Mapping loci controlling vernalization requirement in Brassica rapa

Brassica cultivars are classified as biennial or annual based on their requirement for a period of cold treatment (vernalization) to induce flowering. Genes controlling the vernalization requirement were identified in a Brassica rapa F₂ population derived from a cross between an annual and a biennial oilseed cultivar by using an RFLP linkage map and quantitative trait locus (QTL) analysis of flowering time in F₃ lines. Two genomic regions were strongly associated with variation for flowering time of unvernalized plants and alleles from the biennial parent in these regions delayed flowering. These QTLs had no significant effect on flowering time after plants were vernalized for 6 weeks, suggesting that they control flowering time through the requirement for vernalization. The two B. rapa linkage groups containing these QTLs had RFLP loci in common with two B. napus linkage groups that were shown previously to contain QTLs for flowering time. An RFLP locus detected by the cold-induced gene COR6.6 cloned from Arabidopsis thaliana mapped very near to one of the B. rapa QTLs for flowering time.     

Genetic analysis of floral anthocyanin pigmentation traits in Asiatic hybrid lily using molecular linkage maps

To understand the genetic background of two floral anthocyanin pigmentation traits, anthocyanin pigmentation in the flower tepals and spot formation, in the Asiatic hybrid lily (2n = 24), segregation of the two traits among 96 F₁ plants derived from a cross between commercial cultivars 'Montreux' and 'Connecticut King' were investigated. 'Montreux' has anthocyanin pigmentation in the tepals with many spots, and 'Connecticut King' has flowers with carotenoid pigmentation without spots. The F₁ plants with or without anthocyanin pigment in the tepals segregated with a 1:1 segregation ratio, indicating that a single gene controls anthocyanin pigmentation in the tepals. The number of spots per square centimeter of all tepals showed continuous distribution in the F₁ plants. To map the loci for the two anthocyanin pigmentation traits, molecular linkage maps in the Asiatic hybrid lily were constructed using a double pseudo-testcross strategy, with the same F₁ plants used for phenotypic evaluation, and 212 PCR-based DNA markers. The trait for anthocyanin pigmentation in tepals was used as a trait marker. The map of 'Montreux' comprised 95 markers in 26 linkage groups, and the map of 'Connecticut King' used 119 markers in 24 linkage groups. The total map lengths were 867.5 and 1,114.8 cM, respectively. The trait locus for anthocyanin pigmentation in the tepals was between markers ASR35-180 and P506-40 in linkage group 1 of the 'Montreux' map with a map distance of 1.2 cM and 2.6 cM, respectively. A single-point analysis of quantitative trait loci (QTLs) for tepal spot number identified two putative QTLs in linkage groups 1 and 19 of the 'Connecticut King' map. One putative QTL in linkage group 19 explained 64% of the total phenotypic variation. Because both putative QTLs were mapped on the linkage map of 'Connecticut King' that has no spots, dominant alleles of them might suppress spot formation.     

Mapping of the QTL (quantitative trait locus) conferring partial resistance to leaf blast in rice cultivar Chubu 32

The rice cultivar Chubu 32 possesses a high level of partial resistance to leaf blast. The number and chromosomal location of genes conferring this resistance were detected by restriction fragment length polymorphism (RFLP) linkage mapping and quantitative trait locus (QTL) analysis. For the mapping, 149 F₃ lines derived from the cross between rice cultivar Norin 29, with a low level of partial resistance, and Chubu 32 were used, and their partial resistance to leaf blast was assessed in upland nurseries. A linkage map covering six chromosomes and consisting of 36 RFLP markers was constructed. In the map, only one significant QTL (LOD>2.0) for partial resistance was detected on chromosome 11. This QTL explained 45.6% of the phenotypic variation. The segregation ratio of the F3 lines was 3:1 for partial resistance to susceptibility. These results suggest that the partial resistance in Chubu 32 is controlled by a major gene. Received: 15 March 2001 / Accepted: 13 August 2001     

Mapping the genome of rapeseed (Brassica napus L.). II. Localization of genes controlling erucic acid synthesis and seed oil content

