Electrostatic adsorption of heme proteins alternated with polyamidoamine dendrimers for layer-by-layer assembly of electroactive films

A novel thin film of heme proteins, including hemoglobin (Hb), myoglobin (Mb), and catalase (Cat), was successfully assembled layer by layer with polyamidoamine (PAMAM) dendrimers on different solid surfaces. At pH 7.0, protonated PAMAM possesses positive surface charges, whereas the proteins have net negative surface charges at pH above their isoelectric points. Thus, layer-by-layer {PAMAM/protein}(n)() films were assembled with alternate adsorption of oppositely charged PAMAM and proteins from their aqueous solutions mainly by electrostatic interaction. The assembly process was monitored by quartz crystal microbalance (QCM), UV-vis spectroscopy, and cyclic voltammetry (CV). The growth of the protein multilayer films was regular and linear, whereas the electroactivity of the films was only extended to a few bilayers. CVs of {PAMAM/protein}(n)() films showed a pair of well-defined and nearly reversible peaks characteristic of the protein heme Fe(III)/Fe(II) redox couples. Although {PAMAM/Hb}(n)() and {PAMAM/Mb}(n)() films showed very similar properties, {PAMAM/Cat}(n)() films displayed different and unique characters. The substrates with biological or environmental significance, such as oxygen, hydrogen peroxide, trichloroacetic acid, and nitrite, were catalytically reduced at {PAMAM/protein}(n)() film electrodes, showing the potential applicability of the films as new types of biosensors or bioreactors based on direct electrochemistry of the proteins. Both the electrochemical and electrocatalytic activity of {PAMAM/protein}(n)() films can be tailored precisely by controlling the number of bilayers or the film thickness.     

Self-assembly of electroactive layer-by-layer films of heme proteins with anionic surfactant dihexadecyl phosphate

Anionic surfactant dihexadecyl phosphate (DHP) with two hydrocarbon chains can be self-assembled into a double-layer structure with tail-to-tail configuration and negatively charged head groups toward outside in its aqueous dispersion. Due to this unique biomembrane-like structure, the "charge reversal" in DHP adsorption on solid surface was realized, and the DHP was successfully assembled with positively charged myoglobin (Mb) or hemoglobin (Hb) into {DHP/protein}(n) layer-by-layer films. Quartz crystal microbalance (QCM), UV-vis spectroscopy, and cyclic voltammetry (CV) were used to monitor or confirm the film assembly process. The {DHP/protein}(n) films grown on pyrolytic graphite (PG) electrodes showed a pair of well-defined and nearly reversible CV peaks at about -0.35 V vs SCE in pH 7.0 buffers, characteristic of the protein heme Fe(III)/Fe(II) redox couples. Based on the direct electrochemistry of heme proteins, the {DHP/protein}(n) films could also be used to electrochemically catalyze reduction of oxygen, hydrogen peroxide and nitrite with significant lowering of reduction overpotentials. Scanning electron microscopy (SEM), UV-vis spectroscopy, and reflectance absorption infrared (RAIR) spectroscopy were employed to characterize the {DHP/protein}(n) films, suggesting that the proteins in the films retain their near-native structure.     

Interaction of myoglobin with poly(methacrylic acid) at different pH in their layer-by-layer assembly films: an electrochemical study

