Causes and consequences of individual variation in the extent of post‐juvenile moult in the blue tit Cyanistes caeruleus (Passeriformes: Paridae)

Moult, comprising the growth or replacement of feathers in birds, is an energetically demanding process. As a result, in many species, the extent of the post‐juvenile moult can vary substantially. However, the reasons underlying this variation remain poorly understood, and the potential life‐history consequences of variation in moult extent are even less clear. In the present study, we aimed to use individual‐specific data to identify factors affecting the extent of the post‐juvenile moult in a population of over 2500 blue tits Cyanistes caeruleus Linnaeus 1758, and to assess the consequences of individual variation in moult extent on reproduction in the first year of life. There was a substantial sex difference in post‐juvenile moult extent, with males moulting more extensively than females. Putative immigrant birds had moulted on average less than those born locally. However, there was little evidence of carry‐over effects of the natal environment on moult extent because we found no relationship between moult extent and fledging date or nestling mass. Evidence that moult extent, and hence feather brightness, affected subsequent reproductive success was limited. Moult extent had no effect on recruitment in males, although female recruits had moulted significantly less than nonbreeders. Because it was not influenced by features of the natal environment, moult extent may not be an honest signal of individual quality in C. caeruleus. As a result, the potential consequences of variation in moult extent for fitness are likely to be small.     

The effects of long‐distance migration on the evolution of moult strategies in Western‐Palearctic passerines

Although feathers are the unifying characteristic of all birds, our understanding of the causes, mechanisms, patterns and consequences of the feather moult process lags behind that of other major avian life‐history phenomena such as reproduction and long‐distance migration. Migration, which evolved in many species of the temperate and arctic zones, requires high energy expenditure to endure long‐distance journeys. About a third of Western‐Palearctic passerines perform long‐distance migrations of thousands of kilometres each year using various morphological, physiological, biomechanical, behavioural and life‐history adaptations. The need to include the largely non‐overlapping breeding, long‐distance migration and feather moult processes within the annual cycle imposes a substantial constraint on the time over which the moult process can take place. Here, we review four feather‐moult‐related adaptations which, likely due to time constraints, evolved among long‐distance Western‐Palearctic migrants: (i) increased moult speed; (ii) increased overlap between moult and breeding or migration; (iii) decreased extent of plumage moult; and (iv) moult of part or all of the plumage during the over‐wintering period in the tropics rather than in the breeding areas. We suggest that long‐distance migration shaped the evolution of moult strategies and increased the diversity of these strategies among migratory passerines. In contrast to this variation, all resident passerines in the Western Palearctic moult immediately after breeding by renewing the entire plumage of adults and in some species also juveniles, while in other species juvenile moult is partial. We identify important gaps in our current understanding of the moult process that should be addressed in the future. Notably, previous studies suggested that the ancestral moult strategy is a post‐breeding summer moult in the Western Palearctic breeding areas and that moult during the winter evolved due to the scheduling of long‐distance migration immediately after breeding. We offer an alternative hypothesis based on the notion of southern ancestry, proposing that the ancestral moult strategy was a complete moult during the ‘northern winter’ in the Afro‐tropical region in these species, for both adults and juveniles. An important aspect of the observed variation in moult strategies relates to their control mechanisms and we suggest that there is insufficient knowledge regarding the physiological mechanisms that are involved, and whether they are genetically fixed or shaped by environmental factors. Finally, research effort is needed on how global climate changes may influence avian annual routines by altering the scheduling of major processes such as long‐distance migration and feather moult.     

Relationships among timing of moult,moult duration and feather mass in long‐distance migratory passerines

Moult is a costly but necessary process in avian life, which displays two main temporal patterns within the annual cycle of birds (summer and winter moult). Timing of moult can affect its duration and consequently the amount of material invested in feathers, which could have a considerable influence on feather structure and functionality. In this study, we used two complementary approaches to test whether moult duration and feather mass vary in relation to the timing of moult. Firstly, we conducted a comparative study between a sample of long‐distance migratory passerine species which differ in moult pattern. Secondly, we took advantage of the willow warbler's Phylloscopus trochilus biannual moult, for which it is well‐known that winter moult takes longer than summer moult, to assess between‐moult variation in feather mass. Our comparative analysis showed that summer moulting species performed significantly shorter moults than winter moulters. We also detected that feathers produced in winter were comparatively heavier than those produced in summer, both in between‐species comparison and between moults of the willow warbler. These results suggest the existence of a trade‐off between moult speed and feather mass mediated by timing of moult, which could contribute to explain the diversity of moult patterns in passerines.     