A F₁ microspore-derived DH population, previously used for the development of a rapeseed RFLP map, was analysed for the distribution of erucic acid and seed oil content. A clear three-class segregation for erucic acid content could be observed and the two erucic acid genes of rapeseed were mapped to two different linkage groups on the RFLP map. Although the parents of the segregating DH population showed no significant difference in seed oil content, in the DH population a transgressive segregation in oil content was observed. The segregation closely followed a normal distribution, characteristic of a quantitative trait. Using the program MAPMAKER/QTL, three QTLs for seed oil content could be mapped on three different linkage groups. The additive effects of these QTLs explain about 51% of the phenotypic variation observed for this trait in the DH population. Two of the QTLs for oil content showed a close association in location to the two erucic acid genes, indicating a direct effect of the erucic acid genes on oil content.     

Molecular marker analysis of genes controlling morphological variation in Brassica rapa (syn. campestris)

Construction of a detailed RFLP linkage map of B. rapa (syn. campestris) made it possible, for the first time, to study individual genes controlling quantitative traits in this species. Ninety-five F₂ individuals from a cross of Chinese cabbage cv Michihili by Spring broccoli were analyzed for segregation at 220 RFLP loci and for variation in leaf, stem, and flowering characteristics. The number, location, and magnitude of genes underlying 28 traits were determined by using an interval mapping method. Zero to five putative quantitative trait loci (QTL) were detected for each of the traits examined. There were unequal gene effects on the expression of many traits, and the inheritance patterns of traits ranged from those controlled by a single major gene plus minor genes to those controlled by polygenes with small and similar effects. The effect of marker locus density on detection of QTL was analyzed, and the results showed that the number of QTL detected did not change when the number of marker loci used for QTL mapping was decreased from 220 to 126; however, a further reduction from 126 to 56 caused more than 15% loss of the total QTL detected. The detection of putative minor QTL by removing the masking effects of major QTL was explored.     

Model selection for quantitative trait loci mapping in a full-sib family

Statistical methods for mapping quantitative trait loci (QTLs) in full-sib forest trees, in which the number of alleles and linkage phase can vary from locus to locus, are still not well established. Previous studies assumed that the QTL segregation pattern was fixed throughout the genome in a full-sib family, despite the fact that this pattern can vary among regions of the genome. In this paper, we propose a method for selecting the appropriate model for QTL mapping based on the segregation of different types of markers and QTLs in a full-sib family. The QTL segregation patterns were classified into three types: test cross (1:1 segregation), F₂ cross (1:2:1 segregation) and full cross (1:1:1:1 segregation). Akaike’s information criterion (AIC), the Bayesian information criterion (BIC) and the Laplace-empirical criterion (LEC) were used to select the most likely QTL segregation pattern. Simulations were used to evaluate the power of these criteria and the precision of parameter estimates. A Windows-based software was developed to run the selected QTL mapping method. A real example is presented to illustrate QTL mapping in forest trees based on an integrated linkage map with various segregation markers. The implications of this method for accurate QTL mapping in outbred species are discussed.     

Genetic analysis of RFLPs, GATA microsatellites and RAPDs in a cross between L. esculentum and L. pimpinellifolium

A population of 257 BC₁ plants was developed from a cross between an elite processing line of tomato (Lycopersicon esculentum cvM82-1-7) and the closely related wild species L. pimpinellifolium (LA1589). The population was used to construct a genetic linkage map suitable for quantitative trait locus (QTL) analysis to be conducted in different backcross generations. The map comprises 115 RFLP, 3 RAPD and 2 morphological markers that span 1279 cM of the tomato genome with an average distance between markers of 10.7 cM. This map is comparable in length to that of the highdensity RFLP map derived from a L. esculentum x L. pennellii F₂ population. The order of the markers in the two maps is also in good agreement, however there are considerable differences in the distribution of recombination along the chromosomes. The segregation of six GATA-containing loci and 47 RAPD markers was also analyzed in subsets of the population. All of the microsatellite loci and 35 (75%) of the RAPDs mapped to clusters associated with centromeric regions.     