Myoglobin (Mb), with net positive surface charges at pH 5.0, was successfully assembled into layer-by-layer films on various solid surfaces with poly(methacrylic acid) (PMAA) at different pH, designated as {PMAA(pH 5.0)/Mb}n, {PMAA(pH 6.5)/Mb}n, and {PMAA(pH 8.0)/Mb}n, respectively. As a weak polycarboxylic acid with pKa=6 - 7, PMAA carried different negative charges at different pH due to different ionization degree of its carboxylic acid groups. Quartz crystal microbalance (QCM), UV-vis spectroscopy, and cyclic voltammetry (CV) were used to monitor and confirm the assembly of {PMAA/Mb}n films. All the results showed that the adsorption amount of Mb in each bilayer had an "unexpected" sequence of {PMAA(pH 5.0)/Mb}n>{PMAA(pH 6.5)/Mb}n>{PMAA(pH 8.0)/Mb}n, which could be explained by the formation of soluble complex of PMAA-Mb at pH 8.0 and the cooperative effect of hydrogen bonding and induced electrostatic interaction between Mb and PMAA at pH 5.0. The influence of ionic strength in exposure solution and in Mb adsorbate solution was investigated, and the results supported the above explanations. The {PMAA/Mb}n films provided a suitable microenvironment for Mb to retain its near-native structure and transfer electron with underlying electrodes. The reversible CV peak pair for Mb Fe(III)/Fe(II) redox couple could be used to catalyze reduction of hydrogen peroxide electrochemically, showing the potential applicability of the films as the new type of biosensors or bioreactors based on the direct electrochemistry of Mb. The electrochemical and electrocatalytic behaviors of protein layer-by-layer films with weak polyelectrolytes could thus be controlled by adjusting the solution pH of weak polyelectrolytes.     

Assembly of electroactive layer-by-layer films of hemoglobin and polycationic poly(diallyldimethylammonium)

Layer-by-layer (PDDA/Hb)(n) films were assembled by alternate adsorption of positively charged poly(diallyldimethylammonium) (PDDA) and negatively charged hemoglobin (Hb) at pH 9.2 from their aqueous solutions on pyrolytic graphite electrodes and other substrates. The assembly process was monitored and confirmed by quartz crystal microbalance (QCM), UV-vis spectroscopy, and cyclic voltammetry (CV). CVs of (PDDA/Hb)(n) films showed a pair of well-defined, nearly reversible peaks at about -0.34 V vs SCE at pH 7.0, characteristic of Hb heme Fe(III)/Fe(II) redox couple. Positions of Soret absorption band and infrared amide II band of Hb in (PDDA/Hb)(8) films suggest that Hb in the films keeps its secondary structure similar to its native state. The electrochemical parameters of (PDDA/Hb)(8) films were estimated by square wave voltammetry, and the thickness of the PDDA/Hb bilayer was estimated by QCM and scanning electron microscopy. Trichloroacetic acid and nitrite (NO(2)(-)) were catalytically reduced at (PDDA/Hb)(8) film electrodes. The electrochemical catalytic reactions of O(2) and H(2)O(2) on (PDDA/Hb)(8) films were also studied.     

Direct electron transfer between hemoglobin and pyrolytic graphite electrodes enhanced by Fe(3)O(4) nanoparticles in their layer-by-layer self-assembly films

Alternate adsorption of negatively charged Fe(3)O(4) nanoparticles from their pH 8.0 aqueous dispersions and positively charged hemoglobin (Hb) from its pH 5.5 buffers on solid substrates resulted in the assembly of {Fe(3)O(4)/Hb}(n) layer-by-layer films. Quartz crystal microbalance (QCM), UV-vis spectroscopy, and cyclic voltammetry (CV) were used to monitor and confirm the film growth. A pair of well-defined, nearly reversible CV peaks for HbFe(III)/Fe(II) redox couples was observed for {Fe(3)O(4)/Hb}(n) films on pyrolytic graphite (PG) electrodes. Although the multilayered films grew linearly with the number of Fe(3)O(4)/Hb bilayers (n) and the amount of Hb adsorbed in each bilayer was generally the same, the electroactive Hb could only extend to 6 bilayers. This indicates that only those Hb molecules in the first few bilayers closest to the electrode surface are electroactive. The electrochemical parameters such as the apparent heterogeneous electron transfer rate constant (k(s)) were estimated by square wave voltammetry (SWV) and nonlinear regression. The Soret absorption band position of Hb in {Fe(3)O(4)/Hb}(6) films showed that Hb in the films retained its near native structure in the medium pH range. The {Fe(3)O(4)/Hb}(6) film electrodes also showed good biocatalytic activity toward reduction of oxygen, hydrogen peroxide, trichloroacetic acid, and nitrite. The electrochemical reduction overpotentials of these substrates were lowered significantly by {Fe(3)O(4)/Hb}(n) films.     

