Quantification of hydrogen peroxide and glucose using 3-methyl-2-benzothiazolinonehydrazone hydrochloride with 10,11-dihydro-5H-benz(b,f)azepine as chromogenic probe

A sensitive, selective, and rapid enzymatic method is proposed for the quantification of hydrogen peroxide (H₂O₂) using 3-methyl-2-benzothiazolinonehydrazone hydrochloride (MBTH) and 10,11-dihydro-5H-benz(b,f)azepine (DBZ) as chromogenic cosubstrates catalyzed by horseradish peroxidase (HRP) enzyme. MBTH traps free radical released during oxidation of H₂O₂ by HRP and gets oxidized to electrophilic cation, which couples with DBZ to give an intense blue-colored product with maximum absorbance at 620 nm. The linear response for H₂O₂ is found between 5 × 10⁻⁶ and 45 × 10⁻⁶ mol L⁻¹ at pH 4.0 and a temperature of 25 °C. Catalytic efficiency and catalytic power of the commercial peroxidase were found to be 0.415 × 10⁶ M⁻¹ min⁻¹ and 9.81 × 10⁻⁴ min⁻¹, respectively. The catalytic constant (k_cat) and specificity constant (k_cat/K_m) at saturated concentration of the cosubstrates were 163.2 min⁻¹ and 4.156 × 10⁶ L mol⁻¹ min⁻¹, respectively. This method can be incorporated into biochemical analysis where H₂O₂ undergoes catalytic oxidation by oxidase. Its applicability in the biological samples was tested for glucose quantification in human serum.     

Laccase-catalyzed oxidation of phenolic compounds in organic media

Rhus vernificera laccase-catalyzed oxidation of phenolic compounds, i.e., (+)-catechin, (−)-epicatechin and catechol, was carried out in selected organic solvents to search for the favorable reaction medium. The investigation on reaction parameters showed that optimal laccase activity was obtained in hexane at 30 °C, pH 7.75 for the oxidation of (+)-catechin as well as for (−)-epicatechin, and in toluene at 35 °C, pH 7.25 for the oxidation of catechol. E_a and Q₁₀ values of the biocatalysis in the reaction media of the larger log p solvents like isooctane and hexane were relatively higher than those in the reaction media of lower log p solvents like toluene and dichloromethane. Maximum laccase activity in the organic media was found with 6.5% of buffer as co-solvent. A wider range of 0–28 μg protein/ml in hexane than that of 0–16.7 μg protein/ml in aqueous medium was observed for the linear increasing conversion of (+)-catechin. The kinetic studies revealed that in the presence of isooctane, hexane, toluene and dichloromethane, the K_m values were 0.77, 0.97, 0.53 and 2.9 mmol/L for the substrate of (+)-catechin; 0.43, 0.34, 0.14 and 3.4 mmol/L for (−)-epicatechin; 2.9, 1.8, 0.61 and 1.1 mmol/L for catechol, respectively, while the corresponding V_max values were 2.1 × 10⁻², 2.3 × 10⁻², 0.65 × 10⁻² and 0.71 × 10⁻² δA/μg protein min); 1.8 × 10⁻², 0.88 × 10⁻², 0.19 × 10⁻² and 1.0 × 10⁻² δA/μg protein min); 0.48 × 10⁻², 0.59 × 10⁻², 0.67 × 10⁻² and 0.54 × 10⁻² δA/μg protein min), respectively. FT-IR indicated the formation of probable dimer from (+)-catechin in organic solvent. These results suggest that this laccase has higher catalytic oxidation capacity of phenolic compounds in suitable organic media and favorite oligomers could be obtained.     

Graft copolymerization of N-vinylformamide onto sodium carboxymethylcellulose and study of its swelling, metal ion sorption and flocculation behaviour

The present paper reports the graft copolymerization of N-vinylformamide onto sodium carboxymethylcellulose by free radical polymerization using potassium peroxymonosulphate/thiourea redox system in an inert atmosphere. The reaction conditions for maximum grafting have been optimized by varying the reaction variables, including the concentration of N-vinylformamide (12.0 × 10⁻²–28.0 × 10⁻² mol dm⁻³), potassium peroxymonosulphate (4.0 × 10⁻³–12.0 × 10⁻³ mol dm⁻³), thiourea (1.2 × 10⁻³–4.4 × 10⁻³ mol dm⁻³), sulphuric acid (2.0 × 10⁻³–10.0 × 10⁻³ mol dm⁻³), sodium carboxymethylcellulose (0.2–1.8 g dm⁻³) along with time duration (60–180 min) and temperature (25–45° C). Water swelling capacity, metal ion sorption and flocculation studies of synthesized graft copolymer have been performed with respect to the parent polymer. The graft copolymer has been characterized by FTIR spectroscopy and thermogravimetric analysis.     

