Influence of surface cell structures on physicochemical properties of Escherichia coli

The partition of cells in a polyethylene glycol-dextran two phase system was used to compare the relative hydrophobicity of E. coli strains expressing different surface structures. The role of fimbriae and surface antigens on the behavior partition was investigated. The strains expressing PAP fimbriae and/or O-antigen showed a higher surface hydrophobicity than strains which express only type 1 fimbriae and/or R-antigen. No relation was found between K and H antigen and hydrophobicity measurements. The influence of surface structures on electrophoretic mobility has been evaluated. The polysaccharide capsules of AL 213 and AL 499 strains generated a high EPM. For non capsulated E. coli the EPM of rough strains (AL 46, 382) is higher than smooth strain (AL52).     

Identification of surface residues in the trp repressor of Escherichia coli

A subset of the spin systems assigned in the 1H NMR spectrum of the trp repressor in the first paper in this series (our penultimate preceding paper in this journal) can be identified as surface or buried residues on the basis of four independent types of measurement: selective spin-lattice relaxation times; the dependence of line widths on temperature and the concentration of manganous ion; fluorescence quenching; and titration behaviour. Criteria are developed for distinguishing surface and buried residues. The significance for the function of DNA binding proteins is discussed.     

Effects of subinhibitory concentrations of nitroxoline on the surface properties of Escherichia coli

Nitroxoline (5-nitro-8-quinolinol; NIQ) at subinhibitory concentrations (sub-MIC) decreased the adherence of uropathogenicEscherichia coli to catheter surface and significantly enhanced cell surface hydrophobicity. The surface hydrophobicity increased in the presence of sub-MIC of NIQ and also in an excess of Mg²⁺. The effect of NIQ on the cell surface was not related to the bacteriostatic effect of this agent. The increase in nitrogen and decrease in phosphate content in the cell surface was found in the presence of NIQ. NIQ did not inhibit the expression of fimbriae.     

flu, a metastable gene controlling surface properties of Escherichia coli.

flu, a gene of Escherichia coli K-12, was discovered and mapped between his and shiA. It is shown that flu is a metastable gene that changes frequently between the flu+ and flu states. flu+ variants give stable homogeneous suspensions, are piliated, and form glossy colonies. flu variants aggregate, fluff and sediment from suspensions, are nonpiliated, and form frizzy colonies. flu+ and flu variants can be isolated from most strains. Implications of these observations are discussed, and it is demonstrated that flu+ variants of strain P678-54 yield three times more minicells than flu variants.     

Identification of phosphoproteins in Escherichia coli

The substrates of ion- and lipld-stimulated protein kinase activity in extracts of Escherichia coli were purified by chromatography. Subsequent N-terminal sequencing suggests that these substrates include the following: a novel 80kDa protein co-purifying with RNA polymerase but partially homologous to elongation factor G; a protein with an apparent molecular weight of 65kDa identified as the ribosomal protein S1; and a 32 kDa protein identified as succinyl CoA synthetase, a key enzyme in the tricarboxylic acid cycle. The phosphorylation of these three proteins was markedly stimulated by the addition of manganese, and occurred on threonine, serine or tyrosine residues as indicated by the stability of the phosphoresidues during acid treatment. In addition, a calcium-stimulated protein of 70kDa was identified as the heat-shook protein DnaK, and a 17kDa lipid-stimulated phosphoprotein as nucleotide diphosphate kinase.     

Cell surface properties of organic solvent-tolerant mutants of Escherichia coli K-12.

In this study, we examined cell surface properties of mutants of Escherichia coli for which organic solvent tolerance levels were elevated. The cell surface of each mutant was less hydrophobic than that of the parent, probably due to an increase in lipopolysaccharide content. OmpF synthesis was repressed in the mutants. Organic solvent bound readily to viable E. coli cells in response to the polarity of the solvent. The mutants were bound less abundantly with the organic solvent than was the parent.     

