Life cycle greenhouse gas emissions of palm oil production by wet and dry extraction processes in Thailand

Purpose

The crude palm oil (CPO) extraction is normally done by a wet extraction process, and wastewater treatment of the wet process emits high levels of greenhouse gases (GHGs). A dry process extracts mixed palm oil (MPO) from palm fruit without using water and has no GHG emissions from wastewater treatment. This work is aimed at determining the GHG emissions of a dry process and at evaluating GHG savings on changing from wet to dry process, including land use change (LUC) effects.

Methods

Life cycle assessment from cradle to gate was used. The raw material is palm fruits. The dry process includes primary production, oil room, and utilities. MPO is the main product, while palm cake and fine palm residue are co-products sold for animal feed. Case studies were undertaken without and with carbon stocks of firewood and of nitrogen recycling at plantations from fronds. Allocations by mass, economic, and heating values were conducted. The trading of GHG emissions from co-products to GHG emissions from animal feed was assessed. The GHG emissions or savings from direct LUC (dLUC) and from indirect LUC (iLUC) effects and for the change from wet to dry process were determined.

Results and discussion

Palm fruit and firewood were the major GHG emission sources. Nitrogen recycling on plantations from fronds significantly affects the GHG emissions. With the carbon stocks, the GHG emissions allocated by energy value were 550 kg CO₂ eq/t MPO. The GHG emissions were affected by ?3 to 37% for the change from wet to dry process. When the plantation area was increased by 1 ha and the palm oil extraction was changed from wet to dry process, and the change included dLUC and iLUC, the GHG savings ranged from ?0.94 to 5.08 t CO₂ eq/ha year. The iLUC was the main GHG emission source. The GHG saving mostly originated from the change of extraction process and from the dLUC effect. Based on the potential use of biodiesel production from oil palm, during 2015–2036 in Thailand, when the extraction process was changed and dLUC and iLUC effects were included, the saving in GHG emissions was estimated to range from ?35,454 to 274,774 t CO₂ eq/year.

Conclusions

The change of palm oil extraction process and the LUC effects could minimize the GHG emissions from the palm oil industry. This advantage encourages developing policies that support the dry extraction process and contribute to sustainable developments in palm oil production.

     

Carbon balance impacts of land use changes related to the life cycle of Malaysian palm oil-derived biodiesel

Purpose

The area of oil palm plantations in Malaysia is expanding by approximately 0.14 million hectare per year, and with the increasing demand for palm oil worldwide, there is no sign of the expansions slowing down. This study aims to identify the greenhouse gas emissions associated with land conversion to oil palm, in a life cycle perspective.

Methods

LCA methodology is applied to existing land use change data. The assessment includes the issue of temporary carbon storage in the plantations. Through quantification of emissions from state forest reserve and rubber plantation conversions, the average Malaysian palm oil-related land use changes are calculated.

Results and discussion

The results show that there are high emissions associated with the conversion of Malaysian state forest reserve to oil palm, whereas the conversion of rubber leaves a less significant carbon debt when indirect land use change is not included. Looking at the average Malaysian land use changes associated with oil palm shows that land use change emissions are responsible for approximately half of the total conventional biodiesel production emissions. The sensitivity analysis shows that the results could be significantly influenced by data variations in indirect land use changes, peat soils, and state forest reserve carbon stock.

Conclusions

The relatively extensive conversions of the state forest reserve must be reversed and preferably with a shift toward conversion of degraded land in order for the average Malaysian land use changes to have less impact on the production life cycle of palm oil and biodiesel.     

Environmental life cycle assessment of biodiesel produced with palm oil from Colombia

Purpose

Palm biodiesel life cycle studies have been mainly performed for Asia and focused on greenhouse gas (GHG) intensity. The purpose of this article is to present an environmental life cycle assessment (LCA) of biodiesel produced in Portugal from palm oil (PO) imported from Colombia, addressing the direct effects of land-use change (LUC), different fertilization schemes, and biogas management options at the extraction mill.

