A bibliometric investigation of life cycle assessment research in the web of science databases

Purpose

Over the past few decades, life cycle assessment (LCA) methodologies have been developed extensively, and there has been a growing interest in LCA research. However, as attested by scientific literature, few systematic, synthesizing, and visualizing studies have been found on LCA research which show how this field has evolved over time. The goal of this mainly bibliometric, empirical study is to get insight into publication performance of global LCA research, characterize its intellectual structure, and trace its evolution by using the bibliometric method with visual mapping.

Methods

Based on the data from the ISI Web of Science databases Science Citation Index Expanded (SCI-EXPANDED), Social Sciences Citation Index (SSCI), Conference Proceedings Citation Index—Science (CPCI-S) and Conference Proceedings Citation Index —Social Science & Humanities (CPCI-SSH) in the period of 1998–2013, bibliometric methods are used to investigate general development profiles of LCA research, while knowledge domain visualization technologies are employed to conduct a further co-citation analysis.

Results and discussion

The results and discussions of this research mainly shed light on (1) basic statistics of significant publication performances, (2) research focuses and their intellectual base in LCA research, (3) how the streams of research evolved during the whole period of interest.

Conclusions

A new work on systematic and synthesizing study is conducted in this research to evaluate and map LCA research-related context. Some salient scholarly journals and institutions are identified that have shown a significant impact during the exponential growth of LCA research in the past 16 years. Biofuel, process design, solid waste management, and livestock production-related LCA researches are the main areas where interest is surging, confirmed by the active citers in each specialty. Furthermore, from the perspective of science mapping, evolution of LCA research is traced and some pivot publications are identified, which work as structural holes for the LCA-research development in the given time window.     

The intellectual structure and substance of the knowledge utilization field: A longitudinal author co-citation analysis, 1945 to 2004

Background

It has been argued that science and society are in the midst of a far-reaching renegotiation of the social contract between science and society, with society becoming a far more active partner in the creation of knowledge. On the one hand, new forms of knowledge production are emerging, and on the other, both science and society are experiencing a rapid acceleration in new forms of knowledge utilization. Concomitantly since the Second World War, the science underpinning the knowledge utilization field has had exponential growth. Few in-depth examinations of this field exist, and no comprehensive analyses have used bibliometric methods.

Methods

Using bibliometric analysis, specifically first author co-citation analysis, our group undertook a domain analysis of the knowledge utilization field, tracing its historical development between 1945 and 2004. Our purposes were to map the historical development of knowledge utilization as a field, and to identify the changing intellectual structure of its scientific domains. We analyzed more than 5,000 articles using citation data drawn from the Web of Science^®. Search terms were combinations of knowledge, research, evidence, guidelines, ideas, science, innovation, technology, information theory and use, utilization, and uptake.

Results

We provide an overview of the intellectual structure and how it changed over six decades. The field does not become large enough to represent with a co-citation map until the mid-1960s. Our findings demonstrate vigorous growth from the mid-1960s through 2004, as well as the emergence of specialized domains reflecting distinct collectives of intellectual activity and thought. Until the mid-1980s, the major domains were focused on innovation diffusion, technology transfer, and knowledge utilization. Beginning slowly in the mid-1980s and then growing rapidly, a fourth scientific domain, evidence-based medicine, emerged. The field is dominated in all decades by one individual, Everett Rogers, and by one paradigm, innovation diffusion.

Conclusion

We conclude that the received view that social science disciplines are in a state where no accepted set of principles or theories guide research (i.e., that they are pre-paradigmatic) could not be supported for this field. Second, we document the emergence of a new domain within the knowledge utilization field, evidence-based medicine. Third, we conclude that Everett Rogers was the dominant figure in the field and, until the emergence of evidence-based medicine, his representation of the general diffusion model was the dominant paradigm in the field.     

Life cycle assessment evaluation of green product labeling systems for residential construction

Purpose

Life cycle assessment (LCA) is a tool that can be utilized to holistically evaluate novel trends in the construction industry and the associated environmental impacts. Green labels are awarded by several organizations based on single or multiple attributes. The use of multi-criteria labels is a good start to the labeling process as opposed to single criteria labels that ignore a majority of impacts from products. Life cycle thinking, in theory, has the potential to improve the environmental impacts of labeling systems. However, LCA databases currently are lacking in detailed information about products or sometimes provide conflicting information.