Modeling surface growth of Escherichia coli on agar plates

Surface growth of Escherichia coli cells on a membrane filter placed on a nutrient agar plate under various conditions was studied with a mathematical model. The surface growth of bacterial cells showed a sigmoidal curve with time on a semilogarithmic plot. To describe it, a new logistic model that we presented earlier (H. Fujikawa et al., Food Microbiol. 21:501-509, 2004) was modified. Growth curves at various constant temperatures (10 to 34 degrees C) were successfully described with the modified model (model III). Model III gave better predictions of the rate constant of growth and the lag period than a modified Gompertz model and the Baranyi model. Using the parameter values of model III at the constant temperatures, surface growth at various temperatures was successfully predicted. Surface growth curves at various initial cell numbers were also sigmoidal and converged to the same maximum cell numbers at the stationary phase. Surface growth curves at various nutrient levels were also sigmoidal. The maximum cell number and the rate of growth were lower as the nutrient level decreased. The surface growth curve was the same as that in a liquid, except for the large curvature at the deceleration period. These curves were also well described with model III. The pattern of increase in the ATP content of cells grown on a surface was sigmoidal, similar to that for cell growth. We discovered several characteristics of the surface growth of bacterial cells under various growth conditions and examined the applicability of our model to describe these growth curves.     

Impact of cranberry on Escherichia coli cellular surface characteristics

The anti-adhesive effects of cranberry have been attributed to both interactions of its components with the surface of bacterial cells and to inhibition of p-fimbriae expression. Previous reports also suggested that the presence of cranberry juice changed the Gram stain characteristics of Escherichia coli. Here, we show that the morphology of E. coli is changed when grown in the presence of juice or extract from Vaccinium macrocarpon (cranberry). Gene expression analysis indicates the down regulation of flagellar basal body rod and motor proteins. Consistent with this finding and previous reports, the SEM images indicate a decrease in the visible p-fimbriae. The iodine used in Gram-staining protocols was found to interact differently with the bacterial membrane when cells were cultured in spiked media. Slight alterations in the Gram stain protocol demonstrated that culturing in the presence of cranberry juice does not change the Gram stain characteristics contradicting other reports.     

Identification of pseudouridine methyltransferase in Escherichia coli

In ribosomal RNA, modified nucleosides are found in functionally important regions, but their function is obscure. Stem–loop 69 of Escherichia coli 23S rRNA contains three modified nucleosides: pseudouridines at positions 1911 and 1917, and N3 methyl-pseudouridine (m³Ψ) at position 1915. The gene for pseudouridine methyltransferase was previously not known. We identified E. coli protein YbeA as the methyltransferase methylating Ψ1915 in 23S rRNA. The E. coli ybeA gene deletion strain lacks the N3 methylation at position 1915 of 23S rRNA as revealed by primer extension and nucleoside analysis by HPLC. Methylation at position 1915 is restored in the ybeA deletion strain when recombinant YbeA protein is expressed from a plasmid. In addition, we show that purified YbeA protein is able to methylate pseudouridine in vitro using 70S ribosomes but not 50S subunits from the ybeA deletion strain as substrate. Pseudouridine is the preferred substrate as revealed by the inability of YbeA to methylate uridine at position 1915. This shows that YbeA is acting at the final stage during ribosome assembly, probably during translation initiation. Hereby, we propose to rename the YbeA protein to RlmH according to uniform nomenclature of RNA methyltransferases. RlmH belongs to the SPOUT superfamily of methyltransferases. RlmH was found to be well conserved in bacteria, and the gene is present in plant and in several archaeal genomes. RlmH is the first pseudouridine specific methyltransferase identified so far and is likely to be the only one existing in bacteria, as m³Ψ1915 is the only methylated pseudouridine in bacteria described to date.     

Identification of the ubiD gene on the Escherichia coli chromosome

The open reading frame at 86.7 min on the Escherichia coli chromosome, "yigC," complemented a ubiD mutant strain, AN66, indicating that yigC is the ubiD gene. The gene product, a 497-amino-acid-residue protein, showed extensive homology to the UPF 00096 family of proteins in the Swiss-Prot database.     