Methods

An LC inventory and model of PO biodiesel was implemented based on data collected in five Portuguese biodiesel plants and in a palm plantation and extraction mill in the Orinoquía Region of Colombia. The emissions due to carbon stock changes associated with LUC were calculated based on the Colombian oil palm area expansion from 1990 to 2010 and on historical data of vegetation cleared for planting new palm trees. Five impact categories were assessed based on ReCiPe and CML-IA methods: GHG intensity, freshwater and marine eutrophication, photochemical oxidant formation, terrestrial acidification. A sensitivity analysis of alternative allocation approaches was performed.

Results and discussion

Palm plantation was the LC phase which contributed the most to eutrophication and acidification impacts, whereas transportation and oil extraction contributed the most to photochemical oxidation. An increase in carbon stock due to LUC associated with the expansion of Colombian oil palm was calculated (palm is a perennial crop with higher carbon stock than most previous land-uses). The choice of the fertilization scheme that leads to the lowest environmental impacts is contradictory among various categories. The use of calcium ammonium nitrate (followed by ammonium sulfate) leads to the lowest acidification and eutrophication impacts. The highest GHG intensity was calculated for calcium ammonium nitrate, while the lowest was for ammonium sulfate and poultry manure. Biogas captured and flared at the oil extraction mill instead of being released into the atmosphere had the lowest impacts in all categories (GHG intensity reduced by more than 60 % when biogas is flared instead of released).

Conclusions

Recommendation on the selection of the fertilization scheme depends on the environmental priority. ReCiPe and CML showed contradictory results for eutrophication and photochemical oxidation; however, uncertainty may impair strong recommendations. GHG intensity and photochemical oxidation impacts can be significantly reduced if biogas is flared instead of being released. However, more efficient biogas management should be implemented in order to reduce the impacts further.

     

Comparison of different treatment options for palm oil production waste on a life cycle basis

Background, aim, and scope  

Globally, 45 million metric tonnes of palm oil has been produced in 2009. The production of 1 t crude palm oil requires 5 t of fresh fruit bunches (FFB). On average, processing of 1 t FFB in palm oil mills generates 230 kg empty fruit bunches (EFB) and 650 kg palm oil mill effluent (POME) as residues. These residues cause considerable environmental burdens, particularly greenhouse gas emissions. In order to reduce those emissions, four waste management options are compared in the present study using 1,000 kg of FFB as functional unit.     

Understory vegetation management affected greenhouse gas emissions and labile organic carbon pools in an intensively managed Chinese chestnut plantation

Background and aims

The impact of understory vegetation control or replacement with selected plant species, which are common forest plantation management practices, on soil C pool and greenhouse gas (GHG, including CO₂, CH₄ and N₂O) emissions are poorly understood. The objective of this paper was to investigate the effects of understory vegetation management on the dynamics of soil GHG emissions and labile C pools in an intensively managed Chinese chestnut (Castanea mollissima Blume) plantation in subtropical China.

Methods

A 12-month field experiment was conducted to study the dynamics of soil labile C pools and GHG emissions in a Chinese chestnut plantation under four different understory management practices: control (Control), understory removal (UR), replacement of understory vegetation with Medicago sativa L. (MS), and replacement with Lolium perenne L. (LP). Soil GHG emissions were determined using the static chamber/GC technique.

Results

Understory management did not change the seasonal pattern of soil GHG emissions; however, as compared with the Control, the UR treatment increased soil CO₂ and N₂O emissions and CH₄ uptake, and the MS and LP treatments increased CO₂ and N₂O emissions and reduced CH₄ uptake (P?<?0.05 for all treatment effects, same below). The total global warming potential (GWP) of GHG emissions in the Control, UR, MS, and LP treatments were 36.56, 39.40, 42.36, and 42.99 Mg CO₂ equivalent (CO₂-e) ha^?1 year^?1, respectively, with CO₂ emission accounting for more than 95 % of total GWP regardless of the understory management treatment. The MS and LP treatments increased soil organic C (SOC), total N (TN), soil water soluble organic C (WSOC) and microbial biomass C (MBC), while the UR treatment decreased SOC, TN and NO₃ ^?-N but had no effect on WSOC and MBC. Soil GHG emissions were correlated with soil temperature and WSOC across the treatments, but had no relationship with soil moisture content and MBC.

