Thermostable alkaline protease from newly isolated <Emphasis Type="Italic">Vibrio</Emphasis> sp.: extraction,purification and characterisation

An extracellular alkaline protease-producing Vibrio sp. was isolated from mangrove sediments of Vellar estuary. A 9.36-fold purification was achieved by a three-step purification procedure and the molecular weight of the enzyme was determined as 33 kDa by SDS-PAGE. The enzyme was active in a broad range of pH (6.0–11.0) and temperature (30–70°C), the optimum being at pH 9.0 and temperature 55°C. The enzyme was stable at alkaline pH range of 9–11 and up to a temperature of 60°C, after incubation for 1 h. Metals like Co²⁺, Hg²⁺, Ni²⁺ and Cu²⁺ inhibited the enzyme activity, whereas Fe²⁺, Ca²⁺ and Mn²⁺ were found to enhance the activity. The protease was found to be highly stable in the presence of oxidizing agents like H₂O₂, detergents such as SDS and Triton-X-100 and also some of the commonly used commercial detergents. The organic solvents like xylene, isopropanol, hexane and benzene were found to enhance as well as stabilize the enzyme activity. The extracellular production of the enzyme, the pH and thermal stability, and the stability in presence of oxidants, surfactants, commercial detergents and organic solvents, altogether suggest that it can be used as a laundry additive.     

Purification and characterization of a halophilic α-amylase with increased activity in the presence of organic solvents from the moderately halophilic Nesterenkonia sp. strain F

An extracellular halophilic α-amylase was purified from Nesterenkonia sp. strain F using 80 % ethanol precipitation and Q-Sepharose anion exchange chromatography. The enzyme showed a single band with an apparent molecular weight of 110 kDa by SDS-PAGE. The amylase exhibited maximal activity at pH 7-7.5, being relatively stable at pH 6.5-7.5. Optimal temperature for the amylase activity and stability was 45 °C. The purified enzyme was highly active in the broad range of NaCl concentrations (0-4 M) with optimal activity at 0.25 M NaCl. The amylase was highly stable in the presence of 3-4 M NaCl. Amylase activity was not influenced by Ca2?, Rb?, Li?, Cs?, Mg2? and Hg2?, whereas Fe3?, Cu2?, Zn2? and Al3?) strongly inhibited the enzyme activity. The α-amylase was inhibited by EDTA, but was not inhibited by PMSF and β-mercaptoethanol. K(m) value of the amylase for soluble starch was 6.6 mg/ml. Amylolytic activity of the enzyme was enhanced not only by 20 % of water-immiscible organic solvents but also by acetone, ethanol and chloroform. Higher concentration (50 %) of the water-miscible organic solvents had no significant effect on the amylase activity. To the best of our knowledge, this is the first report on increased activity of a microbial α-amylase in the presence of organic solvents.     

Laundry detergent compatibility of the alkaline protease from Bacillus cereus

The endogenous protease activity in various commercially available laundry detergents of international companies was studied. The maximum protease activity was found at 50 degrees C in pH range 10.5-11.0 in all the tested laundry detergents. The endogenous protease activity in the tested detergents retained up to 70% on incubation at 40 degrees C for 1 h, whereas less than 30% activity was only found on incubation at 50 degrees C for 1 h. The alkaline protease from an alkalophilic strain of Bacillus cereus was studied for its compatibility in commercial detergents. The cell free fermented broth from shake flask culture of the organism showed maximum activity at pH 10.5 and 50 degrees C. The protease from B. cereus showed much higher residual activity (more than 80%) on incubation with laundry detergents at 50 degrees C for 1 h or longer. The protease enzyme from B. cereus was found to be superior over the endogenous proteases present in the tested commercial laundry detergents in comparison to the enzyme stability during the washing at higher temperature, e.g., 40-50 degrees C.     

