Hydrolysis of triple-helical collagen peptide models by matrix metalloproteinases

The matrix metalloproteinase (MMP) family has been implicated in the process of a variety of diseases such as arthritis, atherosclerosis, and tumor cell metastasis. To study the mechanisms of MMP action on collagenous substrates, we have constructed homotrimeric triple-helical peptide (THP) models of the collagenase cleavage sites in types I and II collagen. The THPs incorporate either the alpha1(I)772-786 or the alpha1(II)772-783 sequence. The alpha1(I)772-786 and alpha1(II)772-783 THPs were hydrolyzed by MMP-1 at the Gly-Ile and Gly-Leu bonds, respectively, analogous to the bonds cleaved in corresponding native collagens. Thus, the THPs contained all necessary information to direct MMP-1 binding and proteolysis. Subsequent investigations using the alpha1(I)772-786 THP showed hydrolysis by MMP-2, MMP-13, and a COOH-terminal domain-deleted MMP-1 (MMP-1(Delta(243-450))) but not by MMP-3 or a COOH-terminal domain-deleted MMP-3 (MMP-3(Delta(248-460))). Kinetic analyses showed a k(cat)/K(m) value of 1,808 s(-1) m(-1) for MMP-1 hydrolysis of alpha1(I)772-786 THP, approximately 10-fold lower than for type I collagen. The effect is caused primarily by relative K(m) values. MMP-2 and MMP-13 cleaved the THP more rapidly than MMP-1, but MMP-2 cleavage occurred at distinct multiple sites. Comparison of MMP-1 and MMP-1(Delta(243-450)) hydrolysis of alpha1(I)772-786 THP showed that both can cleave a triple-helical substrate with a slightly higher K(m) value for MMP-1(Delta(243-450)). We propose that the COOH-terminal domain of MMPs is necessary for orienting whole, native collagen molecules but may not be necessary for binding to and cleaving a THP. This proposal is consistent with the large distance between the MMP-1 catalytic and COOH-terminal domains observed by three-dimensional structural analysis and supports previous suggestions that the features of the catalytic domain contribute significantly toward enzyme specificity.     

Kinetic analysis of matrix metalloproteinase activity using fluorogenic triple-helical substrates

Matrix metalloproteinase (MMP) family members are involved in the physiological remodeling of tissues and embryonic development as well as pathological destruction of extracellular matrix components. To study the mechanisms of MMP action on collagenous substrates, we have constructed homotrimeric, fluorogenic triple-helical peptide (THP) models of the MMP-1 cleavage site in type II collagen. The substrates were designed to incorporate the fluorophore/quencher pair of (7-methoxycoumarin-4-yl)acetyl (Mca) and N-2,4-dinitrophenyl (Dnp) in the P(5) and P(5)' positions, respectively. In addition, Arg was incorporated in the P(2)' and P(8)' positions to enhance enzyme activity and improve substrate solubility. The desired sequences were Gly-Pro-Lys(Mca)-Gly-Pro-Gln-Gly approximately Leu-Arg-Gly-Gln-Lys(Dnp)-Gly-Ile/Val-Arg. Two fluorogenic substrates were prepared, one using a covalent branching protocol (fTHP-1) and one using a peptide self-assembly approach (fTHP-3). An analogous single-stranded substrate (fSSP-3) was also synthesized. Both THPs were hydrolyzed by MMP-1 at the Gly approximately Leu bond, analogous to the bond cleaved in the native collagen. The individual kinetic parameters for MMP-1 hydrolysis of fTHP-3 were k(cat) = 0.080 s(-1) and K(M) = 61.2 microM. Subsequent investigations showed fTHP-3 hydrolysis by MMP-2, MMP-3, MMP-13, a C-terminal domain-deleted MMP-1 [MMP-1(Delta(243-450))], and a C-terminal domain-deleted MMP-3 [MMP-3(Delta(248-460))]. The order of k(cat)/K(M) values was MMP-13 > MMP-1 approximately MMP-1(Delta(243-450)) approximately MMP-2 > MMP-3 approximately MMP-3(Delta(248-460)). Studies on the effect of temperature on fTHP-3 and fSSP-3 hydrolysis by MMP-1 showed that the activation energies between these two substrates differed by 3.4-fold, similar to the difference in activation energies for MMP-1 hydrolysis of type I collagen and gelatin. This indicates that fluorogenic triple-helical substrates mimic the behavior of the native collagen substrate and may be useful for the investigation of collagenase triple-helical activity.     

