Direct and crossover PCR amplification to facilitate Tn5supF-based sequencing of lambda phage clones.

The 264 bp mini-transposon Tn5supF was constructed to sequence DNAs cloned in phage lambda without extensive shotgun subcloning or primer walking. Unique sequences near each transposon end serve as primer binding sites, and a supF gene is used to select transposition to lambda. We describe here PCR methods that facilitate Tn5supF-based sequencing. In a first pass, insertions are mapped relative to the ends of the cloned fragment using pairs of primers specific for vector DNA next to the cloning site and for a Tn5supF end. Most insertions not mapped in this step are near the center of the cloned fragment or in the vector arms, and are then mapped relative to the two innermost insertions by 'crossover' PCR. This involves amplification from primers on different DNA molecules, and generates hybrid DNA products whose lengths correspond to the distances between the two insertions. We routinely amplified more than 6 kb in direct PCR and 3 kb in crossover PCR; at the limit we amplified up to approximately 10 kb in direct PCR and approximately 6 kb in crossover PCR, but not reproducibly. Crossover PCR products were also obtained with insertions separated by only 200 bp, indicating that no rare sites are needed to switch templates. PCR products were purified by adsorption and then elution from glass slurry, and sequenced directly. Ladders of more than 400 bp were obtained from primer sites on each DNA strand; 2 kb was read from crossover PCR products, and showed that they were amplified with fidelity. In conclusion, direct and crossover PCR methods expedite transposon insertion mapping, and yield templates for accurate sequencing of both DNA strands.     

A directed DNA sequencing strategy based upon Tn3 transposon mutagenesis: application to the ADE1 locus on Saccharomyces cerevisiae chromosome I.

We have developed a directed DNA sequencing strategy based upon the Escherichia coli transposon Tn3. This transposon displays little sequence specificity for transposition and is thus well suited to this task. Both mini-Tn3 transposons and sequencing vectors bearing the phage f1 single stranded origin of replication have been constructed. Upon mutagenesis of a target sequence, a population is produced in which each clone has two f1 origins of replication, one of which is at a variable position depending upon the transposon insertion site. When helper phage is added to the mutagenised population, the two f1 origins present on each clone are nicked, dividing the packaged strand into two segments, each of which is packaged into a separate phage particle. One of these segments contains no resistance markers and is lost, whilst the other is recovered as a deleted clone with a single chimeric f1 origin. A unidirectionally, variably-deleted set of sequencing clones is produced, and appropriately sized clones are sequenced using a primer complimentary to the transposon end. In addition to being inexpensive, the method does not require the same degree of technical expertise needed for many in vitro, enzymatically based methods. The strategy has been used to determine 2.6 kilobases of nucleotide sequence in the Saccharomyces cerevisiae ADE 1 locus.     

A simple,rapid, efficient and inexpensive strategy for sequencing clones from cDNA libraries

In this report, we describe a simple, rapid, efficient and inexpensive strategy for sequencing inserted DNAs from clones of cDNA or gDNA libraries. This strategy uses PCR products directly amplified from transformed bacterial colonies, with universal primers within the vector. The method can be applied for sequencing cDNA or gDNA libraries with up to 4 ∼ 5 kb insert sizes, without overnight liquid culture or plasmid DNA preparation steps. We successfully used this method to analyze clones from full-length, enriched cDNA libraries. Although simple, following this strategy will significantly help researchers to avoid unnecessary steps in the analysis of a cDNA library.     