An organic solvent-, detergent-, and thermo-stable alkaline protease from the mesophilic, organic solvent-tolerant Bacillus licheniformis 3C5

Bacillus licheniformis 3C5, isolated as mesophilic bacterium, exhibited tolerance towards a wide range of non-polar and polar organic solvents at 45 degrees C. It produced an extracellular organic solvent-stable protease with an apparent molecular mass of approximately 32 kDa. The inhibitory effect of PMSF and EDTA suggested it is likely to be an alkaline serine protease. The protease was active over abroad range of temperatures (45-70 degrees C) and pH (8-10) range with an optimum activity at pH 10 and 65 degrees C. It was comparatively stable in the presence ofa relatively high concentration (35% (v/v)) of organic solvents and various types of detergents even at a relatively high temperature (45 degrees C). The protease production by B. licheniformis 3C5 was growth-dependent. The optimization of carbon and nitrogen sources for cell growth and protease production revealed that yeast extract was an important medium component to support both cell growth and the protease production. The overall properties of the protease produced by B. licheniformis 3C5 suggested that this thermo-stable, solvent-stable, detergent-stable alkaline protease is a promising potential biocatalyst for industrial and environmental applications.     

Purification and characterization of a maltooligosaccharide-forming amylase that improves product selectivity in water-miscible organic solvents, from dimethylsulfoxide-tolerant Brachybacterium sp. strain LB25

A bacterium that secretes maltooligosaccharide-forming amylase in a medium containing 12.5% (vol/vol) dimethylsulfoxide (DMSO) was isolated and identified as Brachybacterium sp. strain LB25. The amylase of the strain was purified from the culture supernatant, and its molecular mass was 60 kDa. The enzyme was stable at pH 7.0–8.5 and active at pH 6.0–7.5. The optimum temperature at pH 7.0 was 35°C in the presence of 5 mM CaCl₂. The enzyme hydrolyzed starch to produce maltotriose primarily. The enzyme was active in the presence of various organic solvents. Its yield and product selectivity of maltooligosaccharides in the presence of DMSO or ethanol were compared with those of the industrial maltotriose-forming amylase from Microbacterium imperiale. Both enzymes improved the production selectivity of maltotriose by the addition of DMSO or ethanol. However, the total maltooligosaccharide yield in the presence of the solvents was higher for LB25 amylase than for M. imperiale amylase.     

Highly thermostable, thermophilic, alkaline, SDS and chelator resistant amylase from a thermophilic Bacillus sp. isolate A3-15

A thermostable alkaline alpha-amylase producing Bacillus sp. A3-15 was isolated from compost samples. There was a slight variation in amylase synthesis within the pH range 6.0 and 12.0 with an optimum pH of 8.5 (8mm zone diameter in agar medium) on starch agar medium. Analyses of the enzyme for molecular mass and amylolytic activity were carried out by starch SDS-PAGE electrophoresis, which revealed two independent bands (86,000 and 60,500 Da). Enzyme synthesis occurred at temperatures between 25 and 65 degrees C with an optimum of 60 degrees C on petri dishes. The partial purification enzyme showed optimum activity at pH 11.0 and 70 degrees C. The enzyme was highly active (95%) in alkaline range of pH (10.0-11.5), and it was almost completely active up to 100 degrees C with 96% of the original activity remaining after heat treatment at 100 degrees C for 30 min. Enzyme activity was enhanced in the presence of 5mM CaCl2 (130%) and inhibition with 5mM by ZnCl2, NaCl, Na-sulphide, EDTA, PMSF (3mM), Urea (8M) and SDS (1%) was obtained 18%, 20%, 36%, 5%, 10%, 80% and 18%, respectively. The enzyme was stable approximately 70% at pH 10.0-11.0 and 60 degrees C for 24h. So our result showed that the enzyme was both, highly thermostable-alkaline, thermophile and chelator resistant. The A3-15 amylase enzyme may be suitable in liquefaction of starch in high temperature, in detergent and textile industries and in other industrial applications.     