Heterotrimeric collagen peptides containing functional epitopes. Synthesis of single‐stranded collagen type I peptides related to the collagenase cleavage site

Synthetic collagen peptides containing larger numbers of Gly‐Pro‐Hyp repeats are difficult to purify by standard chromatographic procedures. Therefore, efficient strategies are required for the synthesis of higher molecular weight collagen‐type peptides. Applying the Fmoc/tBu chemistry, a comparative analysis of the standard stepwise chain elongation procedure on solid support with the procedure based on the use of the synthons Fmoc‐Gly‐Pro‐Hyp(tBu)‐OH and Fmoc‐Pro‐Hyp‐Gly‐OH was performed. The crude products resulting from the stepwise elongation procedure and from the use of Fmoc‐Gly‐Pro‐Hyp(tBu)‐OH clearly revealed large amounts of microheterogeneities that result from incomplete imino acid acylation as well as from diketopiperazine formation with cleavage of Gly‐Pro units from the growing peptide chain. Conversely, by the use of the Fmoc‐Pro‐Hyp‐Gly‐OH synthon, the quality of the crude products was significantly improved; moreover, protection of the Hyp side chain hydroxyl function is not required using the Fmoc/tBu strategy. With this optimized synthetic procedure, relatively large collagen‐type peptides were obtained in satisfactory yields as highly homogeneous compounds. Copyright © 1999 European Peptide Society and John Wiley & Sons, Ltd.     

A high-resolution 13C-nmr study of collagenlike polypeptides and collagen fibrils in solid state studied by the cross-polarization–magic angle-spinning method. Manifestation of conformation-dependent 13C chemical shifts and application to conformational characterization

We have recorded high-resolution ¹³C-nmr spectra of collagen fibrils in the solid state by the cross-polarization–magic-angle-spinning(CP–MAS)method and analyzed the spectra with reference to those of collagenlike polypeptides. We used two kinds of model polypeptides to obtain reference ¹³C chemical shifts of major amino acid residues of collagen (Gly, Pro, Ala, and Hyp): the 3₁-helical polypeptides [(Gly)_nII, (Pro)_nII, (Hyp)_n, and (Ala? Gly? Gly)_nII], and the triple-helical polypeptides [(Pro? Gly? Pro)_n and (Pro? Ala? Gly)_n]. Examination of the ¹³C chemical shifts of these polypeptides, together with our previous data, showed that the ¹³C chemical shifts of individual amino acid residues are the same, within experimental error (±0.5 ppm), among different polypeptides with different primary sequences, if the conformations are the same. We found that the ¹³C chemical shifts of Ala residues of the 3₁-helical (Ala? Gly? Gly)_n and triple-helical (Pro? Ala? Gly)_n are significantly displaced, compared with those of the α-helix, β-sheet, and silk I form, and can be utilized as excellent probes to examine conformational features of collagen-like polypeptides. Further, the ¹³C chemical shifts of Gly and Pro residues in the triple-helical polypeptides are substantially displaced from those found in (Gly)_nII and (Pro)_nII of the 3₁-helix, reflecting further conformational change from the 3₁-helix to the supercoiled triple helix. In particular, the ¹³C chemical shifts of Gly C ? O carbons of the triple-helical polypeptides are substantially displaced upfield (4.1–5.1 ppm), with respect to those of the 3₁-helical polypeptides. These displacements are interpreted by that Gly C ? O of the former is not involved in NH …? O ? C hydrogen bonds, while this carbon of the latter is linked by these kinds of hydrogen bonds. On the basis of these ¹³C chemical shifts, as reference data for the collagenlike structure, we were able to assign the ¹³C-nmr peaks of Gly, Ala, Pro, and Hyp residues of collagen fibrils, which are in good agreement with the values expected from the model polypeptides mentioned above. We also discuss a plausible conformational change of collagen fibrils during denaturation.     