Assembly of myoglobin layer-by-layer films with poly(propyleneimine) dendrimer-stabilized gold nanoparticles and its application in electrochemical biosensing

The small-sized Au nanoparticles (3 nm) were prepared by reduction of HAuCl(4) in the presence of poly(propyleneimine) (PPI) dendrimers, forming the stable PPI-Au nanoclusters in aqueous medium. The PPI-Au nanoclusters might take a kind of "core-shell" structure, in which several PPI molecules were attached on the surface of one gold nanoparticle. The PPI-Au nanoclusters in aqueous dispersions and myoglobin (Mb) in its buffers at pH 5.0 were then alternately adsorbed on the surface of pyrolytic graphite (PG) electrodes and other solid substrates, forming {PPI-Au/Mb}(n) layer-by-layer films, which was confirmed by cyclic voltammetry (CV) and quartz crystal microbalance (QCM). {PPI-Au/Mb}(n) films on PG electrodes demonstrated a pair of well-defined and quasi-reversible CV reduction-oxidation peaks for Mb heme Fe(III)/Fe(II) couple and good electrocatalytic properties toward reduction of oxygen and hydrogen peroxide. Compared with {Au/Mb}(n) multilayer films containing no dendrimers and {PAMAM/Mb}(n) films assembled by polyamidoamine (PAMAM) dendrimers and Mb but in the absence of Au nanoparticles, {PPI-Au/Mb}(n) films showed better electrochemical behaviors and catalytic performances, which may be attributed to the unique structure of PPI-Au nanoclusters and good conductivity of gold nanoparticles. This novel kind of protein multilayer films assembled with dendrimer-stabilized gold nanoparticles may provide a new and general approach to fabricate the biosensors and bioreactors based on the direct electrochemistry of proteins or enzymes.     

Direct electron transfer and electrocatalysis of hemoglobin adsorbed on mesoporous carbon through layer-by-layer assembly

Using chitosan as an effective linker between CMK-3 and glassy carbon electrode surface, {Hb/CMK-3}n multilayer film-modified electrodes were constructed through layer-by-layer assembly. The morphology of thus-formed {Hb/CMK-3}n film was characterized by scanning electron micrographs, and the interaction of hemoglobin (Hb) with CMK-3 was studied by UV-vis spectroscopy and electrochemical methods. Under optimal conditions, {Hb/CMK-3}6 film showed a couple of stable and well-defined redox peaks at about -377 and -296 mV in pH 7.0 buffers. Furthermore, the {Hb/CMK-3}6 film displayed excellent electrocatalysis to the reduction of both H2O2 and O2. Based on thus-formed film and its direct electron transfer behavior, a novel biosensor was presented for the determination of H2O2 ranging from 1.2 to 57 muM with the detection limit of 0.6microM at S/N=3. CMK-3 provided a desirable matrix for protein immobilization and biosensor preparation.     

Voltammetric studies of hemoglobin-coated polystyrene latex bead films on pyrolytic graphite electrodes

A novel hemoglobin (Hb)-coated polystyrene (PS) latex bead film was deposited on pyrolytic graphite (PG) electrode surface. In the first step, positively charged Hb molecules in pH 5.0 buffers were adsorbed on the surface of negatively charged, 500 nm diameter PS latex beads bearing sulfate groups by electrostatic interaction. The aqueous dispersion of Hb-coated PS particles was then deposited on the surface of PG electrodes and, after evaporation of the solvent, Hb-PS films were formed. The Hb-PS film electrodes exhibited a pair of well-defined, quasi-reversible cyclic voltammetric (CV) peaks at about −0.36 V vs. SCE in pH 7.0 buffers, characteristic of Hb heme Fe(III)/Fe(II) redox couples. Positions of Soret absorption band of Hb-PS films suggest that Hb retains its near-native structure in the films in its dry form and in solution at medium pH. The Hb in PS films was also acted as a catalyst to catalyze electrochemical reduction of various substrates such as trichloroacetic acid (TCA), nitrite, oxygen and hydrogen peroxide.     

