A simple and rapid procedure for sequencing long (40-kb) DNA fragments

A simple procedure has been developed for sequencing long (40-kb) DNA fragments by the dideoxy method. The fragment is cloned in the sequencing cosmid pAA113X by in vitro packaging, and subdivided by a series of overlapping IS1-promoted deletions. The deletions are isolated by positive selection for galactose resistance. Plasmids from several thousand galactose-resistant colonies are fractionated on an agarose gel, and DNA from each fraction is restricted with enzymes (such as SphI and SalI) to shorten each deletion from the opposite end. As a result, a series of short overlapping segments, spread across the entire length of the fragment, are fused to IS1. The plasmids are extracted by a rapid method, arranged according to size, and used for supercoil sequencing with an IS1 primer. Sequences of IS1-promoted deletions contain extensive overlaps that are connected further by restriction enzyme-generated deletions to give the complete 40-kb sequence.     

Use of transposon-promoted deletions in DNA sequence analysis

The usefulness of the dideoxy method for DNA sequencing can be greatly extended by the use of transposon-generated deletions. These deletions have the unique property of extending from a fixed nucleotide at the transposon terminus to various sites outside it. A plasmid (pAA3.7) carrying Tn9, which allows positive selection of such deletions as galactose-resistant colonies of Escherichia coli, is described. A cloned gene can thus be subdivided into a series of overlapping sequences, all of which are fused to a common sequence at the transposon terminus. Restriction fragments carrying the segments fused by deletions are cloned in M13, and sequenced using a primer complementary to the Tn9 terminus. Complete nucleotide sequence of the gene is assembled from sequence overlaps found in deletions with end-points approximately 350 base-pairs apart. The method is rapid, requires minimal in vitro manipulation, and is free from redundant information normally produced in shotgun sequencing.     

A rapid procedure for DNA sequencing using transposon-promoted deletions in Escherichia coli

A simple procedure has been developed for sequencing long fragments of DNA. The fragment (which can be several kb in length) is cloned in pAA3.7X, and subdivided into many overlapping segments by Tn9-promoted deletions. The deletions are isolated by positive selection for galactose resistance. A rapid plasmid preparation from several hundred galactose-resistant colonies is fractionated by agarose gel electrophoresis to pick a series of deletions terminating at approx. 200-bp intervals across the entire length of the fragment. Selected plasmids are purified by rapid alkaline extraction, and used directly for supercoil sequencing with a primer derived from IS1. Sequences of adjacent deletions contain overlaps which are used to connect individual sequences to give the complete sequence.     

Alternative dideoxy sequencing of double-stranded DNA by cyclic reactions using Taq polymerase.

The polymerase chain reaction (PCR) is a technique to amplify a specific DNA sequence millions of times. The thermostable enzyme Taq polymerase allows this procedure to take place under conditions of high specificity and automatization. By combining the techniques of PCR and dideoxy sequencing, it is possible to perform DNA sequencing independently of their structures. The cyclic sequencing reaction is carried out in the presence of an excess amount of sequencing primer and a radioactive nucleotide ([alpha-35S]dATP) using a DNA thermal cycler. Different reaction conditions were investigated and optimized including nucleotide ratios in each termination mix, primer/template ratios, amount of a radioactive nucleotide, and the program of the reaction. This method allows the detection of single base substitutions in heterozygous alleles, and the detection of homozygous deletions. A new RFLP of the human porphobilinogen deaminase (PBGD) gene was identified using this technique. This RFLP is created by one base difference (cytosine or adenine) that changes the restriction site for Apa LI. The alternative sequencing method described in this study is a simple and time-saving procedure that can also be used for large sequencing projects.     

Rapid and reliable dideoxy sequencing of double-stranded DNA

We report a simple and reliable protocol for nucleotide sequencing using the Sanger dideoxy technique on linearized double-stranded DNA molecules with specific oligonucleotide primers. The method is demonstrated for restriction fragments cloned into the plasmid vectors pSP64 and pSP65 using two vector-specific primers, the M 13 reverse primer and a new SP6 primer, flanking the multiple cloning site. Template DNA may be prepared by a rapid alkaline lysis procedure. Mild linearization conditions with the appropriate restriction endonuclease avoid the appearance of artifact bands.     

Preparation of single-stranded deoxyribonucleic acid probes using an immobilized template

A new method for the easy preparation of specific single-stranded DNA fragments is presented. Recombinant M13 DNA containing the strand complementary to the sequence of interest is made partially double-stranded by elongating a conventional M13 sequencing primer. Following linearization by enzymatic digestion downstream from the insert (relative to priming site), this DNA is coupled to diazotized paper through its single-stranded (vector) portion. Subsequent denaturation of the double-stranded region generates an immobilized template strand. Successive runs of primed syntheses of the (desired) complementary strand can be realized using the same template. The copies are easily isolated by release upon denaturation. DNA probes prepared by this method have proven to be valuable tools for gene analysis.     