Cloning, high-level expression, purification, and properties of a novel endo-beta-1,4-mannanase from Bacillus subtilis G1 in Pichia pastoris

A novel gene coding for an endo-beta-1,4-mannanase (manA) from Bacillus subtilis strain G1 was cloned and overexpressed in P. pastoris GS115, and the enzyme was purified and characterized. The manA gene consisted of an open reading frame of 1,092 nucleotides, encoding a 364-aa protein, with a predicted molecular mass of 41 kDa. The beta-mannanase showed an identity of 90.2-92.9% (< or =95%) with the corresponding amino acid sequences from B. subtilis strains deposited in GenBank. The purified beta- mannanase was a monomeric protein on SDS-PAGE with a specific activity of 2,718 U/mg and identified by MALDITOF mass spectrometry. The recombinant beta-mannanase had an optimum temperature of 45 degrees C and optimum pH of 6.5. The enzyme was stable at temperatures up to 50 degrees C (for 8 h) and in the pH range of 5-9. EDTA and most tested metal ions showed a slightly to an obviously inhibitory effect on enzyme activity, whereas metal ions (Hg2+, Pb2+, and Co2+) substantially inhibited the recombinant beta-mannanase. The chemical additives including detergents (Triton X- 100, Tween 20, and SDS) and organic solvents (methanol, ethanol, n-butanol, and acetone) decreased the enzyme activity, and especially no enzyme activity was observed by addition of SDS at the concentrations of 0.25-1.0% (w/v) or n-butanol at the concentrations of 20-30% (v/v). These results suggested that the beta-mannanase expressed in P. pastoris could potentially be used as an additive in the feed for monogastric animals.     

Single step purification and characterization of a thermostable and calcium independent α-amylase from Bacillus amyloliquifaciens TSWK1-1 isolated from Tulsi Shyam hot spring reservoir, Gujarat (India)

A thermophilic bacteria, identified and designated as Bacillus amyloliquifaciens TSWK1-1 (16S rRNA gene sequence, GenBank: GQ121033), was isolated from a hot water reservoir located at Tulsi Shyam, Gujarat, India. The optimum temperature and pH for amylase production were 50 °C and 7.0, respectively. The crude enzyme was partially purified by ammonium sulphate fractionation followed by dialysis. However, single step purification was achieved on Phenyl Sepharose 6FF affinity column with 45.71% yield, 8000 U/mg specific activity and 13.33 fold purification. The molecular weight of the purified α-amylase was 43 kD. The optimal temperature and pH for amylase activity were 70 °C and 7.0, respectively; however, the purified amylase was stable at broad temperature and pH range. The purified amylase did not require Ca(++) and K(+); however, it was moderately affected by Mg(++) and Cu(++) and significantly inhibited by Na(+) and Fe(++). The amylase was highly thermostable and remained active for 24h at 60 °C, for 12h at 70 °C and up to 3h even at 90 °C. Other unique features of the enzyme were calcium independent nature and resistance against chemical denaturation by Urea and Guanidine-HCl. The data on the enzymatic stability at different levels of purity would add significantly to the knowledge of amylases.     

Activity and stability of cross-linked tyrosinase aggregates in aqueous and nonaqueous media

Cross-linked tyrosinase aggregates were prepared by precipitating the enzyme with ammonium sulfate and subsequent cross-linking with glutaraldehyde. Both activity and stability of these cross-linked enzyme aggregates (CLEAs) in aqueous solution, organic solvents, and ionic liquids have been investigated. Immobilization effectively improved the stability of the enzyme in aqueous solution against various deactivating conditions such as pH, temperature, denaturants, inhibitors, and organic solvents. The stability of the CLEAs in various organic solvents such as tert-butanol (t(1/2)=326.7h at 40°C) was significantly enhanced relative to that in aqueous solution (t(1/2)=5.5h). The effect of thermodynamic water activity (a(w)) on the CLEA activity in organic media was examined, demonstrating that the enzyme incorporated into CLEAs required an extensive hydration (with an a(w) approaching 1.0) for optimizing its activity. The impact of ionic liquids on the CLEA activity in aqueous solution was also assessed.     

An organic solvent-, detergent-, and thermostable alkaline protease from the mesophilic, organic solvent-tolerant Bacillus licheniformis 3C5

Bacillus licheniformis 3C5, isolated as mesophilic bacterium, exhibited tolerance towards a wide range of non-polar and polar organic solvents at 45°C. It produced an extracellular organic solvent-stable protease with an apparent molecular mass of approximately 32 kDa. The inhibitory effect of PMSF and EDTA suggested it is likely to be an alkaline serine protease. The protease was active over a broad range of temperatures (45–70°C) and pH (8–10) range with an optimum activity at pH 10 and 65°C. It was comparatively stable in the presence of a relatively high concentration (35% (v/v)) of organic solvents and various types of detergents even at a relatively high temperature (45°C). The protease production by B. licheniformis 3C5 was growth-dependent. The optimization of carbon and nitrogen sources for cell growth and protease production revealed that yeast extract was an important medium component to support both cell growth and the protease production. The overall properties of the protease produced by B. licheniformis 3C5 suggested that this thermo-stable, solvent-stable, detergent-stable alkaline protease is a promising potential biocatalyst for industrial and environmental applications.     