Method

This study compares generic and green-labeled carpets, paints, and linoleum flooring using the Building for Environmental and Economic Sustainability (BEES) LCA database. The results from these comparisons are not intuitive and are contradictory in several impact categories with respect to the greenness of the product. Other data sources such as environmental product declarations and ecoinvent are also compared with the BEES data to compare the results and display the disparity in the databases.

Results

This study shows that partial LCAs focused on the production and transportation phase help in identifying improvements in the product itself and improving the manufacturing process but the results are uncertain and dependent upon the source or database. Inconsistencies in the data and missing categories add to the ambiguity in LCA results.

Conclusions

While life cycle thinking in concept can improve the green labeling systems available, LCA data is lacking. Therefore, LCA data and tools need to improve to support and enable market trends.     

System delimitation in agricultural consequential LCA

Background, aim, and scope

When dealing with system delimitation in environmental life cycle assessment (LCA), two methodologies are typically referred to: consequential LCA and attributional LCA. The consequential approach uses marginal data and avoids co-product allocation by system expansion. The attributional approach uses average or supplier-specific data and treats co-product allocation by applying allocation factors. Agricultural LCAs typically regard local production as affected and they only include the interventions related to the harvested area. However, as changes in demand and production may affect foreign production, yields and the displacement of other crops in regions where the agricultural area is constrained, there is a need for incorporating the actual affected processes in agricultural consequential LCA. This paper presents a framework for defining system boundaries in consequential agricultural LCA. The framework is applied to an illustrative case study; LCA of increased demand for wheat in Denmark. The aim of the LCA screening is to facilitate the application of the proposed methodology. A secondary aim of the LCA screening is to illustrate that there are different ways to meet increased demand for agricultural products and that the environmental impact from these different ways vary significantly.

Materials and methods

The proposed framework mainly builds on the work of Ekvall T, Weidema BP (Int J Life Cycle Assess 9(3):pp. 161–171, 2004), agricultural statistics (FAOSTAT, FAOSTAT Agriculture Data, Food and Agriculture Organisation of the United Nations (2006), http://apps.fao.org/ (accessed June)), and agricultural outlook (FAPRI, US and world agricultural outlook, Food and Agriculture Research Institute, Iowa, 2006a). The framework and accompanying guidelines concern the suppliers affected, the achievement of increased production (area or yield), and the substitutions between crops. The framework, which is presented as a decision tree, proposes four possible systems that may be affected as a result of the increased demand of a certain crop in a certain area.

Results

The core of the proposed methodology is a decision tree, which guides the identification of affected processes in consequential agricultural LCA. The application of the methodology is illustrated with a case study presenting an LCA screening of wheat in Denmark. Different scenarios of how increased demand for wheat can be met show significant differences in emission levels as well as land use.

Discussion

The great differences in potential environmental impacts of the analysed results underpin the importance of system delimitation. The consequential approach is appointed as providing a more complete and accurate but also less precise result, while the attributional approach provides a more precise result but with inherent blind spots, i.e. a less accurate result.

Conclusions

The main features of the proposed framework and case study are: (1) an identification of significant sensitivity on results of system delimitation, and (2) a formalised way of identifying blind spots in attributional agricultural LCAs.

Recommendations and perspectives

It is recommended to include considerations on the basis of the framework presented in agricultural LCAs if relevant. This may be done either by full quantification or as qualitative identification of the most likely ways the agricultural product system will respond on changed demand. Hereby, it will be possible to make reservations to the conclusions drawn on the basis of an attributional LCA.     

Life cycle assessment (LCA) applied to the process industry: a review

Purpose

Life cycle assessment (LCA) methodology is a well-established analytical method to quantify environmental impacts, which has been mainly applied to products. However, recent literature would suggest that it has also the potential as an analysis and design tool for processes, and stresses that one of the biggest challenges of this decade in the field of process systems engineering (PSE) is the development of tools for environmental considerations.

Method

This article attempts to give an overview of the integration of LCA methodology in the context of industrial ecology, and focuses on the use of this methodology for environmental considerations concerning process design and optimization.

Results

The review identifies that LCA is often used as a multi-objective optimization of processes: practitioners use LCA to obtain the inventory and inject the results into the optimization model. It also shows that most of the LCA studies undertaken on process analysis consider the unit processes as black boxes and build the inventory analysis on fixed operating conditions.

Conclusions

The article highlights the interest to better assimilate PSE tools with LCA methodology, in order to produce a more detailed analysis. This will allow optimizing the influence of process operating conditions on environmental impacts and including detailed environmental results into process industry.     