Structural Aspects of Hydroxyproline-Containing Proteins

Abstract

The occurrence of hydroxyproline (Hyp) in collagen, Clq and acetylcholinesterase (AChE) raises important questions concerning the role of this unusual imino acid in the structure and function of these proteins. Available data on collagen indicate that Hyp is necessary for the normal secretion of the protein after its synthesis and for the integrity of the triple-helical conformation. Studies from our laboratory have dealt with the structural aspects of the posttranslational conversion of proline to hydroxyproline in collagen mediated by prolyl hydroxylase. We proposed that the β-turn conformation at the Pro-Gly segments in the nascent procollagen molecule are the sites of the enzymatic hydroxylation and that this conformation changes over to the collagen-like helix as a result of the hydroxylation process. Recently, we have provided additional experimental support to our proposal by a) synthesizing specific β-turn oligopeptides containing the Pro-Gly as well as Pro-Ala and Pro-DAla sequences and showing that these act as inhibitors of the enzymatic hydroxylation of a synthetic substrate and b) demonstrating, by circular dichroism spectroscopy, the occurrence of a conformational change leading to the triple-helix as a direct consequence of proline hydroxylation in a non-helical polypeptide substrate. We have also observed that the acquisition of hydroxylation results in a significant enhancement of the rate of folding of the polypeptide chain from the unfolded to the triple-helical conformation. We believe that our observations on proline hydroxylation in collagen should also be applicable to Clq and acetylcholineesterase both of which share the general structural and functional properties of collagen in their “tail” regions. Using the techniques employed in collagen studies, one should be able to assess the role of hydroxyproline in the folding, structural stabilities and functions of Clq and AChE. This would also involve the study of the unhydroxylated and hydroxylated precursors of these proteins which may share common structural features with their collagen counterparts. Finally, a systematic study of hydroxyproline-containing peptides and polypeptides has been initiated by us so as to understand the exact manner in which Hyp participates in the formation and stability of the triple-helical conformation in the proteins in which it occurs.     

Selective hydrolysis of triple-helical substrates by matrix metalloproteinase-2 and -9

The role of proteases in the tumor cell invasion process is multifaceted. Members of the matrix metalloproteinase (MMP) family have been implicated in primary and metastatic tumor growth, angiogenesis, and degradation of extracellular matrix (ECM) components. Differentiating between the up-regulation of MMP production and the presence of activated MMPs can be difficult but may well dictate which MMPs are critical to invasion. Because the hydrolysis of collagens is one of the committed steps in ECM turnover, we have investigated selective MMP action on collagenous substrates as a means to evaluate active MMPs. Two triple-helical peptide (THP) models of the MMP-9 cleavage site in type V collagen, alpha1(V)436-450 THP and alpha1(V)436-447 fTHP, were hydrolyzed by MMP-2 and MMP-9 at the Gly-Val bond, analogous to the bond cleaved by MMP-9 in the corresponding native collagen. Kinetic analyses showed k(cat)/K(m) values of 14,002 and 5,449 s(-1)m(-1) for MMP-2 and -9 hydrolysis of alpha1(V)436-447 fTHP, respectively. These values, along with individual k(cat) and K(m) values, are comparable with collagen hydrolysis by MMP-2 and -9. Neither THP was hydrolyzed by MMP-1, -3, -13, or -14. alpha1(V)436-447 fTHP and a general fluorogenic THP were used to screen for triple-helical peptidase activity in alpha(2)beta(1) integrin-stimulated melanoma cells. Binding of the alpha(2)beta(1) integrin resulted in the production of substantial triple-helical peptidase activity, the majority (>95%) of which was non-MMP-2/-9. THPs were found to provide highly selective substrates for members of the MMP family and can be used to evaluate active MMP production in cellular systems.     