Conclusions

Although replacing competitive understory vegetation with legume or less competitive non-legume species increased soil GHG emissions and total GWP, such treatments also increased soil C and N pools and are therefore beneficial for increasing soil C storage, maintaining soil fertility, and enhancing the productivity of Chinese chestnut plantations.     

Determination of GHG contributions by subsystems in the oil palm supply chain using the LCA approach

Purpose  

With increasing attention on sustainable development, the environmental and social relevance of palm oil production are now important trade issues. The life cycle assessment (LCA) study of Malaysian oil palm products from mineral soils including palm biodiesel was aimed to provide baseline information on the environmental performance of the industry for drawing up policies pertaining to the sustainable production. The share of greenhouse gas (GHG) contribution by the various subsystems in the oil palm supply chain is considered here.     

Environmental life cycle assessment for rapeseed-derived biodiesel

Purpose

Biofuels have received special research interest, driven by concerns over high fuel prices, security of energy supplies, global climate change as well as the search of opportunities for rural economic development. This work examines the production of biodiesel derived from the transesterification of crude rapeseed oil, one of the most important sources of biodiesel in Europe, paying special attention to the environmental profile-associated to the manufacture life cycle (i.e., cradle-to-gate perspective).

Methods

To do so, a Spanish company with an average annual biodiesel production of 300,000 t was assessed in detail. The Life Cycle Assessment (LCA) study covers the whole life cycle, from the production of the crude rapeseed oil to the biodiesel production and storage. The inventory data for the foreground system consisted of average annual data obtained by on-site measurements in the company, and background data were taken from databases. Seven impact categories have been assessed in detail: abiotic depletion, acidification, eutrophication, global warming, ozone layer depletion, land competition, and photochemical oxidant formation. An energy analysis was carried out based on the cumulative nonrenewable fossil and nuclear energy demand as an additional impact category. Furthermore, well-to-wheels environmental characterization results were estimated and compared per ton-kilometer for the biodiesel (B100) and the conventional diesel so as to point out the environmental drawbacks and strengths of using biodiesel as transport fuel in a 28 t lorry.

Results and discussion

The results showed that the cultivation of the rapeseed was the main key issue in environmental terms (68 %–100 % depending on the category) mainly because of fertilizer doses and intensive agricultural practices required. With regard to the biorefinery production process, pretreatment and transesterification sections considerably contribute to the environmental profile mostly due to electricity and chemical requirements. Concerning the well-to-wheels comparison, using B100 derived from rapeseed oil instead of petroleum-based diesel would reduce nonrenewable energy dependence (?20 %), GHG emissions (?74 %), and ozone layer depletion (?44 %) but would increase acidification (+59 %), eutrophication (+214 %), photochemical smog (+119 %), and land competition.

Conclusions

The information presented in this study could help to promote the use of renewable transport biofuels. However, the extensive implementation of biodiesel (particularly rapeseed oil-derived biodiesel) in our society is enormously complex with many issues involved not only from environmental but also economical and social points of view.     

Water demand and stress from oil palm-based biodiesel production in Thailand

Purpose

The use and production of biofuels have been strongly promoted in Thailand. In order to achieve a 25 % renewable energy target in 2021, feedstock expansion is needed to satisfy the increased demand for biofuel production putting more pressure on freshwater resources. This is an important implication of biofuel production which has not yet been taken into consideration. Thus, this study intends to address the impact from freshwater use due to the biodiesel target based on life cycle assessment approach as well as to evaluate suitable areas for expansion of oil palm.

