The type III secretion system tip complex and translocon

The type III secretion machinery of Gram-negative bacteria, also known as the injectisome or needle complex, is composed of a basal body spanning both bacterial membranes and the periplasm, and an external needle protruding from the bacterial surface. A set of three proteins, two hydrophobic and one hydrophilic, are required to allow translocation of proteins from the bacterium to the host cell cytoplasm. These proteins are involved in the formation of a translocation pore, the translocon, in the host cell membrane. Exciting progress has recently been made on the interaction between the translocators and the injectisome needle and the assembly of the translocon in the host cell membrane. As expected, the two hydrophobic translocators insert into the target cell membrane. Unexpectedly, the third, hydrophilic translocator, forms a complex on the distal end of the injectisome needle, the tip complex, and serves as an assembly platform for the two hydrophobic translocators.     

The type III secretion system needle,tip, and translocon

Many Gram‐negative bacteria pathogenic to plants and animals deploy the type III secretion system (T3SS) to inject virulence factors into their hosts. All bacteria that rely on the T3SS to cause infectious diseases in humans have developed antibiotic resistance. The T3SS is an attractive target for developing new antibiotics because it is essential in virulence, and part of its structural component is exposed on the bacterial surface. The structural component of the T3SS is the needle apparatus, which is assembled from over 20 different proteins and consists of a base, an extracellular needle, a tip, and a translocon. This review summarizes the current knowledge on the structure and assembly of the needle, tip, and translocon.     

Self-chaperoning of the type III secretion system needle tip proteins IpaD and BipD

Bacteria expressing type III secretion systems (T3SS) have been responsible for the deaths of millions worldwide, acting as key virulence elements in diseases ranging from plague to typhoid fever. The T3SS is composed of a basal body, which traverses both bacterial membranes, and an external needle through which effector proteins are secreted. We report multiple crystal structures of two proteins that sit at the tip of the needle and are essential for virulence: IpaD from Shigella flexneri and BipD from Burkholderia pseudomallei. The structures reveal that the N-terminal domains of the molecules are intramolecular chaperones that prevent premature oligomerization, as well as sharing structural homology with proteins involved in eukaryotic actin rearrangement. Crystal packing has allowed us to construct a model for the tip complex that is supported by mutations designed using the structure.     

Port of entry--the type III secretion translocon

Many Gram-negative plant and animal pathogenic bacteria use a specialized type III secretion system (TTSS) as a molecular syringe to inject effector proteins directly into the host cell. Protein translocation across the eukaryotic host cell membrane is presumably mediated by a bacterial translocon. The structure of this predicted transmembrane complex and the mechanism of transport are far from being understood. In bacterial pathogens of animals, several putative type III secretion translocon proteins (TTPs) have been identified. Interestingly, TTP sequences are not conserved among different bacterial species, however, there are structural similarities such as transmembrane segments and coiled-coil regions. Accumulating evidence suggests that TTPs are components of oligomeric protein channels that are inserted into the host cell membrane by the TTSS.     

Membrane targeting and pore formation by the type III secretion system translocon

The type III secretion system (T3SS) is a complex macromolecular machinery employed by a number of Gram-negative species to initiate infection. Toxins secreted through the system are synthesized in the bacterial cytoplasm and utilize the T3SS to pass through both bacterial membranes and the periplasm, thus being introduced directly into the eukaryotic cytoplasm. A key element of the T3SS of all bacterial pathogens is the translocon, which comprises a pore that is inserted into the membrane of the target cell, allowing toxin injection. Three macromolecular partners associate to form the translocon: two are hydrophobic and one is hydrophilic, and the latter also associates with the T3SS needle. In this review, we discuss recent advances on the biochemical and structural characterization of the proteins involved in translocon formation, as well as their participation in the modification of intracellular signalling pathways upon infection. Models of translocon assembly and regulation are also discussed.     

