A facile enzymatic process for the preparation of ibuprofen ester prodrug in organic media

A novel glucopyranoside derivative of ibuprofen, ibuprofen methyl -d-glucopyranoside ester was synthesized via immobilized lipase-catalyzed esterification between racemic ibuprofen and methyl -d-glucopyranoside in non-aqueous medium. An appropriate product concentration (4.6 mg ml⁻¹) was achieved by optimization of reaction conditions, such as solvent type, reaction temperature, enzyme concentration and initial concentration of substrates. Comparing with the parent drug ibuprofen in physicochemical properties, the glucopyranoside derivative of ibuprofen has better hydrophilicity. The chemical structure of the ibuprofen ester was confirmed to be methyl 6-O-(2′-(4′-isobutylphenyl) propionyl) -d-glucopyranoside.     

Microbial lipases: at the interface of aqueous and non-aqueous media. A review

In recent times, biotechnological applications of microbial lipases in synthesis of many organic molecules have rapidly increased in non-aqueous media. Microbial lipases are the 'working horses' in biocatalysis and have been extensively studied when their exceptionally high stability in non-aqueous media has been discovered. Stability of lipases in organic solvents makes them commercially feasibile in the enzymatic esterification reactions. Their stability is affected by temperature, reaction medium, water concentration and by the biocatalyst's preparation. An optimization process for ester synthesis from pilot scale to industrial scale in the reaction medium is discussed. The water released during the esterification process can be controlled over a wide range and has a profound effect on the activity of the lipases. Approaches to lipase catalysis like protein engineering, directed evolution and metagenome approach were studied. This review reports the recent development in the field ofnon-aqueous microbial lipase catalysis and factors controlling the esterification/transesterification processes in organic media.     

牛胰岛素的酰胺化反应及其六酰胺产物的分离及鉴定

牛胰岛素用1％三氟化硼甲醇溶液反应后所得六甲酯与饱和氨甲醇溶液反应,在室温下约经144小时可完全酰胺化。反应过程用红外光谱及酰胺含量分析测定。所得酰胺化粗产品经Sephadex G-75凝胶层析可以将胰岛素六酰胺化合物从其聚合物中分离提纯。由红外光谱、紫外光谱及圆二色散光谱测定表明:牛胰岛素的六酰胺化合物的构象与胰岛素有很大不同,其生物活性也丧失殆尽。     

Graft copolymerization of methyl methacrylate onto mercaptochitin and some properties of the resulting hybrid materials

The graft copolymerization of methyl methacrylate onto mercaptochitin and some properties of the resulting graft copolymers have been studied. Methyl methacrylate was efficiently graft copolymerized onto mercaptochitin in dimethyl sulfoxide, and the grafting percentage reached 1300% under appropriate conditions. Although the side-chain ester groups were resistant to aqueous alkali, hydrolysis could be achieved with a mixture of aqueous sodium hydroxide and dimethyl sulfoxide. Subsequent treatment with acetic anhydride in methanol transformed the sodium carboxylate groups into carboxyl groups. Although the graft copolymers exhibited an improved affinity for organic solvents, those having sodium carboxylate or carboxyl units were characterized by a much more enhanced solubility and were soluble in common solvents. The hygroscopic nature of chitin decreased with an increase in the grafting extent but increased significantly upon hydrolysis of the ester groups. The enzymatic degradability of the graft copolymers, as evaluated with lysozyme, was also dependent on the grafting extent and much higher than that of the original chitin. DSC measurements revealed the presence of a glass transition phenomenon, which could be ascribed to the poly(methyl methacrylate) side chain.     

Effects of non-aqueous solvents on CO2 absorption in monoethanolamine: Ab initio calculations