Entropy decrease associated to solute compartmentalization in the cell

We have deduced equations to quantify the entropy associated to the compartmentalization of components in eukaryotic cells as a function of cell and compartment volumes, and of the concentration of solutes. On the basis of known and plausible values of volume and solute concentrations and the deduced equations, we estimate that the contribution of compartmentalization to the decrease of entropy is approximately −14.4 × 10⁻¹⁴ J K⁻¹ cell⁻¹ (−0.7 J K⁻¹ L⁻¹) in the case of Saccharomyces cerevisiae, a typical eukaryotic cell, and approximately −49.6 × 10⁻¹⁴ J K⁻¹ cell⁻¹ (−1.0 J K⁻¹ L⁻¹) in the more complex Chlamydomonas reinhardtii. When compared with other potential contributing factors, such as the informational entropy of DNA and the conformational entropy of proteins, compartmentalization appears as an essential development that significantly decreased the entropy of living cells during biological evolution.     

Immobilization of soybean (Glycine max) urease on alginate and chitosan beads showing improved stability: Analytical applications

The soybean (Glycine max) urease was immobilized on alginate and chitosan beads and various parameters were optimized and compared. The best immobilization obtained were 77% and 54% for chitosan and alginate, respectively. A 2% chitosan solution (w/v) was used to form beads in 1N KOH. The beads were activated with 1% glutaraldehyde and 0.5 mg protein was immobilized per ml of chitosan gel for optimum results. The activation and coupling time were 6 h and 12 h, respectively. Further, alginate and soluble urease were mixed to form beads and final concentrations of alginate and protein in beads were 3.5% (w/v) and 0.5 mg/5 ml gel. From steady-state kinetics, the optimum temperature for urease was 65 °C (soluble), 75 °C (chitosan) and 80 °C (alginate). The activation energies were found to be 3.68 kcal mol⁻¹, 5.02 kcal mol⁻¹, 6.45 kcal mol⁻¹ for the soluble, chitosan- and alginate-immobilized ureases, respectively. With time-dependent thermal inactivation studies, the immobilized urease showed improved stability at 75 °C and the t_1/2 of decay in urease activity was 12 min, 43 min and 58 min for soluble, alginate and chitosan, respectively. The optimum pH of urease was 7, 6.2 and 7.9 for soluble, alginate and chitosan, respectively. A significant change in K_m value was noticed for alginate-immobilized urease (5.88 mM), almost twice that of soluble urease (2.70 mM), while chitosan showed little change (3.92 mM). The values of V_max for alginate-, chitosan-immobilized ureases and soluble urease were 2.82 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, 2.65 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein and 2.85 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, respectively. By contrast, reusability studies showed that chitosan–urease beads can be used almost 14 times with only 20% loss in original activity while alginate–urease beads lost 45% of activity after same number of uses. Immobilized urease showed improved stability when stored at 4 °C and t_1/2 of urease was found to be 19 days, 80 days and 121 days, respectively for soluble, alginate and chitosan ureases. The immobilized urease was used to estimate the blood urea in clinical samples. The results obtained with the immobilized urease were quite similar to those obtained with the autoanalyzer^®. The immobilization studies have a potential role in haemodialysis machines.     

Interactions between Prorocentrum donghaiense Lu and Scrippsiella trochoidea (Stein) Loeblich III under laboratory culture