The Use of Crown Ethers in Peptide Chemistry – V. Solid-phase Synthesis of Peptides by the Fragment Condensation Approach using Crown Ethers as Non-covalent Protecting Groups

We have previously described the conditions by which peptide synthesis by the solid-phase fragment condensation approach can be carried out using crown ethers as non-covalent protection for the N^α -amino group. Here we demonstrate that the procedure can be extended to large, partially protected peptide fragments possessing free Lys and/or Arg residues. The first step was to ensure that complex formation on the side chain of amino acids was not detrimental to the methodology and exhibited the same solubility and coupling properties as N^α -complexed peptides. Thus, a model hexapeptide was synthesized using Fmoc chemistry containing Lys and Arg residues, which, when complexed with 18-Crown-6, was readily soluble in DCM and coupled quantitatively to a resin-bound tetrapeptide. Two tripeptides were then prepared, one containing a free Ser residue, the other free Tyr, to examine the possible occurrence of side reactions. After coupling using standard conditions only the former tripeptide exhibited the formation of the O-acylation by-product (5%). Another model hexapeptide containing Lys, Tyr, Ser and Asp protected with a TFA-stable adamantyl group was complexed with 18-Crown-6 and coupled to the resin-bound tetrapeptide with near quantative yield. Extending the length of the peptide to 21 and 40 residues, which represent sequences Gly⁵² to Leu⁷² (21-mer) and Pro³³ to Leu⁷² (40-mer) from Rattus norvegicus chaperonin 10 protein, respectively, resulted in partially protected fragments that were readily soluble in water, thus enabling purification by RP-HPLC. Complexation with 18-Crown-6 gave two highly soluble products that coupled to resin-board tetramer with 68% and 50% coupling efficiencies for the 21-mer and 40-mer, respectively. Treatment with 1% DIEA solutions followed by acidolytic cleavage and purification of the major product confirmed that the correct product had been formed, when analysed by amino acid analysis and ESI-MS. These results served to extend the methodology of non-covalent protection of large partially protected peptide fragments for the stepwise fragment condensation of polypeptides.     

The Role of Collagen Charge Clusters in the Modulation of Matrix Metalloproteinase Activity

Members of the matrix metalloproteinase (MMP) family selectively cleave collagens in vivo. Several substrate structural features that direct MMP collagenolysis have been identified. The present study evaluated the role of charged residue clusters in the regulation of MMP collagenolysis. A series of 10 triple-helical peptide (THP) substrates were constructed in which either Lys-Gly-Asp or Gly-Asp-Lys motifs replaced Gly-Pro-Hyp (where Hyp is 4-hydroxy-l-proline) repeats. The stabilities of THPs containing the two different motifs were analyzed, and kinetic parameters for substrate hydrolysis by six MMPs were determined. A general trend for virtually all enzymes was that, as Gly-Asp-Lys motifs were moved from the extreme N and C termini to the interior next to the cleavage site sequence, k_cat/K_m values increased. Additionally, all Gly-Asp-Lys THPs were as good or better substrates than the parent THP in which Gly-Asp-Lys was not present. In turn, the Lys-Gly-Asp THPs were also always better substrates than the parent THP, but the magnitude of the difference was considerably less compared with the Gly-Asp-Lys series. Of the MMPs tested, MMP-2 and MMP-9 most greatly favored the presence of charged residues with preference for the Gly-Asp-Lys series. Lys-Gly-(Asp/Glu) motifs are more commonly found near potential MMP cleavage sites than Gly-(Asp/Glu)-Lys motifs. As Lys-Gly-Asp is not as favored by MMPs as Gly-Asp-Lys, the Lys-Gly-Asp motif appears advantageous over the Gly-Asp-Lys motif by preventing unwanted MMP hydrolysis. More specifically, the lack of Gly-Asp-Lys clusters may diminish potential MMP-2 and MMP-9 collagenolytic activity. The present study indicates that MMPs have interactions spanning the P₂₃–P₂₃′ subsites of collagenous substrates.     

