Expression and mutational analysis of amino acid residues involved in catalytic activity in a ribonuclease MC1 from the seeds of bitter gourd

The ribonuclease MC1 (RNase MC1) from seeds of bitter gourd (Momordica charantia) consists of 190 amino acids and belongs to the RNase T2 family, including fungal RNases typified by RNase Rh from Rhizopus niveus. We expressed RNase MC1 in Escherichia coli cells and made use of site-directed mutagenesis to identify essential amino acid residues for catalytic activity. Mutations of His34 and His88 to Ala completely abolished the enzymatic activity, and considerable decreases in the enzymatic activity were observed in cases of mutations of His83, Glu84, and Lys87, when yeast RNA was used as a substrate. Kinetic parameters for the enzymatic activity of the mutants of His83, Glu84, and Lys87 were analyzed using a dinucleoside monophosphate CpU. Km values for the mutants were approximately like that for wild-type, while k(cat) values were decreased by about 6 to 25-fold. These results suggest that His34, His83, Glu84, Lys87, and His88 in RNase MC1 may be involved in the catalytic function. These observation suggests that RNase MC1 from a plant catalyzes RNA degradation in a similar manner to that of fungal RNases.     

Histidine-40 of ribonuclease T1 acts as base catalyst when the true catalytic base, glutamic acid-58, is replaced by alanine

Mechanisms for the ribonuclease T1 (RNase T1; EC 3.1.27.3) catalyzed transesterification reaction generally include the proposal that Glu58 and His92 provide general base and general acid assistance, respectively [Heinemann, U., & Saenger, W. (1982) Nature (London) 299, 27-31]. This view was recently challenged by the observation that mutants substituted at position 58 retain high residual activity; a revised mechanism was proposed in which His40, and not Glu58, is engaged in catalysis as general base [Nishikawa, S., Morioka, H., Kim, H., Fuchimura, K., Tanaka, T., Uesugi, S., Hakoshima, T., Tomita, K., Ohtsuka, E., & Ikehara, M. (1987) Biochemistry 26, 8620-8624]. To clarify the functional roles of His40, Glu58, and His92, we analyzed the consequences of several amino acid substitutions (His40Ala, His40Lys, His40Asp, Glu58Ala, Glu58Gln, and His92Gln) on the kinetics of GpC transesterification. The dominant effect of all mutations is on Kcat, implicating His40, Glu58, and His92 in catalysis rather than in substrate binding. Plots of log (Kcat/Km) vs pH for wild-type, His40Lys, and Glu58Ala RNase T1, together with the NMR-determined pKa values of the histidines of these enzymes, strongly support the view that Glu58-His92 acts as the base-acid couple. The curves also show that His40 is required in its protonated form for optimal activity of wild-type enzyme. We propose that the charged His40 participates in electrostatic stabilization of the transition state; the magnitude of the catalytic defect (a factor of 2000) from the His40 to Ala replacement suggests that electrostatic catalysis contributes considerably to the overall rate acceleration. For Glu58Ala RNase T1, the pH dependence of the catalytic parameters suggests an altered mechanism in which His40 and His92 act as base and acid catalyst, respectively. The ability of His40 to adopt the function of general base must account for the significant activity remaining in Glu58-mutated enzymes.     

Computer modelling studies on the mechanism of action of ribonuclease T1.

The mechanism of action of ribonuclease (RNase) T1 is still a matter of considerable debate as the results of x-ray, 2-D nmr and site-directed mutagenesis studies disagree regarding the role of the catalytically important residues. Hence computer modelling studies were carried out by energy minimisation of the complexes of RNase T1 and some of its mutants (His40Ala, His40Lys, and Glu58Ala) with the substrate guanyl cytosine (GpC), and of native RNase T1 with the reaction intermediate guanosine 2',3'-cyclic phosphate (G greater than p). The puckering of the guanosine ribose moiety in the minimum energy conformer of the RNase T1-GpC (substrate) complex was found to be O4'-endo and not C3'-endo as in the RNase T1-3'-guanylic acid (inhibitor/product) complex. A possible scheme for the mechanism of action of RNase T1 has been proposed on the basis of the arrangement of the catalytically important amino acid residues His40, Glu58, Arg77, and His92 around the guanosine ribose and the phosphate moiety in the RNase T1-GpC and RNase T1-G greater than p complexes. In this scheme, Glu58 serves as the general base group and His92 as the general acid group in the transphosphorylation step. His40 may be essential for stabilising the negatively charged phosphate moiety in the enzyme-transition state complex.     