Inheritance of restriction fragment length polymorphisms and random amplified polymorphic DNAs in coastal Douglas-fir

A total of 225 new genetic loci [151 restriction fragment length polymorphisms (RFLP) and 74 random amplified polymorphic DNAs (RAPD)] in coastal Douglas-fir [Pseudotsuga menziesii (Mirb.) Franco var. menziesii] have been identified using a three-generation outbred pedigree. The Mendelian inheritance of 16 RFLP loci and 29 RAPD loci was demonstrated based on single-locus segregation in a sample of F₂ progeny. One RFLP locus, PtIFG2025, showed segregation distortion. Probe pPtIFG2025 is a loblolly pine cDNA probe encoding for rbcS. The 16 RFLP loci and 23 allozyme loci were also assayed in a sample of 16 Douglas-fir seed-orchard clones. Allelism was determined at 11 of the 16 RFLP loci. RFLPs were able to detect slightly more variation (4.0 alleles per locus) than allozymes (3.1 alleles per locus). The inheritance of an additional 80 RAPD loci was determined based on haploid segregation analysis of megagametophytes from parent tree 013-1. Once 200–300 markers are identified and placed on a genetic map, quantitative trait loci affecting bud phenology will be mapped.     

RFLP mapping of the sugary enhancer1 gene in maize

RFLP marker data from an F₂₃ population derived from a cross between a sugary1 (su1) and a sugary enhancer1 (su1, sel) inbred were used to construct a genetic linkage map of maize. This map includes 93 segregating marker loci distributed throughout the maize genome, providing a saturated linkage map that is suitable for linkage analysis with quantitative trait loci (QTL). This population, which has been immortalized in the form of sibbed F₂₃ families, was derived from each of the 214 F₂ plants and along with probe data are available to the scientific community. QTL analysis for kernel sucrose (the primary form of sugar) concentration at 20 days after pollination (DAP) uncovered the segregation of seven major QTL influencing sucrose concentration; a locus linked to umc36a described the greatest proportion of the variation (24.7%). Since maltose concentration has previously been reported to be associated with the se1 phenotype, an analysis of probe associations with maltose concentration at 40 DAP was also conducted. The highly significant association of umc36a with maltose and sucrose concentrations provided evidence that this probe is linked to se1. Phenotypic evaluation for the se1 genotype in each F₂₃ family enabled us to map the gene 12.1 cM distal to umc36a. In contrast to previous work where se1 was reported to be located on chromosome four, our data strongly suggest that the sugary enhancer1 locus maps on the the distal portion of the long arm of chromosome 2 in the maize genome.     

Precise mapping of a locus affecting grain protein content in durum wheat

Grain protein content (GPC) is an important factor in pasta and breadmaking quality, and in human nutrition. It is also an important trait for wheat growers because premium prices are frequently paid for wheat with high GPC. A promising source for alleles to increase GPC was detected on chromosome 6B of Triticum turgidum var. dicoccoides accession FA-15-3 (DIC). Two previous quantitative trait locus (QTL) studies found that the positive effect of DIC-6B was associated to a single locus located between the centromere and the Nor-B2 locus on the short arm of chromosome 6B. Microsatellite markers Xgwm508 and Xgwm193 flanking the QTL region were used in this study to develop 20 new homozygous recombinant substitution lines (RSLs) with crossovers between these markers. These 20 RSLs, plus nine RSLs developed in previous studies were characterized with four new RFLP markers located within this chromosome segment. Grain protein content was determined in three field experiments organized as randomized complete block designs with ten replications each. The QTL peaks for protein content were located in the central region of a 2.7-cM interval between RFLP markers Xcdo365 and Xucw67 in the three experiments. Statistical analyses showed that almost all lines could be classified unequivocally within low- and high- protein groups, facilitating the mapping of this trait as a single Mendelian locus designated Gpc-6B1. The Gpc-6B1 locus was mapped 1.5-cM proximal to Xcdo365 and 1.2-cM distal to Xucw67. These new markers can be used to reduce the size of the DIC chromosome segment selected in marker-assisted selection programs. Markers Nor-B2 and Xucw66 flanking the previous two markers can be used to select against the DIC segment and reduce the linkage drag during the transfer of Gpc-6B1 into commercial bread and pasta wheat varieties. The precise mapping of the high GPC gene, the high frequency of recombinants recovered in the targeted region, and the recent development of a tetraploid BAC library including the Gpc-6B1 DIC allele are the first steps towards the map-based cloning of this gene.Communicated by J. Dvorak     