Fullerene‐based inhibitors of HIV‐1 protease

A series of Fmoc‐Phe(4‐aza‐C₆₀)‐OH of fullerene amino acid derived peptides have been prepared by solid phase peptide synthesis, in which the terminal amino acid, Phe(4‐aza‐C₆₀)‐OH, is derived from the dipolar addition to C₆₀ of the Fmoc‐Nα‐protected azido amino acids derived from phenylalanine: Fmoc‐Phe(4‐aza‐C₆₀)‐Lys₃‐OH ( 1 ), Fmoc‐Phe(4‐aza‐C₆₀)‐Pro‐Hyp‐Lys‐OH ( 2 ), and Fmoc‐Phe(4‐aza‐C₆₀)‐Hyp‐Hyp‐Lys‐OH ( 3 ). The inhibition constant of our fullerene aspartic protease PRIs utilized FRET‐based assay to evaluate the enzyme kinetics of HIV‐1 PR at various concentrations of inhibitors. Simulation of the docking of the peptide Fmoc‐Phe‐Pro‐Hyp‐Lys‐OH overestimated the inhibition, while the amino acid PRIs were well estimated. The experimental results show that C₆₀‐based amino acids are a good base structure in the design of protease inhibitors and that their inhibition can be improved upon by the addition of designer peptide sequences. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Structural aspects of hydroxyproline-containing proteins

The occurrence of hydroxyproline (Hyp) in collagen, C1q and acetylcholineesterase (AChE) raises important questions concerning the role of this unusual imino acid in the structure and function of these proteins. Available data on collagen indicate that Hyp is necessary for the normal secretion of the protein after its synthesis and for the integrity of the triple-helical conformation. Studies from our laboratory have dealt with the structural aspects of the posttranslational conversion of proline to hydroxyproline in collagen mediated by prolyl hydroxylase. We proposed that the beta-turn conformation at the Pro-Gly segments in the nascent procollagen molecule are the sites of the enzymatic hydroxylation and that this conformation changes over to the collagen-like helix as a result of the hydroxylation process. Recently, we have provided additional experimental support to our proposal by a) synthesizing specific beta-turn oligopeptides containing the Pro-Gly as well as Pro-Ala and Pro-DAla sequences and showing that these act as inhibitors of the enzymatic hydroxylation of a synthetic substrate and b) demonstrating, by circular dichroism spectroscopy, the occurrence of a conformational change leading to the triple-helix as a direct consequence of proline hydroxylation in a non-helical polypeptide substrate. We have also observed that the acquisition of hydroxylation results in a significant enhancement of the rate of folding of the polypeptide chain from the unfolded to the triple-helical conformation. We believe that our observations on proline hydroxylation in collagen should also be applicable to C1q and acetylcholineesterase both of which share the general structural and functional properties of collagen in their "tail" regions. Using the techniques employed in collagen studies, one should be able to assess the role of hydroxyproline in the folding, structural stabilities and functions of C1q and AChE. This would also involve the study of the unhydroxylated and hydroxylated precursors of these proteins which may share common structural features with their collagen counterparts. Finally, a systematic study of hydroxyproline-containing peptides and polypeptides has been initiated by us so as to understand the exact manner in which Hyp participates in the formation and stability of the triple-helical conformation in the proteins in which it occurs.     

Selective inactivation of rabbit muscle glycerophosphate dehydrogenase by diazotized 3-aminopyridine adenine dinucleotide.