Application of robust optimization in matrix-based LCI for decision making under uncertainty

Purpose

When product systems are optimized to minimize environmental impacts, uncertainty in the process data may impact optimal decisions. The purpose of this article is to propose a mathematical method for life cycle assessment (LCA) optimization that protects decisions against uncertainty at the life cycle inventory (LCI) stage.

Methods

A robust optimization approach is proposed for decision making under uncertainty in the LCI stage. The proposed approach incorporates data uncertainty into an optimization problem in which the matrix-based LCI model appears as a constraint. The level of protection against data uncertainty in the technology and intervention matrices can be controlled to reflect varying degrees of conservatism.

Results and discussion

A simple numerical example on an electricity generation product system is used to illustrate the main features of this methodology. A comparison is made between a robust optimization approach, and decision making using a Monte Carlo analysis. Challenges to implement the robust optimization approach on common uncertainty distributions found in LCA and on large product systems are discussed. Supporting source code is available for download at https://github.com/renwang/Robust_Optimization_LCI_Uncertainty.

Conclusions

A robust optimization approach for matrix-based LCI is proposed. The approach incorporates data uncertainties into an optimization framework for LCI and provides a mechanism to control the level of protection against uncertainty. The tool computes optimal decisions that protects against worst-case realizations of data uncertainty. The robust optimal solution is conservative and is able to avoid the negative consequences of uncertainty in decision making.     

Analysis of the link between a definition of sustainability and the life cycle methodologies

Purpose

It has been claimed that in order to assess the sustainability of products, a combination of the results from a life cycle assessment (LCA), social life cycle assessment (SLCA) and life cycle costing (LCC) is needed. Despite the frequent reference to this claim in the literature, very little explicit analysis of the claim has been made. The purpose of this article is to analyse this claim.

Methods

An interpretation of the goals of sustainability, as outlined in the report Our Common Future (WCED 1987), which is the basis for most literature on sustainability assessment in the LCA community, is presented and detailed to a level enabling an analysis of the relation to the impact categories at midpoint level considered in life cycle (LC) methodologies.

Results

The interpretation of the definition of sustainability as outlined in Our Common Future (WCED 1987) suggests that the assessment of a product's sustainability is about addressing the extent to which product life cycles affect poverty levels among the current generation, as well as changes in the level of natural, human and produced and social capital available for the future population. It is shown that the extent to which product life cycles affect poverty to some extent is covered by impact categories included in existing SLCA approaches. It is also found that the extent to which product life cycles affect natural capital is well covered by LCA, and human capital is covered by both LCA and SLCA but in different ways. Produced capital is not to any large extent considered in any of the LC methodologies. Furthermore, because of the present level of knowledge about what creates and destroys social capital, it is difficult to assess how it relates to the LC methodologies. It is also found that the LCC is only relevant in the context of a life cycle sustainability assessment (LCSA) if focusing on the monetary gains or losses for the poor. Yet, this is an aspect which is already considered in several SLCA approaches.

Conclusions

The current consensus that LCSA can be performed through combining the results from an SLCA, LCA and LCC is only partially supported in this article: The LCSA should include both an LCA and an SLCA, which should be expanded to better cover how product life cycles affect poverty and produced capital. The LCC may be included if it has as a focus to asses income gains for the poor.     

Development of a dynamic LCA approach for the freshwater ecotoxicity impact of metals and application to a case study regarding zinc fertilization

Purpose

Temporal variability is a major source of uncertainty in current life cycle assessment (LCA) practice. In this paper, the recently developed dynamic LCA approach is adapted to assess freshwater ecotoxicity impacts of metals. The objective is to provide relevant information regarding the distribution and magnitude of metal impacts over time and to show whether the dynamic approach significantly influences the conclusions of an LCA. An LCA of zinc fertilization in agriculture was therefore carried out.

Methods

Dynamic LCA is based on the temporal disaggregation of the inventory, which is then assessed using time-horizon-dependent characterization factors. The USEtox multimedia fate model is used to develop time-horizon-dependent characterization factors for the freshwater ecotoxicity impact of 18 metals. Mass balance equations are solved dynamically to obtain fate factors as a function of time, providing both instantaneous (impact at time t following a pulse emission) and cumulative (total time-integrated impact following a pulse emission) characterization factors (CFs).