Methods

The amount of water for growing oil palm throughout its lifespan is estimated based on theoretical crop water requirement, while water demand for producing biodiesel is referred to from literature. Then, the potential impact on freshwater resources is assessed in terms of water deprivation using the water stress index of Thailand. The Alternative Energy Development Plan for 2012–2021 and areas recommended by the Ministry of Agriculture and Cooperatives are referred in this study. Additionally, two scenarios for increasing new plantation in suitable areas are proposed as expansion in a single region or spread over the three regions.

Results and discussion

The highest water requirement for oil palm-based biodiesel production is found in the central region followed by the eastern and southern (4–9, 5–16, and 4–19 m³ L^?1 biodiesel, respectively). This is because oil palm plantations in the central region are not yet fully mature. As a result, the ratio of crop water requirement associated to crop productivity will be reduced while the water productivity will be increased yearly in yield. Also, more than 99 % of the total water is required during the cultivation period. To achieve the 2021 biodiesel target with a concern towards the impact from freshwater use by means of low water deprivation, cultivating oil palm is recommended entirely in the eastern and the southern parts without expansion to the central region.

Conclusions

The impact on freshwater resources is an important implication of biofuel production as most of the water requirement of palm oil biodiesel was for oil palm cultivation. Accounting the water deprivation as one of the criteria on impact from freshwater use will provide useful support for selecting areas having less potential for inducing water stress in a watershed leads to people in these areas being less vulnerable to water stress.

     

Climate change impacts on life cycle greenhouse gas (GHG) emissions savings of biomethanol from corn and soybean

Purpose

The purpose of this study is to assess and calculate the potential impacts of climate change on the greenhouse gas (GHG) emissions reduction potentials of combined production of whole corn bioethanol and stover biomethanol, and whole soybean biodiesel and stalk biomethanol. Both fuels are used as substitutes to conventional fossil-based fuels. The product system includes energy crop (feedstock) production and transportation, biofuels processing, and biofuels distribution to service station.

Methods

The methodology is underpinned by life cycle thinking. Crop system model and life cycle assessment (LCA) model are linked in the analysis. The Decision Support System for Agrotechnology Transfer – crop system model (DSSAT-CSM) is used to simulate biomass and grain yield under different future climate scenarios generated using a combination of temperature, precipitation, and atmospheric CO₂. Historical weather data for Gainesville, Florida, are obtained for the baseline period (1981–1990). Daily minimum and maximum air temperatures are projected to increase by +2.0, +3.0, +4.0, and +5.0 °C, precipitation is projected to change by ±20, 10, and 5 %, and atmospheric CO₂ concentration is projected to increase by +70, +210, and +350 ppm. All projections are made throughout the growing season. GaBi 4.4 is used as primary LCA modelling software using crop yield data inputs from the DSSAT-CSM software. The models representation of the physical processes inventory (background unit processes) is constructed using the ecoinvent life cycle inventory database v2.0.

Results and discussion

Under current baseline climate condition, net greenhouse gas (GHG) emissions savings per hectare from corn-integrated biomethanol synthesis (CIBM) and soybean-integrated biomethanol synthesis (SIBM) were calculated as ?8,573.31 and ?3,441 kg CO₂-eq. ha^?1 yr^?1, respectively. However, models predictions suggest that these potential GHG emissions savings would be impacted by changing climate ranging from negative to positive depending on the crop and biofuel type, and climate scenario. Increased atmospheric level of CO₂ tends to minimise the negative impacts of increased temperature.

Conclusions

While policy measures are being put in place for the use of renewable biofuels driven by the desire to reduce GHG emissions from the use of conventional fossil fuels, climate change would also have impacts on the potential GHG emissions reductions resulting from the use of these renewable biofuels. However, the magnitude of the impact largely depends on the biofuel processing technology and the energy crop (feedstock) type.     

Quantifying the greenhouse benefits of the use of wood products in two popular house designs in Sydney, Australia

Purpose

As the average wood products usage per unit of floor area in Australia has decreased significantly over time, there is potential for increased greenhouse gas (GHG) mitigation benefits through an increased use of wood products in buildings. This study determined the GHG outcomes of the extraction, manufacture, transport, use in construction, maintenance and disposal of wood products and other building materials for two popular house designs in Sydney, Australia.