Crystal structure at 1.5-A resolution of Pyrus pyrifolia pistil ribonuclease responsible for gametophytic self-incompatibility

The crystal structure of the Pyrus pyrifolia pistil ribonuclease (S(3)-RNase) responsible for gametophytic self-incompatibility was determined at 1.5-A resolution. It consists of eight helices and seven beta-strands, and its folding topology is typical of RNase T(2) family enzymes. Based on a structural comparison of S(3)-RNase with RNase Rh, a fungal RNase T(2) family enzyme, the active site residues of S(3)-RNase assigned were His(33) and His(88) as catalysts and Glu(84) and Lys(87) as stabilizers of an intermediate in the transition state. Moreover, amino acid residues that constitute substrate binding sites of the two RNases could be superimposed geometrically. A hypervariable (HV) region that has an S-allele-specific sequence comprises a long loop and short alpha-helix. This region is far from the active site cleft, exposed on the molecule's surface, and positively charged. Four positively selected (PS) regions, in which the number of nonsynonymous substitutions exceeds that of synonymous ones, are located on either side of the active site cleft, and accessible to solvent. These structural features suggest that the HV or PS regions may interact with a pollen S-gene product(s) to recognize self and non-self pollen.     

RNase T1 variant RV cleaves single-stranded RNA after purines due to specific recognition by the Asn46 side chain amide

Attempts to alter the guanine specificity of ribonuclease T1 (RNase T1) by rational or random mutagenesis have failed so far. The RNase T1 variant RV (Lys41Glu, Tyr42Phe, Asn43Arg, Tyr45Trp, and Glu46Asn) designed by combination of a random and a rational mutagenesis approach, however, exhibits a stronger preference toward adenosine residues than wild-type RNase T1. Steady state kinetics of the cleavage reaction of the two dinucleoside phosphate substrates adenylyl-3',5'-cytidine and guanylyl-3',5'-cytidine revealed that the ApC/GpC ratio of the specificity coefficient (k(cat)/K(m)) was increased approximately 7250-fold compared to that of the wild-type. The crystal structure of the nucleotide-free RV variant has been refined in space group P6(1) to a crystallographic R-factor of 19.9% at 1.7 A resolution. The primary recognition site of the RV variant adopts a similar conformation as already known from crystal structures of RNase T1 not complexed to any nucleotide. Noteworthy is a high flexibility of Trp45 and Asn46 within the three individual molecules in the asymmetric unit. In addition to the kinetic studies, these data indicate the participation of Asn46 in the specific recognition of the base and therefore a specific binding of adenosine.     

On a salmon (Oncorhynchus [corrected] keta) liver RNase, belonging to RNase T2 family: primary structure and some properties

A base-nonspecific and acid ribonuclease (RNase Ok2) was purified from the liver of a salmon (Oncorhnchus keta) to a homogeneous state by SDS-PAGE. The primary structure of RNase Ok2 was determined by protein chemistry and molecular cloning. The RNase Ok2 was a glycoprotein and consisted of 216 amino acid residues. Its molecular mass of protein moiety was 25,198, and its amino acid sequence showed that it belongs to the RNase T2 family of enzymes. The optimal pH of RNase Ok2 was around 5.5. The base preferences at the B1 and B2 sites were estimated from the rates of hydrolysis of 16 dinucleoside phosphates to be G>A>U, C, and G>A>U>C respectively. In this enzyme, one of the three histidine residues which have been thought to be important for catalysis of RNase Rh, a typical RNase of this family of enzymes, His104 was replaced by tyrosine residue. Based on the results, the role of H104, which has been proposed to be a phosphate binding site with a substrate, was reconsidered, and we proposed a revised role of this His residue in the hydrolysis mechanism of RNase T2 family enzymes.     

The structures of RNase A complexed with 3'-CMP and d(CpA): active site conformation and conserved water molecules.