Interactions between Prorocentrum donghaiense Lu and Scrippsiella trochoidea (Stein) Loeblich III, two species of causative bloom dinoflagellates in China, were investigated using bi-algal cultures under controlled laboratory conditions. The growth of P. donghaiense and S. trochoidea were significantly suppressed when the initial cell densities were set at 1.9 × 10⁴ cells mL⁻¹ or 1.9 × 10⁵ cells mL⁻¹ for P. donghaiense and 1.0 × 10⁴ cells mL⁻¹ for S. trochoidea when the initial size/density ratio was 1:1 or 10:1, respectively, but no out-competement was observed in either bi-algal culture by the end. The simultaneous assay on the culture filtrate showed that P. donghaiense filtrate prepared at a lower initial density (1.9 × 10⁴ cells mL⁻¹) stimulated the co-cultured S. trochoidea at a density of 1.0 × 10⁴ cells mL⁻¹, but filtrate at a higher density (1.9 × 10⁵ cells mL⁻¹) depressed its growth. Differently, the filtrate of S. trochoidea at a density of 1.0 × 10⁴ cells mL⁻¹ significantly suppressed the growth of P. donghaiense at a density of 1.9 × 10⁴ cells mL⁻¹, but had little stimulatory effect on P. donghaiense at a density of 1.9 × 10⁵ cells mL⁻¹compared to the control (P > 0.05). It is likely that these two species of microalgae interact with each other mainly by releasing allelochemical substance(s) into the culture medium, and a direct cell-to-cell contact was not necessary for their mutual interaction. We then quantify their interactions in the bi-algal culture by using a mathematical model. The estimated parameters from the model showed that the inhibition exerted by S. trochoidea on P. donghaiense was about 43 and 24 times stronger than the inhibitory effect that P. donghaiense exerted on S. trochoidea when the initial size/density were 1:1 and 10:1, respectively. S. trochoidea seemed to have a survival strategy that was superior to P. donghaiense in the bi-algal culture under controlled laboratory conditions. We also observed a closely positive relationship between the initial cell density and its effect on the co-cultured microalga by measuring the fluorenscence: filtrate prepared from higher initial cell density had stronger interference on the co-cultured microalga. Moreover, pre-treated under different temperature conditions (30 °C, 60 °C and 100 °C) would significantly changed the effect of culture filtrate on the co-cultured microalga. Result inferred that P. donghaiense or S. trochoidea would release allelochemicals into the bi-algal culture medium and the allelochemicals might be a mixture with temperature-sensitive components in it.     

Using porphyritic andesite as a new additive for improving hydrolysis and acidogenesis of solid organic wastes

The effects of porphyritic andesite on the hydrolysis and acidogenesis of solid organic wastes were investigated by batch and continuous experiments using a rotational drum fermentation system. The results of the batch experiment show that if porphyritic andesite (1%, 3%, and 5% reactants) is added initially, the pH level increases and hydrolysis and acidogenesis are accelerated. The highest surface based hydrolysis constant (26.4 × 10⁻³ kg m⁻² d⁻¹) and volatile solid degradation ratio (43.3%) were obtained at a 1% porphyritic andesite addition. In the continuous experiment, porphyritic andesite elevated the first order hydrolysis constant from 13.10 × 10⁻³ d⁻¹ to 18.82 × 10⁻³ d⁻¹. A particle mean diameter reduction rate of 33.05 μm/d and a volatile solid degradation rate of 3.53 g/L d⁻¹ were obtained under the hydraulic retention time of 4, 8, 12 and 16 d.     

o-Phthalaldehyde–N-acetylcysteine polyamine derivatives: formation and stability in solution and in C18 supports

A comparative study of different derivatization procedures has been performed in order to improve the stability of the reaction products o-phthalaldehyde–N-acetylcysteine (OPA–NAC) polyamines. Procedures such as solution derivatization, solution derivatization followed by retention on a packing support, derivatization on different packing supports and on-column derivatization, have been optimized and compared. The degradation rate constant (k) of the derivative was dependent on the procedure used and on the analyte. For the spermine (the most unstable isoindol tested) k was 8±2×10⁻² min⁻¹ in solution versus 7.7±1.1×10⁻⁴ min⁻¹ on the (C₁₈) solid support. The results obtained showed that forming the derivative on the packing support (C₁₈) gave the best results following this procedure: conditioning the cartridges with borate buffer (1 ml, 0.5 M, pH 8), retention of the analyte, addition of 0.8 ml of OPA–NAC reagent, 0.2 ml borate buffer 0.8 M (pH 8) and elution of the isoindol with 3 ml of MeOH–borate buffer (9:1). The different derivatization procedures have been used to study the stability of the reaction products OPA–NAC polyamines formed in urine matrix using spermine as model compound. Similar results were obtained for standard solutions and urine samples.     