Methods

The life cycle assessment (LCA) was undertaken using the computer model SimaPro 7.1, with the functional unit being the supply of base building elements for domestic houses in Sydney and its subsequent use over a 50-year period. The key data libraries used were the Australian Life Cycle Inventory library, the ecoinvent library (with data adapted to Australian circumstances where appropriate) and data for timber production from an Australian study for a range of Australian forestry production systems and wood products. Two construction variations were assessed: the original intended construction, and a “timber-maximised” alternative. The indicator assessed was global warming, as the focus was on GHG emissions, and the effect of timber production, use and disposal on the fate of carbon.

Results and discussion

The timber maximised design resulted in approximately half the GHG emissions associated with the base designs. The sub-floor had the largest greenhouse impact due to the concrete components, followed by the walls due to the usage of bricks. The use of a “timber maximised” design offset between 23 and 25 % of the total operational energy of the houses. Inclusion of carbon storage in landfill made a very significant difference to GHG outcomes, equivalent to 40–60 % of total house GHG emissions. The most beneficial options for disposal from a GHG perspective were landfill and incineration with energy recovery.

Conclusions

The study showed that significant GHG emission savings were achieved by optimising the use of wood products for two common house designs in Sydney. The switch of the sub-floor and floor covering components to a “wood” option accounted for most of the GHG savings. Inclusion of end of life parameters significantly impacted on the outcomes of the study.     

Regional variations in life cycle greenhouse gas emissions of canola‐derived jet fuel produced in western Canada

This study investigates the life cycle GHG emissions of jet fuel produced via the hydroprocessed esters and fatty acids (HEFA) pathway from canola grown in western Canada, with a focus on characterizing regional influences on emissions. We examine the effects of geographic variations in soil type, agricultural inputs, farming practices, and direct land use changes on life cycle GHG emissions. We utilize GREET 2016 but replace default feedstock production inputs with geographically representative data for canola production across eight western Canadian regions (representing 99% of Canada's canola production) and replace the default conversion process with data from a novel process model previously developed in ASPEN in our research group wherein oil extraction is integrated with the HEFA‐based fuel production process. Although canola production inputs and yields vary across the regions, resulting life cycle GHG emissions are similar if effects of land use and land management changes (LMC) are not included; 44–48 g CO₂e/MJ for the eight regions (45%–50% reduction compared to petroleum jet fuel). Results are considerably more variable, 16–58 g CO₂e/MJ, when including effects of land use and LMC directly related to conversion of lands from other uses to canola production (34%–82% reduction compared to petroleum jet fuel). We establish the main sources of emissions in the life cycle of canola jet fuel (N‐fertilizer and related emissions, fuel production), identify that substantially higher emissions may occur when using feedstock sourced from regions where conversion of forested land to cropland had occurred, and identify benefits of less intense tillage practices and increased use of summerfallow land. The methods and findings are relevant in jurisdictions internationally that are incorporating GHG emissions reductions from aviation fuels in a low carbon fuel market or legislating carbon intensity reduction requirements.     

Reconciling Oil Palm Expansion and Climate Change Mitigation in Kalimantan,Indonesia