Functional insights into the Shigella type III needle tip IpaD in secretion control and cell contact

Type III secretion apparatus (T3SA) are complex nanomachines that insert a translocation pore into the host cell membrane through which effector proteins are injected into the cytosol. In Shigella, the pore is inserted by a needle tip complex that also controls secretion. IpaD is the key protein that rules the composition of the tip complex before and upon cell contact or Congo red (CR) induction. However, how IpaD is involved in secretion control and translocon insertion remains not fully understood. Here, we report the phenotypic analysis of 20 10‐amino acids deletion variants all along the coiled‐coil and the central domains of IpaD (residues 131–332). Our results highlight three classes of T3S phenotype; (i) wild‐type secretion, (ii) constitutive secretion of all classes of effectors, and (iii) constitutive secretion of translocators and early effectors, but not of late effectors. Our data also suggest that the composition of the tip complex defines both the T3SA inducibility state and late effectors secretion. Finally, we shed light on a new aspect regarding the contact of the needle tip with cell membrane by uncoupling the Shigella abilities to escape macrophage vacuole, and to insert the translocation pore or to invade non‐phagocytic cells.     

The filamentous type III secretion translocon of enteropathogenic Escherichia coli

Enteropathogenic Escherichia coli (EPEC) uses a type III secretion system (TTSS) to inject effector proteins into the plasma membrane and cytosol of infected cells. To translocate proteins, EPEC, like Salmonella and Shigella , is believed to assemble a macromolecular complex (type III secreton) that spans both bacterial membranes and has a short needle-like projection. However, there is a special interest in studying the EPEC TTSS owing to the fact that one of the secreted proteins, EspA, is assembled into a unique filamentous structure also required for protein translocation. In this report we present electron micrographs of EspA filaments which reveal a regular segmented substructure. Recently we have shown that deletion of the putative structural needle protein, EscF, abolished protein secretion and formation of EspA filaments. Moreover, we demonstrated that EspA can bind directly to EscF, suggesting that EspA filaments are physically linked to the EPEC needle complex. In this paper we provide direct evidence for the association between an EPEC bacterial membrane needle complex and EspA filaments, defining a new class of filamentous TTSS.     

pH sensitivity of type III secretion system tip proteins

Many pathogenic gram-negative bacteria employ type III secretion systems to transport proteins into the host cell membrane and cytoplasm to subvert normal cellular functions. The type III secretion apparatus consists of a basal body spanning the inner and outer bacterial membranes and a needle which extends away from the bacterium. Recent work has found that a special class of proteins localizes to the tip of the needle to control secretion of effector proteins. Five of these tip proteins are IpaD (Shigella flexneri), BipD (Burkholderia pseudomallei), SipD (Salmonella spp.), LcrV (Yersinia spp.), and PcrV (Pseudomonas aeruginosa). In this study, the conformational stability of these proteins was characterized as a function of pH and temperature. Understanding the stability of the proteins in different pH environments is particularly important since they are expected to encounter different pH environments in their passage through the gastrointestinal tract and are exposed to low pH microenvironments near the surface of target cell membranes. Secondary and tertiary structural changes were monitored using the spectroscopic techniques of far-UV circular dichroism, Trp fluorescence, ANS fluorescence, and ultraviolet absorption spectroscopy. Optical density and right angle scattering measurements were also used to evaluate protein association/dissociation. Empirical phase diagrams were then applied to mathematically combine data from the various spectroscopic techniques to provide a global picture of the proteins' structural behavior in solution. The responses of the proteins to changes in temperature and pH conditions reveal two distinct subfamilies in terms of stability. The first is that of IpaD, BipD, and SipD whose corresponding phase diagrams show conformational differences at pH 5-6. The conserved pH dependence in this subfamily suggests possible common mechanistic function. In the second subfamily (LcrV and PcrV), conformational stability is directly related to pH, also indicating mechanistic similarities.     

The PscE-PscF-PscG complex controls type III secretion needle biogenesis in Pseudomonas aeruginosa

Type III secretion (T3S) systems play key roles in pathogenicity of many Gram-negative bacteria and are employed to inject toxins directly into the cytoplasm of target cells. They are composed of over 20 different proteins that associate into a basal structure that traverses both inner and outer bacterial membranes and a hollow, needle-like structure through which toxins travel. The PscF protein is the main component of the Pseudomonas aeruginosa T3S needle. Here we demonstrate that PscF, when purified on its own, is able to form needle-like fibers of 8 nm in width and >1 microm in length. In addition, we demonstrate for the first time that the T3S needle subunit requires two cytoplasmic partners, PscE and PscG, in P. aeruginosa, which trap PscF in a ternary, 1:1:1 complex, thus blocking it in a monomeric state. Knock-out mutants deficient in PscE and PscG are non-cytotoxic, lack PscF, and are unable to export PscF encoded extrachromosomally. Temperature-scanning circular dichroism measurements show that the PscE-PscF-PscG complex is thermally stable and displays a cooperative unfolding/refolding pattern. Thus, PscE and PscG prevent PscF from polymerizing prematurely in the P. aeruginosa cytoplasm and keep it in a secretion prone conformation, strategies which may be shared by other pathogens that employ the T3S system for infection.     