Amperometric third-generation hydrogen peroxide biosensor based on the immobilization of hemoglobin on multiwall carbon nanotubes and gold colloidal nanoparticles

A convenient and effective strategy for preparation nanohybrid film of multi-wall carbon nanotubes (MWNT) and gold colloidal nanoparticles (GNPs) by using proteins as linker is proposed. In such a strategy, hemoglobin (Hb) was selected as model protein to fabricate third-generation H2O2 biosensor based on MWNT and GNPs. Acid-pretreated, negatively charged MWNT was first modified on the surface of glassy carbon (GC) electrode, then, positively charged Hb was adsorbed onto MWNT films by electrostatic interaction. The {Hb/GNPs}n multilayer films were finally assembled onto Hb/MWNT film through layer-by-layer assembly technique. The assembly of Hb and GNPs was characterized with cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and transmission electron microscopy (TEM). The direct electron transfer of Hb is observed on Hb/GNPs/Hb/MWNT/GC electrode, which exhibits excellent electrocatalytic activity for the reduction of H2O2 to construct a third-generation mediator-free H2O2 biosensor. As compared to those H2O2 biosensors only based on carbon nanotubes, the proposed biosensor modified with MWNT and GNPs displays a broader linear range and a lower detection limit for H2O2 determination. The linear range is from 2.1x10(-7) to 3.0x10(-3) M with a detection limit of 8.0x10(-8) M at 3sigma. The Michaelies-Menten constant KMapp value is estimated to be 0.26 mM. Moreover, this biosensor displays rapid response to H2O2 and possesses good stability and reproducibility.     

An electrochemical investigation of hemoglobin and catalase incorporated in collagen films

Collagen, an electrochemically inert protein, formed films on pyrolytic graphite (PG) electrodes, which provided a suitable microenvironment for heme proteins to transfer electron directly with the underlying electrodes. Hemoglobin (Hb) and catalase (Cat) incorporated in collagen films exhibited a pair of well-defined and quasi-reversible cyclic voltammetric peaks at around -0.35 V and -0.47 V (vs. SCE) in pH 7.0 buffers, respectively, characteristic of the protein heme Fe(III)/Fe(II) redox couples. UV-vis spectra showed that the heme proteins in collagen films retained their near-native conformations in the medium pH range. The results of scanning electron microscopy (SEM) demonstrated that the interaction between heme proteins and collagen made the morphology of dry protein-collagen films different from the collagen films alone. The electrochemical parameters such as apparent heterogeneous electron transfer rate constant (k(s)) and formal potential (E degrees ') of the films were estimated by using square wave voltammograms (SWV) and nonlinear regression analysis. The heme protein-collagen film electrodes were also used to catalyze the reduction of nitrite, oxygen and hydrogen peroxide, indicating potential applications of the films for the fabrication of a new type of biosensor that does not use mediators.     

Core--shell nanocluster films of hemoglobin and clay nanoparticle: direct electrochemistry and electrocatalysis

A novel core-shell protein nanocluster film, designated as clay-(Hb/PSS)(n), was fabricated on pyrolytic graphite (PG) electrodes. Positively charged hemoglobin (Hb) at pH 5.5 and negatively charged poly(styrenesulfonate) (PSS) were first assembled layer by layer on surface of clay nanoparticles from their solutions mainly by electrostatic attraction, forming a core-shell nanocluster structure in which clay nanoparticles were the "cores" and (Hb/PSS)(n) multilayers were the "shells". The aqueous dispersion of clay-(Hb/PSS)(n) nanoclusters was then cast on surface of PG electrodes, forming clay-(Hb/PSS)(n) nanocluster films after evaporation of solvent. Hb in clay-(Hb/PSS)(n) films exhibited a pair of well-defined and reversible cyclic voltammetric (CV) peaks at about -0.36 V vs. SCE in pH 7.0 buffers, characteristic of Hb heme Fe(III)/Fe(II) redox couples. Compared with other Hb-containing clay films, clay-(Hb/PSS)(n) films displayed smaller CV peak separation (DeltaE(p)), indicating the better electrochemical reversibility of Hb in these nanocluster films. The partially ordered structure of the films was characterized by X-ray diffraction (XRD) experiments. UV-VIS and reflection absorption infrared (RAIR) spectroscopy suggests that Hb retains its near-native structure in clay-(Hb/PSS)(n) films. Oxygen, hydrogen peroxide, and nitrite were catalytically reduced at clay-(Hb/PSS)(n) film electrodes, showing the potential applicability of the films as the new type of biosensors or bioreactors based on protein direct electrochemistry. The electrochemical and electrocatalytic activity of the films could be tailored by controlling the number of bilayers of the (Hb/PSS)(n) shells on the surface of clay nanoparticle cores.     