Our society faces the pressing challenge of increasing agricultural production while minimizing negative consequences on ecosystems and the global climate. Indonesia, which has pledged to reduce greenhouse gas (GHG) emissions from deforestation while doubling production of several major agricultural commodities, exemplifies this challenge. Here we focus on palm oil, the world’s most abundant vegetable oil and a commodity that has contributed significantly to Indonesia’s economy. Most oil palm expansion in the country has occurred at the expense of forests, resulting in significant GHG emissions. We examine the extent to which land management policies can resolve the apparently conflicting goals of oil palm expansion and GHG mitigation in Kalimantan, a major oil palm growing region of Indonesia. Using a logistic regression model to predict the locations of new oil palm between 2010 and 2020 we evaluate the impacts of six alternative policy scenarios on future emissions. We estimate net emissions of 128.4–211.4 MtCO₂ yr^-1 under business as usual expansion of oil palm plantations. The impact of diverting new plantations to low carbon stock land depends on the design of the policy. We estimate that emissions can be reduced by 9-10% by extending the current moratorium on new concessions in primary forests and peat lands, 35% by limiting expansion on all peat and forestlands, 46% by limiting expansion to areas with moderate carbon stocks, and 55–60% by limiting expansion to areas with low carbon stocks. Our results suggest that these policies would reduce oil palm profits only moderately but would vary greatly in terms of cost-effectiveness of emissions reductions. We conclude that a carefully designed and implemented oil palm expansion plan can contribute significantly towards Indonesia’s national emissions mitigation goal, while allowing oil palm area to double.     

Biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and characterisation of its blend with oil palm empty fruit bunch fibers

Poly(3-hydroxybutyrate-co-38 mol%-3-hydroxyvalerate) [P(3HB-co-38mol%-3HV)] was produced by Cupriavidus sp. USMAA2-4 in the presence of oleic acid and 1-pentanol. Due to enormous production of empty fruit bunch (EFB) in the oil palm plantation and high production cost of P(3HB-co-3HV), oil palm EFB fibers were used for biocomposites preparation. In this study, maleic anhydride (MA) and benzoyl peroxide (DBPO) were used to improve the miscibility between P(3HB-co-3HV) and EFB fibers. Introduction of MA into P(3HB-co-3HV) backbone reduced the molecular weight and improved the thermal stability of P(3HB-co-3HV). Thermal stability of P(3HB-co-3HV)/EFB composites was shown to be comparable to that of commercial packaging product. Composites with 35% EFB fibers content have the highest tensile strength compared to 30% and 40%. P(3HB-co-3HV)/EFB blends showed less chemicals leached compared to commercial packaging.     

The Influence of Co-product Handling Methodology on Greenhouse Gas Savings of Biofuels in the European Context

The handling of multi-output systems presents a crucial aspect of greenhouse gas (GHG) emission calculation as well as the certification of biofuels, and finding a robust and applicable method that accounts for distinctive characteristics of and benefits generated by all products is a challenge. In this work, GHG emission savings of 11 biofuel production concepts are assessed and the implications of methodological assumptions are discussed by applying the methodology defined by the Renewable Energy Directive (RED), allocation based on physical parameters, two hybrid approaches, as well as six variants of substitution. GHG emission savings according to RED methodology range from 35 to 57 %. Sugar beet-based ethanol shows highest savings. Results reveal that GHG savings according to the RED methodology present, in sum, a relatively good approximation of emission savings occurring due to substitution effects under given assumptions. An introduction of credits for products that are barely or not considered by the RED methodology due to allocation based on the lower heating value (LHV), i.e. fertilizers and wet feed co-products, reduces the difference between RED results and results based on substitution. If displacement mechanisms are considered by substitution, sugar beet-based ethanol, ethanol production by wet milling of wheat and sunflower biodiesel result in highest emission savings under given assumptions if oil that needs to be supplied due to occurring displacement mechanisms stems from rapeseed. The implementation of a method that supports concepts with high emission saving potential, e.g. allocation based the lower heating value of dry material, could promote emission reductions from biofuel provision.     

Life cycle energy and environmental benefits of a US industrial symbiosis

Purpose

The industrial ecosystem identified in and around the Campbell Industrial Park in Honolulu County, Hawai’i involves 11 facilities exchanging water, materials, and energy across an industrial cluster. This paper highlights the advantages of this arrangement using life cycle assessment to determine the energy and environmental costs and benefits of the existing pattern of exchanges.

Methods

A consequential approach was used to evaluate each material substitution for four environmental impact categories: primary energy use, greenhouse gas (GHG) emissions, acidification, and eutrophication. Each material exchange included avoided production and reduced use of virgin materials, any necessary pre-processing or transportation of local by-products, and avoided treatment or disposal of these by-products.

