Quantitative trait loci for honey bee stinging behavior and body size.

A study was conducted to identify quantitative trait loci (QTLs) that affect colony-level stinging behavior and individual body size of honey bees. An F1 queen was produced from a cross between a queen of European origin and a drone descended from an African subspecies. Haploid drones from the hybrid queen were individually backcrossed to sister European queens to produce 172 colonies with backcross workers that were evaluated for tendency to sting. Random amplified polymorphic DNA markers were scored from the haploid drone fathers of these colonies. Wings of workers and drones were used as a measure of body size because Africanized bees in the Americas are smaller than European bees. Standard interval mapping and multiple QTL models were used to analyze data. One possible QTL was identified with a significant effect on tendency to sting (LOD 3.57). Four other suggestive QTLs were also observed (about LOD 1.5). Possible QTLs also were identified that affect body size and were unlinked to defensive-behavior QTLs. Two of these were significant (LOD 3.54 and 5.15).     

Quantitative trait loci for steady-state platelet count in mice

Platelet count in humans is a strongly genetically regulated trait, with approximately 85% of the interindividual variance in platelet numbers attributable to genetic factors. Inbred mouse strains also have strain-specific platelet count ranges. As part of a project to identify novel factors that regulate platelet count, we identified two inbred mouse strains, CBA/CaH and QSi5, with substantial differences in platelet count (mean values of 581 vs. 1062 × 10⁹/L). An F₂ intercross resource of 1126 animals was bred from these two parental strains for a genomewide scan for quantitative trait loci (QTL) for platelet count. QTL were identified on MMU1 (LOD 6.8, p < 0.0005) and MMU11 (LOD 11.2, p < 0.0005) by selectively genotyping animals from the extremes of the F₂ platelet count distribution. Three other QTL of suggestive statistical significance were also detected on MMU7, 13, and 17. It is noteworthy that no QTL were detected in the vicinity of the genes encoding thrombopoietin (Thpo), and its receptor (c-Mpl), both known to influence platelet production. Comparison of gene expression levels between the parental mouse strains by microarrays also showed little difference in the mRNA levels of these known candidate genes. These results represent the first published use of a genetic linkage-based approach in a mouse model toward the identification of genetic factors that regulate platelet count.     

Quantitative trait loci for physical activity traits in mice.

The genomic locations and identities of the genes that regulate voluntary physical activity are presently unknown. The purpose of this study was to search for quantitative trait loci (QTL) that are linked with daily mouse running wheel distance, duration, and speed of exercise. F(2) animals (n = 310) derived from high active C57L/J and low active C3H/HeJ inbred strains were phenotyped for 21 days. After phenotyping, genotyping with a fully informative single-nucleotide polymorphism panel with an average intermarker interval of 13.7 cM was used. On all three activity indexes, sex and strain were significant factors, with the F(2) animals similar to the high active C57L/J mice in both daily exercise distance and duration of exercise. In the F(2) cohort, female mice ran significantly farther, longer, and faster than male mice. QTL analysis revealed no sex-specific QTL but at the 5% experimentwise significance level did identify one QTL for duration, one QTL for distance, and two QTL for speed. The QTL for duration (DUR13.1) and distance (DIST13.1) colocalized with the QTL for speed (SPD13.1). Each of these QTL accounted for approximately 6% of the phenotypic variance, whereas SPD9.1 (chromosome 9, 7 cM) accounted for 11.3% of the phenotypic variation. DUR13.1, DIST13.1, SPD13.1, and SPD9.1 were subsequently replicated by haplotype association mapping. The results of this study suggest a genetic basis of voluntary activity in mice and provide a foundation for future candidate gene studies.     

