-hydroxybutyrate (4HB), 5-hydroxyvalerate (5HV) or 3-hydroxyhexanoate (3HHx), were also produced by this organism from certain accumulation substrates. With valeric acid as substrate, almost pure (99 mol% 3HV) poly(3-hydroxyvalerate) was produced. N.m.r. analysis confirmed the composition of these polyesters. The thermal properties and molecular weight of the copolymer produced from glucose were comparable to those of PHB produced by Alcaligenes eutrophus.     

Production of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by <Emphasis Type="Italic">Rhodopseudomonas palustris</Emphasis> SP5212

Summary Production of poly(3-hydroxybutyric acid) [P(3HB)] by Rhodopseudomonas palustris SP5212 isolated in this laboratory has been optimized under phototrophic microaerophilic conditions. Cells grown in malate medium accumulated 7.7% (w/w) P(3HB) of cellular dry weight at the early stationary phase of growth. The accumulated P(3HB) however, attained 15% (w/w) of cellular dry weight when acetate (1.0%, w/v) was used as the sole carbon source under nitrogen-limiting conditions. Synthesis and accumulation of polymer was favoured by sulphate-free conditions and at a phosphate concentration sub-optimal for growth. The polymer content of cells was increased drastically (34% of cellular dry weight) when the acetate containing medium was supplemented with n-alkanoic acids. Compositional analysis by H¹ NMR revealed that these accumulated polymers were composed of 3-hydroxybutyric acid and 3-hydroxyvaleric acid (3HV). The contents of 3HV in these copolymers ranged from 14 to 38 mol%.     

Production of a copolyester of 3-hydroxybutyric acid and 3-hydroxyvaleric acid from single unrelated carbon sources by a mutant of Alcaligenes eutrophus

Summary Alcaligenes eutrophus mutant strain R3, which is a spontaneous revertant to prototrophy of an isoleucine-auxotrophic mutant of the wild-type strain H16, accumulated a copolyester consisting of 3-hydroxybutyric acid (3HB) as main constituent and of 3-hydroxyvaleric acid (3HV), i.e. poly(3HB-co-3HV), as the only other constituent from various single unrelated substrates, which were provided in excess, after a nutrient essential for growth was depleted in the medium. Poly(SHB-co-3HV) was produced from fructose, gluconate, succinate, acetate or lactate during cell starvation of the nitrogen, sulphur or magnesium source. Although 3HV amounted to only 8 mol% of the constituents of the polyester, this study provides a general rationale for construction and utilization of mutants of poly(3HB)-accumulating bacteria that are altered in the metabolism of branched-chain amino acids for the production of poly(3HB-co-3HV) from single unrelated substrates. Offprint requests to: A. Steinbüchel     

Production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with high molar fractions of 3-hydroxyvalerate by a threonine-overproducing mutant of Alcaligenes sp. SH-69

A threonine overproducing mutant of Alcaligenes sp. SH-69 was isolated and its ability to produce poly(3-hydroxybutyrate-co-3-hydroxyvalerate), poly(3HB-co-3HV), was investigated. The 3HV fraction in poly(3HB-co-3HV) produced from glucose as the sole carbon source exceeded 22 mol%, which is approximately six times higher than that achieved by the wild type under the same culture conditions. Furthermore, the addition of a relatively low concentration (10 mM) of propionic acid, valeric acid or levulinic acid to the glucose medium greatly increased the molar fraction of 3HV in the copolyester, to 38–77 mol%. The results suggest that metabolic engineering of the biosynthetic pathways supplying polyhydroxyalkanoate monomers, such as the threonine biosynthetic pathway, can lead to new poly(3HB-co-3HV)-producing strains.     

Role of fadR and atoC(Con) mutations in poly(3-hydroxybutyrate-co-3-hydroxyvalerate) synthesis in recombinant pha+ Escherichia coli.