ICChI, a glycosylated chitinase from the latex of Ipomoea carnea

A multi-functional enzyme ICChI with chitinase/lysozyme/exochitinase activity from the latex of Ipomoea carnea subsp. fistulosa was purified to homogeneity using ammonium sulphate precipitation, hydrophobic interaction and size exclusion chromatography. The enzyme is glycosylated (14–15%), has a molecular mass of 34.94 kDa (MALDI–TOF) and an isoelectric point of pH 5.3. The enzyme is stable in pH range 5.0–9.0, 80 °C and the optimal activity is observed at pH 6.0 and 60 °C. Using p-nitrophenyl-N-acetyl-β-d-glucosaminide, the kinetic parameters K_m, V_max, K_cat and specificity constant of the enzyme were calculated as 0.5 mM, 2.5 × 10⁻⁸ mol min⁻¹ μg enzyme⁻¹, 29.0 s⁻¹ and 58.0 mM⁻¹ s⁻¹ respectively. The extinction coefficient was estimated as 20.56 M⁻¹ cm⁻¹. The protein contains eight tryptophan, 20 tyrosine and six cysteine residues forming three disulfide bridges. The polyclonal antibodies raised and immunodiffusion suggests that the antigenic determinants of ICChI are unique. The first fifteen N-terminal residues G–E–I–A–I–Y–W–G–Q–N–G–G–E–G–S exhibited considerable similarity to other known chitinases. Owing to these unique properties the reported enzyme would find applications in agricultural, pharmaceutical, biomedical and biotechnological fields.     

Occurrence and toxicity of Amphidinium carterae Hulburt in the North Arabian Sea

The occurrence and toxicity of Amphidinium carterae Hulburt is hereby reported for the first time from the North Arabian Sea on the coast of Pakistan. The concentrations of 1.2 × 10⁴ cells ml⁻¹ were found in intertidal pools that were also inhabited by the brown macroalga Sargassum wightii. Both wild and cultured A. carterae cells were tested for ciguatera toxicity through exposure to brine shrimp nauplii (Artemia salina) and albino mice. Although the brine shrimp did not appear to be affected mortalities in mice ranged between 13 and 16% at doses of 7.2 × 10⁴ and 2.5 × 10⁵ cells ml⁻¹, respectively. When mice were affected pharmacological effects such as muscle contraction in lower back area, increased respiration, immobility and paralysis in hind limbs were observed for 2 h. These effects appeared to be reversible and gradually disappeared within 24 h.     

Quantitative detection of the oil-degrading bacterium Acinetobacter sp. strain MUB1 by hybridization probe based real-time PCR

Quantitative detection of the oil-degrading bacterium Acinetobacter sp. strain MUB1 was performed using the SoilMaster^™ DNA Extraction Kit (Epicentre, Madison, Wisconsin) and hybridization probe based real-time PCR. The detection target was the alkane hydroxylase gene (alkM). Standard curve construction showed a linear relation between log values of cell concentrations and real-time PCR threshold cycles over five orders of magnitude between 5.4±3.0×10⁶ and 5.4±3.0×10² CFU ml⁻¹ cell suspension. The detection limit was about 540 CFU ml⁻¹, which was ten times more sensitive than conventional PCR. The quantification of Acinetobacter sp. strain MUB1 cells in soil samples resulted in 46.67%, 82.41%, and 87.59% DNA recovery with a detection limit of 5.4±3.0×10⁴ CFU g⁻¹ dry soil. In this study, a method was developed for the specific, sensitive, and rapid quantification of the Acinetobacter sp. strain MUB1 in soil samples.     

In vitro cytogenetic effects of Andrographis paniculata (kalmegh) on arsenic

In vitro effects of arsenic in human peripheral lymphocytes (HPL) at three different doses – 3.6×10⁻⁴, 1.4×10⁻³ and 0.72×10⁻³ μM for 24 h before harvesting on sister chromatid exchanges (SCE), Cell cycle proliferative index/replicative index (CCPI/RI), %M₁, %M₂ and %M₃, population doubling time (PDT) and average generation time (AGT) were examined. Andrographis paniculata (commonly referred to as ‘kalmegh’) has been used for centuries in traditional Indian and Chinese herbal medicine as a safe, natural folk remedy for assorted health concerns. In the present study, kalmegh (0.01 μg/7 ml culture media) was used along with the highest dose of arsenic; the results showed that arsenic induced increase in these genotoxic endpoints were fairly diminished by kalmegh. In addition, mutagenic in vitro effect of ethyl methanesulphonate (EMS) was used as a positive control in this study. It is thus concluded from this study that Andrographis has a protective role in arsenic toxicity.     