Shigella IpaD has a dual role: signal transduction from the type III secretion system needle tip and intracellular secretion regulation

Type III secretion systems (T3SSs) are protein injection devices essential for the interaction of many Gram‐negative bacteria with eukaryotic cells. While Shigella assembles its T3SS when the environmental conditions are appropriate for invasion, secretion is only activated after physical contact with a host cell. First, the translocators are secreted to form a pore in the host cell membrane, followed by effectors which manipulate the host cell. Secretion activation is tightly controlled by conserved T3SS components: the needle tip proteins IpaD and IpaB, the needle itself and the intracellular gatekeeper protein MxiC. To further characterize the role of IpaD during activation, we combined random mutagenesis with a genetic screen to identify ipaD mutant strains unable to respond to host cell contact. Class II mutants have an overall defect in secretion induction. They map to IpaD's C‐terminal helix and likely affect activation signal generation or transmission. The Class I mutant secretes translocators prematurely and is specifically defective in IpaD secretion upon activation. A phenotypically equivalent mutant was found in mxiC. We show that IpaD and MxiC act in the same intracellular pathway. In summary, we demonstrate that IpaD has a dual role and acts at two distinct locations during secretion activation.     

The crystal structures of the Salmonella type III secretion system tip protein SipD in complex with deoxycholate and chenodeoxycholate

The type III secretion system (T3SS) is a protein injection nanomachinery required for virulence by many human pathogenic bacteria including Salmonella and Shigella. An essential component of the T3SS is the tip protein and the Salmonella SipD and the Shigella IpaD tip proteins interact with bile salts, which serve as environmental sensors for these enteric pathogens. SipD and IpaD have long central coiled coils and their N-terminal regions form α-helical hairpins and a short helix α3 that pack against the coiled coil. Using AutoDock, others have predicted that the bile salt deoxycholate binds IpaD in a cleft formed by the α-helical hairpin and its long central coiled coil. NMR chemical shift mapping, however, indicated that the SipD residues most affected by bile salts are located in a disordered region near helix α3. Thus, how bile salts interact with SipD and IpaD is unclear. Here, we report the crystal structures of SipD in complex with the bile salts deoxycholate and chenodeoxycholate. Bile salts bind SipD in a region different from what was predicted for IpaD. In SipD, bile salts bind part of helix α3 and the C-terminus of the long central coiled coil, towards the C-terminus of the protein. We discuss the biological implication of the differences in how bile salts interact with SipD and IpaD.     

Assembly of the type III secretion needle complex of Salmonella typhimurium

The type III secretion needle complex (NC) of Salmonella typhimurium is a complex secretory system that functions to translocate virulence proteins into eukaryotic cells. Evolutionarily it is related to bacterial flagella. Assembly of the NC occurs through ordered secretion, polymerization, and assembly, and requires the coordinated expression and association of over 20 different proteins. Recent progress in the understanding of the assembly and architecture of the NC is reviewed.     

Three‐dimensional electron microscopy reconstruction and cysteine‐mediated crosslinking provide a model of the type III secretion system needle tip complex

Type III secretion systems are found in many Gram‐negative bacteria. They are activated by contact with eukaryotic cells and inject virulence proteins inside them. Host cell detection requires a protein complex located at the tip of the device's external injection needle. The Shigella tip complex (TC) is composed of IpaD, a hydrophilic protein, and IpaB, a hydrophobic protein, which later forms part of the injection pore in the host membrane. Here we used labelling and crosslinking methods to show that TCs from a ΔipaB strain contain five IpaD subunits while the TCs from wild‐type can also contain one IpaB and four IpaD subunits. Electron microscopy followed by single particle and helical image analysis was used to reconstruct three‐dimensional images of TCs at ～20 Å resolution. Docking of an IpaD crystal structure, constrained by the crosslinks observed, reveals that TC organisation is different from that of all previously proposed models. Our findings suggest new mechanisms for TC assembly and function. The TC is the only site within these secretion systems targeted by disease‐protecting antibodies. By suggesting how these act, our work will allow improvement of prophylactic and therapeutic strategies.     