Loading/release behavior of (chitosan/DNA)n layer-by-layer films toward negatively charged anthraquinone and its application in electrochemical detection of natural DNA damage

In the present work, positively charged chitosan (CS) and negatively charged DNA were alternately adsorbed on the surface of pyrolytic graphite (PG) electrodes, forming (CS/DNA)(n) layer-by-layer films. Cyclic voltammetry (CV) results showed that negatively charged electroactive probe, 9,10-anthraquinone-2,6-disulfonate (AQDS), could be loaded into the (CS/DNA)(n) films from its solution (1 mM at pH 7.0, containing 0.1 M NaCl), designated as (CS/DNA)(n)-AQDS, and then released from the films in blank buffers. The loading/release behavior of (CS/DNA)(n) films toward AQDS was found to be obviously different between double-stranded (dsDNA) and single-stranded DNA (ssDNA). The release rate of AQDS from (CS/dsDNA)(n) films was much slower than that from the ssDNA counterparts mainly because AQDS could be intercalated into the double helix structure of dsDNA despite the repulsion between likely charged AQDS and DNA. The loading/release behavior of (CS/DNA)(n) films toward AQDS in recognition of dsDNA and ssDNA was then successfully applied to electrochemically detect the damage of natural DNA caused by Fenton reaction. To further understand the essence of the interactions involved in the AQDS loading/release process for (CS/DNA)(n) films, comparison experiments were performed, in which either positively charged intercalator brilliant cresyl blue (BCB) was used to replace AQDS as the redox probe, or poly(diallyldimethylammonium) (PDDA) with relatively high positive charge density was used to replace CS as the constituent of layer-by-layer films with DNA. The loading/release behavior of DNA films toward electroactive intercalator may open new possibilities for dsDNA/ssDNA recognition and of DNA damage detection by electrochemistry.     

Heme protein films with polyamidoamine dendrimer: direct electrochemistry and electrocatalysis

Biocompatible nanosized polyamidoamine (PAMAM) dendrimer films provided a suitable microenvironment for heme proteins to transfer electron directly with underlying pyrolytic graphite (PG) electrodes. Hemoglobin (Hb), myoglobin (Mb), horseradish peroxidase (HRP), and catalase (Cat) incorporated in PAMAM films exhibited a pair of well-defined, quasi-reversible cyclic voltammetric peaks, respectively, characteristic of the protein heme Fe(III)/Fe(II) redox couples. While Hb-, Mb-, and HRP-PAMAM films showed the cyclic voltammetry (CV) peaks at about -0.34 V vs. saturated calomel electrode (SCE) in pH 7.0 buffers, Cat-PAMAM films displayed the peak pair at a more negative potential of -0.47 V. The protein-PAMAM films demonstrated a surface-confined or thin-layer voltammetric behavior. The electrochemical parameters such as apparent heterogeneous electron transfer rate constants (k(s)) and formal potentials (E (degrees ')) were estimated by square wave voltammetry with nonlinear regression analysis. UV-vis and IR spectroscopy showed that the proteins retained their near-native secondary structures in PAMAM films. Oxygen, hydrogen peroxide, and nitrite were catalytically reduced at the protein-PAMAM film electrodes, showing the potential applicability of the films as the new type of biosensors or bioreactors based on direct electrochemistry of the proteins.     