A simple method for shortening a plasmid genome using a system of plasmid cointegration mediated by a Tn3 mutant

This paper describes a simple method for the isolation of small plasmids of various sizes from pSMI, a derivative of the resistance plasmid R 100. The method is based on the observation that a repressor-negative mutant of the ampicillin-resistance (amp^r) transposon Tn3, Tn3 No. 5, mediates cointegration of a plasmid carrying Tn 3 No. 5 (pMB8::Tn 3 No. 5) into virtually any site on pSMI. The resulting cointegrate plasmids contain the pSMI sequence which is joined with the amp^r gene of the Tn 3 mutant. This cointegration is so frequent that large cointegrate plasmids can be readily detected in the total plasmid DNA prepared from cells carrying pSMI and pMB8::Tn3 No. 5. We were able to isolate small plasmids of various sizes by digesting the total plasmid DNAs with restriction endonucleases which cut both pSM 1 and Tn3 No. 5 sequences present in the cointegrates and subsequently ligating the restriction fragment containing both the amp^r gene and the region necessary for replication of pSMI. Analysis of these plasmids, named pBV plasmids, with restriction endonucleases and by nucleotide sequencing allowed us to determine regions necessary or unnecessary for replication, thus defining a minimal replication region of pSMI. The present method is generally useful for the isolation of small derivatives from any large plasmid for the study of genes and sites adjacent to or within the minimal replication region of the plasmid.     

Formation, characterization and partial purification of a Tn5 strand transfer complex

DNA transposition reactions typically involve a strand transfer step wherein the transposon ends are covalently joined by the transposase protein to a short target site. There is very little known about the transposase-DNA interactions that direct this process, and thus our overall understanding of the dynamics of DNA transposition reactions is limited. Tn5 presents an attractive system for defining such interactions because it has been possible to solve the structure of at least one Tn5 transposition intermediate: a transpososome formed with pre-cleaved ends. However, insertion specificity in the Tn5 system is low and this has hampered progress in generating target-containing transpososomes that are homogeneous in structure (i.e. where a single target site is engaged) and therefore suitable for biochemical and structural analysis. We have developed a system where the Tn5 transpososome integrates almost exclusively into a single target site within a short DNA fragment. The key to establishing this high degree of insertion specificity was to use a target DNA with tandem repeats of a previously characterized Tn5 insertion hotspot. The target DNA requirements to form this strand transfer complex are evaluated. In addition, we show that target DNAs missing single phosphate groups at specific positions are better substrates for strand transfer complex formation relative to the corresponding unmodified DNA fragments. Moreover, utilization of missing phosphate substrates can increase the degree of target site selection. A method for concentrating and partially purifying the Tn5 strand transfer complex is described.     

Consecutive DNA terminator sequencing by using enzymatically generated primers

An improved strategy for the dideoxy chain termination sequencing of M13 recombinant DNA using enzymatically generated primers is presented. It involves synchronous extension of the universal primer with the Klenow fragment of DNA polymerase I at an average rate of 200 deoxynucleoside triphosphates per minute to the immediate downstream region of a preselected restriction enzyme site. Subsequent cleavage with the restriction enzyme generates the short primers with homogeneous 5′ ends which can be used for further sequencing. The next restriction sites are selected in the newly sequenced regions of DNA by means of a microcomputer. By repeating this primer extension-cleavage-sequencing strategy sequences altogether about 6 kb long from several recombinant single-stranded M13 DNAs have been determined by using twenty restriction enzymes with different specificities.     

Transfer of the conjugal tetracycline resistance transposon Tn916 from Streptococcus faecalis to Staphylococcus aureus and identification of some insertion sites in the staphylococcal chromosome.

The Streptococcus faecalis pheromone-dependent conjugative plasmid pAD1::Tn916 and the membrane filter-dependent conjugative plasmid pPD5::Tn916 were used to introduce Tn916 into Staphylococcus aureus by intergeneric protoplast fusions and intergeneric membrane-filter matings. In recombinants obtained by protoplast fusion where no plasmid DNA could be detected, tetracycline resistance resulted from transposition of Tn916 from pAD1 to the S. aureus chromosome. Transformation analyses showed that S. aureus Tn916 chromosomal insertions occurred near pig, ilv, uraA, tyrB, fus, ala, and the trp operon. DNA hybridization analyses of EcoRI- and HindIII-digested chromosomal DNAs confirmed the diversity of chromosomal sites involved and demonstrated that the inserts were Tn916 insertions rather than integrations of all or part of pAD1::Tn916. Both pAD1::Tn916 and pPD5::Tn916 were transferred to S. aureus by membrane-filter matings. These plasmids remained intact and expressed tetracycline resistance in S. aureus. S. aureus strains carrying pAD1::Tn916, but not a chromosomal insert of Tn916, and any one of several conjugal gentamicin-resistance plasmids lost their ability to serve as conjugal donors of the gentamicin-resistance plasmids.     