Applications of a high maltose forming,thermo-stable α-amylase from an extremely alkalophilic Bacillus licheniformis strain AS08E in food and laundry detergent industries

An alkalophilic bacterial strain was isolated from the soil sample of Assam, North-East India. This strain was found capable of growing and producing α-amylase at extremely alkaline pH (12.5). By molecular characterization, this bacterium was identified as Bacillus licheniformis strain AS08E. Statistical optimization of media components resulted in 3-fold increase in the production of α-amylase from this bacterium. From this strain, a major extracellular α-amylase of ∼55 kDa was purified to homogeneity with a 14.5-fold increase in its specific activity. The N-terminal sequence of this enzyme showed extensive identity with α-amylases purified from thermostable bacteria. The purified enzyme showed optimum activity at pH 10.0 and 80 °C, and demonstrated stability toward various surfactants, organic solvents, and commercial laundry detergents. The spectroflurometric analysis suggests that the enzyme has a strong binding affinity toward soluble starch. TLC analysis of starch degradation product displays this α-amylase as a high maltose-forming enzyme. The future application of this enzyme in food and detergent industries is highly promising.     

Purification and characterization of a liquefying α-amylase from alkalophilic thermophilic Bacillus sp. AAH-31

α-Amylase (EC 3.2.1.1) hydrolyzes an internal α-1,4-glucosidic linkage of starch and related glucans. Alkalophilic liquefying enzymes from Bacillus species are utilized as additives in dishwashing and laundry detergents. In this study, we found that Bacillus sp. AAH-31, isolated from soil, produced an alkalophilic liquefying α-amylase with high thermostability. Extracellular α-amylase from Bacillus sp. AAH-31 (AmyL) was purified in seven steps. The purified enzyme showed a single band of 91 kDa on SDS-PAGE. Its specific activity of hydrolysis of 0.5% soluble starch was 16.7 U/mg. Its optimum pH and temperature were 8.5 and 70 °C respectively. It was stable in a pH range of 6.4-10.3 and below 60 °C. The calcium ion did not affect its thermostability, unlike typical α-amylases. It showed 84.9% of residual activity after incubation in the presence of 0.1% w/v of EDTA at 60 °C for 1 h. Other chelating reagents (nitrilotriacetic acid and tripolyphosphate) did not affect the activity at all. AmyL was fully stable in 1% w/v of Tween 20, Tween 80, and Triton X-100, and 0.1% w/v of SDS and commercial detergents. It showed higher activity towards amylose than towards amylopectin or glycogen. Its hydrolytic activity towards γ-cyclodextin was as high as towards short-chain amylose. Maltotriose was its minimum substrate, and maltose and maltotriose accumulated in the hydrolysis of maltooligosaccharides longer than maltotriose and soluble starch.     

Production, purification, and characterization of a novel thermostable serine protease from soil isolate, Streptomyces tendae

An isolate of Streptomyces tendae produced a extracellular protease which was purified to apparent homogeneity giving a single band on SDS-PAGE with a molecular mass of 21 kDa. Optimum activity was at 70 degrees C and pH 6. It was stable at 55 degrees C for 30 min and between pH 4 and 9. It was resistant to neutral detergents and organic solvents such as Triton X-100, Tween 80, methanol, ethanol, acetone, and 2-propanol at 5% (v/v). The enzyme was completely inhibited by 5 mM PMSF, indicating it to be a serine protease. N-terminal amino acid sequence did not show any homology with other known proteolytic enzymes. The protease may therefore be a novel neutral serine protease, which is stable at high temperature and over a broad range of pH.     