Nitrogen utilization by the raphidophyte Heterosigma akashiwo: Growth and uptake kinetics in laboratory cultures

The nitrogen uptake and growth capabilities of the potentially harmful, raphidophycean flagellate Heterosigma akashiwo (Hada) Sournia were examined in unialgal batch cultures (strain CCMP 1912). Growth rates as a function of three nitrogen substrates (ammonium, nitrate and urea) were determined at saturating and sub-saturating photosynthetic photon flux densities (PPFDs). At saturating PPFD (110 μE m⁻² s⁻¹), the growth rate of H. akashiwo was slightly greater for cells grown on NH₄⁺ (0.89 d⁻¹) compared to cells grown on NO₃⁻ or urea, which had identical growth rates (0.82 d⁻¹). At sub-saturating PPFD (40 μE m⁻² s⁻¹), both urea- and NH₄⁺-grown cells grew faster than NO₃⁻-grown cells (0.61, 0.57 and 0.46 d⁻¹, respectively). The N uptake kinetic parameters were investigated using exponentially growing batch cultures of H. akashiwo and the ¹⁵N-tracer technique. Maximum specific uptake rates (V_max) for unialgal cultures grown at 15 °C and saturating PPFD (110 μE m⁻² s⁻¹) were 28.0, 18.0 and 2.89 × 10⁻³ h⁻¹ for NH₄⁺, NO₃⁻ and urea, respectively. The traditional measure of nutrient affinity—the half saturation constants (K_s) were similar for NH₄⁺ and NO₃⁻ (1.44 and 1.47 μg-at N L⁻¹), but substantially lower for urea (0.42 μg-at N L⁻¹). Whereas the α parameter (α = V_max/K_s), which is considered a more robust indicator for substrate affinity when substrate concentrations are low (<K_s), were 19.4, 12.2 and 6.88 × 10⁻³ h⁻¹/(μg-at N L⁻¹) for NH₄⁺, NO₃⁻ and urea, respectively. These laboratory results demonstrate that at both saturating and sub-saturating N concentrations, N uptake preference follows the order: NH₄⁺ > NO₃⁻ > urea, and suggests that natural blooms of H. akashiwo may be initiated or maintained by any of the three nitrogen substrates examined.     

Synthesis, characterization and applications of graft copolymer (Chitosan-g-N,N-dimethylacrylamide)

An unreported graft copolymer of N,N-dimethylacrylamide (DMA) with chitosan has been synthesized under nitrogen atmosphere using peroxymonosulphate/mandelic acid redox pair. The effect of reaction conditions on grafting parameters i.e. grafting ratio, efficiency, conversion, add on and homopolymer has been studied. Experimental results show that maximum grafting has been obtained at 1.0 g dm⁻³ concentration of chitosan, 30 × 10⁻² mol dm⁻³ concentration of N,N-dimethylacrylamide and 7.0 × 10⁻³ mol dm⁻³ concentration of hydrogen ion. It has also been observed that grafting ratio, add on, conversion and efficiency increase upto 3.2 × 10⁻³ mol dm⁻³ of mandelic acid, 12.0 × 10⁻³ mol dm⁻³ of potassium peroxymonosulphate, 150 min of time and 40 °C of temperature. Grafted polymer has been characterized by FTIR spectroscopy and thermogravimetric analysis. Water swelling capacity of chitosan-g-N,N-dimethylacrylamide has been determined. It has been observed that the graft copolymer is thermally more stable than parent backbone.     

Biosorption of nonylphenol on dead biomass of Rhizopus arrhizus encapsulated in chitosan beads

The nonylphenol (NP) biosorption and desorption potential for fungal biomass used under batch conditions was investigated using kinetics and isotherm models. Fungal biomass of Rhizopus arrhizus TISTR 3610 exhibited preferential uptake of NP, an endocrine disrupting chemicals. Sporangiospores, asexual spores, were immobilised in chitosan beads. The biosorption data of NP on the moist heat inactivated R. arrhizus–chitosan beads were analyzed using four popular adsorption isotherms and, by using non-linear least-regression with the solver add-in in Microsoft Excel, correlated in order with the Fritz–Schluender > Redlich–Peterson > Freundlich > Langmuir isotherms. The pseudo first-order kinetics was found to have the best fit with the experimental data. The diffusivity of NP in the R. arrhizus–chitosan beads was calculated using the shrinking core model, and the diffusivity values were in the ranges of 2.3736 × 10⁻⁴–1.8950 × 10⁻⁴ cm² s⁻¹. Desorption to recover the adsorbed NP from the beads was performed in methanol and was best described using a pseudo second-order kinetic model.     