Layer-by-layer fabrication and direct electrochemistry of glucose oxidase on single wall carbon nanotubes

Layer-by-layer assembly of glucose oxidase (GOx) with single-wall carbon nanotubes (SWCNTs) is achieved on the electrode surface based on the electrostatic attraction between positively charged GOx in pH 3.8 buffer and negatively charged carboxylic groups of CNTs. The cyclic voltammetry and electrochemical impedance spectroscopy are used to characterize the formation of multilayer films. In deaerated buffer solutions, the cyclic voltammetry of the multilayer films of {GOx/CNT}_n shows two pairs of well-behaved redox peaks that are assigned to the redox reactions of CNTs and GOx, respectively, confirming the effective immobilization of GOx on CNTs using the layer-by-layer technique. The redox peak currents of GOx increase linearly with the increased number of layers indicating the uniform growth of GOx in multilayer films. The dependence of the cyclic voltammetric response of GOx in multilayer films on the scan rate and pH is also studied. A linear decrease of the reduction current of oxygen at the {GOx/CNT}-modified electrodes with the addition of glucose suggests that such multilayer films of GOx retain the bioactivity and can be used as reagentless glucose biosensors.     

Heme protein films with polyamidoamine dendrimer: direct electrochemistry and electrocatalysis

Biocompatible nanosized polyamidoamine (PAMAM) dendrimer films provided a suitable microenvironment for heme proteins to transfer electron directly with underlying pyrolytic graphite (PG) electrodes. Hemoglobin (Hb), myoglobin (Mb), horseradish peroxidase (HRP), and catalase (Cat) incorporated in PAMAM films exhibited a pair of well-defined, quasi-reversible cyclic voltammetric peaks, respectively, characteristic of the protein heme Fe(III)/Fe(II) redox couples. While Hb-, Mb-, and HRP-PAMAM films showed the cyclic voltammetry (CV) peaks at about −0.34 V vs. saturated calomel electrode (SCE) in pH 7.0 buffers, Cat-PAMAM films displayed the peak pair at a more negative potential of −0.47 V. The protein-PAMAM films demonstrated a surface-confined or thin-layer voltammetric behavior. The electrochemical parameters such as apparent heterogeneous electron transfer rate constants (k_s) and formal potentials (E°′) were estimated by square wave voltammetry with nonlinear regression analysis. UV-vis and IR spectroscopy showed that the proteins retained their near-native secondary structures in PAMAM films. Oxygen, hydrogen peroxide, and nitrite were catalytically reduced at the protein-PAMAM film electrodes, showing the potential applicability of the films as the new type of biosensors or bioreactors based on direct electrochemistry of the proteins.     

Direct voltammetry and electrocatalytic properties of catalase incorporated in polyacrylamide hydrogel films

The direct voltammetry and electrocatalytic properties of catalase (Cat) in polyacrylamide (PAM) hydrogel films cast on pyrolytic graphite (PG) electrodes were investigated. Cat-PAM film electrodes showed a pair of well-defined and nearly reversible cyclic voltammetry peaks for Cat Fe(III)/Fe(II) redox couples at approximately -0.46 V vs. SCE in pH 7.0 buffers. The electron transfer between catalase and PG electrodes was greatly facilitated in the microenvironment of PAM films. The apparent heterogeneous electron transfer rate constant (k(s)) and formal potential (E degrees ') were estimated by fitting square wave voltammograms with non-linear regression analysis. The formal potential of Cat Fe(III)/Fe(II) couples in PAM films had a linear relationship with pH between pH 4.0 and 9.0 with a slope of -56 mV pH(-1), suggesting that one proton is coupled with single-electron transfer for each heme group of catalase in the electrode reaction. UV-Vis absorption spectroscopy demonstrated that catalase retained a near native conformation in PAM films at medium pH. The embedded catalase in PAM films showed the electrocatalytic activity toward dioxygen and hydrogen peroxide. Possible mechanism of catalytic reduction of H(2)O(2) at Cat-PAM film electrodes was proposed.     

Changes in the abnormal alpha-subunit upon CO-binding to the normal beta-subunit of Hb M Boston: resonance Raman,EPR and CD study

Heme-heme interaction in Hb M Boston (His alpha 58-->Tyr) was investigated with visible and UV resonance Raman (RR), EPR, and CD spectroscopies. Although Hb M Boston has been believed to be frozen in the T quaternary state, oxygen binding exhibited appreciable co-operativity (n=1.4) and the near-UV CD spectrum indicated weakening of the T marker at pH 9.0. Binding of CO to the normal beta-subunit gave no change in the EPR and visible Raman spectra of the abnormal alpha-subunit at pH 7.5, but it caused an increase of EPR rhombicity and significant changes in the Raman coordination markers as well as the Fe(III)-tyrosine related bands of the alpha-subunit at pH 9.0. The UVRR spectra indicated appreciable changes of Trp but not of Tyr upon CO binding to the alpha-subunit at pH 9.0. Therefore, we conclude that the ligand binding to the beta heme induces quaternary structure change at pH 9.0 and is communicated to the alpha heme, presumably through His beta 92-->Trp beta 37-->His alpha 87.     

