Uniform band intensities in fluorescent dye terminator sequencing.

The use of Cyanine dye (Cy5 and Cy5.5) labeled dideoxy terminators with Thermo Sequenase DNA polymerase in DNA sequencing provides uniform band intensity, improved sequence read-length, and accuracy. It also greatly improves the ability to detect single base heterozygotes with dye-terminator sequencing method.     

New dye-labeled terminators for improved DNA sequencing patterns.

We have used two new dye sets for automated dye-labeled terminator DNA sequencing. One set consists of four, 4,7-dichlororhodamine dyes (d-rhodamines). The second set consists of energy-transfer dyes that use the 5-carboxy-d-rhodamine dyes as acceptor dyes and the 5- or 6-carboxy isomers of 4'-aminomethylfluorescein as the donor dye. Both dye sets utilize a new linker between the dye and the nucleotide, and both provide more even peak heights in terminator sequencing than the dye-terminators consisting of unsubstituted rhodamine dyes. The unsubstituted rhodamine terminators produced electropherograms in which weak G peaks are observed after A peaks and occasionally C peaks. The number of weak G peaks has been reduced or eliminated with the new dye terminators. The general improvement in peak evenness improves accuracy for the automated base-calling software. The improved signal-to-noise ratio of the energy-transfer dye-labeled terminators combined with more even peak heights results in successful sequencing of high molecular weight DNA templates such as bacterial artificial chromosome DNA.     

Uniform Band Intensities in Fluorescent Dye Terminator Sequencing

Abstract

The use of Cyanine dye (Cy^TM 5 and Cy5.5) labeled dideoxy terminators with Thermo Sequenase^TM DNA polymerase in DNA sequencing provides uniform band intensity, improved sequence read-length, and accuracy. It also greatly improves the ability to detect single base heterozygotes with dye-terminator sequencing method.     

Synthesis and application of charge-modified dye-labeled dideoxynucleoside-5'-triphosphates to 'direct-load' DNA sequencing

A novel series of charge-modified, dye-labeled 2′,3′-dideoxynucleoside-triphosphate terminators were synthesized and evaluated as reagents for DNA sequencing. These terminators possess an advantage over existing reagents in that no purification is required to remove unreacted nucleotide or associated breakdown products prior to electrophoretic separation of the sequencing fragments. This obviates the need for a time consuming post-reaction work up, allowing direct loading of DNA sequencing reaction mixtures onto a slab gel. Thermo Sequenase™ II DNA polymerase poorly incorporates the charge-modified terminators compared with regular dye-labeled terminators. However, extending the linker arm between dye and nucleotide and using a mutant form of a related DNA polymerase can in part mitigate the decrease in substrate efficiency. We also present evidence that these charge-modified terminators can relieve gel compression artefacts when used with dGTP in sequencing reactions.     

Synthesis and energy transfer efficiency of FRET terminators derived from different linkers

A number of different energy transfer dye labeled-cassettes were synthesized using aminoacid based trifunctional linkers and coupled to the propargylamino-substituted dideoxynucleoside-5'-triphosphates (ddNTPs). These terminators were evaluated for their energy transfer efficiency and DNA sequencing potential using thermostable DNA polymerase.     

Synthesis and Energy Transfer Efficiency of FRET Terminators Derived from Different Linkers

Abstract

A number of different energy transfer dye labeled-cassettes were synthesized using aminoacid based trifunctional linkers and coupled to the propargylamino-substituted dideoxynucleoside-5′-triphosphates (ddNTPs). These terminators were evaluated for their energy transfer efficiency and DNA sequencing potential using thermostable DNA polymerase.     

Efficient incorporation of positively charged 2', 3'-dideoxynucleoside-5'-triphosphates by DNA polymerases and their application in 'direct-load' DNA sequencing

A series of charge-modified, dye-labeled 2′, 3′-dideoxynucleoside-5′-triphosphates have been synthesized and evaluated as reagents for dye-terminator DNA sequencing. Unlike the commonly used dye-labeled terminators, these terminators possess a net positive charge and migrate in the opposite direction to dye-labeled Sanger fragments during electrophoresis. Post-sequencing reaction purification is not required to remove unreacted nucleotide or associated breakdown products prior to electrophoresis. Thus, DNA sequencing reaction mixtures can be loaded directly onto a separating medium such as a sequencing gel. The charge-modified nucleotides have also been shown to be more efficiently incorporated by a number of DNA polymerases than regular dye-labeled dideoxynucleotide terminators or indeed normal dideoxynucleoside-5′-triphosphates.     