The interactions of RNase A with cytidine 3'-monophosphate (3'-CMP) and deoxycytidyl-3',5'-deoxyadenosine (d(CpA)) were analyzed by X-ray crystallography. The 3'-CMP complex and the native structure were determined from trigonal crystals, and the d(CpA) complex from monoclinic crystals. The differences between the overall structures are concentrated in loop regions and are relatively small. The protein-inhibitor contacts are interpreted in terms of the catalytic mechanism. The general base His 12 interacts with the 2' oxygen, as does the electrostatic catalyst Lys 41. The general acid His 119 has 2 conformations (A and B) in the native structure and is found in, respectively, the A and the B conformation in the d(CpA) and the 3'-CMP complex. From the present structures and from a comparison with RNase T1, we propose that His 119 is active in the A conformation. The structure of the d(CpA) complex permits a detailed analysis of the downstream binding site, which includes His 119 and Asn 71. The comparison of the present RNase A structures with an inhibitor complex of RNase T1 shows that there are important similarities in the active sites of these 2 enzymes, despite the absence of any sequence homology. The water molecules were analyzed in order to identify conserved water sites. Seventeen water sites were found to be conserved in RNase A structures from 5 different space groups. It is proposed that 7 of those water molecules play a role in the binding of the N-terminal helix to the rest of the protein and in the stabilization of the active site.     

Amino acid sequence and crystal structure of BaP1, a metalloproteinase from Bothrops asper snake venom that exerts multiple tissue-damaging activities

BaP1 is a 22.7-kD P-I-type zinc-dependent metalloproteinase isolated from the venom of the snake Bothrops asper, a medically relevant species in Central America. This enzyme exerts multiple tissue-damaging activities, including hemorrhage, myonecrosis, dermonecrosis, blistering, and edema. BaP1 is a single chain of 202 amino acids that shows highest sequence identity with metalloproteinases isolated from the venoms of snakes of the subfamily Crotalinae. It has six Cys residues involved in three disulfide bridges (Cys 117-Cys 197, Cys 159-Cys 181, Cys 157-Cys 164). It has the consensus sequence H(142)E(143)XXH(146)XXGXXH(152), as well as the sequence C(164)I(165)M(166), which characterize the "metzincin" superfamily of metalloproteinases. The active-site cleft separates a major subdomain (residues 1-152), comprising four alpha-helices and a five-stranded beta-sheet, from the minor subdomain, which is formed by a single alpha-helix and several loops. The catalytic zinc ion is coordinated by the N(epsilon 2) nitrogen atoms of His 142, His 146, and His 152, in addition to a solvent water molecule, which in turn is bound to Glu 143. Several conserved residues contribute to the formation of the hydrophobic pocket, and Met 166 serves as a hydrophobic base for the active-site groups. Sequence and structural comparisons of hemorrhagic and nonhemorrhagic P-I metalloproteinases from snake venoms revealed differences in several regions. In particular, the loop comprising residues 153 to 176 has marked structural differences between metalloproteinases with very different hemorrhagic activities. Because this region lies in close proximity to the active-site microenvironment, it may influence the interaction of these enzymes with physiologically relevant substrates in the extracellular matrix.     

Nonspecific base recognition mediated by water bridges and hydrophobic stacking in ribonuclease I from Escherichia coli

The crystal structure of Escherichia coli ribonuclease I (EcRNase I) reveals an RNase T2-type fold consisting of a conserved core of six beta-strands and three alpha-helices. The overall architecture of the catalytic residues is very similar to the plant and fungal RNase T2 family members, but the perimeter surrounding the active site is characterized by structural elements specific for E. coli. In the structure of EcRNase I in complex with a substrate-mimicking decadeoxynucleotide d(CGCGATCGCG), we observe a cytosine bound in the B2 base binding site and mixed binding of thymine and guanine in the B1 base binding site. The active site residues His55, His133, and Glu129 interact with the phosphodiester linkage only through a set of water molecules. Residues forming the B2 base recognition site are well conserved among bacterial homologs and may generate limited base specificity. On the other hand, the B1 binding cleft acquires true base aspecificity by combining hydrophobic van der Waals contacts at its sides with a water-mediated hydrogen-bonding network at the bottom. This B1 base recognition site is highly variable among bacterial sequences and the observed interactions are unique to EcRNaseI and a few close relatives.     