Theoretical study of AlH(2+)n (n=1-7) dications

The structures and stability of 1–7 dications were calculated at the ab initio MP2/aug-cc-pVTZ level of theory. The dications AlH²⁺ 1 and 2 were characterized to be unstable thermodynamically. However, these and the stable dications, 3–7 have considerable kinetic barriers for deprotonation. Each of the structures 3–7 contains one or more two-electron three-center (2e–3c) bonds. Aluminum atoms of these dications carry most of the positive charges, as indicated by NBO charge calculations.Dedicated to Professor Dr. Paul von Ragué Schleyer on the occasion of his 75th birthday     

The role of charge in lipid selectivity for the nicotinic acetylcholine receptor.

The effect of salt and pH titration on the selectivity of spin-labeled analogues of phosphatidic acid, phosphatidylserine, phosphatidylcholine, and stearic acid for the nicotinic acetylcholine receptor (nAcChoR) reconstituted into dioleoylphosphatidylcholine was examined at 0 degrees C using electron spin resonance spectroscopy. The order of selectivity at pH 7.4 and 0 mM NaCl was phosphatidylserine > stearic acid > phosphatidic acid > phosphatidylcholine. The addition up to 2 M NaCl or titration of pH from 5.0 to > 9.0 did not alter the selectivity of the phospholipids for the nAcChoR. For stearic acid, conversely, titration of pH from 5.0 to 9.0 at 0 mM NaCl and titration of NaCl from 0 to 2 M at pH 9.0 both increased selectivity for the nAcChoR. It is concluded that electrostatic interactions do not account for the selectivity of the negatively charged phospholipids, phosphatidylserine, and phosphatidic acid for the nAcChoR. This is consistent with the known orientation of the transmembrane sequences M1 and M4, which predicts a balance in the number of negative and positive charges in the lipid-protein interface and suggests that the two positive charges on each M3 helix are not exposed to the lipid-protein interface.     

Characteristics in tyrosine coordinations of four hemoglobins M probed by resonance Raman spectroscopy

Resonance Raman spectra of four hemoglobins (Hbs) M with tyrosinate ligand, that is, Hb M Saskatoon (beta distal His----Tyr), Hb M Hyde Park (beta proximal His----Tyr), Hb M Boston (alpha distal His----Tyr), and Hb M Iwate (alpha proximal His----Tyr), were investigated in order to elucidate structural origins for distinctly facile reducibility of the abnormal subunit of Hb M Saskatoon in comparison with other Hbs M. All of the Hbs M exhibited the fingerprint bands for the Fe-tyrosinate proteins around 1600, 1500, and 1270 cm-1. However, Hb M Saskatoon had the lowest Fe-tyrosinate stretching frequency and was the only one to display the Raman spectral pattern of a six-coordinate heme for the abnormal beta subunit; the others displayed the patterns of a five-coordinate heme. The absorption intensity of Hb M Saskatoon at 600 nm indicated a transition with a midpoint pH at 5.2, whereas that of Hb M Boston was independent of pH from 7.2 to 4.8. The fingerprint bands for the tyrosinate coordination as well as the Fe-tyrosinate stretching band disappeared for Hb M Saskatoon at pH 5.0, and the resultant Raman spectrum resembled that of metHb A, while those bands were clearly observed for Hb M Boston at pH 5.0 and for two Hbs M at pH 10.0. These observations suggest that the unusual characteristics of the heme in the abnormal beta chain of Hb M Saskatoon result from the weak Fe-tyrosinate bond, which allows weak coordination of the proximal histidine, giving rise to the six-coordinate high-spin state at pH 7.(ABSTRACT TRUNCATED AT 250 WORDS)