Rapid amplification and cloning of Tn5 flanking fragments by inverse PCR

A simple approach is described to efficiently amplify DNA sequences flanking transposon Tn5 insertions. The method involves: (i) digestion with a restriction enzyme that cuts within Tn5; (ii) self-ligation under conditions favouring the production of monomeric circles; (iii) four parallel PCR reactions using primers designed to amplify left or right flanking sequences, and to distinguish target amplicons from non-specific products. This reveals the number of Tn5 insertions and the size of flanking genomic restriction fragments, without Southern blot analysis. The amplified product contains restriction sites that facilitate cohesive-end cloning. This rapid method is demonstrated using Tn5 and Tn5-Mob tagged DNA sequences involved in albicidin biosynthesis in Xanthomonas albilineans. It is generally applicable for efficient recovery of DNA sequences flanking transposon Tn5 derivatives in insertional mutagenesis studies.     

Three Tn10-associated excision events: relationship to transposition and role of direct and inverted repeats

We describe three related DNA alterations associated with transposon Tn10: precise excision of Tn10, nearly precise excision of Tn10 and precise excision of the nearly precise excision remnant. DNA sequence analysis shows that each of these alterations results in excision of all or part of the Tn10 element, and each involves specific repeat sequences at or near the ends of the element. Furthermore, all three events are structurally analogous: in each case, excision occurs between two short direct-repeat sequences, with resulting deletion of all intervening material plus one copy of the direct repeat; and in all three cases, the direct repeats involved occur at either end of an inverted repeat. Analysis of mutant Tn10 elements and characterization of bacterial host mutations suggest that all three types of excision events occur by pathways that are fundamentally distinct from the pathway(s) for Tn10-promoted transposition and other DNA rearrangements (deletions and inversions) actively promoted by the element. In addition, precise excision and nearly precise excision appear to occur by very closely related or identical pathways; and several lines of evidence suggest that the 1400 bp inverted repeats at the ends of Tn10 may play a structural role in both of these events. The third excision event appears to occur by yet another pathway.     

Application of random amplified polymorphic DNA (RAPD) assays in identifying conserved regions of actinomycete genomes

Abstract Various arbitrary primers as well as pUC18/19 'reverse' sequencing primers were used for random amplified polymorphic DNA assays. Use of a modified reverse primer led to amplification of one major approx. 1100-bp band from the chromosomal DNA of all actinomycetes tested; however, the band was not found when DNAs from other bacteria were used in comparable experiments. Hybridization experiments showed that these bands all contained similar genomic regions. Subsequent sequencing of four of these fragments showed they each contained the sequence of the 3' end of the 23S rRNA gene, the intergenic region and the start of the 5S rRNA gene.     

Tn7 transposition in vitro proceeds through an excised transposon intermediate generated by staggered breaks in DNA.

We have developed a cell-free system in which the bacterial transposon Tn7 inserts at high frequency into its preferred target site in the Escherichia coli chromosome, attTn7; Tn7 transposition in vitro requires ATP and Tn7-encoded proteins. Tn7 transposes via a cut and paste mechanism in which the element is excised from the donor DNA by staggered double-strand breaks and then inserted into attTn7 by the joining of 3' transposon ends to 5' target ends. Neither recombination intermediates nor products are observed in the absence of any protein component or DNA substrate. Thus, we suggest that Tn7 transposition occurs in a nucleoprotein complex containing several proteins and the substrate DNAs and that recognition of attTn7 within this complex provokes strand cleavages at the Tn7 ends.     