Possible sources of dye-related signal correlation bias in two-color DNA microarray assays

DNA microarray analyses commonly use two spectrally distinct fluorescent labels to simultaneously compare different mRNA pools. Signal correlation bias currently limits accepted resolution to twofold changes in gene expression. This bias was investigated by (i) examining fluorescence and absorption spectra and changes in relative fluorescence of DNAs labeled with the Cy3, Cy5, Alexa Fluor 555, and Alexa Fluor 647 dyes and by (ii) using homotypic hybridization assays to compare the Cy dye pair with the Alexa Fluor dye pair. Cy3 or Cy5 dye-labeled DNA exhibited reduced fluorescence and absorption anomalies that were eliminated by nuclease treatment, consistent with fluorescence quenching that arises from dye-dye or dye-DNA-dye interactions. Alexa Fluor 555 and Alexa Fluor 647 dye-labeled DNA exhibited little or no such anomalies. In microarray hybridization, the Alexa Fluor dye pair provided higher signal correlation coefficients (R2) than did the Cy dye pair; at the 95% prediction level, a 1.3-fold change in gene expression was significant using the Alexa Fluor dye pair. Lowered signal correlation of the Cy dye pair was associated with high variance in Cy5 dye signals. These results indicate that fluorescence quenching may be a source of signal bias associated with the Cy dye pair.     

Structures of an Apo and a Binary Complex of an Evolved Archeal B Family DNA Polymerase Capable of Synthesising Highly Cy-Dye Labelled DNA

Thermophilic DNA polymerases of the polB family are of great importance in biotechnological applications including high-fidelity PCR. Of particular interest is the relative promiscuity of engineered versions of the exo- form of polymerases from the Thermo- and Pyrococcales families towards non-canonical substrates, which enables key advances in Next-generation sequencing. Despite this there is a paucity of structural information to guide further engineering of this group of polymerases. Here we report two structures, of the apo form and of a binary complex of a previously described variant (E10) of Pyrococcus furiosus (Pfu) polymerase with an ability to fully replace dCTP with Cyanine dye-labeled dCTP (Cy3-dCTP or Cy5-dCTP) in PCR and synthesise highly fluorescent “CyDNA” densely decorated with cyanine dye heterocycles. The apo form of Pfu-E10 closely matches reported apo form structures of wild-type Pfu. In contrast, the binary complex (in the replicative state with a duplex DNA oligonucleotide) reveals a closing movement of the thumb domain, increasing the contact surface with the nascent DNA duplex strand. Modelling based on the binary complex suggests how bulky fluorophores may be accommodated during processive synthesis and has aided the identification of residues important for the synthesis of unnatural nucleic acid polymers.     

Synthesis of novel tyrosinyl FRET cassettes, terminators, and their potential use in DNA sequencing

Fluorescence resonance energy transfer (FRET) dye labeled cassettes and terminators with one or more donor dyes (fluorescein) and acceptor dye (rhodamine dyes) with benzofuran or tyrosine linker moieties were synthesized. These terminators were evaluated for their energy transfer and DNA sequencing potential using thermostable DNA polymerase.     

Cyanine dye dUTP analogs for enzymatic labeling of DNA probes.

Fluorescence in situ hybridization (FISH) has become and indispensable tool in a variety of areas of research and clinical diagnostics. Many applications demand an approach for simultaneous detection of multiple target sequences that is rapid and simple, yet sensitive. In this work, we describe the synthesis of two new cyanine dye-labeled dUTP analogs, Cy3-dUTP and Cy5-dUTP. They are efficient substrates for DNA polymerases and can be incorporated into DNA probes by standard nick translation, random priming and polymerase chain reactions. Optimal labeling conditions have been identified which yield probes with 20-40 dyes per kilobase. The directly labeled DNA probes obtained with these analogs offer a simple approach for multicolor multisequence analysis that requires no secondary detection reagents and steps.     

Synthesis of Novel Tyrosinyl FRET Cassettes,Terminators, and Their Potential Use in DNA Sequencing

Abstract

Fluorescence resonance energy transfer (FRET) dye labeled cassettes and terminators with one or more donor dyes (fluorescein) and acceptor dye (rhodamine dyes) with benzofuran or tyrosine linker moieties were synthesized. These terminators were evaluated for their energy transfer and DNA sequencing potential using thermostable DNA polymerase.     

Synthesis and properties of fluorescent NF-kappa B-recognizing hairpin oligodeoxyribonucleotide decoys