Monoethanolamine (MEA) is the most typical alkanolamine and its aqueous solutions are widely used for CO₂ absorption with mature technology, but the regeneration process is energy consuming. To reduce the energy demand, non-aqueous solvents, such as methanol and ethanol are proposed to substitute water in amine solutions. To understand the influence of the aqueous and non-aqueous solvents on CO₂ capture process, the chemical reactions of MEA absorbing CO₂ were conducted via ab initio calculations. The non-aqueous solvents discussed in this paper are methanol, ethanol, 1-propanol and 2-propanol. The reaction patterns were investigated and energy barriers were observed. The results show that zwitterion formation and the followed intermolecular hydrogen transfer are proven to be the most possible reaction pattern in both aqueous and non-aqueous solvents. The energy analysis shows that the forward reaction energy barriers increase while the backward barriers decrease as the solvent changes from water to methanol, ethanol, 1-propanol and 2-propanol in turn. The decreases of the energy barriers for backward processes are much higher than the corresponding increases for forward processes. These results indicate that lower energies are required in non-aqueous solvents than in water during the desorption reactions and the non-aqueous solvents are very promising to reduce the regeneration energy consumption in MEA capturing CO₂ process. Moreover, the reaction energy gaps between different solvation effects were found to have linear relationship with the logarithm of the dielectric constant difference, which could provide an easy way to theoretically predict the reaction energies of monoethanolamine absorbing CO₂ in other solvation effect and can be used to screen appropriate CO₂ capture solvent.     

Ester synthesis in aqueous media in the presence of various lipases

Summary The ability of seven lipase preparations to catalyse methyl ester synthesis in aqueous media was compared and the synthesis reaction (esterification or alcoholysis) determined. Three behaviours were observed: three enzymes catalysed ester synthesis by esterification of free fatty acids and one enzyme catalysed alcoholysis but the other three lipases did not catalyse a net ester synthesis under the conditions tested. The three groups also differed by the influence of methanol on the hydrolysis reaction. The first group was not significantly inhibited up to the highest methanol concentration tested (5 M). Hydrolysis in the presence of the enzyme of the second group was increasingly inhibited with increasing methanol concentrations. In the presence of the third group, hydrolysis was 40 to 50% inhibited for all the concentrations tested (0.2–5 M).     

Evaluation of a method for determining the free carboxyl group distribution in pectins

The distribution of free carboxyl groups in pectins has been investigated by a method that involves blocking the free carboxyl groups by glycolation, and hydrolysis of the methylesterified regions with a mixture of pectic enzymes. The hydrolysis products are separated from the glycolated regions on an ion exchange column and after deglycolation the oligomer size distribution is obtained by Sephacryl S-200 chromatography.The method was applied to five pectins with degrees of esterification in the range 5–70%. For two of the samples (an enzyme and an alkali de-esterified low methoxyl pectin) the degree of hydrolysis was significantly lower than would be predicted from the initial degree of esterification and thus for these materials the values obtained for the carboxyl group block sizes were considered to be a maximum rather than an accurate estimate.All the samples investigated had a significant proportion of free carboxyl regions with a degree of polymerisation greater than 10. With the possible exception of the pectate (degree of esterification 5%) none of the samples had a random distribution of carboxyl groups. This was considered to be a reflection of the distribution in the native pectin rather than indicating that chemical de-esterification was non-random. The large free carboxyl group block sizes was consistent with the egg-box model for low methoxyl pectin gelation. Larger blocks were found in the enzyme de-esterified pectin compared with the alkali and acid de-esterified material.     

Non-aqueous capillary electrophoresis of drugs: properties and application of selected solvents

The electrophoretic mobility of selected acidic and basic test solutes have been determined in non-aqueous media prepared by adding various combinations of ammonium acetate, sodium acetate, methane sulphonic acid and acetic acid to acetonitrile, propylene carbonate, methanol, formamide, N-methylformamide, N,N-dimethylformamide and dimethylsulphoxide, respectively. The apparent pH (pH*) of these non-aqueous media have been measured and it was found that pH* is an important factor for the separations in non-aqueous capillary electrophoresis. However, in some solvents the concentration of sodium acetate has a strong influence on the mobility despite very small changes in pH*. Due to the fact that a change in one parameter influences a number of other parameters it is very difficult to conduct systematic studies in non-aqueous media and to compare the migration of the species at fixed pH* values from one solvent to another. Thus pH* is only of value for comparison when used with a specific solvent or solvent mixture. The viscosity of the above-mentioned solvents were measured at various temperatures and means to adjust the viscosity of the non-aqueous media used for capillary electrophoresis are discussed and the separation of ibuprofen and its major metabolites in urine is used as an example.     