Use of Random Amplified Polymorphic DNA Markers for Mapping the Chickpea Genome

Three interspecific crosses were developed using Cicer arietinum (ICC 4918) as the female parent and wild Cicer species [C. reticulatum - JM 2100, JM 2106 and C. echinospermum - ICCW 44] as the male parent. Cicer arietinum (ICC 4918) × C. reticulatum (JM 2100) cross produced the largest number of F₂ plants and was chosen for linkage mapping using Random Amplified Polymorphic DNA (RAPD) primers. A partial linkage map was constructed based upon the segregation of 36 RAPD markers obtained by amplification using 35 primers. The linkage map consists of two linkage groups with 17 linked markers covering a total of 464.9 cM. Analyses also revealed association of three morphological traits with linked RAPD markers. Out of seven morphological traits tested for association with linked markers in the segregating plants, four Quantitative trait loci (QTL) were detected for the trait leaf length and three QTLs each for the traits leaf width and erect plant habit.     

A major locus for submergence tolerance mapped on rice chromosome 9

Submergence stress is a widespread problem in rice-growing environments where drainage is impeded. A few cultivars can tolerate more than 10 days of submergence, but the genes conferring this tolerance have not been identified. We used randon-amplified polymorphic DNA (RAPD) and restriction fragment length polymorphism (RFLP) markers to map submergence tolerance in 169 F₂ plants and the resulting F₃ families of a cross between a tolerant indica rice line, IR40931-26, and a susceptible japonica line, PI543851. IR40931-26 inherited strong submergence tolerance from the unimproved cultivar FR13A. Eight-day old F₃ seedlings were submerged for 14–16 days in 55-cm deep tanks, and tolerance was scored after 7 days recovery on a scale of 1 (tolerant) to 9 (susceptible). The tolerant and susceptible parents scored 1.5 and 8.4, respectively, and the F₃ means ranged from 1.6 to 8.9. Two bulks were formed with DNA from F₂ plants corresponding to the nine most tolerant and the nine most susceptible F₃ families. Of 624 RAPD primers used to screen the bulks, five produced bands associated with either tolerance or susceptibility. These markers were mapped to a region of chromosome 9 by linkage to RFLP markers. A submergence tolerance quantitative trait locus (QTL), here designatedSub1, was located ca. 4 cM from the RFLP marker C1232 and accounted for 69% of the phenotypic variance for the trait.     

Quantitative Trait Loci Analyses for Meristic Traits in Oncorhynchus mykiss

Meristic trait variation among species and populations has long been used as the basis for identification and classification of fishes. Within Oncorhynchus mykiss, there is considerable variation in meristic characters such as numbers of vertebrae, lateral line scales, fin rays, gill rakers, and pyloric caeca. In our laboratory the Oregon State University (OSU) rainbow trout and the Clearwater River (CW) steelhead trout clonal lines, produced by androgenesis, exhibit significant differences in values for meristic traits, making quantitative trait locus (QTL) analysis of these meristic characters possible. Our objective was to determine the number, location, and effects of QTL associated with meristic characters in order to test two hypotheses: (1) that QTL for different meristic traits co-localize to the same linkage group and (2) that meristic trait QTL co-localize to the same linkage group as a previously identified development rate QTL. Doubled haploid individuals, produced by androgenesis from sperm from an F₁ hybrid between the OSU and CW lines, were used to evaluate the joint segregation of each meristic phenotype and Amplified Fragment Length Polymorphic marker genotypes. Composite interval mapping revealed QTL for six of the seven traits analyzed. One QTL each for scales above the lateral line and for gill rakers co-localized to the same position. Only one QTL for scales above the lateral line co-localized to the same region as that for the development rate QTL, but a greater map resolution is necessary to determine if these loci are truly the same. We failed to detect pleiotropy for most meristic trait QTL. Our results suggest that different major loci are associated with variation in each meristic character and that the expression of these loci may be influenced by maternal and external environmental factors.     