Moult of three Palaearctic migrants in their West African winter quarters

Some theories about moult strategies of Palaearctic passerine migrants assume that birds adapt timing of moult to environmental conditions such as rainfall on their African wintering grounds. Species wintering in the northern tropics should limit moult to the period shortly after their arrival at the end of the rainy season. Passerine migrants wintering in West Africa should also moult more rapidly compared to related species or conspecific populations that moult elsewhere. We investigated the moult of melodious warblers Hippolais polyglotta, willow warblers Phylloscopus trochilus and pied flycatchers Ficedula hypoleuca wintering in Comoé National Park, Ivory Coast, between October 1994 and April 1998. In contrast to previous studies we did not restrict our analyses to moult of flight feathers but also included moult of body feathers. The results differed partially from the general assumptions of previous authors. Melodious warblers moulted twice: a complete moult shortly after their arrival, and a moult of body feathers and in some cases some tertials and secondaries in spring. Willow warblers moulting flight feathers were found between December and March with the majority moulting in January and February. Primary moult was not faster compared to populations moulting in central Africa and South Africa. Body feather moult varied strongly among individuals with birds in heavy moult between December and April. Pied flycatchers moulted body feathers and tertials between January and April. Birds with growing feathers were found throughout the whole period including the entire dry season. Moult strategies are thus not readily related to a few environmental factors in general and our results show that factors other than mere resource availability during certain times on the wintering grounds are likely to govern the timing of moult.Communicated by F.Bairlein     

Moulting strategies of a long-distance migratory seabird, the Mediterranean Cory's Shearwater Calonectris diomedea diomedea

Seabird moult is poorly understood because most species undergo moult at sea during the non-breeding season. We scored moult of wings, tail and body feathers on 102 Mediterranean Cory's Shearwaters Calonectris diomedea diomedea accidentally caught by longliners throughout the year. Primary renewal was found to be simple and descendant from the most proximal (P1) to the most distal (P10) feather. Secondaries showed a more complex moulting pattern, with three different asynchronous foci: the first starting on the innermost secondaries (S21), the second on the middle secondaries (S5) and the latest on the outermost secondaries (S1). Rectrix moult started at a later stage and was simple and descendant from the most proximal feather (R1) expanding distally. Although a few body feathers can be moulted from prelaying to hatching, moult of ventral and dorsal feathers clearly intensified during chick rearing. Different moulting sequences and uncoupled phenology between primary and secondary renewal suggest that flight efficiency is a strong constraint factor in the evolution of moulting strategies. Moreover, moult of Cory's Shearwaters was synchronous between wings and largely asynchronous between tail halves, with no more than one rectrix moulted at once. This result is probably related to the differential sensitivity of wings and the tail on flight performance, ultimately derived from different aerodynamic functions. Finally, Cory's Shearwater females renewed feathers earlier and faster than males, which may be related to the lower chick attendance of females.     

Moult in Black-browed and Grey-headed Albatrosses Diomedea melanophris and D. chrysostoma

We recorded the age of individual wing and tail feathers of Black-browed and Grey-headed Albatrosses Diomedea melanophris and D. chrysostoma of known age and breeding status at Bird Island, South Georgia. Breeders and non-breeders of both species moult their rectrices annually. Non-breeders moult primaries biennially. In the first year of a cycle, the outer three and some inner primaries are moulted descendantly; in the next year the inner primaries are moulted ascendantly, starting from primary seven. There is a general progression to moulting equal numbers of primaries in each half of the cycle by the time breeding starts at about 10 years of age. Grey-headed Albatrosses usually moult fewer primaries than Black-browed Albatrosses, particularly as 3-year-olds, when they undertake substantial plumage change in body moult. Most secondaries in Black-browed Albatrosses have been replaced once by age 4 years. Breeding Black-browed Albatrosses continue the moult pattern established as immatures whether they fail or not, as do failed Grey-headed Albatrosses. Successful Grey-headed Albatrosses, which breed again 16 months later, moult their three innermost primaries after breeding in the remainder of the current year and, after a period when moult is interrupted, renew the remaining primaries the following year. Comparisons between species and between failed and successful birds within species indicate that moult rate is not closely linked to the length of the interval between breeding attempts. Interspecies differences are better explained by breeding latitude, with tropical albatrosses moulting twice as fast as sub-Antarctic species, possibly reflecting food availability outside the breeding season.     