Results and discussion

All exchanges exhibited positive net savings across all environmental impact categories, with the exceptions of waste oil and tire-derived fuel burned as substitutes for coal. The greatest savings occur as a result of sharing steam between a combined cycle fuel oil-fired cogeneration plant and a nearby refinery. In total, the environmental savings realized by this industrial cluster are significant, equivalent to 25 % of the state’s policy goal for reducing the industrial component of GHG emissions over the next decade. The role of policy in supporting material and energy exchanges is also discussed as the central cluster of two power plants and two refineries share steam and water in part under regulatory requirements.

Conclusions

The results show environmental benefits of the sharing of by-product resources accrued on a life cycle basis, while for the local context, the reduction of imported fuels and materials helps to reduce the external dependency of Oahu’s remote island economy. The environmental benefits of materials exchanges are often ignored in energy policy, though, as in this case, they can represent considerable savings.     

Social life cycle assessment of palm oil biodiesel: a case study in Jambi Province of Indonesia

Purpose

This study aims to investigate the social implications of palm oil biodiesel via a case study using a life cycle assessment framework.

Methods

The case study was conducted in Jambi Province of Indonesia and involved several stakeholders, such as value chain actors, employees, local community members, government, and nongovernmental organization representatives related in palm oil industry. The assessment was carried out using social criteria developed by adopting the Society of Environmental Toxicology and Chemistry/United Nations Environment Programme Code of Practice, supplemented by an expert survey, and supported by literature review. Stakeholders’ perspectives were evaluated by determining the gaps between expected and perceived quality of each social criterion, which are gauged using seven-point Likert scale.

Results and discussion

Twenty-four social criteria were developed and aggregated into five social impact categories: human rights, working condition, cultural heritage, social–economic repercussion, and governance. These criteria have been weighted, useful for further application in multicriteria decision analysis. The results of the stakeholders’ survey reveal the critical social hotspots, which are the issues within the impact categories of working conditions and cultural heritage.

Conclusions

In order to achieve the social equitability of palm oil biodiesel, which is an important pillar to sustainability, efforts must be put to address these social hotspots through actions in various policy level.     

Effect of geographical location and stochastic weather variation on life cycle assessment of biodiesel production from camelina in the northwestern USA

Purpose

The effect of regional factors on life cycle assessment (LCA) of camelina seed production and camelina methyl ester production was assessed in this study. While general conclusions from LCA studies point to lower environmental impacts of biofuels, it has been shown in many studies that the environmental impacts are dependent on location, production practices, and even local weather variations.

Methods

A cradle-to-farm gate and well-to-pump approaches were used to conduct the LCA. To demonstrate the impact of agro-climatic and management factors (weather condition, soil characteristics, and management practices) on the overall emissions for four different regions including Corvallis, OR, Pendleton, OR, Pullman, WA, and Sheridan, WY, field emissions were simulated using the DeNitrification-DeComposition (DNDC) model. openLCA v.1.4.2 software was used to quantify the environmental impacts of camelina seed and camelina methyl ester production.

Results and discussion

The results showed that greenhouse gas (GHG) emissions during camelina production in different regions vary between 49.39 and 472.51 kg CO₂-eq./ha due to differences in agro-climatic and weather variations. The GHG emissions for 1 kg of camelina produced in Corvallis, Pendleton, Pullman, and Sheridan were 0.76 ± 11, 0.55 ± 10, 0.47 ± 18, and 1.26 ± 6 % kg CO₂-eq., respectively. The GHG emissions for 1000 MJ of camelina biodiesel using camelina produced in Corvallis, Pendleton, Pullman, and Sheridan were 53.60 ± 5, 48.87 ± 5, 44.33 ± 7, and 78.88 ± 4 % kg CO₂-eq., respectively. Other impact categories such as acidification and ecotoxicity for 1000 MJ of camelina biodiesel varied across the regions by 43 and 103 %, respectively.