Construction of intraspecific linkage maps, detection of a chromosome inversion, and mapping of QTL for constitutive root aerenchyma formation in the teosinte Zea nicaraguensis

The teosinte Zea nicaraguensis, a wild relative of maize, possesses a flooding tolerance-related trait: the formation of constitutive root aerenchyma under drained (non-flooded) soil conditions. A previous study suggested that the degree of constitutive aerenchyma formation varies within Z. nicaraguensis. The objectives of this study were to construct linkage maps, to determine the marker order in a region of chromosome 4 in which recombination between maize and Z. nicaraguensis is suppressed, and to identify quantitative trait loci (QTL) controlling constitutive root aerenchyma formation in two segregating populations of Z. nicaraguensis. A total of 236 simple sequence repeat (SSR) markers were screened for polymorphism in an S1 population of Z. nicaraguensis. Seventy-one polymorphic SSR markers were assigned to 10 chromosomes, and a linkage map was constructed covering 793.5 cM. In the S1 map, a paracentric inversion was detected on the long arm of chromosome 4; this rearrangement was confirmed in an S1 linkage map of a different Z. nicaraguensis accession. Composite interval mapping analysis in 96 S1 plants revealed QTL for aerenchyma formation on chromosomes 1 (bins 1.06–1.07) and 7 (bin 7.01), explaining 17 and 12% of the total phenotypic variance, respectively. The QTL on chromosome 1 was verified by using 156 S2 plants. Near-isogenic lines exhibiting the presence or absence of the aerenchyma QTL have been developed that should be useful for genetic and physiological analyses of root aerenchyma formation.     

QTL analysis of drought-related traits and grain yield in relation to genetic variation for leaf abscisic acid concentration in field-grown maize

Abscisic acid (ABA) concentration is a quantitatively inherited trait which plays a pivotal role in the response of plants to drought stress. A recent study identified 17 quantitative trait loci (QTLs) controlling bulk-leaf ABA concentration (L-ABA) in a maize (Zea mays L.) population of 80 F4 random families tested for two years under droughted field conditions. Sixteen of the QTL regions influencing L-ABA also harboured QTLs for one or more of the following traits: stomatal conductance, a drought sensitivity index, leaf temperature, leaf relative water content, anthesis-silking interval, and grain yield. The analysis of the effects of each QTL region on the investigated traits indicated that L-ABA mainly represented an indicator of the level of drought stress experienced by the plant at the time of sampling because an increase in L-ABA was most commonly associated with a decrease in both stomatal conductance and grain yield as well as an increase in leaf temperature. Opposite results were observed at one QTL region on chromosome 7 near the RFLP locus asg8. A model is presented to interpret these contrasting results in terms of pleiotropic effects.Key words: Abscisic acid, ABA, drought stress, quantitative trait locus (QTL), molecular markers, Zea mays.      

Abnormal macrosporogenesis in five alfalfa (Medicago sativa) mutants producing 4n pollen

Summary An analysis of micro- and macrosporogenesis in five diploid alfalfa mutants was carried out using a stain-clearing technique. All plants produced tetranucleated microspores and jumbo pollen due to the complete failure of the postmeiotic cytokinesis as well as bi- and trinucleated macrospores. The latter was due to the absence of cytokinesis after the first and second meiotic division of macrosporogenesis. Only one out of the five clones analyzed formed tetranucleated macrospores as a consequence of the total lack of cytokinesis after both meiotic divisions. The fusion of nuclei within binucleated macrospores resulted in 2n macrospores of the SDR type, recognizable on the basis of nucleolus dimension, confirming the ability of jumbo pollen (jp) mutants to produce 2n eggs at a high frequency. Nuclear fusion was also observed within tri- and tetranucleated macrospores. Although having the same genetic background, the five clones showed significant variability in the expression of abnormal cytokinesis during macrosporogenesis.Research supported by National Research Council of Italy, special project RAISA, sub-project no. 2, paper no. 527     

Modeling segregation distortion for viability selection I. Reconstruction of linkage maps with distorted markers

Molecular markers have been widely used to map quantitative trait loci (QTL). The QTL mapping partly relies on accurate linkage maps. The non-Mendelian segregation of markers, which affects not only the estimation of genetic distance between two markers but also the order of markers on a same linkage group, is usually observed in QTL analysis. However, these distorted markers are often ignored in the real data analysis of QTL mapping so that some important information may be lost. In this paper, we developed a multipoint approach via Hidden Markov chain model to reconstruct the linkage maps given a specified gene order while simultaneously making use of distorted, dominant and missing markers in an F₂ population. The new method was compared with the methods in the MapManager and Mapmaker programs, respectively, and verified by a series of Monte Carlo simulation experiments along with a working example. Results showed that the adjusted linkage maps can be used for further QTL or segregation distortion locus (SDL) analysis unless there are strong evidences to prove that all markers show normal Mendelian segregation.     