A vector for sequencing long (40-kb) DNA fragments

An improved vector (pAA113M) has been constructed for sequencing long (40-kb) DNA fragments. The DNA fragment is cloned in the tet gene of the cosmid and subdivided into numerous overlapping segments by IS1-promoted deletions. Plasmids bearing these deletions are fractionated by gel electrophoresis, and shortened further from the opposite end by treatment with specific restriction endonucleases. Thus, a series of short overlapping segments, spread across the entire length of the fragment, become fused to IS1. Each segment can then be sequenced by the dideoxy method using an IS1 primer. The plasmids can replicate either from their normal origin or, in the presence of a filamentous helper phage, from the M13 origin. Hence, each segment can be sequenced as either double-stranded DNA or single-stranded DNA. Sequences of IS1-promoted and restriction enzyme-generated deletions contain overlaps that can be used to assemble the complete 40-kb sequence.     

Resolution of sequencing ambiguities: a universal FokI adapter permits Maxam-Gilbert re-sequencing of single-stranded phagemid DNA

We propose a method to resolve ambiguities encountered when single-stranded (ss) phagemid DNA templates are sequenced by the dideoxy method. A single oligodeoxyribonucleotide (oligo) is synthesized with the following features: (i) the 20 nucleotides (nt) at the 5'-end form a double-stranded hairpin containing a FokI restriction site, exactly as previously described by Podhajska and Szybalski [Gene 40 (1985) 175-182]; (ii) the 23 nt at the 3'-end hybridize to the (+)strand of ss phagemid DNA in the region complementary to the M13 universal sequencing primer. In a simple one-tube set of reactions, ss phagemid DNA is annealed to this oligo, cleaved by FokI at a unique site outside the vector multiple cloning site and then labelled at this unique site by Klenow polymerase and [alpha-32P]dCTP. These reactions provide a convenient route by which Maxam-Gilbert chemical degradation sequencing methods can be used to resolve ambiguities encountered in the dideoxy-sequencing of a unidirectional deletion series already prepared in popular phagemid vectors. A single oligo allows labelling of all members of a deletion series. A second universal oligo allows the same set of reactions to be applied to inserts cloned into (-)strand phagemids.     

Affinity generation of single-stranded DNA for dideoxy sequencing following the polymerase chain reaction

A method to rapidly generate single stranded DNA for dideoxy sequencing following the polymerase chain reaction is described. By incorporating biotin in one of the amplification primers, we are able to physically separate the two DNA strands produced in the polymerase chain reaction. After amplification, the mixture is passed through a column containing streptavidin agarose. The strand produced by the biotinylated primer is bound in this matrix. The unbiotinylated strand is eluted with 0.2 N NaOH and sequenced by the dideoxy method. This method was utilized to sequence mitochondrial DNA from crude genomic DNA and to determine the sequences of four clones containing human mitochondrial DNA as a test of its accuracy. The use of biotin-facilitated separation permitted us to amplify and sequence DNA samples in a single day.     

Rapid and reliable fluorescent cycle sequencing of double-stranded templates.

Automated DNA sequencing is an extremely valuable technique which requires very high quality DNA templates to be carried out successfully. While it has been possible to readily produce large numbers of such templates from M13 or other single-stranded vectors for several years, the sequencing of double-stranded DNA templates using the ABI 373 DNA Sequencer has had a considerably lower success rate. We describe how the combination of a new fluorescent, dideoxy sequencing method, called cycle-sequencing, coupled with modifications to template isolation procedures based on Qiagen columns, makes fluorescent sequencing of double-stranded templates a reliable procedure. From a single five milliliter culture enough DNA can be isolated (up to 20 micrograms) to do 4-8 sequencing reactions, each of which yields 400-500 bases of high quality sequence data. These procedures make the routine use of double-stranded DNA templates a viable strategy in automated DNA sequencing projects.     