1H nuclear magnetic resonance studies of an integral membrane protein: subunit c of the F1F0 ATP synthase

The membrane-traversing subunit c parallel from the F0 part of the ATP synthase molecule has been studied in chloroform/methanol by high-resolution 1H n.m.r. Various one-dimensional and two-dimensional techniques have been used for assignment purposes, some NOE connectivities were established and some 3JHN alpha coupling constants were measured from spin--echo experiments. The effects of varying pH, solvent composition, lanthanide concentration and temperature have been investigated. Evidence is presented that the molecule has extensive alpha-helical segments, and the hairpin structure suggested by other groups is supported by our n.m.r. data. Only one ionizable group, assigned to the C-terminal carboxyl, is observed to titrate in the pH range 2 to 10; so the conserved residue, Asp61, which binds dicyclohexylcarbodiimide, presumably has (at least in this solvent system) an abnormally high pK value.     

In Vacuo Esterification of Carboxyl Groups in Lyophilized Proteins

A new method is described for the esterification of carboxyl groups in proteins by reaction of the lyophilized protein in vacuo with gaseous alcohol and HCI catalyst. Carboxyl groups are rapidly esterified with no protein degradation. 13C-Methyl or 13C-ethyl esters of the alpha-, gamma- and delta-carboxyl groups could be distinguished by the distinct chemical shifts of their resonances. Within the class of gamma- or delta-esters, the chemical shifts have little variation; however, the chemical shift of a C-terminal esterified alpha-carboxyl group shows a strong dependence on the nature of the C-terminal amino acid and sequence. Iodomethane reacts with deprotonated carboxyl groups in lyophilized proteins to form methyl esters, but unlike the reaction with gaseous methanol/HCI, it does not selectively methylate carboxyl groups. The procedure permits the cost-effective incorporation of isotopic labels and provides a new approach using 13C-NMR spectroscopy for determining the number of different C-termini present in a protein preparation.     

Reversible effects of medium dielectric constant on structural transformation of β-lactoglobulin and its retinol binding

The secondary structure transformation of β-lactoglobulin from a predominantly β-structure into a predominantly α-helical one, under the influence of solvent polarity changes is reversible. Independent of the alcohol used — methanol, ethanol, or 2-propanol — the midpoints of the observed structural transformation occur around dielectric constant ε ≈ 60. The structural change destroying the hydrophobic core formed by the β-barrel structure leads, at room temperature, to the dissociation of the retinol/β-lactoglobulin complex in the neighborhood of dielectric constant ε ≈ 50. However, when the dielectric constant of the medium is raised back to ε ≈ 70 by the decrease of the temperature, both the refolding of BLG into a β-structure and the reassociation of the retinol/β-lactoglobulin complex are observed. The esterification of β-lactoglobulin carboxyl groups has two effects: on the one hand it accelerates the β-strand → α-helix transition induced by alcohols. On the other hand, the esterification of β-lactoglobulin strengthens its interaction with retinol as it may be deduced from the smaller apparent dissociation constant of retinol/methylated β-lactoglobulin complex. The binding of retinol to modified or unmodified β-lactoglobulin has no influence (stabilizing or destabilizing) on the folding changes induced by alcohol. © 1993 John Wiley & Sons, Inc.     

Determination of copper binding in <Emphasis Type="Italic">Pseudomonas putida</Emphasis> CZ1 by chemical modifications and X-ray absorption spectroscopy

Previously performed studies have shown that Pseudomonas putida CZ1 biomass can bind an appreciable amount of Cu(II) and Zn(II) ions from aqueous solutions. The mechanisms of Cu- and Zn-binding by P. putida CZ1 were ascertained by chemical modifications of the biomass followed by Fourier transform infrared and X-ray absorption spectroscopic analyses of the living or nonliving cells. A dramatic decrease in Cu(II)- and Zn(II)-binding resulted after acidic methanol esterification of the nonliving cells, indicating that carboxyl functional groups play an important role in the binding of metal to the biomaterial. X-ray absorption spectroscopy was used to determine the speciation of Cu ions bound by living and nonliving cells, as well as to elucidate which functional groups were involved in binding of the Cu ions. The X-ray absorption near-edge structure spectra analysis showed that the majority of the Cu was bound in both samples as Cu(II). The fitting results of Cu K-edge extended X-ray absorption fine structure spectra showed that N/O ligands dominated in living and nonliving cells. Therefore, by combining different techniques, our results indicate that carboxyl functional groups are the major ligands responsible for the metal binding in P. putida CZ1.     