Quantitative trait loci for maternal performance for offspring survival in mice

Maternal performance refers to the effect that the environment provided by mothers has on their offspring's phenotypes, such as offspring survival and growth. Variations in maternal behavior and physiology are responsible for variations in maternal performance, which in turn affects offspring survival. In our study we found females that failed to nurture their offspring and showed abnormal maternal behaviors. The genetic architecture of maternal performance for offspring survival was investigated in 241 females of an F(2) intercross of the SM/J and LG/J inbred mouse strains. Using interval-mapping methods we found two quantitative trait loci (QTL) affecting maternal performance at D2Mit17 + 6 cM and D7Mit21 + 2 cM on chromosomes 2 and 7, respectively. In a two-way genome-wide epistasis scan we found 15 epistatic interactions involving 23 QTL distributed across all chromosomes except 12, 16, and 17. These loci form several small sets of interacting QTL, suggesting a complex set of mechanisms operating to determine maternal performance for offspring survival. Taken all together and correcting for the large number of significant factors, QTL and their interactions explain almost 35% of the phenotypic variation for maternal performance for offspring survival in this cross. This study allowed the identification of many possible candidate genes, as well as the relative size of gene effects and patterns of gene action affecting maternal performance in mice. Detailed behavior observation of mothers from later generations suggests that offspring survival in the first week is related to maternal success in building nests, grooming their pups, providing milk, and/or manifesting aggressive behavior against intruders.     

Quantitative trait loci affecting prion incubation time in mice

Although the gene encoding prion protein (PrP) is the major determinant of susceptibility to prion disease, other genes also affect prion incubation time in mice and may be involved in prion replication. Scrapie incubation time was analyzed as a quantitative trait using crosses between SJL/J and CAST/Ei mice; these mouse strains encode identical PrP molecules but have different incubation periods. Our analysis revealed loci on Chromosomes 9 and 11 that affect prion susceptibility.     

Quantitative trait loci affecting components of wing shape in Drosophila melanogaster

Two composite multiple regression-interval mapping analyses were performed to identify candidate quantitative trait loci (QTL) affecting components of wing shape in Drosophila melanogaster defined by eight relative warp-based measures. A recombinant inbred line design was used to map QTL for the shape of two intervein regions in the anterior compartment of the wing, using a high resolution map of retrotransposon insertion sites between Oregon-R and Russian 2b. A total of 35 QTL representing up to 23 different loci were identified, many of which are located near components of the epidermal growth factor-Ras signal transduction pathway that regulates vein vs. intervein decision making and vein placement. Over one-half of the loci were detected in both sexes, and just under one-half were detected at two different growth temperatures. Different loci were found to affect aspects of shape in each intervein region, confirming that the shape of the whole wing should be regarded as a compound trait composed of several developmental units. In addition, a reciprocal backcross design was used to map QTL affecting shape in the posterior compartment of the wings of 831 flies, using a molecular map of 16 allele-specific oligohybridization single nucleotide polymorphism (SNP) markers between two divergent inbred lines. A total of 13 QTL were detected and shown to have generally additive effects on separable components of shape, in both sexes. By contrast, 8 QTL that affected wing size in these backcrosses were nearly dominant in their effects. The results confirm at the genetic level that wing shape is regulated independent of wing size and set up the hypothesis that wing shape is regulated in part through the regulation of the length and positioning of wing veins, involving quantitative regulation of the activity of secreted growth factors.     

Quantitative trait loci determining autogeny and body size in the Asian tiger mosquito (Aedes albopictus)

The majority of mosquito species require a blood meal to stimulate vitellogenesis and subsequent oviposition (anautogeny), but some autogenous individuals complete their first ovarian cycle without a blood meal. Autogeny may be facultative or obligatory. In this study, we selected for an autogenous strain in the Asian tiger mosquito Aedes albopictus and examined an F(1) intercross population for quantitative trait loci (QTL) determining the autogeny trait as well as wing length as a proxy for body size. Using composite interval mapping, we identified four QTL for each trait and observed considerable overlap in genome positions between each QTL for autogeny (follicle size) and wing length. Most QTL were minor in magnitude, individually explaining <10% of the phenotypic variation. Alleles from the autogenous parent generally showed a dominance or overdominance effect on both phenotypes. Strong genetic and phenotypic correlations indicate that autogeny and wing length are determined by up to four clusters of tightly linked genes or the potential pleiotropic effects of single genes. Although females from the autogenous strain produced approximately fivefold more eggs following a blood meal than through autogeny, we suggest that the maintenance of alleles for autogeny in natural populations is likely due to balancing selection. Autogeny should be favored under conditions of limited host availability for blood feeding or increased defensive behavior by the host and adequate larval nutrition. Correlation between autogeny and body size may reflect an increased ability for larger females to accumulate sufficient nutrient reserves to support oogenesis without the requirement for a blood meal.     