Recombinant Escherichia coli fadR atoC(Con) mutants containing the polyhydroxyalkanoate (PHA) biosynthesis genes from Alcaligenes eutrophus are able to incorporate significant levels of 3-hydroxyvalerate (3HV) into the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)]. We have used E. coli fadR (FadR is a negative regulator of fatty acid oxidation) and E. coli atoC(Con) (AtoC is a positive regulator of fatty acid uptake) mutants to demonstrate that either one of these mutations alone can facilitate copolymer synthesis but that 3HV levels in single mutant strains are much lower than in the fadR atoC(Con) strain. E. coli atoC(Con) mutants were used alone and in conjunction with atoA and atoD mutants to determine that the function of the atoC(Con) mutation is to increase the uptake of propionate and that this uptake is mediated, at least in part, by atoD+. Similarly, E. coli fadR mutants were used alone and in conjunction with fadA, fadB, and fadL mutants to show that the effect of the fadR mutation is dependent on fadB+ and fadA+ gene products. Strains that were mutant in the fadB or fadA locus were unable to complement a PHA biosynthesis pathway that was mutant at the phaA locus (thiolase), but a strain containing a fadR mutation and which was fadA+ fadB+ was able to complement the phaA mutation and incorporated 3HV into P(3HB-co-3HV) to a level of 29 mol%.     

Biosynthesis of poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-3-hydroxyvalerate) copolyesters with a high molar fraction of 3-hydroxyvalerate by an insect-symbiotic <Emphasis Type="Italic">Burkholderia</Emphasis> sp. IS-01

Burkholderia sp. IS-01 capable of biosynthesizing poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [poly(3HB-co-3HV)] copolyesters with a high molar fraction of 3HV was isolated from the gut of the adult longicorn beetle, Moechotypa diphysis. The strain IS-01 was relatively tolerant to high concentrations of levulinic acid and accumulated a poly(13.5 mol% 3HB-co-86.5 mol% 3HV) copolyester when cultivated on a mixture of gluconate (20 g/L) and levulinic acid (12.5 g/L). In this case, the content of the copolyester in the cells was approximately 60.0%. The compositions of the copolyesters were easily regulated by altering the molar ratio of gluconate and levulinic acid in the medium. The organism was found to possess a class I PHA synthase (PhaC) gene (1,881 bp) that encodes a protein with a deduced molecular mass of 68,538 Da that consists of 626 amino acids. The PhaC of this organism was most similar to that of B. cenocepacia PC184 (92% similarity).     

Genetically modified strains of Ralstonia eutropha H16 with β-ketothiolase gene deletions for production of copolyesters with defined 3-hydroxyvaleric acid contents

β-Ketothiolases catalyze the first step of poly(3-hydroxybutyrate) [poly(3HB)] biosynthesis in bacteria by condensation of two acetyl coenzyme A (acetyl-CoA) molecules to acetoacetyl-CoA and also take part in the degradation of fatty acids. During growth on propionate or valerate, Ralstonia eutropha H16 produces the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [poly(3HB-co-3HV)]. In R. eutropha, 15 β-ketothiolase homologues exist. The synthesis of 3-hydroxybutyryl-CoA (3HB-CoA) could be significantly reduced in an 8-fold mutant (Lindenkamp et al., Appl. Environ. Microbiol. 76:5373-5382, 2010). In this study, a 9-fold mutant deficient in nine β-ketothiolase gene homologues (phaA, bktB, H16_A1713, H16_B1771, H16_A1528, H16_B0381, H16_B1369, H16_A0170, and pcaF) was generated. In order to examine the polyhydroxyalkanoate production capacity when short- or long-chain and even- or odd-chain-length fatty acids were provided as carbon sources, the growth and storage behavior of several mutants from the previous study and the newly generated 9-fold mutant were analyzed. Propionate, valerate, octanoate, undecanoic acid, or oleate was chosen as the sole carbon source. On octanoate, no significant differences in growth or storage behavior were observed between wild-type R. eutropha and the mutants. In contrast, during the growth on oleate of a multiple mutant lacking phaA, bktB, and H16_A0170, diminished poly(3HB) accumulation occurred. Surprisingly, the amount of accumulated poly(3HB) in the multiple mutants grown on gluconate differed; it was much lower than that on oleate. The β-ketothiolase activity toward acetoacetyl-CoA in H16ΔphaA and all the multiple mutants remained 10-fold lower than the activity of the wild type, regardless of which carbon source, oleate or gluconate, was employed. During growth on valerate as a sole carbon source, the 9-fold mutant accumulated almost a poly(3-hydroxyvalerate) [poly(3HV)] homopolyester with 99 mol% 3HV constituents.     