Conclusions

It can be concluded that process-based crop models such as DNDC in conjunction with Monte Carlo analysis are helpful tools to quantitatively estimate the influence of regional factors on field emissions which consequently can provide information about the expected variability in LCA results.

     

Allocation of greenhouse gas production between wool and meat in the life cycle assessment of Australian sheep production

Purpose

Australia is the largest supplier of high-quality wool in the world. The environmental burden of sheep production must be shared between wool and meat. We examine different methods to handle these co-products and focus on proportional protein content as a basis for allocation, that is, protein mass allocation (PMA). This is the first comprehensive investigation applying PMA for calculating greenhouse gas (GHG) emissions for Australian sheep production, evaluating the variation in PMA across a large number of farms and locations over 20 years.

Materials and methods

Inventory data for two superfine wool Merino farms were obtained from farmer records, interviews and site visits in study 1. Livestock GHG emissions were modelled using Australian National GHG Inventory methods. A comparison was made of mass, protein mass and economic allocation and system expansion methods for handling co-production of wool and sheep meat. In study 2, typical crossbred ewe, Merino ewe and Merino wether flocks in each of the 28 locations in eight climate zones were modelled using the GrassGro/GRAZPLAN simulation model and historical climatic data to examine the variation in PMA values for different enterprise types.

Results and discussion

Different methods for handling co-products in study 1 changed allocated GHG emissions more than fourfold, highlighting the sensitivity to method choice. In study 2, enterprise, climate zone and year and their interactions had significant effects on PMA between wool and liveweight (LW) sold. The wool PMA (wool protein as proportion of total protein sold) least square means (LSM) were 0.61?±?0.003 for wethers, 0.43?±?0.003 for Merino ewes and 0.27?±?0.003 for crossbred ewe enterprises. The wool PMA LSM for the main effect of Köppen climate zone varied from 0.39 to 0.46. Two zones (no dry season/warm summer and distinctively dry and hot) had significantly lower wool PMA LSM, of 0.39 and 0.41, respectively, than the four other climate zones.

Conclusions

Effects of superfine wool production on GHG emissions differed between regions in response to differences in climate and productivity. Regarding methods for handling co-production, system expansion showed the greatest contrast between the two studied flocks and highlighted the importance of meat from wool production systems. However, we also propose PMA as a simple, easily applied allocation approach for use when attributional life cycle assessment (LCA) is undertaken.

     

Effects of land use on surface-atmosphere exchanges of trace gases and energy in Borneo: comparing fluxes over oil palm plantations and a rainforest

This paper reports measurements of land-atmosphere fluxes of sensible and latent heat, momentum, CO(2), volatile organic compounds (VOCs), NO, NO(2), N(2)O and O(3) over a 30 m high rainforest canopy and a 12 m high oil palm plantation in the same region of Sabah in Borneo between April and July 2008. The daytime maximum CO(2) flux to the two canopies differs by approximately a factor of 2, 1200 mg C m(-2) h(-1) for the oil palm and 700 mg C m(-2) h(-1) for the rainforest, with the oil palm plantation showing a substantially greater quantum efficiency. Total VOC emissions are also larger over the oil palm than over the rainforest by a factor of 3. Emissions of isoprene from the oil palm canopy represented 80 per cent of the VOC emissions and exceeded those over the rainforest in similar light and temperature conditions by on average a factor of 5. Substantial emissions of estragole (1-allyl-4-methoxybenzene) from the oil palm plantation were detected and no trace of this VOC was detected in or above the rainforest. Deposition velocities for O(3) to the rainforest were a factor of 2 larger than over oil palm. Emissions of nitrous oxide were larger from the soils of the oil palm plantation than from the soils of the rainforest by approximately 25 per cent. It is clear from the measurements that the large change in the species composition generated by replacing rainforest with oil palm leads to profound changes in the net exchange of most of the trace gases measured, and thus on the chemical composition of the boundary layer over these surfaces.