Quantitative trait loci for growth and body size in the nine‐spined stickleback Pungitius pungitius L.

Body size is an ecologically important trait shown to be genetically variable both within and among different animal populations as revealed by quantitative genetic studies. However, few studies have looked into underlying genetic architecture of body size variability in the wild using genetic mapping methods. With the aid of quantitative trait loci (QTL) analyses based on 226 microsatellite markers, we mapped body size and growth rate traits in the nine‐spined stickleback (Pungitius pungitius) using an F₂‐intercross (n = 283 offspring) between size‐divergent populations. In total, 17 QTL locations were detected. The proportion of phenotypic variation explained by individual body size‐related QTL ranged from 3% to 12% and those related to growth parameters and increments from 3% to 10%. Several of the detected QTL affected either early or late growth. These results provide a solid starting point for more in depth investigations of structure and function of genomic regions involved in determination of body size in this popular model of ecological and evolutionary research.     

Quantitative trait loci in Drosophila

Phenotypic variation for quantitative traits results from the simultaneous segregation of alleles at multiple quantitative trait loci. Understanding the genetic architecture of quantitative traits begins with mapping quantitative trait loci to broad genomic regions and ends with the molecular definition of quantitative trait loci alleles. This has been accomplished for some quantitative trait loci in Drosophila. Drosophila quantitative trait loci have sex-, environment- and genotype-specific effects, and are often associated with molecular polymorphisms in non-coding regions of candidate genes. These observations offer valuable lessons to those seeking to understand quantitative traits in other organisms, including humans.     

Quantitative trait loci for yield components in oil palm (Elaeis guineensis Jacq.)

The development of an oil palm RFLP marker map has enabled marker-based QTL mapping studies to be undertaken. Information from 153 RFLP markers was used in combination with phenotypic data from an F₂ population to estimate the position and effects of quantitative trait loci (QTLs) for traits including yield of fruit and its components and measures of vegetative growth. The mapping population consisted of 84 palms segregating for the major gene influencing shell thickness. Marker data were analysed to produce a linkage map consisting of 22 linkage groups. The QTL mapping analysis was carried out by interval mapping and single-marker analysis for the unlinked markers; significance thresholds were generated by permutation. Using both single-marker and interval-mapping analysis significant marker associated QTL effects were found for 11 of the 13 traits analysed. The results of interval-mapping analysis of fruit weight, petiole cross section and rachis length, and ratios of shell:fruit, mesocarp:fruit and kernel:fruit indicated significant (P<0.05) QTLs at the genome-wide threshold. The putative QTLs were associated with between 8.2% and 44.0% of the phenotypic variation, with an average of 27% for the single-marker analysis and 19% for the interval-mapping analysis. The higher percentage of phenotypic variation explained in the single-marker analysis, when compared to the interval-mapping analysis, is likely to be due to the lower stringency associated with the single-marker analysis. Large dominance deviations were associated with a sizeable proportion of the putative QTLs. The ultimate objective of mapping QTLs in commercial populations is to utilise novel breeding strategies such as marker-assisted selection (MAS). The potential impact of MAS in oil palm breeding programmes is discussed. Received: 26 June 2000 / Accepted: 24 October 2000     

Quantitative trait loci for body weight in the intercross between SM/J and A/J mice.