Contrasting strategies for wing‐moult and pre‐migratory fuelling in western and eastern populations of Common Whitethroat Sylvia communis

Trade‐offs between moult and fuelling in migrant birds vary with migration distance and the environmental conditions they encounter. We compared wing moult and fuelling at the northern and southern ends of migration in two populations of adult Common Whitethroats Sylvia communis. The western population moults most remiges at the breeding grounds in Europe (e.g. Poland) and migrates 4000–5000 km to western Africa (e.g. Nigeria). The eastern population moults all remiges at the non‐breeding grounds and migrates 7000–10 000 km from western Asia (e.g. southwestern Siberia) to eastern and southern Africa. We tested the hypotheses that: (1) Whitethroats moult their wing feathers slowly in South Africa, where they face fewer time constraints than in Poland, and (2) fuelling is slower when it coincides with moulting (Poland, South Africa) than when it occurs alone (Siberia, Nigeria). We estimated moult timing of primaries, secondaries and tertials from moult records of Polish and South African Whitethroats ringed in 1987–2017 and determined fuelling patterns from the body mass of Whitethroats ringed in all four regions. The western population moulted wing feathers in Poland over 55 days (2 July–26 August) at a varying rate, up to 13 feathers simultaneously, but fuelled slowly until departure in August–mid‐September. In Nigeria, during the drier period of mid‐February–March they fuelled slowly, but the fuelling rate increased three‐fold in April–May after the rains before mid‐April–May departure. The eastern population did not moult in Siberia but fuelled three times faster before mid‐July–early August departure than did the western birds moulting in Poland. In South Africa, the Whitethroats moulted over 57 days (2 January–28 February) at a constant rate of up to nine feathers simultaneously and fuelled slowly from mid‐December until mid‐April–May departure. These results suggest the two populations use contrasting strategies to capitalize on food supplies before departure from breeding and non‐breeding grounds.     

Moult in the Loggerhead Shrike Lanius ludovicianus is influenced by sex,latitude and migration

We investigated moult strategies in Loggerhead Shrikes by examining first prebasic or preformative moult patterns and by assessing the general location where individual feathers were grown using stable hydrogen isotope (δ²H) analysis. We tested the relative importance of factors known to impact moult timing and pattern, including age, sex, body size, food availability and migration. Migratory Shrikes showed evidence of suspended moult, in which feathers are moulted on both the breeding and the non‐breeding grounds with a suspension of moult during migration. Extent of moult was best explained by sex, longitude, migratory behaviour and breeding‐ground latitude. Male Hatch Year (HY) Shrikes replaced more feathers on the breeding grounds prior to migration than did HY females and moulted more extensively on the breeding grounds than did females. Non‐migratory HY Shrikes underwent a more extensive preformative moult than migratory HY Shrikes. Individuals in more southerly migratory populations moulted more extensively on the breeding grounds than did those breeding further north. Our data also indicate that individuals in the northeastern populations moulted more extensively on the breeding grounds than did those in the north and southwest. Our study underlines the complex structure and variation in moult possible within species, revealing surprising levels of differentiation between sexes and age cohorts, linked to environmental factors on the breeding grounds. Our study highlights the utility of an intrinsic marker, specifically δ²H analysis, to test hypotheses regarding the evolutionary and ecological forces driving moult. Although the methodology has not commonly been applied to this area of research, our results indicate that it can provide unprecedented insight into inter‐ and intra‐specific adaptive response to constraints, whereby individuals maximize fitness.     

Resistance of flight feathers to mechanical fatigue covaries with moult strategy in two warbler species

Flight feather moult in small passerines is realized in several ways. Some species moult once after breeding or once on their wintering grounds; others even moult twice. The adaptive significance of this diversity is still largely unknown. We compared the resistance to mechanical fatigue of flight feathers from the chiffchaff Phylloscopus collybita, a migratory species moulting once on its breeding grounds, with feathers from the willow warbler Phylloscopus trochilus, a migratory species moulting in both its breeding and wintering grounds. We found that flight feathers of willow warblers, which have a shaft with a comparatively large diameter, become fatigued much faster than feathers of chiffchaffs under an artificial cyclic bending regime. We propose that willow warblers may strengthen their flight feathers by increasing the diameter of the shaft, which may lead to a more rapid accumulation of damage in willow warblers than in chiffchaffs.     