Decorating microbes: surface display of proteins on Escherichia coli

Bacterial surface display entails the presentation of recombinant proteins or peptides on the surface of bacterial cells. Escherichia coli is the most frequently used bacterial host for surface display and, as such, a variety of E. coli display systems have been described that primarily promote the surface exposure of peptides and small proteins. By contrast, display systems based on autotransporter proteins (ATs) and ice nucleation protein (INP) are excellent systems for the display of large and complex proteins, and are therefore of considerable biotechnological relevance. Here, we review recent advances in AT and INP-mediated display and their biotechnological applications. Additionally, we discuss several promising alternative display methods, as well as novel bacterial host organisms.     

Display of green fluorescent protein on Escherichia coli cell surface

In this study, expression of green fluorescence protein (GFP) on the external surface of Escherichia coli was achieved by construction of a fusion protein between Lpp-OmpA hybrid and a GFP variant, GFPmut2. The GFP was fused in frame to the carboxyl-terminus of Lpp-OmpA fusion previously shown to direct various other heterologous proteins to E. coli cell surface. Western blot analysis of membrane fractions identified the Lpp-OmpA-GFP fusion protein with the expected size (43 kDa). Immunofluorescence microscopy, immunoelectron microscopy, protease and extracellular pH sensitivity assays further confirmed that GFP is anchored on the outer membrane. The GFP displayed on the E. coli outer surface retained its fluorescence and was not susceptible to the indigenous outer membrane protease OmpT even though there are two putative OmpT proteolytic sites present in GFP. Optimization of the expression conditions was conducted using fluorometry, eliminating cumbersome immuno-labeling procedures. Surface-displayed GFP could be used in a variety of applications including screening of polypeptide libraries, development of live vaccines, construction of whole cell allosteric biosensors, and signal transduction studies.     

Identification of cultivation condition to produce correctly folded form of a malaria vaccine based on Plasmodium falciparum merozoite surface protein-1 in Escherichia coli

The C-terminal, 19-kDa domain of Plasmodium falciparum merozoite surface protein-1 (PfMSP-1₁₉) is among the leading vaccine candidate for malaria due to its essential role in erythrocyte invasion by the parasite. We designed a synthetic gene for optimal expression of recombinant PfMSP-1₁₉ in Escherichia coli and developed a scalable process to obtain high-quality PfMSP-1₁₉. The synthetic gene construct yielded a fourfold higher expression level of PfMSP-1₁₉ in comparison to the native gene construct. Optimization of cultivation conditions in the bioreactor indicated important role of yeast extract and substrate feeding strategy for obtaining enhanced expression of soluble and correctly folded PfMSP-1₁₉. It was observed that the higher expression level of PfMSP-1₁₉ was essentially associated with the generation of higher level of incorrectly folded PfMSP-1₁₉. A simple purification procedure comprising metal affinity and ion exchange chromatography was developed to purify correctly folded form of PfMSP-1₁₉ from cell lysate. Biochemical and biophysical characterization of purified PfMSP-1₁₉ suggested that it was highly pure, homogeneous, and correctly folded.     

Identification of Escherichia coli and Bacillus stearothermophilus ribosomal protein binding sites on Escherichia coli 5S RNA.

Summary E. coli [³²P]-labelled 5S RNA was complexed with E. coli and B. stearothermophilus 50S ribosomal proteins. Limited T₁ RNase digestion of each complex yielded three major fragments which were analysed for their sequences and rebinding of proteins. The primary binding sites for the E. coli binding proteins were determined to be sequences 18 to 57 for E-L5, 58 to 100 for E-L18 and 101 to 116 for E-L25. Rebinding experiments of purified E. coli proteins to the 5S RNA fragments led to the conclusion that E-L5 and E-L25 have secondary binding sites in the section 58 to 100, the primary binding site for E-L18. Since B. stearothermophilus proteins B-L5 and BL22 were found to interact with sequences 18 to 57 and 58 to 100 it was established that the thermophile proteins recognize and interact with RNA sequences similar to those of E. coli. Comparison of the E. coli 5S RNA sequence with those of other prokaryotic 5S RNAs reveals that the ribosomal proteins interact with the most conserved sections of the RNA.Paper number 12 on structure and function of 5S RNA.Preceding paper: Wrede, P. and Erdmann, V.A. Proc. Natl. Acad. Sci. USA 74, 2706–2709 (1977)