Intramolecular integration within Moloney murine leukemia virus DNA

By screening a library of unintegrated, circular Moloney murine leukemia virus (M-MuLV) DNA cloned in lambda phage, we found that approximately 20% of the M-MuLV DNA inserts contained internal sequence deletions or inversions. Restriction enzyme mapping demonstrated tht the deleted segments frequently abutted a long terminal repeat (LTR) sequence, whereas the inverted segments were usually flanked by LTR sequences, suggesting that many of the variants arose as a consequence of M-MuLV DNA molecules integrating within their own DNA. Nucleotide sequencing also suggested that most of the variant inserts were generated by autointegration. One of the recombinant M-MuLV DNA inserts contained a large inverted repeat of a unique M-MuLV sequence abutting an LTR. This molecule was shown by nucleotide sequencing to have arisen by an M-MuLV DNA Molecule integrating within a second M-MuLV DNA molecule before cloning. The autointegrated M-MuLV DNA had generally lost two base pairs from the LTR sequence at each junction with target site DNA, whereas a four-base-pair direct repeat of target site DNA flanked the integrated viral DNA. Nucleotide sequencing of preintegration target site DNA showed that this four-base-pair direct repeat was present only once before integration and was thus reiterated by the integration event. The results obtained from the autointegrated clones were supported by nucleotide sequencing of the host-virus junction of two cloned M-MuLV integrated proviruses obtained from infected rat cells. Detailed analysis of the different unique target site sequences revealed no obvious common features.     

Fluorescence-based DHPLC for allelic quantification by single-nucleotide primer extension

We have investigated the possibility of determining quantitatively the alleles of binary DNA polymorphisms by single-nucleotide primer extension (SNuPE) and fluorescence-based DHPLC. Using a polymorphism of interest to our group, ROX-labeled dideoxy CTP (ROX-ddCTP) was incorporated at the 3' end of the primer annealed to the template adjacent to the polymorphic site. The primer extension product was then resolved from the unincorporated dye terminator by ion-pair reversed-phase liquid chromatography. The signal intensity of incorporated ROX-ddCTP correlated well over one order of magnitude with the relative amount of the C-allele present in the genomic DNA template. We conclude that SNuPE, when combined with fluorescence-based DHPLC, can accurately determine the relative molar proportion of one allele in total DNA.     

Construction of an M13 histidine-transducing phage: a single-stranded cloning vehicle with one EcoRI site.

In order to create a ready source of single-stranded DNA for DNA sequence determination by the dideoxy chain-termination method, the promoter-proximal part of the histidine operon, the hisOGD region of Salmonella typhimurium, was cloned onto the single-stranded phage M13. Both orientations of the his DNA were cloned to supply DNA template for sequencing of each strand. Insertion was achieved at an HaeIII site in the intergenic region (IR) of M13, and a single EcoRI site was purposely regenerated at one boundary of the his DNA insert. Infected colonies, not plaques, were selected using the hisD gene as a selective marker. The single RI site and the hisD marker for auxotrophic selection represent improvements on the wild type M13 as a single-stranded vector for cloning other DNA.     

Octamer-primed sequencing technology: development of primer identification software

Octamer sequencing technology (OST) is a primer-directed sequencing strategy in which an individual octamer primer is selected from a pre-synthesized octamer primer library and used to sequence a DNA fragment. However, selecting candidate primers from such a library is time consuming and can be a bottleneck in the sequencing process. To accelerate the sequencing process and to obtain high quality sequencing data, a computer program, electronic OST or eOST, was developed to automatically identify candidate primers from an octamer primer library. eOST integrates the base calling software PHRED to provide a quality assessment for target sequences and identifies potential primer binding sites located within a high quality target region. To increase the sequencing success rate, eOST includes a simple dynamic folding algorithm to automatically calculate the free energy and predict the secondary structure within the template in the vicinity of the octamer-binding site. Several parameters were found to be important, including base quality threshold, the window size of the template sequence segment, and the threshold ΔG value. OST, coupled with the eOST software, can be used to sequence short DNA fragments or in the finishing assembly stage of large-scale sequencing of genomic DNA.     

Synthesis of a fixed-length single-stranded DNA probe by blocking primer extension in bacteriophage M13

A simple and efficient technique has been developed for preparing radiolabeled single-stranded (ss) probes of determined length and high specific radioactivity. The human beta-globin gene intervening segment II (IVSII) fragment (0.9-kb) was inserted between the EcoRI and BamHI sites of M13mp11 and used as a template for ss probe synthesis. The M13 hybridization probe primer (M13 Hpp) was annealed to the recombinant M13mp11-beta IVSII template DNA. This M13 Hpp was next blocked by the enzymatic addition of a dideoxy adenosine monophosphate (ddAMP) residue to the 3' OH group of the primer. The M13 universal sequencing primer was then annealed and used to prepare an ss copy of the beta-IVSII fragment. Synthesis of the ss fragment was terminated by the presence of the dd-blocked M13 Hpp yielding a specific 0.9-kb ss beta-IVSII probe.