Solvent effects on the electrochemical properties of IrCl2(bpy)2+

To investigate the solvent dependence of the d-d contribution to the redox orbital of the cis-dichloro- bis-(s,2′-bipyridine) iridium(III) ion, the first reduction electron transfer has been studied in various non-aqueous and aqueous solvents by cyclic voltammetry and spectroelectrochemistry. Totally irreversible electrochemical processes and chloride release have been observed in water, methanol and formamide, which are consistent with the proposed pre-dominantly metallic nature of the redox orbital in these solvents. In other solvents the electron reduction sequence and the low chemical reaction rate of chloride release suggest a strong interaction between the ligand and metal-centered redox orbitals. Correlation of the reduction potential with the Gutmann's acceptor number and dielectric constant of the solvents indicates that chloride release depends strongly upon the dissociative properties of the solvent. The electrochemical behaviour and photochemical observations are compared.     

Phospholipid synthesis by extracellular phospholipase A2 in organic solvents

The catalytic activity of extracellular phospholipase A2 was studied in low polarity solvents where hydrolytic enzymes have been demonstrated to catalyze synthesis reactions. It was demonstrated that extracellular phospholipase A2 can catalyze the esterification of lysophosphatidylcholine with oleic acid. Up to 6.5% of lysophosphatidylcholine can be esterified into phosphatidylcholine. This activity requires a preincubation of the enzyme in a pH 9 aqueous solution containing calcium, before the incubation in the non-aqueous solvent. No transfer of fatty acid between a phospholipid and a lysophospholipid or between two phospholipids was observed. These results may be useful in understanding the function of the membrane phospholipase A2 which may catalyze acylation or deacylation depending on the local physico-chemical environment.     

Secondary solvent effects on the circular dichroism spectra of polypeptides in non-aqueous environments: influence of polarisation effects on the far ultraviolet spectra of alamethicin

Secondary solvent effects on the far ultraviolet circular dichroism spectra of the polypeptide alamethicin have been studied systematically in a series of alcohols. The magnitudes of the shifts have been correlated with the physical properties of the solvents in an attempt to discover the underlying physical principles responsible for these shifts. The solvent effect in non-aqueous solvents generally produces spectral transitions with peaks found at longer wavelengths than those in aqueous solution, and is correlated with increasing refractive indices and with decreasing dielectric constants of the solvents. It appears that polarisation effects are the major contributors to the interactions between the chromophore and solvent molecules, and hence give rise to the red shift. It is clear that this secondary solvent effect is an important factor which should be considered in the examination and estimation of polypeptide secondary structures in non-aqueous solvents and membranes.     

Peptide synthesis by proteases in organic solvents: medium effect on substrate specificity.

The substrate specificities of alpha-chymotrypsin and subtilisins for peptide synthesis in hydrophilic organic solvents were investigated. Chymotrypsin exhibited high specificity to aromatic amino acids as acyl donors, while subtilisin Carlsberg and subtilisin BPN' were specific to aromatic and neutral aliphatic amino acids, in accordance with the S1 specificities of the enzymes for peptide hydrolysis in aqueous solutions. On the contrary, chymotrypsin exhibited higher specificities to hydrophilic amino acid amides as acyl acceptors (nucleophiles) for peptide synthesis with N-acetyl-L-tyrosine ethyl ester, in contrast to the S1' specificity for peptide hydrolysis and peptide synthesis in aqueous solutions. Furthermore, nucleophile specificity changed with the change in water-organic solvent composition; the increase in water content led to increase in relative reactivity of leucinamide to that of alaninamide. It was also found that protection of the carboxyl group of alanine by amidation is much preferable to protection by esterification in terms of reactivity as nucleophiles.     

Separation of polyunsaturated fatty acids by selective inclusion in guanidinium-1,5-naphthalenedisulfonate-2-methoxyethanol host networks

Hydrogen-bonded networks composed of guanidinium (G) and 1,5-naphthalenedisulfonate (NDS) have been developed for the selective inclusion and separation of fatty acid esters based on their degree of unsaturation. Porous crystalline networks have been synthesized and include fatty acid esters during crystallization from both methanol and 2-methoxyethanol. Crystalline networks formed in methanol are selective for the inclusion of saturates in preference to polyunsaturated fatty acid methyl esters, but their applicability is limited by the competing inclusion of the solvent methanol. In 2-methoxyethanol, a three-component host structure is formed that provides 4.1 x 4.7 A2 pores which are also selective for saturated fatty acid ester inclusion. These networks do not suffer from the competing inclusion of the solvent 2-methoxyethanol as is the case with methanol, and thus complete removal of initial saturated fatty acid 2-methoxyethyl esters is possible. Binary selectivity experiments on mixtures of the 2-methoxyethyl esters of saturated stearic acid and the omega-3 fatty acid alpha-linolenic acid reveal that this three-component network structure provides nearly complete resolution of these two guests in the crystal and filtrate fractions. Separation of the 2-methoxyethyl esters of alpha-linolenic acid from the monounsaturated oleic acid is also possible, although with decreased efficiency in comparison to removal of the saturated fatty acid ester.     