Genetic mapping of <Emphasis Type="Italic">Eef1</Emphasis>, a major effect QTL for early flowering in <Emphasis Type="Italic">Eucalyptus grandis</Emphasis>

An early flowering mutant plant of Eucalyptus grandis with normal vegetative growth was found in a nursery in northern Brazil. This mutant plant flowers at approximately 90 days from germination. A cross between a wild-type (normal flowering) tree and the mutant was carried out, generating a progeny of 88 individuals where early flowering segregated in an approximate 1:1 ratio. A genome scan with 100 microsatellite markers distributed across the genome was carried out using bulk segregant analysis (BSA) on two contrasting bulks of 15 plants each. Linkages (LOD>3.0) with a major effect early flowering quantitative trait locus (QTL) were detected and confirmed by a full scale cosegregation analysis for markers EMBRA27, EMBRA60, EMBRA164, EMBRA158, EMBRA91, and EMBRA65. A localized linkage map involving the six loci and the early flowering QTL named Eucalyptus early flowering 1 (Eef1) was constructed belonging to linkage group #2 in the existing microsatellite reference map. The Eef1 locus was mapped between markers EMBRA27 and EMBRA164, with distances of 21.8 and 6.4 cM, respectively. In introgression experiments, these two markers could be successfully used with an expected precision of 98% to select plants carrying the Eef1 mutant allele, assuming no recombination interference in the genomic segment. Early flowering could be a very useful trait both in breeding as well as experimental genetics of Eucalyptus.     

GENETIC MAPPING OF THE LAMINARIA JAPONICA (LAMINARALES,PHAEOPHYTA) USING AMPLIFIED FRAGMENT LENGTH POLYMORPHISM MARKERS1

To establish a molecular‐marker‐assisted system of breeding and genetic study for Laminaria japonica Aresch., amplified fragment length polymorphism (AFLP) was used to construct a genetic linkage map of L. japonica featuring 230 progeny of F₂ cross population. Eighteen primer combinations produced 370 polymorphic loci and 215 polymorphic loci segregated in a 3:1 Mendelian segregation ratio (P ≤ 0.05). Of the 215 segregated loci, 142 were ordered into 27 linkage groups. The length of the linkage groups ranged from 6.7 to 90.3 centimorgans (cM) with an average length of 49.6 cM, and the total length was 1,085.8 cM, which covered 68.4% of the estimated 1,586.9 cM genome. The number of mapped markers on each linkage group ranged from 2 to 12, averaging 5.3 markers per group. The average density of the markers was 1 per 9.4 cM. Based on the marker density and the resolution of the map, the constructed linkage map can satisfy the need for quantitative trait locus (QTL) location and molecular‐marker‐assisted breeding for Laminaria.     

Quantitative trait loci for a neurocranium deformity,lack of operculum,in gilthead seabream (Sparus aurata L.)

Lack of operculum, a neurocranial deformity, is the most common external abnormality to be found among industrially produced gilthead seabream (Sparus aurata L.), and this entails significant financial losses. This study conducts, for the first time in this species, a quantitative trait loci (QTL) analysis of the lack of operculum. A total of 142 individuals from a paternal half‐sibling family (six full‐sibling families) were selected for QTL mapping. They had previously shown a highly significant association with the prevalence of lack of operculum in a segregation analysis. All the fish were genotyped for 106 microsatellite markers using a set of multiplex PCRs (ReMsa1–ReMsa13). A linear regression methodology was used for the QTL analysis. Four QTL were detected for this deformity, two of which (QTLOP1 and QTLOP2) were significant. They were located at LG (linkage group) nine and LG10 respectively. Both QTL showed a large effect (about 27%), and furthermore, the association between lack of operculum and sire allelic segregation observed was statistically significant in the QTLOP1 analysis. These results represent a significant step towards including marker‐assisted selection for this deformity in genetic breeding programmes to reduce the incidence of the deformity in the species.