The Salmonella type III secretion translocon protein SspC is inserted into the epithelial cell plasma membrane upon infection

Salmonella species translocate effector proteins into the host cell cytoplasm using a type III secretion system (TTSS). The translocation machinery probably contacts the eukaryotic cell plasma membrane to effect protein transfer. Data presented here demonstrate that both SspB and SspC, components of the translocation apparatus, are inserted into the epithelial cell plasma membrane 15 min after Salmonella typhimurium infection. In addition, a yeast two-hybrid interaction between SspC and an eukaryotic intermediate filament protein was identified. Three individual carboxyl-terminal point mutations within SspC that disrupt the yeast two-hybrid interaction were isolated. Strains expressing the mutant SspC alleles were defective for invasion, translocation of effector molecules and membrane localization of SspC. These data indicate that insertion of SspC into the plasma membrane of target cells is required for invasion and effector molecule translocation and that the carboxyl terminus of SspC is essential for these functions.     

The type 3 secretion system requires actin polymerization to open translocon pores

Many bacterial pathogens require a type 3 secretion system (T3SS) to establish a niche. Host contact activates bacterial T3SS assembly of a translocon pore in the host plasma membrane. Following pore formation, the T3SS docks onto the translocon pore. Docking establishes a continuous passage that enables the translocation of virulence proteins, effectors, into the host cytosol. Here we investigate the contribution of actin polymerization to T3SS-mediated translocation. Using the T3SS model organism Shigella flexneri, we show that actin polymerization is required for assembling the translocon pore in an open conformation, thereby enabling effector translocation. Opening of the pore channel is associated with a conformational change to the pore, which is dependent upon actin polymerization and a coiled-coil domain in the pore protein IpaC. Analysis of an IpaC mutant that is defective in ruffle formation shows that actin polymerization-dependent pore opening is distinct from the previously described actin polymerization-dependent ruffles that are required for bacterial internalization. Moreover, actin polymerization is not required for other pore functions, including docking or pore protein insertion into the plasma membrane. Thus, activation of the T3SS is a multilayered process in which host signals are sensed by the translocon pore leading to the activation of effector translocation.     

Crystal structure of PrgI-SipD: insight into a secretion competent state of the type three secretion system needle tip and its interaction with host ligands

Many infectious gram-negative bacteria, including Salmonella typhimurium, require a Type Three Secretion System (T3SS) to translocate virulence factors into host cells. The T3SS consists of a membrane protein complex and an extracellular needle together that form a continuous channel. Regulated secretion of virulence factors requires the presence of SipD at the T3SS needle tip in S. typhimurium. Here we report three-dimensional structures of individual SipD, SipD in fusion with the needle subunit PrgI, and of SipD:PrgI in complex with the bile salt, deoxycholate. Assembly of the complex involves major conformational changes in both SipD and PrgI. This rearrangement is mediated via a π bulge in the central SipD helix and is stabilized by conserved amino acids that may allow for specificity in the assembly and composition of the tip proteins. Five copies each of the needle subunit PrgI and SipD form the T3SS needle tip complex. Using surface plasmon resonance spectroscopy and crystal structure analysis we found that the T3SS needle tip complex binds deoxycholate with micromolar affinity via a cleft formed at the SipD:PrgI interface. In the structure-based three-dimensional model of the T3SS needle tip, the bound deoxycholate faces the host membrane. Recently, binding of SipD with bile salts present in the gut was shown to impede bacterial infection. Binding of bile salts to the SipD:PrgI interface in this particular arrangement may thus inhibit the T3SS function. The structures presented in this study provide insight into the open state of the T3SS needle tip. Our findings present the atomic details of the T3SS arrangement occurring at the pathogen-host interface.     