Lipase catalysed synthesis of propanediol monoesters in biphasic aqueous medium

The 1,3-regiospecific lipase from Candida deformanscatalysed the esterification of oleic acid and propanediol in biphasic aqueous/lipid medium without organic solvent. The highest conversion of oleic acid into 1,2-propanediol ester was 74% in 24 h with 6.25 mol/l 1,2-propanediol and 0.08 mol/l oleic acid, and produced 100% monoester. The esterification of 1,3-propanediol converted up to 98% of oleic acid into esters in 24 h (with 7.5 mol/l 1,3-propanediol and 0.08 mol/l oleic acid) and formed 35-90% monoester depending on 1,3-propanediol initial concentration (2.5-10 mol/l).     

Synthesis of beta- and gamma-fluorenylmethyl esters of respectively N alpha-Boc-L-aspartic acid and N alpha-Boc-L-glutamic acid

The orthogonal synthesis of N alpha-Boc-L-aspartic acid-gamma-fluorenylmethyl ester and N alpha-Boc-L-glutamic acid-delta-fluorenylmethyl ester is reported. This is a four-step synthesis that relies on the selective esterification of the side-chain carboxyl groups on N alpha-CBZ-L-aspartic acid and N alpha-CBZ-L-glutamic acid. Such selectivity is accomplished by initially protecting the alpha-carboxyl group through the formation of the corresponding 5-oxo-4-oxazolidinone ring. Following side-chain esterification, the alpha-carboxyl and alpha-amino groups are deprotected with acidolysis. Finally, the alpha-amino group is reprotected with the t-butyl-oxycarbonyl (Boc) group. Thus aspartic acid and glutamic acid have their side-chain carboxyl groups protected with the base-labile fluorenylmethyl ester (OFm) and their alpha-amino groups protected with the acid-labile Boc group. These residues, when used in conjunction with N alpha-Boc-N epsilon-Fmoc-L-lysine, are important in the formation of side-chain to side-chain cyclizations, via an amide bridge, during solid-phase peptide synthesis.     

Amplification and detection of substrates for protein carboxyl methyltransferases in PC12 cells.

A strategy that facilitates the identification of substrates for protein carboxyl methyltransferases that form "stable" methyl esters, i.e., those that remain largely intact during conventional polyacrylamide gel electrophoresis is described. Rat PC12 cells were cultured in the presence of adenosine dialdehyde (a methylation inhibitor) to promote the accumulation of hypomethylated proteins. Nonidet P-40 cell extracts were then incubated in the presence of S-[methyl-3H]adenosyl-L-methionine to label methyl-accepting sites via endogenous methyltransferases. After labeled proteins were separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, gel slices were incubated in 4 N methanesulfonic acid or 6 N HCl to hydrolyze methyl esters. The resulting [3H]methanol was detected by trapping in liquid scintillation fluid. Seven carboxyl methylated proteins were observed with masses ranging from 18 to 96 kDa. Detection of five of these proteins required prior treatment of cells with adenosine dialdehyde, while methyl incorporation into one protein at 18 kDa was substantially enhanced by the treatment. The use of acidic conditions for methyl ester hydrolysis has an important advantage over assays that utilize alkaline hydrolysis conditions. In PC12 cells, and possibly other cell types where there are significant levels of arginine methylation, the methanol signal becomes obscured by high levels of volatile methylamines generated under the alkaline conditions. Carrying out diffusion assays under acidic conditions eliminates this interference. Adenosine dialdehyde, by virtue of increasing the methyl-accepting capacity of substrates for protein carboxyl methyltransferases, in combination with a more selective assay for carboxyl methylation, should prove useful in the isolation and characterization of new protein carboxyl methyltransferases and their substrates.