We performed a genome-wide quantitative trait locus (QTL) analysis of body weight at 10 weeks of age in a population of 321 intercross offspring from SM/J and A/J mice, progenitor strains of SMXA recombinant inbred strains. Interval mapping revealed two significant QTLs, Bwq3 (body weight QTL3) and Bwq4, on Chromosomes (Chrs) 8 and 18 respectively, and five suggestive QTLs on Chrs 2, 6, 7, 15 and 19. Bwq3 and Bwq4 explained 6% of the phenotypic variance. The SM/J alleles at both QTLs increased body weight, though the SM/J mouse was smaller than the A/J mouse. On the other hand, four of the five suggestive QTLs detected had male-specific effects on body weight and the remainder was female-specific. These suggestive QTLs explained 5-6% of the phenotypic variance and all the SM/J alleles decreased body weight.     

Quantitative trait loci influencing low density lipoprotein particle size in African Americans

Genomic regions that influence LDL particle size in African Americans are not known. We performed family-based linkage analyses to identify genomic regions that influence LDL particle size and also exert pleiotropic effects on two closely related lipid traits, high density lipoprotein cholesterol (HDL-C) and triglycerides, in African Americans. Subjects (n = 1,318, 63.0 +/- 9.5 years, 70% women, 79% hypertensive) were ascertained through sibships with two or more individuals diagnosed with essential hypertension before age 60. LDL particle size was measured by polyacrylamide gel electrophoresis, and triglyceride levels were log-transformed to reduce skewness. Genotypes were measured at 366 microsatellite marker loci distributed across the 22 autosomes. Univariate and bivariate linkage analyses were performed using a variance components approach. LDL particle size was highly heritable (h(2) = 0.78) and significantly (P < 0.0001) genetically correlated with HDL-C (rho(G) = 0.32) and log triglycerides (rho(G) = -0.43). Significant evidence of linkage for LDL particle size was present on chromosome 19 [85.3 centimorgan (cM), log of the odds (LOD) = 3.07, P = 0.0001], and suggestive evidence of linkage was present on chromosome 12 (90.8 cM, LOD = 2.02, P = 0.0011). Bivariate linkage analyses revealed tentative evidence for a region with pleiotropic effects on LDL particle size and HDL-C on chromosome 4 (52.9 cM, LOD = 2.06, P = 0.0069). These genomic regions may contain genes that influence interindividual variation in LDL particle size and potentially coronary heart disease susceptibility in African Americans.     

Quantitative trait loci associated with maximal exercise endurance in mice.

The role of genetics in the determination of maximal exercise endurance is unclear. Six- to nine-week-old F2 mice (n = 99; 60 female, 39 male), derived from an intercross of two inbred strains that had previously been phenotyped as having high maximal exercise endurance (Balb/cJ) and low maximal exercise endurance (DBA/2J), were treadmill tested to estimate exercise endurance. Selective genotyping of the F2 cohort (n = 12 high exercise endurance; n = 12 low exercise endurance) identified a significant quantitative trait locus (QTL) on chromosome X (53.7 cM, DXMit121) in the entire cohort and a suggestive QTL on chromosome 8 (36.1 cM, D8Mit359) in the female mice. Fine mapping with the entire F2 cohort and additional informative markers confirmed and narrowed the QTLs. The chromosome 8 QTL (EE8(F)) is homologous with two suggestive human QTLs and one significant rat QTL previously linked with exercise endurance. No effect of sex (P = 0.33) or body weight (P = 0.79) on exercise endurance was found in the F2 cohort. These data indicate that genetic factors in distinct chromosomal regions may affect maximal exercise endurance in the inbred mouse. Whereas multiple genes are located in the identified QTL that could functionally affect exercise endurance, this study serves as a foundation for further investigations delineating the identity of genetic factors influencing maximum exercise endurance.     