Synthesis and production of poly(3-hydroxyvaleric acid) homopolyester by Chromobacterium violaceum

Chromobacterium violaceum DSM 30191 accumulated a homopolyester of 3-hydroxyvaleric acid (3HV) up to 65% of the cellular dry matter during cultivation in fed-batch cultures with valeric acid as sole carbon source and during cell starvation of the nitrogen source. From fructose, gluconate, propionate or hexanoate a homopolyester of 3-hydroxybutyrate (3HB) was accumulated. Poly(3HV) homopolyster was also accumulated by two different strains of C. violaceum, whereas two other strains of C. violaceum and three strains of Janthinobacterium lividum accumulated poly(3HB-co-3HV) copolyesters from valerate. The composition of the biosynthetic poly(3HV) was confirmed by various nuclear magnetic resonance spectroscopic methods. Differential scanning calorimetry analysis of four poly(3HV) samples that were isolated from different batches of cells revealed glass transition temperatures between –10 and –12°C and melting points between 107 and 112°C. Viscosity measurements gave intrinsic viscosities between 62.5 and 124.8 × 10^–2 dl/g for these samples, indicating approximate relative molecular masses between 60 000 and 145 000 of the biosynthetic poly(3HV). Correspondence to: A. Steinbüchel     

Enzymatic and non-enzymatic degradation of poly (3-hydroxybutyrate-co-3-hydroxyvalerate) copolyesters produced by Alcaligenes sp. MT-16

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate), poly(3HB-co-3HV), copolyesters with a variety of 3HV contents (ranging from 17 to 60 mol%) were produced by Alcaligenes sp. MT-16 grown on a medium containing glucose and levulinic acid in various ratios, and the effects of hydrophilicity and crystallinity on the degradability of the copolyesters were evaluated. Measurements of thermo-mechanical properties and Fourier-transform infrared spectroscopy in the attenuated total reflectance revealed that the hydrophilicity and crystallinity of poly(3HB-co-3HV) copolyesters decreased as 3HV content in the copolyester increased. When the prepared copolyester film samples were non-enzymatically hydrolysed in 0.01 N NaOH solution, the weights of all samples were found to have undergone no changes over a period of 20 weeks. In contrast, the copolyester film samples were degraded by the action of extracellular polyhydroxybutyrate depolymerase from Emericellopsis minima W2. The overall rate of weight loss was higher in the films containing higher amounts of 3HV, suggesting that the enzymatic degradation of the copolyester is more dependent on the crystallinity of the copolyester than on its hydrophilicity. Our results suggest that the degradability characteristics of poly(3HB-co-3HV) copolyesters, as well as their thermo-mechanical properties, are greatly influenced by the 3HV content in the copolyesters.     

Degradation of poly(3-hydroxyoctanoic acid) [P(3HO)] by bacteria: purification and properties of a P(3HO) depolymerase from Pseudomonas fluorescens GK13.