Results and discussion

Time-horizon-dependent CFs for freshwater ecotoxicity depend on the emission compartment and the metal itself. The two variables clearly influence metal fate aspects such as the maximum mass loading reaching freshwater and the persistence time of metals into this compartment. The time needed to reach the total impact for each metal may exceed thousands of years, so the time horizon used in the analysis constitutes a determining factor. The case study reveals that the results of a classical LCA are always higher than those obtained from a dynamic LCA, especially for short time horizons. For instance, at the end of a 100-year fertilization treatment, only 25 % of the impacts obtained through traditional LCA occurred.

Conclusions

Results show that dynamic LCA enables assessing freshwater ecotoxicity impacts of metals over time, allowing decision makers to test the sensitivity of their results to the choice of a time horizon. For the particular case study of zinc fertilization over a period of 20 years, the use of time-horizon-dependent CFs is more important in determining the dynamics of impacts than the timing of emission.     

Moving towards an Egyptian national life cycle inventory database

Purpose

Life cycle inventory (LCI) data are region-specific because energy fuel mixtures and methods of production often differ from region to region. LCI database examples include US LCI, Ecoinvent v.2, and NIST, each of which is country-specific. Thus, the main aim of this study is to show that Egypt is in need of an Egyptian National LCI (ENLCI) database and to focus on the means of developing a database specific to Egypt.

Methods

Arab countries have thus far engaged in virtually no life cycle assessment (LCA) studies, and a significant neglect of this matter is in evidence for the continent of Africa and, in particular, Egypt. Thus, this study suggests an organizational and managerial framework for the development of a national LCI database and sheds light on the required LCI database categories and data quality for practical solutions reflecting who is equipped to do what in order to keep pace with the world.

Results

The results from this review are useful to standardize the study of the life cycle assessment concept in Egypt; to form a foundation for development of an Egyptian database for facilitating a cleaner environment; to encourage stakeholders, such as the environmental agencies, Egyptian Housing and Building Research Center, and the Ministry of Industry; to propose an organizational framework in which they play a central role; and to provide investment to initiate development.

Conclusions

The analysis indicates that the development of a LCI database specific to Egypt is difficult because Egypt has various technical and organizational challenges, but a roadmap of actions to be taken to move ahead is provided. The success of this roadmap depends on the capacity for developing the necessary technical and financial support and on strong partnerships with industry, government, LCA professionals, and academia.     

Carbon sequestration in LCA,a proposal for a new approach based on the global carbon cycle; cases on wood and on bamboo

Purpose

There are many recent proposals in life cycle assessment (LCA) to calculate temporary storage of carbon in bio-based products. However, there is still no consensus on how to deal with the issue. The main questions are: how do these proposals relate to each other, to what extent are they in line with the classical LCA method (as defined in ISO 14044) and the global mass balances as proposed by the IPCC, and is there really a need to introduce a discounting system for delayed CO₂ emissions?

Methods

This paper starts with an analysis of the widely applied specification of PAS 2050 and the ILCD Handbook, both specifying the credit for carbon sequestration as ‘optional’ in LCA. From this analysis, it is concluded that these optional calculations give rather different results compared to the baseline LCA method. Since these optional calculations are not fully in line with the global carbon mass balances, a new calculation method is proposed. To validate the new method, two cases (one on wood and one bamboo products) are given. These cases show the practical application and the consequences of the new approach. Finally, the main issue is evaluated and discussed: is it a realistic approach to allocate less damage to the same emission, when it is released later in time?

Results and discussion

This paper proposes a new approach based on the global carbon cycle and land-use change, translated to the level of individual products in LCA. It is argued that only a global growth of forest area and a global growth of application of wood in the building industry contribute to extra carbon sequestration, which might be allocated as a credit to the total market of wood products in LCA. This approach is different from approaches where temporary storage of carbon in trees is directly allocated to a product itself.

Conclusions

In the proposed approach, there seems to be no need for a discounting system of delayed CO₂ emissions. The advantage of wood and wood-based products can be described in terms of land-use change on a global scale in combination with a credit for heat recovery at the end-of-life (if applicable).     

Environmental assessment of sewage effluent disinfection system: electron beam, ultraviolet, and ozone using life cycle assessment

Purpose

This study assesses the impacts of three different disinfection processes of sewage effluent, namely the electron beam (E-beam), ultraviolet (UV), and ozone systems, on the environment by using life cycle assessment (LCA).