Incorporation of a proline analog into collagen polypeptides was studied by incubating matrix-free tendon cells from 17-day-old chick embryos with cis-4-hydroxy-l-proline. Velocity sedimentation of intracellular polypeptides provided further evidence that incorporation of the analog into protein prevented the pro-α- and pro-γ-chains of procollagen from folding into a stable triple-helical conformation. The size of the newly synthesized intracellular and extracellular protein was examined under conditions which prevented proteolysis during processing of the samples. In contrast to previous observations, the results demonstrated that there was little if any intracellular degradation of nonhelical pro-α-and pro-γ-chains containing the proline analog, and a fraction of the nonhelical pro-γ-chains was secreted into the medium without extensive degradation. In further studies, the cells were incubated with ¹⁴C lysine, and the synthesis of glycosylated hydroxylysyl residues was measured in control cells and in cells incubated with cis-4-hydroxy-l-proline. The results demonstrated that the content of glycosylated hydroxylysyl residues in nonhelical pro-γ-chains containing cis-4-hydroxy-l-proline was increased twofold as compared to the triple-helical procollagen in control cells. The results suggested that under control conditions folding into the triplehelical conformation limits the extent of glycosylation of collagen. If folding is prevented or delayed, procollagen polypeptides are more extensively glycosylated.     

Contribution of tertiary amides to the conformational stability of collagen triple helices

The collagen triple helix is composed of three polypeptide strands, each with a sequence of repeating (Xaa-Yaa-Gly) triplets. In these triplets, Xaa and Yaa are often tertiary amides: L-proline (Pro) and 4(R)-hydroxy-L-proline (Hyp). To determine the contribution of tertiary amides to triple-helical stability, Pro and Hyp were replaced in synthetic collagen mimics with a non-natural acyclic tertiary amide: N-methyl-L-alanine (meAla). Replacing a Pro or Hyp residue with meAla decreases triple-helical stability. Ramachandran analysis indicates that meAla residues prefer to adopt straight phi and psi angles that are dissimilar from those of the Pro and Hyp residues in the collagen triple helix. Replacement with meAla decreases triple-helical stability more than does replacement with Ala. All of the peptide bonds in triple-helical collagen are in the trans conformation. Although an Ala residue greatly prefers the trans conformation, a meAla residue exists as a nearly equimolar mixture of trans and cis conformers. These findings indicate that the favorable contribution of Pro and Hyp to the conformational stability of collagen triple helices arises from factors other than their being tertiary amides.     

Synthesis and application of Nα‐Fmoc‐Nπ‐4‐methoxybenzyloxymethylhistidine in solid phase peptide synthesis

The 4‐methoxybenzyloxymethyl (MBom) group was introduced at the N^π‐position of the histidine (His) residue by using a regioselective procedure, and its utility was examined under standard conditions used for the conventional and the microwave (MW)‐assisted solid phase peptide synthesis (SPPS) with 9‐fluorenylmethyoxycarbonyl (Fmoc) chemistry. The N^π‐MBom group fulfilling the requirements for the Fmoc strategy was found to prevent side‐chain‐induced racemization during incorporation of the His residue even in the case of MW‐assisted SPPS performed at a high temperature. In particular, the MBom group proved to be a suitable protecting group for the convergent synthesis because it remains attached to the imidazole ring during detachment of the protected His‐containing peptide segments from acid‐sensitive linkers by treatment with a weak acid such as 1% trifluoroacetic acid in dichloromethane. We also demonstrated the facile synthesis of Fmoc‐His(π‐MBom)‐OH with the aid of purification procedure by crystallization to effectively remove the undesired τ‐isomer without resorting to silica gel column chromatography. This means that the present synthetic procedure can be used for large‐scale production without any obstacles. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Building blocks for the synthesis of post‐translationally modified glycated peptides and proteins

Growing interest in synthetic peptides carrying post‐traslational modifications, in general, and the Amadori modification in particular, raises the need for specific building blocks that can be used in stepwise peptide synthesis. Herein, we report the synthesis of N^α‐Fmoc‐Lys‐OH derivatives containing N^ε‐1‐deoxyfructopyranosyl moiety. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.     