Twenty-five gram-negative bacteria and one gram-positive bacterium capable of growing on poly(3-hydroxyoctanoic acid) [P(3HO)] as the sole source of carbon and energy were isolated from various soils, lake water, and activated sludge. Most of the isolates degraded only P(3HO) and copolymers of medium-chain-length (MCL) hydroxyalkanoic acids (HA). Except for the gram-positive strain, which was able to hydrolyze P(3HO) and poly(3-hydroxybutyric acid) [P(3HB)], no isolate was able to degrade polymers of short-chain-length HA, such as P(3HB) or poly(3-hydroxyvalerate) [P(3HV)]. All strains utilized a large variety of monomeric substrates for growth. All gram-negative strains, but not the gram-positive strain, accumulated poly(hydroxyalkanoic acids) (PHA), consisting of MCL HA, if they were cultivated under accumulation conditions. One strain, which was identified as Pseudomonas fluorescens GK13 (biovar V), was selected and the extracellular P(3HO) depolymerase of this strain was purified from the culture medium of P(3HO)-grown cells by chromatography with Octyl-Sepharose CL4B and by gel filtration with Superose 12. The relative molecular weights of the native and sodium dodecyl sulfate-treated enzymes were 48,000 and 25,000, respectively. The purified enzyme hydrolyzed P(3HO), copolymers of MCL HA, and para-nitrophenyl esters of fatty acids. P(3HB), P(3HV), and characteristic substrates for lipases, such as Tween 80 or triolein, were not hydrolyzed. The P(3HO) depolymerase of P. fluorescens GK13 was insensitive to phenylmethylsulfonyl fluoride and dithioerythritol, unlike other PHA depolymerases. The dimeric ester of 3-hydroxyoctanoic acid was identified as the main product of enzymatic hydrolysis of P(3HO).(ABSTRACT TRUNCATED AT 250 WORDS)     

Maximum production strategy for biodegradable copolymer P(HB-co-HV) in fed-batch culture of Alcaligenes eutrophus

A novel strategy for the maximum production of a biodegradable copolymer, poly(3-hydroxybutyric-co-hydroxyvaleric) acid, P(HB-co-HV), was developed, based on the kinetic parameters obtained from fed-batch culture experiments of Alcaligenes eutrophus. The effects of various culture conditions such as mole ratio of carbon:nitrogen in feed medium (C/N); total fatty acids concentrations; and addition ratio of fatty acids on cultivation properties such as the specific rates of cell formation, mu (h-1), P(HB-co-HV) production, rho[g.P(HB-co-HV)/g.cell/h], production yield from fatty acids [g.P(HB-co-HV)/g.fatty acid], and mole fraction of monomeric units in the copolymer [mol.(HV)/{mol.(HB) + mol.(HV)}], were investigated. When nitrogen supply was sufficient for cell growth; that is, C/N (mol.nitrogen atom/mol.carbon atom) was low, mu was high, but rho and the production yield were low, because fatty acids were used mainly for energy formation and anabolic reactions in the cells. On the other hand, when nitrogen supply was limited for cell growth-that is, C/N was high-rho was high. The highest value of rho was obtained when C/N was 75. As the mole ratio of valeric acid (VA) to butyric acid (BA) in the feed medium was increased, the mole fraction of HV units in P(HB-co-HV) increased linearly. When the ratio of BA to VA in the feed medium was kept at a constant value, but C/N was increased, the mole fraction of HV units decreased. In particular, when C/N was >12, the mole fraction of HV units decreased linearly as C/N increased. When VA was utilized as the sole carbon source and C/N was fixed at 4, P(HB-co-HV) with the highest mole fraction of HV units (67 mol%) was achieved. From these results, it was shown that both C/N and the mole ratio of BA to VA in the feed medium should be well controlled for an optimal production of P(HB-co-HV) with the desired value of the mole fraction of HV units. When the addition ratio of butyric acid was 50 wt% of total fatty acids, a maximum production strategy for P(HB-co-HV) was developed and realized experimentally, which was based on a model of the relationship between mu and rho.     

Production of copolyesters of 3-hydroxybutyrate and 3-hydroxyvalerate by Alcaligenes eutrophus from butyric and pentanoic acids

Summary Copolyesters of 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (3HV) have been produced by Alcaligenes eutrophus in nitrogenfree culture solutions of butyric and pentanoic acids. When pentanoic acid was used as the sole carbon source, a copolyester with an unusually high 3HV fraction of 90 mol% was produced. Copolyesters with a wide range of compositions (0–90 mol% 3HV) were obtained by using butyric and pentanoic acids together as carbon sources. The biosynthetic pathways of poly(3-hydroxybutyrate) were investigated using [1-¹³C]acetate and [1-¹³C]butyrate. It is suggested that butyric and pentanoic acids are incorporated into the copolyester as 3HB and 3HV units respectively without decomposition of the carbon skeletons in the cell.     