Methods

The LCA employed was the comparative LCA which consists of three parts according to life cycle stages. Electricity consumption was the reference flow that can yield 99% disinfection efficiency for microorganisms present in a 1?×?10⁵?m³?day^?1 sewage treatment plant effluent over 20?years.

Results

The comparison of the LCA results indicated that the environmental impact of the UV disinfection system was the lowest, followed by the E-beam and ozone disinfection systems. The key issues of the E-beam, UV, and ozone disinfection systems are electricity consumption and SF₆ usage, electricity consumption and UV lamp, and electricity consumption and liquid oxygen feeding system, respectively.

Conclusions

Electricity consumption is the key input parameter that determines the LCA results.     

LCA as an element in environmental management systems—comparison of conditions in selected organisations in Poland, Sweden and Germany

Purpose

In this two-part paper (Background and Initial Assumptions (part 1) and Results of Survey Research (part 2)), we present surveys whose main objective is to determine whether, and to what extent, the life cycle assessment (LCA) technique is used for the identification and assessment of environmental aspects in environmental management systems (EMS) and whether there are any differences in this respect between the companies and countries analysed.

Methods

The survey research was carried out using the computer assisted self-administered interviewing method among selected Polish, German and Swedish organisations which implement EMS in accordance with the requirements of ISO 14001 and/or the EMAS regulation.

Results

The organisations investigated, regardless of their country, are dominated by qualitative and semi-quantitative techniques of assessment and identification of environmental aspects. LCA was used sporadically, although some differences can be observed between the countries analysed.

Conclusions

The environmental managers accustomed to traditional qualitative and semi-quantitative solutions have not been given preparation to enable them to understand and adopt different approaches such as LCA. On the other hand, representatives of the organisations investigated declared that they were ready to accept an even longer timescale for the identification and assessment processes relating to environmental aspects, which represents a potential opportunity for LCA. The more precise understanding and definition of environmental problems that are precisely defined in LCA would represent a novelty for environmental managers. In practice, environmental problems are defined in a general sense and rather ambiguously, as this level of detail is sufficient in the context of qualitative and semi-quantitative techniques commonly used for the identification and assessment of environmental aspects.     

Error propagation methods for LCA—a comparison

Purpose

The analysis of uncertainty in life cycle assessment (LCA) studies has been a topic for more than 10 years, and many commercial LCA programs now feature a sampling approach called Monte Carlo analysis. Yet, a full Monte Carlo analysis of a large LCA system, for instance containing the 4,000 unit processes of ecoinvent v2.2, is rarely carried out by LCA practitioners. One reason for this is computation time. An alternative faster than Monte Carlo method is analytical error propagation by means of a Taylor series expansion; however, this approach suffers from being explained in the literature in conflicting ways, hampering implementation in most software packages for LCA. The purpose of this paper is to compare the two different approaches from a theoretical and practical perspective.

Methods

In this paper, we compare the analytical and sampling approaches in terms of their theoretical background and their mathematical formulation. Using three case studies—one stylized, one real-sized, and one input–output (IO)-based—we approach these techniques from a practical perspective and compare them in terms of speed and results.

Results

Depending on the precise question, a sampling or an analytical approach provides more useful information. Whenever they provide the same indicators, an analytical approach is much faster but less reliable when the uncertainties are large.

Conclusions

For a good analysis, analytical and sampling approaches are equally important, and we recommend practitioners to use both whenever available, and we recommend software suppliers to implement both.     

A reference database for tumor-related genes co-expressed with interleukin-8 using genome-scale in silico analysis

Background

The EST database provides a rich resource for gene discovery and in silico expression analysis. We report a novel computational approach to identify co-expressed genes using EST database, and its application to IL-8.

Results

IL-8 is represented in 53 dbEST cDNA libraries. We calculated the frequency of occurrence of all the genes represented in these cDNA libraries, and ranked the candidates based on a Z-score. Additional analysis suggests that most IL-8 related genes are differentially expressed between non-tumor and tumor tissues. To focus on IL-8's function in tumor tissues, we further analyzed and ranked the genes in 16 IL-8 related tumor libraries.

Conclusions

This method generated a reference database for genes co-expressed with IL-8 and could facilitate further characterization of functional association among genes.     

Assessing freshwater use impacts in LCA: Part I—inventory modelling and characterisation factors for the main impact pathways

Background, aim and scope

Freshwater is a basic resource for humans; however, its link to human health is seldom related to lack of physical access to sufficient freshwater, but rather to poor distribution and access to safe water supplies. On the other hand, freshwater availability for aquatic ecosystems is often reduced due to competition with human uses, potentially leading to impacts on ecosystem quality. This paper summarises how this specific resource use can be dealt with in life cycle analysis (LCA).