Molecular Modeling Study for Interaction between Bacillus subtilis Obg and Nucleotides

The bacterial Obg proteins (Spo0B-associated GTP-binding protein) belong to the subfamily of P-loop GTPase proteins that contain two equally and highly conserved domains, a C-terminal GTP binding domain and an N-terminal glycine-rich domain which is referred as the “Obg fold” and now it is considered as one of the new targets for antibacterial drug. When the Obg protein is associated with GTP, it becomes activated, because conformation of Obg fold changes due to the structural changes of GTPase switch elements in GTP binding site. In order to investigate the effects and structural changes in GTP bound to Obg and GTPase switch elements for activation, four different molecular dynamics (MD) simulations were performed with/without the three different nucleotides (GTP, GDP, and GDP + Pi) using the Bacillus subtilis Obg (BsObg) structure. The protein structures generated from the four different systems were compared using their representative structures. The pattern of C_α-C_α distance plot and angle between the two Obg fold domains of simulated apo form and each system (GTP, GDP, and GDP+Pi) were significantly different in the GTP-bound system from the others. The switch 2 element was significantly changed in GTP-bound system. Also root-mean-square fluctuation (RMSF) analysis revealed that the flexibility of the switch 2 element region was much higher than the others. This was caused by the characteristic binding mode of the nucleotides. When GTP was bound to Obg, its γ-phosphate oxygen was found to interact with the key residue (D212) of the switch 2 element, on the contrary there was no such interaction found in other systems. Based on the results, we were able to predict the possible binding conformation of the activated form of Obg with L13, which is essential for the assembly with ribosome.     

Activity and efficacy of Bacillus subtilis strain NJ-18 against rice sheath blight and Sclerotinia stem rot of rape

A strain of Bacillus subtilis (NJ-18) with broad antimicrobial activity was screened in the laboratory and in the field. NJ-18 inhibited the in vitro radial extension of hyphae of the phytopathogenic fungi Rhizoctonia solani and Sclerotinia sclerotiorum. The bacterium apparently produced antifungal metabolites that diffused through the agar and caused abnormal swelling of hyphae. The in vitro data and observations indicated that one of the mechanisms of inhibition by NJ-18 is antibiosis. In field experiments for control of sheath blight of rice, fermentation of NJ-18 at 5.0 × 10⁷ cfu ml⁻¹ significantly reduced disease incidence and severity; NJ-18 alone or combined with 50% kresoxim-methyl treatment at 225 g ai ha⁻¹ provided better control than 50% kresoxim-methyl at 225 g ai ha⁻¹ or Jinggangmycin at 120 g ai ha⁻¹, and control by NJ-18 alone was as high as 100.0%. In field experiments for control of Sclerotinia stem rot of rape, fermentation of NJ-18 at 1.0 × 10⁷ cfu ml⁻¹ again significantly reduced disease incidence and severity; control by NJ-18 was as high as 77.1% and was comparable with control by 46% dimethachlon and better than control by 50% carbendazim at 750 g ai ha⁻¹. We conclude that strain NJ-18 of B. subtilis is a promising biological control agent and should be further studied and tested for control of sheath blight of rice, Sclerotinia stem rot of rape, and other diseases.     

Characterization of galactomannans isolated from legume endosperms of Caesalpinioideae and Faboideae subfamilies by multidetection aqueous SEC