Production of the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with varied composition using different nitrogen sources with Haloferax mediterranei

The extreme haloarchaea Haloferax mediterranei accumulates poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) without the need for specific precursors. In this study, growth kinetics and PHBV synthesis were characterised under nitrogen-excess and nitrogen-limiting conditions in ammonium and, for the first time, nitrate. With excess nitrogen, ammonium and nitrate cultures generated 10.7 g/L biomass containing 4.6 wt% PHBV and 5.6 g/L biomass with 9.3 wt% PHBV, respectively. Copolymer composition varied with the nitrogen source used: PHBV from ammonium cultures had 16.9 mol% 3-hydroxyvalerate (HV), while PHBV from nitrate cultures contained 12.5 mol% HV. Nitrogen limitation was achieved with carbon-to-nitrogen (C/N) molar ratios of 25 or higher. Nitrogen limitation reduced biomass generation and polymer concentration, but polymer accumulation increased to 6.6 and 9.4% for ammonium and nitrate, respectively, with C/N 42. PHBV composition was also affected and cultures with lower C/N ratios produced richer HV polymers. Copolymer formation was not a uniform process: HV was only detected after a minimum accumulation of 0.45 g/L PHB and lasted for a maximum of 48 h. The understanding of copolymer synthesis and the influence of culture conditions such as the nitrogen source will help in designing novel strategies for the production of PHBV with more regular structure and material properties.

     

Enhanced production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by fed-batch cultures of Pseudomonas sp EL-2

Pseudomonas sp EL-2 was cultivated to produce poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] from a structurally unrelated carbon source, glucose, by a fed-batch culture technique. Variation of the carbon to nitrogen (C/N) ratio of the medium produced optimal P(3HB-co-3HV) production at a C/N ratio of 95. Production of P(3HB-co-3HV) was favored by a dissolved oxygen tension of 40%. A maximum biomass concentration of 38 g L⁻¹ containing 53% P(3HB-co-3HV) was achieved after 45 h of cultivation. This corresponds to a volumetric productivity of 0.84 g L⁻¹ h⁻¹. The copolymer contained 7.5 mol% 3-hydroxyvalerate. Journal of Industrial Microbiology & Biotechnology (2000) 24, 36–40. Received 28 January 1999/ Accepted in revised form 11 September 1999     

Production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) from plant oil by engineered Ralstonia eutropha strains

The polyhydroxyalkanoate (PHA) copolymer poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(HB-co-HHx)] has been shown to have potential to serve as a commercial bioplastic. Synthesis of P(HB-co-HHx) from plant oil has been demonstrated with recombinant Ralstonia eutropha strains expressing heterologous PHA synthases capable of incorporating HB and HHx into the polymer. With these strains, however, short-chain-length fatty acids had to be included in the medium to generate PHA with high HHx content. Our group has engineered two R. eutropha strains that accumulate high levels of P(HB-co-HHx) with significant HHx content directly from palm oil, one of the world's most abundant plant oils. The strains express a newly characterized PHA synthase gene from the bacterium Rhodococcus aetherivorans I24. Expression of an enoyl coenzyme A (enoyl-CoA) hydratase gene (phaJ) from Pseudomonas aeruginosa was shown to increase PHA accumulation. Furthermore, varying the activity of acetoacetyl-CoA reductase (encoded by phaB) altered the level of HHx in the polymer. The strains with the highest PHA titers utilized plasmids for recombinant gene expression, so an R. eutropha plasmid stability system was developed. In this system, the essential pyrroline-5-carboxylate reductase gene proC was deleted from strain genomes and expressed from a plasmid, making the plasmid necessary for growth in minimal media. This study resulted in two engineered strains for production of P(HB-co-HHx) from palm oil. In palm oil fermentations, one strain accumulated 71% of its cell dry weight as PHA with 17 mol% HHx, while the other strain accumulated 66% of its cell dry weight as PHA with 30 mol% HHx.     