Characterization of a solvent resistant and thermostable aminopeptidase from the hyperthermophillic bacterium, Aquifex aeolicus

A leucine aminopeptidase gene of Aquifex aeolicus, a hyperthermophilic bacterium, was cloned and expressed in Escherichia coli, and its expression product was purified and characterized. The expressed protein was purified to homogeneity by using heat to denature contaminating proteins followed by ion-exchange chromatography to purify the heat-stable product. The purified enzyme gave a single band on SDS-PAGE with a molecular weight of 54 kDa. Kinetic studies on the purified enzyme confirmed that it was a leucine aminopeptidase. The optimum temperature for its activity was around 80 degrees C and the optimum pH was in the range from 8.0 to 8.5. It was stable at high temperatures and 27% of its activity was retained after heating at 115 degrees C for 30 min. The purified enzyme had a pH stability range between 4.0 and 11.0. This aminopeptidase was highly resistant to organic solvents such as methanol, ethanol, tetrahydrofuran, dimethyl sulfoxide, acetone, acetonitrile, dimethyl formamide, 1-propanol, 2-propanol, and dioxane.     

Stability of thermostable alkaline protease from Bacillus licheniformis RP1 in commercial solid laundry detergent formulations

The stability of crude extracellular protease produced by Bacillus licheniformis RP1, isolated from polluted water, in various solid laundry detergents was investigated. The enzyme had an optimum pH and temperature at pH 10.0–11.0 and 65–70 °C. Enzyme activity was inhibited by PMSF, suggesting that the preparation contains a serine-protease. The alkaline protease showed extreme stability towards non-ionic (5% Tween 20% and 5% Triton X-100) and anionic (0.5% SDS) surfactants, which retained 100% and above 73%, respectively, of its initial activity after preincubation 60 min at 40 °C.

The RP1 protease showed excellent stability and compatibility with a wide range of commercial solid detergents at temperatures from 40 to 50 °C, suggesting its further application in detergent industry. The enzyme retained 95% of its initial activity with Ariel followed by Axion (94%) then Dixan (93.5%) after preincubation 60 min at 40 °C in the presence of 7 mg/ml of detergents. In the presence of Nadhif and New Det, the enzyme retained about 83.5% of the original activity. The effects of additives such as maltodextrin, sucrose and PEG 4000 on the stability of the enzyme during spray-drying and during subsequent storage in New Det detergent were also examined. All additives tested enhanced stability of the enzyme.     

Purification and characterization of a chemotolerant alcohol dehydrogenase applicable to coupled redox reactions

The purification and characterization of an organic solvent tolerant, NADH-dependent medium-chain secondary alcohol dehydrogenase (denoted sec-ADH "A") from Rhodococcus ruber DSM 44541 is reported. The enzyme can withstand elevated concentrations of organic solvents, such as acetone (up to 50% v/v) and 2-propanol (up to 80% v/v). Thus, it is ideally suited for the preparative-scale enantioselective oxidation of sec-alcohol and the asymmetric reduction of ketones, using acetone and 2-propanol, respectively, as cosubstrates for cofactor-regeneration via a coupled-substrate approach. The homodimeric protein was found to bear tightly bound zinc and displayed a molecular mass of 38 kDa per subunit as determined by SDS gel electrophoresis. The optimal temperature ranged from 30-50 degrees C and the half-life at 50 degrees C was 35 h. In addition, excellent storage stability was found. The pH optimum for reduction is pH 6.5; pH 9.0 is preferred for oxidation. The enzyme followed a sequential reaction mechanism. The substrates are medium chain sec-alcohols or (omega-1)-ketones; primary alcohols or aldehydes are not accepted.     

A novel organic solvent-stable alkaline protease from organic solvent–tolerant Bacillus licheniformis YP1A

An organic solvent-stable alkaline protease producing bacterium was isolated from the crude oil contaminant soil and identified as Bacillus licheniformis. The enzyme retained more than 95% of its initial activity after pre-incubation at 40 °C for 1 h in the presence of 50% (v/v) organic solvents such as DMSO, DMF, and cyclohexane. The protease was active in a broad range of pH from 8.0 to 12.0 with the optimum pH 9.5. The optimum temperature for this protease activity was 60 °C, and the enzyme remained active after incubation at 50–60 °C for 1 h. This organic solvent-stable protease could be used as a biocatalyst for organic solvent-based enzymatic synthesis.     