Social environment affects the life history tactic of a phoretic mite

Phoretic animals use their hosts for travelling to habitat patches suitable for reproduction. Some species, such as the mite Poecilochirus carabi, are phoretic as juveniles and cannot leave their habitat once they reach adulthood. Previous work has shown that mites exercise choice over the habitat in which they will mature and reproduce based on abiotic parameters, but it is hitherto unknown whether their social environment influences this choice. By manipulating the composition of their conspecific company we show that P. carabi perform the adult moult in the presence of prospective mating partners only. Furthermore, juvenile male mites do not moult in the presence of an adult competitor. Recently‐moulted males are severely disadvantaged in fighting, so such delayed moulting may allow juveniles to increase their chances of surviving and reproducing. Our results clearly demonstrate a strong influence of the social environment on a phoretic’s habitat choice and life history.     

THE MOULT OF THE BULLFINCH PYRRHULA PYRRHULA

The distribution of feather tracts and their sequence of moult in the Bullfinch is described. The adult post-nuptial moult, which is complete, lasted 10–12 weeks, and the post-juvenile moult, which is partial, 7–9 weeks. Adult moult began with the shedding of the first (innermost) primary and ended with the replacement of the last. Variations in the rate of moult in the flight feathers were mainly achieved, not by changes in the growth rates of individual feathers, but in the number of feathers growing concurrently. The primaries were shed more slowly, and the onset of body moult delayed, in birds which were still feeding late young. In 1962, the onset of moult in the adults was spread over 11 weeks from thc end of July to the beginning of October, and in the two following years over the six weeks, from the end of July to the beginning of September. The onset of moult was delayed by late breeding, which itself occurred in response to a comparative abundance of food in late summer, markedly in 1962. In all years, the first juveniles to moult started at the end of July, and the last, three weeks after the latest adults. Juveniles moulting late in the season retained more juvenile feathers than those moulting earlier. During moult, adult and juvenile Bullfinches produce feathers equivalent to 40% and 33% respectively of their dry weights. In both, for much of the moult, an average of nearly 40 mgm. of feather material—some 0.6% of their dry-weight–is laid down each day. The remiges of the adult comprise only a seventh of the weight of the entire plumage, and it is suggested that their protracted moult results not so much from their energy requirements, as from the need to maintain efficient flight. Variation in the rate of moult in the remiges was much less pronounced than in the body feathers. Bullfinches were less active during moult than at other times of the year. The weights of both adults and juveniles increased during moult. The food during the moult period is described. In all years, most Bullfinches finished moulting just before food became scarce, even though this occurred at different times in different years. In one year, adults moulting latest in the season probably survived less well than those moulting earlier; the same was apparently true of the juveniles in all years. The timing of moult in the Bullfinch, and the factors initiating it, are discussed in relation to the breeding season and foodsupply near Oxford.     

Biannual complete moult in the Black-chested Prinia Prinia flavicans

The Black-chested Prinia Prinia flavicans shows two distinctive periods each year during which adult birds undergo a complete moult: there is a fast moult (about 67 days) in spring (September-November) involving all birds simultaneously and a slower moult (about 108 days) in autumn (February-June), when about 95% of adults are moulting during April. A biannual complete moult pattern was also shown to occur in individual birds. The pattern of secondary replacement was variable and unusual for a passerine; the majority replaced S8 to S5/S4 descendantly, or had feathers being renewed ascendantly amongst S4-S7 before the ascendant series starting from the outermost secondary reached the middle secondaries. The descendant series tended to be longer during the autumn moult with S4 most frequently being the last to be replaced in autumn, but S5 last in spring. Breeding was erratic during summer in response to rains and sometimes overlapped extensively with moulting, the onset of which was less variably timed. When breeding occurred during the autumn moult, the new plumage was not the usual winter plumage (without the chest-band), but a new summer plumage.     