Thermophilic bacterium Caldimonas taiwanensis produces poly(3-hydroxybutyrate-co-3-hydroxyvalerate) from starch and valerate as carbon sources

Caldimonas taiwanensis accumulated polyhydroxybutyrate (PHB) at 55 °C from gluconate, fructose, maltose, and glycerol under nitrogen-limited condition. The PHB content peaked at 14 h after inoculation from gluconate. C. taiwanensis did not grow or accumulate PHA from fatty acids as the sole carbon source; however, it incorporated 3-hydroxyvalerate (3-HV) into PHB polymer from gluconate and valerate as a mixed carbon source. By adjusting the valerate concentration, the molar fraction of 3-HV could be modulated from 10 mol% to 95 mol%. Fatty acid valerate substantially inhibited cell growth and PHA accumulation with the addition of as little as 5 mM to the medium. Supplementing the medium with yeast extract overcame the inhibition, which enhanced not only the yield of biomass but also PHA productivity. The in vivo substrate specificity of PHA synthase ranged from C₄ to C₆. In addition, C. taiwanensis also incorporated a wide range of 3-HV into PHA from soluble starch and valerate as a mixed carbon source. Food-grade starches made from cassava, corn, potato, sweet potato and wheat respectively mixed with valerate were studied for poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] production. In this study, C. taiwanensis exhibited high promise for reducing the production cost of P(3HB-co-3HV).     

Economic considerations in the production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by bacterial fermentation

The process for the production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB/V)] by bacterial fermentation and its recovery was analysed. The effects of various factors such as P(3HB/V) content, P(3HB/V) productivity, P(3HB/V) yield and 3-hydroxyvalerate (3HV) fraction in P(3HB/V) on the production cost of P(3HB/V) were examined. The increase in the 3HV yield on a carbon source did not significantly decrease the production cost when the 3HV fraction was 10 mol%, because the cost of the carbon substrate for 3HV was relatively small in terms of the total cost. However, at a 3HV fraction of 30 mol%, the 3HV yield on a carbon source had a significant effect on the total P(3HB/V) production cost. The production cost of P(3HB/V) increased linearly with the increase in the 3HV fraction in P(3HB/V). Received: 8 September 1999 / Received revision: 2 December 1999 / Accepted: 3 December 1999     

Formation of poly(3-hydroxyalkanoates) by phototrophic and chemolithotrophic bacteria

The formation of poly(3-hydroxyalkanoic acid), PHA, by various strains of chemolithotrophic and phototrophic bacteria has been examined. Chemolithotrophic bacteria were grown aerobically under nitrogen-limiting conditions on various aliphatic organic acids. Phototrophic bacteria were grown anaerobically in the light on a nitrogen-rich medium and were subsequently transferred to a nitrogen-free medium containing acetate, propionate, valerate, heptanoate or octanoate as carbon source. All 41 strains investigated in this study were able to synthesize and accumulate PHA. All 11 strains of chemolithotrophic bacteria and all 15 strains belonging to the non-sulfur purple bacteria synthesized a polymer, which contained 3-hydroxy-valerate (3HV) beside 3-hydroxybutyrate (3HB), if the cells were cultivated in the presence of propionate, valerate or heptanoate. Many non-sulfur purple bacteria synthesized copolyesters of 3HB and 3HV even with acetate as carbon source. In contrast, most sulfur purple bacteria did not incorporate 3HV at all. Among 15 strains tested, only Chromatium vinosum strain 1611, C. purpuratum strain BN5500 and Lamprocystis roseopersicina strain 3112 were able to synthesize polyesters containing 3HV with propionate, valerate or heptanoate as carbon source.