Protein-peptidoglycan interactions modulate the assembly of the needle complex in the Salmonella invasion-associated type III secretion system

The invasion-associated type III secretion system of Salmonella enterica assembles as a supra-molecular structure, termed needle complex, which spans the bacterial envelope. Here, we present evidence for protein-peptidoglycan interactions that modulate the assembly of this organelle. The presence of major membrane components of the needle complex (PrgH, PrgK and InvG) and InvH, required for efficient assembly of the organelle, was examined in peptidoglycan purified by extensive boiling of bacteria in 4% SDS. InvH, PrgH and PrgK, but not InvG, were detected in this purified material. InvH was present in the peptidoglycan in higher relative amounts than PrgH or PrgK, and was the only protein efficiently bound to peptidoglycan in cross-linking experiments. Analysis in mutants defective for needle complex proteins showed that the needle proteins PrgI and PrgJ and, to a lesser extent, InvH, sustain the association of PrgH and PrgK with peptidoglycan. In contrast, the association of InvH with peptidoglycan did not necessitate other needle complex proteins. Functional analysis showed that the association of InvH, PrgH and PrgK with peptidoglycan is abolished in live bacteria carrying structural modifications in the peptidoglycan. The loss of these interactions caused a marked reduction in the number of needle complexes and, concomitantly, in protein secretion and bacterial invasion of cultured eukaryotic cells. Altogether, these data provide the first evidence for an association between proteins of the Salmonella needle complex and the peptidoglycan. In addition, we demonstrate that these protein-peptidoglycan interactions are critical for an efficient and correct assembly of this specialized organelle.     

Bordetella Bsp22 forms a filamentous type III secretion system tip complex and is immunoprotective in vitro and in vivo

Type III secretion system (T3SS) tip complexes serve as adaptors that bridge the T3SS needle and the pore-forming translocation apparatus. In this report we demonstrate that Bsp22, the most abundantly secreted substrate of the Bordetella T3SS, self-polymerizes to form the Bordetella bronchiseptica tip complex. Bsp22 is required for both T3SS-mediated cytotoxicity against eukaryotic cells and haemoglobin release from erythrocytes. Bacterial two-hybrid analysis and protein pull-down assays demonstrated the ability of Bsp22 to associate with itself and to bind BopD, a component of the Bordetella translocation pore. Immunoblot and cross-linking analysis of secreted proteins or purified Bsp22 showed extensive multimerization which was shown by transmission electron microscopy to lead to the formation of variable length flexible filaments. Immunoelectron microscopy revealed Bsp22 filaments on the surface of bacterial cells. Given its required role in secretion and cell-surface exposure, we tested the protective effects of antibodies against Bsp22 in vitro and in vivo . Polyclonal antisera against Bsp22 fully protected epithelial cells from T3SS-dependent killing and immunization with Bsp22 protected mice against Bordetella infection. Of the approximately 30 genes which encode the Bordetella T3SS apparatus, bsp22 is the only one without characterized orthologues in other well-characterized T3SS loci. A maximum likelihood phylogenetic analysis indicated that Bsp22 defines a new subfamily of T3SS tip complex proteins. Given its immunogenic and immunoprotective properties and high degree of conservation among Bordetella species, Bsp22 and its homologues may prove useful for diagnostics and next-generation subunit vaccines.     

Insertion of the bacterial type III translocon: not your average needle stick

Bacterial type III secretion systems are thought to translocate virulence proteins directly from the bacterial cytoplasm into host cells through a continuous molecular channel. Little is known about how the apparatus itself interacts with membranes and whether insertion of this structure into the host membrane has consequences for the bacteria apart from its beneficial role in delivering virulence proteins. New evidence suggests that membrane insertion of the bacterial type III apparatus might turn on a calcium-dependent signaling pathway resulting in phagolysosomal fusion.     

Endofungal bacterium controls its host by an hrp type III secretion system

Burkholderia rhizoxinica and Rhizopus microsporus form a unique symbiosis in which intracellular bacteria produce the virulence factor of the phytopathogenic fungus. Notably, the host strictly requires endobacteria to sporulate. In this study, we show that the endofungal bacteria possess a type III secretion system (T3SS), which has a crucial role in the maintenance of the alliance. Mutants defective in type III secretion show reduced intracellular survival and fail to elicit sporulation of the host. Furthermore, genes coding for T3SS components are upregulated during cocultivation of the bacterial symbiont with their host. This is the first report on a T3SS involved in bacterial–fungal symbiosis. Phylogenetic analysis revealed that the T3SS represents a prototype of a clade of yet uncharacterized T3SSs within the hrp superfamily of T3SSs from plant pathogenic microorganisms. In a control experiment, we demonstrate that under laboratory conditions, rhizoxin production was not required for establishment of the symbiotic interaction.