Nucleobase‐caged peptide nucleic acids: PNA/PNA duplex destabilization and light‐triggered PNA/PNA recognition

The 2‐(o‐nitrophenyl)‐propyl (NPP) group is used as caging group to mask the nucleobases adenine and cytosine in N‐(2‐aminoethyl)glycine peptide nucleic acids (aeg‐PNA). The adeninyl and cytosinyl nucleo amino acid building blocks Fmoc‐a^NPP‐aeg‐OH and Fmoc‐c^NPP‐aeg‐OH were synthesized and incorporated into PNA sequences by Fmoc solid phase synthesis relying on high stability of the NPP nucleobase protecting group toward Fmoc‐cleavage, coupling, capping, and resin cleavage conditions. Removal of the nucleobase caging group was achieved by UV‐LED irradiation at 365 nm. The nucleobase caging groups provided sterical crowding effecting the Watson–Crick base pairing, and thereby, the PNA double strand stabilities. Duplex formation can completely be suppressed for complementary PNA containing caging groups in both strands. PNA/PNA recognition can be completely restored by UV light‐triggered release of the photolabile protecting group. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Induction of protein-like molecular architecture by self-assembly processes

One of the most intriguing self-assembly processes is the folding of peptide chains into native protein structures. We have developed a method for building protein-like structural motifs that incorporate sequences of biological interest. A lipophilic moiety is attached onto an N(alpha)-amino group of a peptide chain, resulting in a 'peptide-amphiphile'. The alignment of amphiphilic compounds at the lipid solvent interface is used to facilitate peptide alignment and structure initiation and propagation. Peptide-amphiphiles containing potentially triple-helical structural motifs have been synthesized. The resultant head group structures have been characterized by circular dichroism and NMR spectroscopies. Evidence for a self-assembly process of peptide-amphiphiles has been obtained from: (a) circular dichroism spectra and melting curves characteristic of triple-helices, (b) one- and two-dimensional NMR spectra indicative of stable triple-helical structure at low temperatures and melted triple-helices at high temperatures, and (c) pulsed-field gradient NMR experiments demonstrating different self-diffusion coefficients between proposed triple-helical and non-triple-helical species. The peptide-amphiphiles described here provide a simple approach for building stable protein structural motifs using peptide head groups.     

Preventing aspartimide formation in Fmoc SPPS of Asp‐Gly containing peptides — practical aspects of new trialkylcarbinol based protecting groups

In our efforts to develop a universal solution to the problem of aspartimide formation in Fmoc SPPS, we investigated the application of our new β‐trialkylmethyl protected aspartic acid building blocks to the synthesis of peptides containing the Asp‐Gly motif. The N^α‐Fmoc aspartic acid β‐tri‐(ethyl/propyl/butyl)methyl esters were used in the synthesis of the classic model peptide scorpion toxin II (VKDGYI), and their effectiveness in minimising aspartimide formation during extended piperidine treatments was evaluated. Furthermore, we compared their efficacy against that of the commonly used approach of adding acids to the Fmoc deprotection solution. Finally, we applied our aspartic acid building blocks to the stepwise Fmoc SPPS of teduglutide, a human GLP‐2 analogue, whose synthesis is made challenging by extensive aspartimide formation. In all experiments, our approach led to almost complete reduction of aspartimide formation with accompanied suppression of aspartic acid epimerisation. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis and folding of native collagen III model peptides.