Genotyping‐in‐Thousands by sequencing (GT‐seq) panel development and application to minimally invasive DNA samples to support studies in molecular ecology

Minimally invasive sampling (MIS) is widespread in wildlife studies; however, its utility for massively parallel DNA sequencing (MPS) is limited. Poor sample quality and contamination by exogenous DNA can make MIS challenging to use with modern genotyping‐by‐sequencing approaches, which have been traditionally developed for high‐quality DNA sources. Given that MIS is often more appropriate in many contexts, there is a need to make such samples practical for harnessing MPS. Here, we test the ability for Genotyping‐in‐Thousands by sequencing (GT‐seq), a multiplex amplicon sequencing approach, to effectively genotype minimally invasive cloacal DNA samples collected from the Western Rattlesnake (Crotalus oreganus), a threatened species in British Columbia, Canada. As there was no previous genetic information for this species, an optimized panel of 362 SNPs was selected for use with GT‐seq from a de novo restriction site‐associated DNA sequencing (RADseq) assembly. Comparisons of genotypes generated within and among RADseq and GT‐seq for the same individuals found low rates of genotyping error (GT‐seq: 0.50%; RADseq: 0.80%) and discordance (2.57%), the latter likely due to the different genotype calling models employed. GT‐seq mean genotype discordance between blood and cloacal swab samples collected from the same individuals was also minimal (1.37%). Estimates of population diversity parameters were similar across GT‐seq and RADseq data sets, as were inferred patterns of population structure. Overall, GT‐seq can be effectively applied to low‐quality DNA samples, minimizing the inefficiencies presented by exogenous DNA typically found in minimally invasive samples and continuing the expansion of molecular ecology and conservation genetics in the genomics era.     

Multiplex random priming of internal restriction fragments for DNA sequencing.

An approach for DNA sequencing is described that circumvents the need for synthetic oligonucleotide primers, which seriously restrict the progress of DNA sequencing in the commonly used protocol. The method is based on the use of short restriction fragments as primers randomly distributed along single-stranded templates. Premapping of target DNA is eliminated and subcloning manipulation is minimized. This method has been used successfully for sequencing genes in the range of 2 kb, for which about 10 restriction fragment primers per kilobase were sufficient to generate a continuous overlapping sequence in alignment. The approach has also been readily applied for an automated sequencing system with the fluorescent chain-terminating dideoxynucleotides, thus implying its potential for sequencing large genomic DNAs.     

环境样品中DNA的分离纯化和文库构建

采用研磨 /冻融和SDS/蛋白酶K热处理等理化方法 ,直接从性质不同的环境样品中提取和纯化混合基因组DNA。所获得纯品DNA的产量为每克样品 2～ 1 6μg。对纯品DNA进行限制性内切酶处理后 ,构建了以pUC1 8为载体的DNA文库。建库效率为从每克环境样品获得约 1 0 3～ 1 0 4 个含 3～ 8kb外源随机插入片段的克隆。通过DNA序列测定和基因注释 ,对从文库中随机选取的克隆进行了分析 ,发现外源插入片段均含序列未见报道的新基因。本文所做的尝试对于保存、研究和开发未培养微生物基因资源具有意义     

Monitoring genetically modified rhizobia in field soils using the polymerase chain reaction

Monitoring genetically modified (GM) bacterial inoculants after field release using conventional culture methods can be difficult. An alternative is the detection of marker genes in DNA extracted directly from soil, using specific oligonucleotide primers with the polymerase chain reaction (PCR). The PCR was used to monitor survival of two GM Rhizobium leguminosarum bv. viciae inoculants after release in the field at Rothamsted. One strain, RSM2004, is marked by insertion of transposon Tn 5 ; the second strain, CT0370, released at the same site, is modified by chromosomal integration of a single copy of the gene from E. coli conferring GUS activity. Both GM strains provide a realistic case study for the development of PCR-based detection techniques. Specific primers were developed to amplify regions of the Tn 5 and GUS genetic markers using PCR and conditions optimized for each primer set to routinely detect a signal from 10 fg of purified template DNA, the equivalent of one cell per reaction. Procedures to improve the sensitivity of detection are described, to detect fewer than 50 cells g⁻¹ soil in soil-extracted DNA.     