Three subunits contribute amino acids to the active site of tetrameric adenylosuccinate lyase: Lys268 and Glu275 are required

Tetrameric adenylosuccinate lyase (ASL) of Bacillus subtilis catalyzes the cleavage of adenylosuccinate to form AMP and fumarate. We previously reported that two distinct subunits contribute residues to each active site, including the His68 and His89 from one and His141 from a second subunit [Brosius, J. L., and Colman, R. F. (2000) Biochemistry 39, 13336-13343]. Glu(275) is 2.8 A from His141 in the ASL crystal structure, and Lys268 is also in the active site region; Glu275 and Lys268 come from a third, distinct subunit. Using site-directed mutagenesis, we have replaced Lys268 by Arg, Gln, Glu, and Ala, with specific activities of the purified mutant enzymes being 0.055, 0.00069, 0.00028, and 0.0, respectively, compared to 1.56 units/mg for wild-type (WT) enzyme. Glu275 was substituted by Gln, Asp, Ala, and Arg; none of these homogeneous mutant enzymes has detectable activity. Circular dichroism and light scattering reveal that neither the secondary structure nor the oligomeric state of the Lys268 mutant enzymes has been perturbed. Native gel electrophoresis and circular dichroism indicate that the Glu275 mutant enzymes are tetramers, but their conformation is altered slightly. For K268R, the K(m)s for all substrates are similar to WT enzyme. Binding studies using [2-3H]-adenylosuccinate reveal that none of the Glu275 mutant enzymes, nor inactive K268A, can bind substrate. We propose that Lys268 participates in binding substrate and that Glu275 is essential for catalysis because of its interaction with His141. Incubation of H89Q with K268Q or E275Q leads to restoration of up to 16% WT activity, while incubation of H141Q with K268Q or E275Q results in 6% WT activity. These complementation studies provide the first functional evidence that a third subunit contributes residues to each intersubunit active site of ASL. Thus, adenylosuccinate lyase has four active sites per enzyme tetramer, each of which is formed from regions of three subunits.     

A predominant role for hydrogen bonding in the stability of the homodimer of bothropstoxin-I, A lysine 49-phospholipase A2

Bothropstoxin-I (BthTx-I) is a homodimeric Lys49-phospholipase A(2) isolated from Bothrops jararacussu venom which damages liposome membranes via a Ca(2+)-independent mechanism. The Glu12/Trp77/Lys80 triad at the dimer interface forms extensive intermolecular hydrogen bonds and hydrophobic contacts, and equilibrium chemical denaturation was used to evaluate the effect on homodimer stability of site-directed mutagenesis of these residues. Changes in the intrinsic fluorescence anisotropy and farUV circular dichroism signals were analyzed using a two-step unfolding model of the BthTx-I dimer to estimate the Gibbs free energy changes of transitions between the dimer and native monomer and between the native and denatured monomers. Whereas the Trp77His, Trp77Gln and Glu12Gln mutants showed native-like dimer stabilities, the Trp77Phe, Lys80Met and Lys80Gly mutants showed significantly reduced K(d) values. A reduced dimer stability is correlated with a decrease in the Ca(2+)-independent membrane damaging activity as monitored by the release of a liposome entrapped fluorescent marker. Although the membrane damaging activity of the monomer is fivefold less than the dimer, the myotoxic activity was unaffected, indicating that these two effects are not correlated. These data suggest that the BthTx-I dimer is predominantly stabilized by hydrogen bonding interactions, and highlight the importance of the homodimeric form for efficient Ca(2+)-independent membrane damage.     

Reassessing the type I dehydroquinate dehydratase catalytic triad: Kinetic and structural studies of Glu86 mutants