Galactomannans isolated from legume seed endosperms, including those of commercial interest, have been characterized by multidetection aqueous SEC. Galactomannans derived from seeds of the Faboideae subfamily had substantially higher M_w than those from Caesalpinioideae seeds (M_w,Fab = 2.4–3.1 × 10⁶ g/mol, M_w,Caes. = 0.86–2.1 × 10⁶ g/mol) and within the latter botanical subfamily, an apparent correlation between M_w and the degree of galactose substitution DG was found. The molar mass distributions were unimodal and differed primarily by a scale factor, with distributional widths narrower than a true Flory ‘most-probable distribution’; good fits to Schulz–Zimm model were obtained. Across subfamilies no differences were found in the exponents of [η]–M and R_v–M relationships (0.61 ± 0.02, 0.54 ± 0.01, respectively), the Flory chain stiffness ratio (C_∞ = 20 ± 1 (BSF analysis)), or the persistence length (L_p = 5.5 ± 0.2 nm) obtained from SEC fraction data. However, it was found that prefactors in the [η]–M and R_v–M relationships as well as the unperturbed parameter K_Θ decrease in proportion to DG and therefore chain density. Generalized relationships incorporating galactose-dependent prefactors were therefore developed to model SEC fraction data of native galactomannans ([η]_GM = (1800 ± 200) × M_o^−1.61 × M^0.61±0.02, R_v,GM = 0.63 ± 0.05 × M_o^−0.54 × M^0.54±0.01) as well as lower-M fractions obtained by ultrasonication ([η]_GM = (730 ± 100) × M_o^−1.71 × M_w^0.71±0.02, R_v,GM = 0.49 ± 0.05 × M_o^−0.57 × M_w^0.57±0.01, M ≈ 1 × 10⁵-native). As a consequence of this dependence and the observed patterns in molar mass variation, [η] varies within a narrow range for galactomannans as a whole despite substantial M_w differences.     

Glucose biosensor based on immobilization of glucose oxidase in poly(o-aminophenol) film on polypyrrole-Pt nanocomposite modified glassy carbon electrode

Novel Pt nanoclusters embedded polypyrrole nanowires (PPy-Pt) composite was electrosynthesized on a glassy carbon electrode, denoted as PPy-Pt/GCE. A glucose biosensor was further fabricated based on immobilization of glucose oxidase (GOD) in an electropolymerized non-conducting poly(o-aminophenol) (POAP) film that was deposited on the PPy-Pt/GCE. The morphologies of the PPy nanowires and PPy-Pt nanocomposite were characterized by field emission scanning electron microscope (FE-SEM). Effect of experimental conditions involving the cycle numbers for POAP deposition and Pt nanoclusters deposition, applied potential used in glucose determination, temperature and pH value of the detection solution were investigated for optimization. The biosensor exhibited an excellent current response to glucose over a wide linear range from 1.5 × 10⁻⁶ to 1.3 × 10⁻² M (r = 0.9982) with a detection limit of 4.5 × 10⁻⁷ M (s/n = 3). Based on the combination of permselectivity of the POAP and the PPy films, the sensor had good anti-interference ability to ascorbic acid (AA), uric acid (UA) and acetaminophen. The apparent Michaelis–Menten constant (K_m) and the maximum current density (I_m) were estimated to be 23.9 mM and 378 μA/cm², respectively. In addition, the biosensor had also good sensitivity, stability and reproducibility.     

Glycan-binding profile of a D-galactose binding lectin purified from the annelid, Perinereis nuntia ver. vallata

A lectin recognizing D-galactose was purified from the pacific annelid Perinereis nuntia ver. vallata (Polychaeta) by affinity chromatography. Hemagglutinating activity, with a very low titer suggesting the presence of lectin appeared in the supernatant from the homogenization of body with Tris-buffered saline. However, dialyzed supernatant from the precipitate homogenized by galactose in the buffer revealed strong hemagglutinating activity against human erythrocytes. The crude supernatant was applied onto lactosyl–agarose column, and only the supernatant eluted from precipitate with galactose was obtained a galactose-binding lectin with 32 kDa polypeptide was obtained from the supernatant of the precipitate, extracted in presence of galactose. It suggests that the lectin tightly binds with glycoconjugate as endogenous ligand(s) in the tissue. Hemagglutinating activity against trypsinized and glutaraldehyde-fixed human erythrocytes was specifically inhibited by D-galactose, N-acetyl-D-galactosamine, lactose, melibiose, and asialofetuin. Glycan-binding profile of the lectin analyzed by frontal affinity chromatography shows that the lectin recognizes branched complex type N-linked oligosaccharides and both type 1 (Galβ1-3GlcNAc) and type 2 (Galβ1-4GlcNAc) lactosamine. The surface plasmon resonance study of the lectin against asialofetuin showed the k_ass and k_diss values are 5.14 × 10⁴ M^− 1 s^− 1 and 2.9 × 10⁻³ s^− 1, respectively. The partial primary structure of the lectin reveals 182 amino acids with novel sequence.