Intramolecular fluorescence quenching of cyanine dyes was investigated using a model hairpin oligonucleotide decoy encoding a NF-kappaB p50 subunit binding site. Two types of hairpin oligonucleotides were synthesized: (1) 5'-(6-aminohexyl)- and 3'-(3-aminopropyl)-linked (I); (2) 5'-(6-aminohexyl)- and 3'-[3-(3-hydroxypropyldithio)propyl]-linked (II). Oligonucleotide I was covalently modified using monofunctional either Cy3- or Cy5.5-N-hydroxysuccinimide esters. Using reverse-phase HPLC, mono-and dicyanineamide derivatives of I were isolated. Mono-Cy3-modified derivatives of I, but not the mono-Cy5.5-modified derivatives, showed a 2-fold higher Cy3 fluorescence intensity compared to the free dye. There was no detectable difference in fluorescence between the di-Cy3 derivative of I and the free dye at the same concentration. However, there was a 4-fold quenching of fluorescence in the case of the di-Cy5.5 derivative of the same hairpin oligonucleotide. The quenching of Cy5.5 fluorescence could not be explained by the interaction of Cy5.5 with nucleotide bases as demonstrated by incubating free Cy5.5 dye with oligonuclotides. The quenching effect was further investigated using an oligonucleotide bearing a cleavable 3'-amino-terminated linker bearing an S-S bond (III). After modification of the 5'- and 3'-end of oligonucleotide III with a Cy5.5 monofunctional hydroxysuccinimide ester, a 70-75% quenching of fluorescence was observed. Fluorescence was 100% dequenched after the reduction of S-S bond. The obtained result unequivocally demonstrates that the formation of intramolecular Cy5.5 dimers is the dominant mechanism of fluorescence quenching in symmetric dye-dye hairpin decoy beacons.     

New donor-acceptor pair for fluorescent immunoassays by energy transfer

A novel F?rster donor-acceptor dye pair for an immunoassay based on resonance energy transfer (RET) is characterized with respect to its photophysical properties. As donor and acceptor, we chose the long-wavelength excitable cyanine dyes Cy5 and Cy5.5, respectively. Due to the perfect spectral overlap, an exceptionally high R(0) value of 68.7 A is obtained in solution. For biochemical applications, antibodies (IgG) are labeled with Cy5, while a tracer for competitive binding is synthesized by labeling bovine serum albumin (BSA) with an analyte derivative and Cy5.5. Binding the dyes to proteins at a low dye/protein ratio increases the fluorescence lifetimes and quantum yields, leading to an enhanced R(0) value of 85.2 A. At higher dye/protein ratios, the formation of nonfluorescent dimeric species causes a decrease in the fluorescence lifetime and quantum yield due to RET from monomeric dyes to dimers within one protein molecule. The F?rster distances could be calculated using the dimer absorption spectra to 83.9 and 83.6 A for Cy5 and Cy5.5, respectively. Upon binding of the Cy5-labeled IgG to the tracer, efficient quenching of Cy5 fluorescence is observed. Steady-state and time-resolved measurements reveal that approximately 50% of the quenching results in F?rster-type RET, while the residual quenching effect is caused by static quenching processes. The applicability of this dye pair is demonstrated in a homogeneous competitive immunoassay for the pesticide simazine.     

The influence of fluorescent dye structure on the electrophoretic mobility of end-labeled DNA.

Over the past 10 years, fluorescent end-labeling of DNA fragments has evolved into the preferred method of DNA detection for a wide variety of applications, including DNA sequencing and PCR fragment analysis. One of the advantages inherent in fluorescent detection methods is the ability to perform multi-color analyses. Unfortunately, labeling DNA fragments with different fluorescent tags generally induces disparate relative electrophoretic mobilities for the fragments. Mobility-shift corrections must therefore be applied to the electrophoretic data to compensate for these effects. These corrections may lead to increased errors in the estimation of DNA fragment sizes and reduced confidence in DNA sequence information. Here, we present a systematic study of the relationship between dye structure and the resultant electrophoretic mobility of end-labeled DNA fragments. We have used a cyanine dye family as a paradigm and high-resolution capillary array electrophoresis (CAE) as the instrumentation platform. Our goals are to develop a general understanding of the effects of dyes on DNA electrophoretic mobility and to synthesize a family of DNA end-labels that impart identically matched mobility influences on DNA fragments. Such matched sets could be used in DNA sequencing and fragment sizing applications on capillary electrophoresis instrumentation.     

Novel water-soluble near-infrared cyanine dyes: synthesis, spectral properties, and use in the preparation of internally quenched fluorescent probes

In this paper, we describe the synthesis and the photophysical properties of two novel near-infrared (NIR) cyanine dyes (NIR5.5-2 and NIR7.0-2) which are water soluble potential substitutes of the commercially available Cy 5.5 and Cy 7.0 fluorescent labels respectively. For each one of these cyanine dyes, the synthetic strategy relies on the postsynthetic derivatization of a cyanine precursor in order to introduce the key functionalities required for bioconjugation of these NIR fluorophores. For NIR5.5-2, a reactive amino group was acylated with an original trisulfonated linker for water solubility. For NIR7.0-2, a vinylic chlorine atom was derivatized through a SRN1 reaction for the introduction of a monoreactive carboxyl group for labeling purposes. Unexpectedly, when these two fluorophores were closely associated within a peptidic architecture, mutual fluorescence quenching between NIR5.5-2 and NIR7.0-2 was observed both at 705 (NIR5.5-2) and 798 nm (NIR7.0-2). On the basis of this property, a novel internally quenched caspase-3-sensitive NIR fluorescent probe was prepared.     