Dehydroquinate dehydratase (DHQD) catalyzes the third reaction in the biosynthetic shikimate pathway. Type I DHQDs are members of the greater aldolase superfamily, a group of enzymes that contain an active site lysine that forms a Schiff base intermediate. Three residues (Glu86, His143, and Lys170 in the Salmonella enterica DHQD) have previously been proposed to form a triad vital for catalysis. While the roles of Lys170 and His143 are well defined—Lys170 forms the Schiff base with the substrate and His143 shuttles protons in multiple steps in the reaction—the role of Glu86 remains poorly characterized. To probe Glu86′s role, Glu86 mutants were generated and subjected to biochemical and structural study. The studies presented here demonstrate that mutant enzymes retain catalytic proficiency, calling into question the previously attributed role of Glu86 in catalysis and suggesting that His143 and Lys170 function as a catalytic dyad. Structures of the Glu86Ala (E86A) mutant in complex with covalently bound reaction intermediate reveal a conformational change of the His143 side chain. This indicates a predominant steric role for Glu86, to maintain the His143 side chain in position consistent with catalysis. The structures also explain why the E86A mutant is optimally active at more acidic conditions than the wild‐type enzyme. In addition, a complex with the reaction product reveals a novel, likely nonproductive, binding mode that suggests a mechanism of competitive product inhibition and a potential strategy for the design of therapeutics.     

Computer Modelling Studies on the Mechanism of Action of Ribonuclease T1

Abstract

The mechanism of action of ribonuclease (RNase) T₁ is still a matter of considerable debate as the results of x-ray, 2-D nmr and site-directed mutagenesis studies disagree regarding the role of the catalytically important residues. Hence computer modelling studies were carried out by energy minimisation of the complexes of RNase T₁ and some of its mutants (His40Ala, His40Lys, and Glu58Ala) with the substrate guanyl cytosine (GpC), and of native RNase T₁ with the reaction intermediate guanosine 2′, 3′-cyclic phosphate (G>p). The puckering of the guanosine ribose moiety in the minimum energy conformer of the RNase T₁ - GpC (substrate) complex was found to be O4′-endo and not C3′-endo as in the RNase T₁ - 3′-guanylic acid (inhibitor/product) complex. A possible scheme for the mechanism of action of RNase T₁ has been proposed on the basis of the arrangement of the catalytically important amino acid residues His40, Glu58, Arg77, and His92 around the guanosine ribose and the phosphate moiety in the RNase T₁ - GpC and RNase T₁ - G>p complexes. In this scheme, Glu58 serves as the general base group and His92 as the general acid group in the transphosphorylation step. His40 may be essential for stabilising the negatively charged phosphate moiety in the enzyme-transition state complex.     

Isolation, characterization, and primary structure of a base non-specific and adenylic acid preferential ribonuclease with higher specific activity from Trichoderma viride.

In order to elucidate the structure-function relationship of RNases belonging to the RNase T2 family (base non-specific and adenylic acid-preferential RNase), an RNase of this family was purified from Trichoderma viride (RNase Trv) to give three closely adjacent bands with RNase activity on slab-gel electrophoresis in a yield of 20%. The three RNases gave single band with the same mobility on slab-gel electrophoresis after endoglycosidase F digestion. The enzymatic properties including base specificity of RNase Trv were very similar to those of typical T2-family RNases such as RNase T2 from Aspergillus oryzae and RNase M from A. saitoi. The specific activity of RNase Trv towards yeast RNA was about 13-fold higher than that of RNase M. The complete primary structure of RNase Trv was determined by analyses of the peptides generated by digestion of reduced and carboxymethylated RNase Trv with Staphylococcus aureus V8 protease, lysylendopeptidase and alpha-chymotrypsin. The molecular weight of the protein moiety deduced from the sequence was 25,883. The locations of 10 half-cystine residues were almost superimposable upon those of other RNases of this family. The homologies between RNase Trv and RNase T2, RNase M, and RNase Rh (Rhizopus niveus) were 124, 132, and 92 residues, respectively. The sequences around three histidine residues, His52, His109, and His114, were highly conserved in these 4 RNases.     