Quantitative trait loci for aluminum resistance in wheat

Quantitative trait loci (QTL) for wheat resistance to aluminum (Al) toxicity were analyzed using simple sequence repeats (SSRs) in a population of 192 F₆ recombinant inbred lines (RILs) derived from a cross between an Al-resistant cultivar, Atlas 66 and an Al-sensitive cultivar, Chisholm. Wheat reaction to Al was measured by relative root growth and root response to hematoxylin stain in nutrient-solution culture. After screening 1,028 SSR markers for polymorphisms between the parents and bulks, we identified two QTLs for Al resistance in Atlas 66. One major QTL was mapped on chromosome 4D that co-segregated with the Al-activated malate transporter gene (ALMT1). Another minor QTL was located on chromosome 3BL. Together, these two QTLs accounted for about 57% of the phenotypic variation in hematoxylin staining score and 50% of the variation in net root growth (NRG). Expression of the minor QTL on 3BL was suppressed by the major QTL on 4DL. The two QTLs for Al resistance in Atlas 66 were also verified in an additional RIL population derived from Atlas 66/Century. Several SSR markers closely linked to the QTLs were identified and have potential to be used for marker-assisted selection (MAS) to improve Al-resistance of wheat cultivars in breeding programs.     

Quantitative trait loci for baseline erythroid traits

A substantial genetic contribution underlies variation in baseline peripheral blood counts. We performed quantitative trait locus/loci (QTL) analyses to identify chromosome (Chr) regions harboring genes influencing the baseline erythroid parameters in F₂ intercrosses between NZW/LacJ, SM/J, and C57BLKS/J inbred mice. We identified multiple significant QTL for red blood cell (RBC) count, hemoglobin (Hgb) and hematocrit (Hct) levels, mean corpuscular volume (MCV), mean corpuscular hemoglobin (MCH), and mean cell hemoglobin concentration (CHCM). We identified four RBC count QTL: Rbcq1 (Chr 1, peak LOD score at 62 cM,), Rbcq2 (Chr 4, 60 cM), Rbcq3 (Chr 11, 34 cM), and Rbcq4 (Chr 10, 60 cM). Three MCV QTL were identified: Mcvq1 (Chr 7, 30 cM), Mvcq2 (Chr 11, 6 cM), and Mcvq3 (Chr 10, 60 cM). Single significant loci for Hgb (Hgbq1, Chr 16, 32 cM), Hct (Hctq1, Chr 3, 42 cM), and MCH (Mchq1, Chr 10, 60 cM) were identified. The data support the existence of a common RBC/MCH/MCV locus on Chr 10. Two QTL for CHCM (Chcmq1, Chr 2, 48 cM; Chcmq2, Chr 9, 44 cM) and an interaction between Chcmq2 with a locus on Chr 19 were identified. These analyses emphasize the genetic complexity underlying the regulation of erythroid peripheral blood traits in normal populations and suggest that genes not previously recognized as significantly impacting normal erythropoiesis exist.     

Quantitative trait loci for growth trajectories in Populus

Growth trajectories are a biological process important to plant and animal breeding, and to evolutionary genetic studies. In this article, we report the detection of quantitative trait loci (QTLs) responsible for growth trajectories in poplars that are used as a model system for the study of forest biology. These QTLs were localized on a genetic linkage map of polymorphic markers using a statistical mapping method incorporating growth-curve models. The effects of the QTLs on growth are described as a function of age, so that age-specific changes in QTL effects can be readily projected throughout the entire growth process. The QTLs identified display increased effects on growth when trees age, yet the timing of QTL activation is earlier for stem height than diameter, which is consistent with the ecological viewpoint of canopy competition. The implications of the results for breeding and silviculture are discussed.     

Quantitative trait loci for directional but not fluctuating asymmetry of mandible characters in mice

Non-directional variation in right minus left differences in bilateral characters, referred to as fluctuating asymmetry (FA), often has been assumed to be largely or entirely environmental in origin. FA increasingly has been used as a measure of developmental stability, and its presumed environmental origin has facilitated the comparisons of populations believed to differ in their levels of stability. Directional asymmetry (DA), in which one side is consistently larger than the other, has been assumed to be at least partially heritable. Both these assumptions were tested with interval mapping techniques designed to detect any quantitative trait loci (QTLs) affecting FA or DA in 15 bilateral mandible characters in house mice resulting from a cross of the F1 between CAST/Ei (wild strain) and M16i (selected for rapid growth rate) back to M16i. For purposes of the analysis, all mandibles were triply measured and 92 microsatellite markers were scored in a total of 350 mice. No significant QTLs were found for FA, but three QTLs significantly affected DA in several characters, confirming both assumptions. The QTLs for DA were similar in location to those affecting the size of several of the mandible characters, although they accounted for an average of only 1% of the total phenotypic variation in DA.     