Solid-phase synthesis of triple-helical peptides, including native collagen III sequences, was started with a trimeric branch, based upon the lysine dipeptide [Fields, C. G., Mickelson, D. J., Drake, S. L., McCarthy, J. B., and Fields, G. B. (1993) J. Biol. Chem. 268, 14153-14160]. Branch synthesis was modified, using TentaGel R as resin, p-hydroxybenzyl alcohol (HMP) as linker, Dde as N(epsilon)-protective group, and HATU/HOAT as coupling reagent. Three homotrimeric sequences, each containing the Gly 606-Gly 618 portion of human type III collagen, were added to the amino functions of the branch. The final incorporation of GlyProHyp triplets, stabilizing the collagen III triple helix, was performed by using protected GlyProHyp tripeptides, each containing tert-butylated hydroxyproline [P(tBu)] instead of hydroxyproline (P). Among the protected tripeptides FmocP(tBu)PG, FmocPP(tBu)G, and FmocGPP(tBu), prepared manually on a chlorotrityl resin, incorporation of FmocPP(tBu)Gly was best suited for synthesis of large and stable peptides, such as PPG(8), containing 8 (PPG)(3) trimers (115 residues, 10 610 Da). The structures of five peptides, differing from each other by the type and number of the triplets incorporated, were verified by MALDI-TOF-MS. Their conformations and thermodynamic data were studied by circular dichroism and differential scanning calorimetry. Except for PPG(8), containing 8 (PPG)(3) trimers with hydroxyproline in the X position and adopting a polyproline II structure, all peptides were triple-helical in 0.1 M acetic acid and their thermal stabilities ranged from t(1/2) = 39. 4 to t(1/2) = 62.5 degrees C, depending on the identity and number of the triplets used. Similar values of the van't Hoff enthalpy, DeltaH(vH), derived from melting curves, and the calorimetric enthalpy, DeltaH(cal), obtained from heat capacity curves, indicate a cooperative ratio of CR = DeltaH(vH)/DeltaH(cal) = 1, establishing a two-state process for unfolding of THP(III) peptides. The independence of the transition temperatures t(1/2) on peptide concentration as well as equilibrium centrifugation data indicate monomolecular dimer(f) to dimer(u) (F(2) <--> U(2)) transitions and, in addition, bimolecular dimer(f) to monomer(u) transitions (F(2) <--> 2U). The dominance of the concentration-independent monomolecular reaction over the concentration-dependent bimolecular reaction makes thermal unfolding of THP(III) peptides appear to be monomolecular. If one designates the molecularity described by the term pseudomonomolecular, unfolding of the dimeric peptides PPG(6-8) follows a two-state, pseudomonomolecular reaction.     

Synthesis of Peptide Nucleic Acid Monomers

Abstract

The chemical synthesis of peptide nucleic acid (PNA) monomers is described using Fmoc (backbone), anisoyl (cytosine, adenine), 4-tert-butylbenzoyl (cytosine) and isobutyryl/diphenylcarbamoyl (guanine) protecting group combinations. For the guanine monomer the alkylation was realized both in a Mitsunobu [DIAD, triphenylphosphine or (4-dimethylaminophenyl)diphenylphosphine, tert-butyl glycolate] and in a low-temperature, sodium-hydride mediated alkylation (tert-butyl bromoacetate) to give the N⁹ -substituted derivative.     

Amino-acid sequence and cell-adhesion activity of a fibril-forming collagen from the tube worm Riftia pachyptila living at deep sea hydrothermal vents.

We have determined the amino acid sequence of the alpha chain of a fibril-forming collagen from the body wall of the marine invertebrate Riftia pachyptila (vestimentifera) by Edman degradation. The pepsin-solubilized collagen chain consists of a 1011-residue triple-helical domain and short remnants of N- and C-telopeptides. The triple-helical sequence showed one imperfection of the collagen Gly-Xaa-Yaa triplet repeat structure due to a Gly-->Ala substitution. This imperfection is correlated to a prominent kink in the molecule observed by electron microscopy. No strong sequence similarity was found with the fibril-forming vertebrate collagen types I-III, V and XI except for the invariant Gly residues. However, one of the two consensus cross-linking sequences was well conserved. The Riftia collagen shared with the vertebrate collagens many post-translational modifications. About 50% of the Pro and Lys residues are found in the Yaa position and were extensively hydroxylated to 4-hydroxyproline (4Hyp) and hydroxylysine (Hyl). A few proline residues in Xaa position were partially hydroxylated to either 4Hyp or 3Hyp. Despite the low sequence similarity, Riftia collagen was a potent adhesion substrate for two human cell lines. Cell adhesion could be inhibited by antibodies against the integrin beta 1 subunit but not by RGD peptides. This biological activity is apparently conserved in fibril-forming collagens of distantly related species but does not require the two RGD sequences present in Riftia collagen.