E. coli RNase HI and the phosphonate-DNA/RNA hybrid: molecular dynamics simulations

A model for the complex between E. coli RNase HI and the DNA/RNA hybrid (previously refined by molecular dynamics simulations) was used to determine the impact of the internucleotide linkage modifications (either 3-O-CH2-P-O-5' or 3-O-P-CH2-O-5) on the ability of the modified-DNA/RNA hybrid to create a complex with the protein. Modified internucleotide linkages were incorporated systematically at different positions close to the 3-end of the DNA strand to interfere with the DNA binding site of RNase H. Altogether, six trajectories were produced (length 1.5ns). Mutual hydrogen bonds connecting both strands of the nucleic acids hybrid, DNA with RNase H, RNA with RNase H, and the scissile bond with the Mg++. 4H2O chelate complex (bound in the active site) were analyzed in detaiL Many residues were involved in binding of the DNA (Arg88, Asn84, Trp85, Trp104, Tyr73, Lys99, Asn100, Thr43, and Asn 16) and RNA (Gln76, Gln72, Tyr73, Lys122, Glu48, Asn44, and Cys13) strand to the substrate-binding site of the RNase H enzyme. The most remarkable disturbance of the hydrogen bonding net was observed for structures with modified internucleotide linkages positioned in a way to interact with the Trp104, Tyr73, Lys99, and Asn100 residues (situated in the middle of the DNA binding site, where a cluster of Trp residues forms a rigid core of the protein structure).     

Neutron Diffraction Studies of a Class A β-Lactamase Toho-1 E166A/R274N/R276N Triple Mutant

β-Lactam antibiotics have been used effectively over several decades against many types of bacterial infectious diseases. However, the most common cause of resistance to the β-lactam antibiotics is the production of β-lactamase enzymes that inactivate β-lactams by rapidly hydrolyzing the amide group of the β-lactam ring. Specifically, the class A extended-spectrum β-lactamases (ESBLs) and inhibitor-resistant enzymes arose that were capable of hydrolyzing penicillins and the expanded-spectrum cephalosporins and monobactams in resistant bacteria, which lead to treatment problems in many clinical settings. A more complete understanding of the mechanism of catalysis of these ESBL enzymes will impact current antibiotic drug discovery efforts. Here, we describe the neutron structure of the class A, CTX-M-type ESBL Toho-1 E166A/R274N/R276N triple mutant in its apo form, which is the first reported neutron structure of a β-lactamase enzyme. This neutron structure clearly reveals the active-site protonation states and hydrogen-bonding network of the apo Toho-1 ESBL prior to substrate binding and subsequent acylation. The protonation states of the active-site residues Ser70, Lys73, Ser130, and Lys234 in this neutron structure are consistent with the prediction of a proton transfer pathway from Lys73 to Ser130 that is likely dependent on the conformation of Lys73, which has been hypothesized to be coupled to the protonation state of Glu166 during the acylation reaction. Thus, this neutron structure is in agreement with a proposed mechanism for acylation that identifies Glu166 as the general base for catalysis.     

Identification of single Mn(2+) binding sites required for activation of the mutant proteins of E.coli RNase HI at Glu48 and/or Asp134 by X-ray crystallography

Escherichia coli RNase HI has two Mn(2+)-binding sites. Site 1 is formed by Asp10, Glu48, and Asp70, and site 2 is formed by Asp10 and Asp134. Site 1 and site 2 have been proposed to be an activation site and an attenuation site, respectively. However, Glu48 and Asp134 are dispensable for Mn(2+)-dependent activity. In order to identify the Mn(2+)-binding sites of the mutant proteins at Glu48 and/or Asp134, the crystal structures of the mutant proteins E48A-RNase HI*, D134A-RNase HI*, and E48A/D134N-RNase HI* in complex with Mn(2+) were determined. In E48A-RNase HI*, Glu48 and Lys87 are replaced by Ala. In D134A-RNase HI*, Asp134 and Lys87 are replaced by Ala. In E48A/D134N-RNase HI*, Glu48 and Lys87 are replaced by Ala and Asp134 is replaced by Asn. All crystals had two or four protein molecules per asymmetric unit and at least two of which had detectable manganese ions. These structures indicated that only one manganese ion binds to the various positions around the center of the active-site pocket. These positions are different from one another, but none of them is similar to site 1. The temperature factors of these manganese ions were considerably larger than those of the surrounding residues. These results suggest that the first manganese ion required for activation of the wild-type protein fluctuates among various positions around the center of the active-site pockets. We propose that this fluctuation is responsible for efficient hydrolysis of the substrates by the protein (metal fluctuation model). The binding position of the first manganese ion is probably forced to shift to site 1 or site 2 upon binding of the second manganese ion.     

Computer modelling studies of ribonuclease T1-2'-deoxy-2'-fluoroguanylyl- (3',5')-cytidine complex.