Quantitative trait loci affecting growth in high growth (hg) mice

A genome-wide scan was performed in order to identify Quantitative Trait Loci (QTL) associated with growth in a population segregating high growth (hg), a partially recessive mutation that enhances growth rate and body size in the mouse. A sample of 262 hg/hg mice was selected from a C57BL/6J-hg/hg× CAST/EiJ F₂ cross and typed with 79 SSLP markers distributed across the genome. Eight significant loci were identified through interval mapping. Loci on Chromosomes (Chrs) 2 and 8 affected the growth rate of F₂ mice. Loci on Chr 2 and 11 affected growth rate and carcass lean mass (protein and ash). A locus on Chr 9 modified femur length and another one in Chr 17 affected both carcass lean mass and femur length, but none of these had significant effects on growth rate. Loci on Chrs 5 and 9 modified carcass fat content. Additive effects were positive for C57BL/6J alleles, except for the two loci affecting carcass fatness. Typing of selected markers in 274 +/+ F₂ mice revealed significant interactions between hg and other growth QTL, which were detected as changes in gene action (additive or dominant) and in allele substitution effects. Knowledge about interactions between loci, especially when major genes are involved, will help in the identification of positional candidate genes and in the understanding of the complex genetic regulation of growth rate and body size in mammals. Received: 29 June 2000 / Accepted: 22 November 2000     

Mapping quantitative trait loci affecting chicken body size traits via genome scanning

Body size traits reflect the condition of body development, are always mentioned when a breed is described, and are also targets in breeding programmes. In chicken, there are several reports focused on body size traits, such as shank length, tibia length or bone traits. However, no study was carried out on chest width (CW), chest depth (CD), body slope length (BL) and head width (HW) traits. In this study, genome scans were conducted on an F₂ resource population (238 F₂ individuals from 15 full‐sib families derived from an intercross of the White Plymouth Rock with the Silkies Fowl) to identify quantitative trait loci (QTL) associated with CW, CD, BL and HW from 7 to 12 weeks of age. In total, 21 significant or suggestive QTL were found that affected four body size traits. Four QTL reached 1% genome‐wide significance level: at 297 cM on GGA3 (associated with CW at 9 weeks of age), between 155 and 184 cM on GGA1 (affecting BL traits at 9 and 10 weeks of age), at 22 cM on GGA2 (related with BL traits at 12 weeks of age) and at 36 cM on GGA1 (for HW trait at 8 weeks of age).     

Quantitative trait loci for biofortification traits in maize grain

Detecting genes that influence biofortification traits in cereal grain could help increase the concentrations of bioavailable mineral elements in crops to solve the global mineral malnutrition problem. The aims of this study were to detect the quantitative trait loci (QTLs) for phosphorus (P), iron (Fe), zinc (Zn), and magnesium (Mg) concentrations in maize grain in a mapping population, as well as QTLs for bioavailable Fe, Zn, and Mg, by precalculating their respective ratios with P. Elemental analysis of grain samples was done by coupled plasma-optical emission spectrometry in 294 F(4) lines of a biparental population taken from field trials of over 3 years. The population was mapped using sets of 121 polymorphic markers. QTL analysis revealed 32 significant QTLs detected for 7 traits, of which some were colocalized. The Additive-dominant model revealed highly significant additive effects, suggesting that biofortification traits in maize are generally controlled by numerous small-effect QTLs. Three QTLs for Fe/P, Zn/P, and Mg/P were colocalized on chromosome 3, coinciding with simple sequence repeats marker bnlg1456, which resides in close proximity to previously identified phytase genes (ZM phys1 and phys2). Thus, we recommend the ratios as bioavailability traits in biofortification research.