PolyPhred: automating the detection and genotyping of single nucleotide substitutions using fluorescence-based resequencing.

Fluorescence-based sequencing is playing an increasingly important role in efforts to identify DNA polymorphisms and mutations of biological and medical interest. The application of this technology in generating the reference sequence of simple and complex genomes is also driving the development of new computer programs to automate base calling (Phred), sequence assembly (Phrap) and sequence assembly editing (Consed) in high throughput settings. In this report we describe a new computer program known as PolyPhred that automatically detects the presence of heterozygous single nucleotide substitutions by fluorescencebased sequencing of PCR products. Its operations are integrated with the use of the Phred, Phrap and Consed programs and together these tools generate a high throughput system for detecting DNA polymorphisms and mutations by large scale fluorescence-based resequencing. Analysis of sequences containing known DNA variants demonstrates that the accuracy of PolyPhred with single pass data is >99% when the sequences are generated with fluorescent dye-labeled primers and approximately 90% for those prepared with dye-labeled terminators.     

基于荧光染料Cy5.5标记的引物延伸法鉴定细菌RNA剪切加工位点

【背景】传统引物延伸法常与放射性标记结合使用,但由于放射性元素半衰期短、危害人体健康及严格的操作要求等限制了其在一般实验室的广泛使用。因此,开发新型非放射性引物延伸法成为当前研究的热点。【目的】建立非放射性的引物延伸法,并利用该方法实现对细菌RNA剪切加工位点的鉴定。【方法】将包含RNA剪切位点的序列克隆至双荧光报告系统,然后利用荧光染料Cy5.5标记的特异性靶向mcherry寡核苷酸引物进行延伸,并辅以Northern blotting、RT-qPCR等技术,确定RNA剪切加工的精确位点。【结果】鉴定了来自解纤维梭菌cip-cel mRNA中的2个剪切加工位点均位于颈环结构下游的单链区域,且在剪切位点附近未发现保守序列。【结论】基于Cy5.5标记的引物延伸法能够精确鉴定RNA剪切加工位点,且与传统的放射性引物延伸法相比,该方法具有更高的安全性和更快的检测速度,能够满足一般实验室的实验要求。     

The Effect of Dye-Dye Interactions on the Spatial Resolution of Single-Molecule FRET Measurements in Nucleic Acids

We study the effect of dye-dye interactions in labeled double-stranded DNA molecules on the Förster resonance energy transfer (FRET) efficiency at the single-molecule level. An extensive analysis of internally labeled double-stranded DNA molecules in bulk and at the single-molecule level reveals that donor-acceptor absolute distances can be reliably extracted down to ∼3-nm separation, provided that dye-dye quenching is accounted for. At these short separations, we find significant long-lived fluorescence fluctuations among discrete levels originating from the simultaneous and synchronous quenching of both dyes. By comparing four different donor-acceptor dye pairs (TMR-ATTO647N, Cy3-ATTO647N, TMR-Cy5, and Cy3-Cy5), we find that this phenomenon depends on the nature of the dye pair used, with the cyanine pair Cy3-Cy5 showing the least amount of fluctuations. The significance of these results is twofold: First, they illustrate that when dye-dye quenching is accounted for, single-molecule FRET can be used to accurately measure inter-dye distances, even at short separations. Second, these results are useful when deciding which dye pairs to use for nucleic acids analyses using FRET.     

A binary Cy3 aptamer probe composed of folded modules

Aptamers are short single-stranded DNA or RNA sequences that are selected in vitro based on their high affinity to a target molecule. Dye-binding aptamers are promising tools for real-time detection of not only DNA or RNA sequences but also proteins of interest both in vitro and in vivo. In this study, we aimed to isolate an RNA aptamer to Cy3, a widely used, membrane-permeant, and nontoxic fluorescent cyanine dye. Extensive selection of affinity RNA molecules to Cy3 yielded a unique sequence aptamer named Cy3_apt. The selected Cy3_apt was 83 nucleotides long and successfully shortened to 49 nucleotides long with increased affinity to Cy3 by multiple base changes. The shortest Cy3_apt is composed of two separate hairpin modules that are required for the affinity to Cy3 as monitored by the surface plasmon resonance (SPR) assay. Also, the fluorescence of Cy3 increased on binding to Cy3_apt. The two modules of Cy3_apt, when detached from each other, functioned as a binary aptamer probe. We demonstrate that the binary Cy3_apt probe is applicable to the detection of target oligonucleotides or RNA-RNA interaction by tagging with target sequences. This binary probe consists of two folded modules, referred to as a folded binary probe.