Characterization of laccase activity produced by Cryptococcus albidus

This study deals with the characterization of laccase enzyme activity produced by Cryptococcus albidus. Industrial wastes like effluent and sludge are complex mixtures of a number of chemicals. These chemicals can interfere with the proper functioning of the enzymes used for bioremediation. Thus, it is important to study the effect of such interfering solvents, detergents, metal chelators, and other chemicals on enzyme activity before industrial applications. Laccase showed maximum activity at pH 2.5 and temperature 20-30°C when ABTS was used as a substrate. The enzyme followed Michaelis-Menten kinetics: K(m) was 0.8158 mM and V(max) was 1527.74 U/mg. Laccase showed good thermostability with a half-life of 81 min at 25°C, 77 min at 35°C, 64 min at 45°C, 36 min at 55°C, and 21 min at 65°C. There was no effect of sodium dodceyl sulfate (SDS) (0.1-1.0%) and EDTA (0.1-0.5%) on laccase activity. Sodium azide and 2-mercaptoethanol showed complete inhibition of laccase activity at 0.1% concentration. At lower concentrations of acetone and acetonitrile, laccase was able to maintain its activity. However, the activity was completely inhibited at a concentration of 50% or above of acetone, methanol, 1,4-dioxan, and acetonitrile.     

Purification and Characterization of a Thermo- and Organic Solvent-Tolerant Alkaline Protease from Bacillus sp. JER02

Bacillus sp. JER02 is a bacterial strain that can be grown in a medium containing organic solvents and produce a protease enzyme. JER02 protease was purified with a yield of 31.9% of total protein and 328.83-fold purification. K _m and V_max of this protease were established as 0.826 µM and 7.18 µmol/min, respectively. JER02 protease stability was stimulated about 80% by cyclohexane. It exhibited optimum temperature activity at 70°C. Furthermore, this enzyme was active in a wide range of pH (4-12) and showed maximum activity at pH 9.0. The nonionic detergents Tween-20 and Triton X-100 improved the protease activity by 30 and 20%, respectively. In addition, this enzyme was shown to be very stable in the presence of strong anionic surfactants and oxidizing agents, since it retained 77%, 93%, and 98% of its initial activity, after 1 hr of incubation at room temperature with sodium dodecyl sulfate (SDS), sodium perborate (1%, v/v) and H₂O₂ (1%, v/v), respectively. Overall, the unique properties of the Bacillus sp. JER02 protease suggested that this thermo- and detergent-stable, solvent-tolerant protease has great potential for industrial applications.     

Culture Conditions for Production of Thermostable Amylase by Bacillus stearothermophilus

Bacillus stearothermophilus grew better on complex and semisynthetic medium than on synthetic medium supplemented with amino acids. Amylase production on the complex medium containing beef extract or corn steep liquor was higher than on semisynthetic medium containing peptone (0.4%). The synthetic medium, however, did not provide a good yield of extracellular amylase. Among the carbohydrates which favored the production of amylase are, in order starch > dextrin > glycogen > cellobiose > maltohexaose-maltopeptaose > maltotetraose and maltotriose. The monosaccharides repressed the enzyme production, whereas inositol and d-sorbitol favored amylase production. Organic and inorganic salts increased amylase production in the order of KCI > sodium malate > potassium succinate, while the yield was comparatively lower with other organic salts of Na and K. Amino acids, in particular isoleucine, cysteine, phenylalanine, and aspartic acids, were found to be vital for amylase synthesis. Medium containing CaCl(2) 2H(2)O enhanced amylase production over that on Ca -deficient medium. The detergents Tween-80 and Triton X-100 increased biomass but significantly suppressed amylase synthesis. The amylase powder obtained from the culture filtrate by prechilled acetone treatment was stable over a wide pH range and liquefied thick starch slurries at 80 degrees C. The crude amylase, after (NH(4))(2)SO(4) fractionation, had an activity of 210.6 U mg. The optimum temperature and pH of the enzyme were found to be 82 degrees C and 6.9, respectively. Ca was required for the thermostability of the enzyme preparation.