The mode of binding of the substrate analog 2'-deoxy-2'-fluoroguanylyl- (3',5')-cytidine (GfpC) to RNase T1 was determined by computer modelling studies. The results obtained are in good agreement with the observations of 1H-nmr studies. The modes of binding of the substrate analog GfpC and the substrate GpC to the enzyme RNase T1 have been compared. Though the guanine base favours to occupy the same site of the enzyme in both the complexes, significant differences are observed in the local environment around the 2'-substituent group of guanosine ribose moiety. In the RNase T1-GpC complex, the 2'-OH group is in close proximity to the side chain carboxylic acid of Glu58 which leads to the formation of a hydrogen bond. However, in the RNase T1-GfpC complex, 2'-fluorine is positioned away from Glu58 due to electrostatic repulsion and instead forms a hydrogen bond with His40 imidazolium group. The results obtained rule out the possibility of His40 serving as the base group in catalysis as suggested by 1H-nmr studies and further support the primary role assigned to Glu58 as the general base group by earlier computer modelling and the recent site directed mutagenesis studies. This study also implies that the 2'-deoxy-2'-fluoro substrate analog may not serve as a good model for determining the amino acid residue which serves as the general base group in ribonuclease catalysed reactions.     

Contribution of active site residues to the activity and thermal stability of ribonuclease Sa

We have used site-specific mutagenesis to study the contribution of Glu 74 and the active site residues Gln 38, Glu 41, Glu 54, Arg 65, and His 85 to the catalytic activity and thermal stability of ribonuclease Sa. The activity of Gln38Ala is lowered by one order of magnitude, which confirms the involvement of this residue in substrate binding. In contrast, Glu41Lys had no effect on the ribonuclease Sa activity. This is surprising, because the hydrogen bond between the guanosine N1 atom and the side chain of Glu 41 is thought to be important for the guanine specificity in related ribonucleases. The activities of Glu54Gln and Arg65Ala are both lowered about 1000-fold, and His85Gln is totally inactive, confirming the importance of these residues to the catalytic function of ribonuclease Sa. In Glu74Lys, k(cat) is reduced sixfold despite the fact that Glu 74 is over 15 A from the active site. The pH dependence of k(cat)/K(M) is very similar for Glu74Lys and wild-type RNase Sa, suggesting that this is not due to a change in the pK values of the groups involved in catalysis. Compared to wild-type RNase Sa, the stabilities of Gln38Ala and Glu74Lys are increased, the stabilities of Glu41Lys, Glu54Gln, and Arg65Ala are decreased and the stability of His85Gln is unchanged. Thus, the active site residues in the ribonuclease Sa make different contributions to the stability.     

E. COLI RNASE HI AND THE PHOSPHONATE-DNA/RNA HYBRID: MOLECULAR DYNAMICS SIMULATIONS

A model for the complex between E. coli RNase HI and the DNA/RNA hybrid (previously refined by molecular dynamics simulations) was used to determine the impact of the internucleotide linkage modifications (either 3′–O–CH₂–P–O–5′ or 3′–O–P–CH₂–O–5′) on the ability of the modified-DNA/RNA hybrid to create a complex with the protein. Modified internucleotide linkages were incorporated systematically at different positions close to the 3′-end of the DNA strand to interfere with the DNA binding site of RNase H. Altogether, six trajectories were produced (length 1.5). Mutual hydrogen bonds connecting both strands of the nucleic acids hybrid, DNA with RNase H, RNA with RNase H, and the scissile bond with the Mg⁺⁺ · 4H₂O chelate complex (bound in the active site) were analyzed in detail. Many residues were involved in binding of the DNA (Arg88, Asn84, Trp85, Trp104, Tyr73, Lys99, Asn100, Thr43, and Asn16) and RNA (Gln76, Gln72, Tyr73, Lys122, Glu48, Asn44, and Cys13) strand to the substrate-binding site of the RNase H enzyme. The most remarkable disturbance of the hydrogen bonding net was observed for structures with modified internucleotide linkages positioned in a way to interact with the Trp104, Tyr73, Lys99, and Asn100 residues (situated in the middle of the DNA binding site, where a cluster of Trp residues forms a rigid core of the protein structure).