Main features

The main quantifiable impact pathways linking freshwater use to the available supply are identified, leading to definition of the flows requiring quantification in the life cycle inventory (LCI).

Results

The LCI needs to distinguish between and quantify evaporative and non-evaporative uses of ‘blue’ and ‘green’ water, along with land use changes leading to changes in the availability of freshwater. Suitable indicators are suggested for the two main impact pathways [namely freshwater ecosystem impact (FEI) and freshwater depletion (FD)], and operational characterisation factors are provided for a range of countries and situations. For FEI, indicators relating current freshwater use to the available freshwater resources (with and without specific consideration of water ecosystem requirements) are suggested. For FD, the parameters required for evaluation of the commonly used abiotic depletion potentials are explored.

Discussion

An important value judgement when dealing with water use impacts is the omission or consideration of non-evaporative uses of water as impacting ecosystems. We suggest considering only evaporative uses as a default procedure, although more precautionary approaches (e.g. an ‘Egalitarian’ approach) may also include non-evaporative uses. Variation in seasonal river flows is not captured in the approach suggested for FEI, even though abstractions during droughts may have dramatic consequences for ecosystems; this has been considered beyond the scope of LCA.

Conclusions

The approach suggested here improves the representation of impacts associated with freshwater use in LCA. The information required by the approach is generally available to LCA practitioners

Recommendations and perspectives

The widespread use of the approach suggested here will require some development (and consensus) by LCI database developers. Linking the suggested midpoint indicators for FEI to a damage approach will require further analysis of the relationship between FEI indicators and ecosystem health.     

Fitting hidden Markov models of protein domains to a target species: application to Plasmodium falciparum

Background

The identification of gene sets that are significantly impacted in a given condition based on microarray data is a crucial step in current life science research. Most gene set analysis methods treat genes equally, regardless how specific they are to a given gene set.

Results

In this work we propose a new gene set analysis method that computes a gene set score as the mean of absolute values of weighted moderated gene t-scores. The gene weights are designed to emphasize the genes appearing in few gene sets, versus genes that appear in many gene sets. We demonstrate the usefulness of the method when analyzing gene sets that correspond to the KEGG pathways, and hence we called our method P athway A nalysis with D own-weighting of O verlapping G enes (PADOG). Unlike most gene set analysis methods which are validated through the analysis of 2-3 data sets followed by a human interpretation of the results, the validation employed here uses 24 different data sets and a completely objective assessment scheme that makes minimal assumptions and eliminates the need for possibly biased human assessments of the analysis results.

Conclusions

PADOG significantly improves gene set ranking and boosts sensitivity of analysis using information already available in the gene expression profiles and the collection of gene sets to be analyzed. The advantages of PADOG over other existing approaches are shown to be stable to changes in the database of gene sets to be analyzed. PADOG was implemented as an R package available at: http://bioinformaticsprb.med.wayne.edu/PADOG/or http://www.bioconductor.org.     

Rethinking a product and its function using LCA—experiences of New Zealand manufacturing companies

Purpose

It has been recognised that life cycle assessment (LCA) has a role in framing problem situations in environmental management. Yet relatively few studies have investigated whether the use of LCA does actually lead to the reconceptualisation of product systems as opposed to answering predefined questions. This paper discusses the experiences of six manufacturing firms that commissioned LCA studies as part of a life cycle management project managed by Landcare Research in New Zealand.

Methods

The initial goal and scope of the study was developed by each company’s representative in a workshop that was organised as part of the LCM project. The scope for three of the studies was subsequently redefined by the LCA specialists at Landcare Research and agreed with senior managers at the company. The LCA specialists undertook the LCA studies and presented the results to the companies.

Results and discussion

A significant reconceptualisation of the product system took place in three of the six LCA studies. This reconceptualisation would not have taken place if the scope of the LCA studies had been restricted to address the questions originally asked by the companies. The three companies showed some resistance to expanding the scope.

Conclusions

Use of LCA can lead to reconceptualisation of product systems by companies and quite different priorities for improvement options. Initial resistance to expanding a study’s scope may be (partially) overcome by data collection activities and informal discussions between the LCA specialist and company staff during the process of undertaking the LCA study.