Purification of mitochondrial and plastid DNA

The size, structure and conformation of mitochondrial and plastid genomes differ dramatically among eukaryotes. Similarly, the yield and purity of extracted organelle DNA also vary, and are crucial factors for the success of restriction mapping and sequencing experiments. We describe here procedures for the purification of organelle DNA from a broad range of eukaryotes. By emphasizing the underlying principles, these procedures will facilitate the development of new species-specific protocols. The presented purification schemes involve either isolation of organelles and subsequent extraction of DNA from this subcellular fraction, or processing of whole-cell lysates followed by CsCl gradient centrifugation to separate nuclear and organelle DNAs according to their A + T content. We have successfully used the described procedures for organelle genome sequencing from diverse eukaryotes, including non-axenic protists. Procedures can be completed in 3-5 days, typically yielding a few micrograms of DNA-ample for sequencing complete genomes.     

Efficient large-scale sequencing of the Escherichia coli genome: implementation of a transposon- and PCR-based strategy for the analysis of ordered lambda phage clones.

We have developed a strategy for efficient sequence analysis of the genome of E. coli K-12 using insertions of a Tn5-derived mini-transposon into overlapping ordered lambda phage clones to provide universal primer-binding sites, and PCR amplification of DNA segments adjacent to the insertions. Transposon-containing clones were selected by blue plaque formation on a dnaBamber lacZamber E. coli strain. Insertion points every 0.5-1 kb were identified by 'analytical PCR' and segments between the transposon inserts and phage arms were amplified by 'preparative PCR' using one biotinylated and one non-biotinylated primer. Single strands of amplified DNA fragments were coupled to Streptoavidin-coated paramagnetic beads (Dynabeads M280) through their biotin tails, purified magnetically, and used as templates for fluorescence-based automatic nucleotide sequencing.     

The use of modified primers to eliminate cycle sequencing artifacts.

Cycle sequencing is the workhorse of DNA sequencing projects, allowing the production of large amounts of product from relatively little template. This cycling regime, which is aimed at linear growth of the desired products, can also produce artifacts by exponential amplification of minor side-products. These artifacts can interfere with sequence determination. In an attempt to allow linear but prevent exponential growth of products, and thus eliminate artifacts, we have investigated the use of primers containing modified residues that cannot be replicated by DNA polymerase. Specifically, we have used primers containing 2'- O -methyl RNA residues or abasic residues. Oligomers consisting of six DNA residues and 20 2'- O -methyl RNA residues, with the DNA residues located at the 3'-end, primed as efficiently as DNA primers but would not support exponential amplification. Oligonucleotides containing fewer DNA residues were not used as efficiently as primers. DNA primers containing a single abasic site located six residues from the 3'-end also showed efficient priming ability without yielding exponential amplification products. Together these results demonstrate that certain types of modified primers can be used to eliminate artifacts in DNA sequencing. The technique should be particularly useful in protocols involving large numbers of cycles, such as direct sequencing of BAC and genomic DNA.     

Efficient mutagenesis method for producing the templates of single nucleotide polymorphisms

DNA templates harboring specific single nucleotide polymorphism (SNP) sites are largely needed as positive controls in practical SNP analysis and in determination of the reliability of newly developed methods in high-throughput screening assays. Here we report a one-step method to produce SNP templates by amplifying a wild-type sequence with primers having single nucleotide mismatches at or near their 3′ ends. A short amplicon harboring an EcoRI site was used to evaluate the feasibility of our strategy. Perfectly matched primers and primers with a single base mismatch occurring from the first base to the sixth base of the EcoRI site were used for primer extension. By using polymerase without a proofreading function, we kept mismatched nucleotides from occurring in extended primer products, as confirmed by EcoRI digestion and sequencing analysis. The strategy of using primers with a single mismatched base and exo- polymerase was shown to be an efficient one-step method for preparing SNP templates, either for application in the development of SNP screening assays or as positive controls in practical SNP assays.