Lesser Whitethroats under time-constraint moult more rapidly and grow shorter wing feathers

Migrating passerines moulting in the breeding quarters before autumn migration sometimes end up with less time than needed for a normal moult. To deal with this the birds could for example suspend moult or moult faster. In this paper we investigate the effect of an induced time-constraint on the moult of Lesser Whitethroats Sylvia curruca . The time-constraint was induced through a shift in light regime large enough to transfer the birds to a date when, under normal conditions, they already should have started moulting. Time-constrained birds moulted faster and also grew shorter wing feathers, resulting in a shorter wing, compared to control birds. Only one individual responded by interrupting moult and retained a number of inner primaries unmoulted. The observed adjustments of moult, and the higher fuel loads towards the end of moult, are consistent with the ideas that time is an important factor in bird migration, affecting not only migration but also the events preceding it.     

Increase of feather quality during moult: a possible implication of feather deformities in the evolution of partial moult in the great tit Parus major

Here we investigate the change in feather quality during partial post‐juvenile and complete post‐breeding moult in great tit Parus major by measuring the change in the number of fault bars and feather holes on wing and tail feathers. Feathers grown during ontogeny usually are of lower quality than feathers grown following subsequent moults at independence. This is reflected by higher number of fault bars and feather holes on juveniles compared to adults. Fault bars are significantly more common on tail and proximal wing feathers than on the distal remiges, indicating a mechanism of adaptive allocation of stress induced abnormalities during ontogeny into the aerodynamically less important flight feathers. On the contrary, feather holes produced probably by chewing lice have a more uniform distribution on wing and tail feathers, which may reflect the inability of birds to control their distribution, or the weak natural selection imposed by them. The adaptive value of the differential allocation of fault bar between groups of feathers seems to be supported by the significantly higher recapture probability of those juvenile great tits which have fewer fault bars at fledging on the aerodynamically most important primaries, but not on other groups of flight feathers. The selection imposed by feather holes seems to be smaller, since except for the positive association between hatching date, brood size and the number of feather holes at fledging, great tits' survival was not affected by the number of feather holes. During post‐juvenile moult, the intensity of fault bars drops significantly through the replacement of tail feathers and tertials, resulting in disproportional reduction of the total number of fault bars on flight feathers related to the number of feathers replaced. The reduction in the number of fault bars during post‐juvenile moult associated with their adaptive allocation to proximal wing feathers and rectrices may explain the evolution of partial post‐juvenile moult in the great tit, since the quality of flight feathers can be increased significantly at a relatively small cost. Our results may explain the widespread phenomenon of partial post‐juvenile moult of flight feathers among Palearctic passerines. During the next complete post‐breeding moult, the total number of fault bars on flight feathers has remained unchanged, indicating the effectiveness of partial post‐juvenile moult in reducing the number of adaptively allocated fault bars. The number of feather holes has also decreased on groups of feathers replaced during partial post‐juvenile moult, but the reduction is proportional with the number of feathers moulted. In line with this observation, the number of feather holes is further reduced during post‐breeding moult on primaries and secondaries, resulting in an increase in feather quality of adult great tits.     

Annual routines of non-migratory birds: optimal moult strategies

In a periodically changing environment it is important for animals to properly time the major events of their life in order to maximise their lifetime fitness. For a non-migratory bird the timing of breeding and moult are thought to be the most crucial. We develop a state-dependent optimal annual routine model that incorporates explicit density dependence in the food supply. In the model the birds' decisions depend on the time of year, their energy reserves, breeding status, experience, and the quality of two types of feathers (outer and inner primaries). Our model predicts that, under a seasonal environment, feathers with large effects on flight ability, higher abrasion rate and lower energetic cost of moult should be moulted closer to the winter (i.e. later) than those with the opposite attributes. Therefore, we argue that the sequence of moult may be an adaptive response to the problem of optimal timing of moult of differing feathers within the same feather tract. The model also predicts that environmental seasonality greatly affects optimal annual routines. Under high seasonality birds breed first then immediately moult, whereas under low seasonality an alternation occurs between breeding and moulting some of the feathers in one year and having a complete moult but no breeding in the other year. Increasing food abundance has a similar effect.     

Why renew fresh feathers? Advantages and conditions for the evolution of complete post‐juvenile moult

Juveniles of several passerine species renew all of their fresh juvenile feathers immediately after fledging (complete post‐juvenile moult), in contrast to the majority, which perform a partial post‐juvenile moult. To understand the adaptive roles of this phenomenon we compared the quality of juvenile plumage in species that perform a complete post‐juvenile moult with that of species which perform a partial post‐juvenile moult; we similarly compared juveniles and adults in each of these groups. The quality of feathers was measured by mass of primaries, colour, and length. In species which perform a complete post‐juvenile moult the plumage quality of second‐year individuals, in their first breeding season, is similar to the plumage quality of adults, unlike those species that perform a partial post‐juvenile moult. In species which perform complete post‐juvenile moult, the quality of the feathers grown in the nest is lower than the quality of adult post‐breeding feathers. In contrast, in species which perform partial post‐juvenile moult the quality of the feathers grown in the nest is similar to that of adult post‐breeding feathers. We found that a complete post‐juvenile moult strategy is much more common 1) in residents and short‐distance migrants than in long‐distance migrants, 2) in southern latitudes, 3) in species with medium body mass and 4) in omnivores and granivores. Our results indicate two adaptive roles of the complete post‐juvenile moult strategy: 1) achieving high quality plumage in the first year which may increase individual survival probability and fitness and 2) allocating fewer resources to nestling plumage and more to nestling development, which enables the nestlings to leave the nest earlier, thus reducing the probability of encountering nest predators. We suggest that the complete post‐juvenile moult, immediately after fledging, is an optimal strategy in favourable habitats and under low time constraints, as in some tropical ecosystems.     

Late‐moulting Black‐necked Grebes Podiceps nigricollis show greater body mass in the face of failing food supply

From August to December, thousands of Black‐necked Grebes Podiceps nigricollis concentrate during the flightless moult period in salt ponds in the Odiel Marshes, southern Spain, where they feed on the brine shrimp Artemia parthenogenetica. We predicted that because Black‐necked Grebes moulted in a food‐rich, predator‐free environment, there would be no net loss of body mass caused by the use of fat stored to meet energy needs during remigial feather replacement (as is the case for some other diving waterbirds). However, because the food resource disappears in winter, we predicted that grebes moulting later in the season would put on more body mass prior to moult because of the increasing risk of an Artemia population crash before the moult period is completed. Body mass determinations of thousands of birds captured during 2000–2010 showed that grebes in active wing‐moult showed greater mass with date of capture. Early‐moulting grebes were significantly lighter at all stages than late‐moulting birds. Grebes captured with new feathers post‐moult were significantly lighter than those in moult. This is the first study to support the hypothesis that individual waterbirds adopt different strategies in body mass accumulation according to timing of moult: early‐season grebes were able to acquire an excess of energy over expenditure and accumulate fat stores while moulting. Delayed moulters acquired greater fat stores in advance of moult to contribute to energy expenditure for feather replacement and retained extra stores later, most likely as a bet hedge against the increasing probability of failing food supply and higher thermoregulatory demands late in the season. An alternative hypothesis, that mass change is affected by a trophically transmitted cestode using brine shrimps as an intermediate host and Black‐necked Grebes as final host, was not supported by the data.     

The moults of captive Scottish ptarmigan (Lagopus mutus)

The moults of captive Scottish ptarmigan were studied at Banchory, north-east Scotland from December 1968 to February 1971. In the autumn moult (June to September) which included the primaries, cock ptarmigan moulted earlier and more completely than hens. In the winter moult (September to February) hens moulted earlier and both sexes moulted more completely than in spring. In the spring moult (February to June) cocks moulted more rapidly to begin with but by mid-April hens had caught up and thereafter moulted at least as rapidly as cocks. When kept indoors at slightly higher temperatures ptarmigan grew more pigmented feathers during the winter moult. In a colder winter the birds became whiter than in a milder one. First-winter ptarmigan completed the winter moult later than older birds. Birds from the Cairnwell hills had more dark feathers in winter than those from the eastern Cairngorms. There was no correlation between the start or finish of egg-laying and moulting.     

SOME INTERESTING RHODESIAN RECORDS—IV

Austin, G. T. 1979. Pattern and timing of moult in penduline tits (Anthoscopus). Ostrich 49:168-173.

Moult was examined in species of Anthoscopus. Second and subsequent prebasic moults were complete. Primary and rectrix moult was typical of passerines, but secondary moult was some what irregular. Moult was largely non-overlapping with breeding, although some body moult was noted during the breeding season. In southern Africa there was some regional variation in timing of moult. First year birds moulted after adults had largely completed feather replacement. This first prebasic moult was incomplete.