Evaluation of bone remodeling around single dental implants of different lengths: a mechanobiological numerical simulation and validation using clinical data

Algorithmic models have been proposed to explain adaptive behavior of bone to loading; however, these models have not been applied to explain the biomechanics of short dental implants. Purpose of present study was to simulate bone remodeling around single implants of different lengths using mechanoregulatory tissue differentiation model derived from the Stanford theory, using finite elements analysis (FEA) and to validate the theoretical prediction with the clinical findings of crestal bone loss. Loading cycles were applied on 7-, 10-, or 13-mm-long dental implants to simulate daily mastication and bone remodeling was assessed by changes in the strain energy density of bone after a 3, 6, and 12 months of function. Moreover, clinical findings of marginal bone loss in 45 patients rehabilitated with same implant designs used in the simulation (n = 15) were computed to validate the theoretical results. FEA analysis showed that although the bone density values reduced over time in the cortical bone for all groups, bone remodeling was independent of implant length. Clinical data showed a similar pattern of bone resorption compared with the data generated from mathematical analyses, independent of implant length. The results of this study showed that the mechanoregulatory tissue model could be employed in monitoring the morphological changes in bone that is subjected to biomechanical loads. In addition, the implant length did not influence the bone remodeling around single dental implants during the first year of loading.     

Computational simulation of internal bone remodelling around dental implants: a sensitivity analysis

This study aimed to predict the distribution of bone trabeculae, as a density change per unit time, around a dental implant based on applying a selected mathematical remodelling model. The apparent bone density change as a function of the mechanical stimulus was the base of the applied remodelling model that describes disuse and overload bone resorption. The simulation was tested in a finite element model of a screw-shaped dental implant in an idealised bone segment. The sensitivity of the simulation to different mechanical parameters was investigated; these included element edge length, boundary conditions, as well as direction and magnitude of the implant loads. The alteration in the mechanical parameters had a significant influence on density distribution and model stability, in particular at the cortical bone region. The remodelling model could succeed to achieve trabeculae-like structure around osseointegrated dental implants. The validation of this model to a real clinical case is required.     

Effect of guided bone regeneration on bone quality surrounding dental implants

Bone quality as well as its quantity at the implant interface is responsible for determining stability of the implant system. The objective of this study is to examine the nanoindentation based elastic modulus (E) at different bone regions adjacent to titanium dental implants with guided bone regeneration (GBR) treated with DBM and BMP-2 during different post-implantation periods. Six adult male beagle dogs were used to create circumferential defects with buccal bone removal at each implantation site of mandibles. The implant systems were randomly assigned to only GBR (control), GBR with demineralized bone matrix (DBM), and GBR with DBM + recombinant human bone morphogenetic protein-2 (rhBMP-2) (BMP) groups. Three animals were sacrificed at each 4 and 8 weeks of post-implantation healing periods. Following buccolingual dissection, the E values were assessed at the defects (Defect), interfacial bone tissue adjacent to the implant (Interface), and pre-existing bone tissue away from the implant (Pre-existing). The E values of BMP group had significantly higher than control and DBM groups for interface and defect regions at 4 weeks of post-implantation period and for the defect region at 8 weeks (p < 0.043). DBM group had higher E values than control group only for the defect region at 4 weeks (p < 0.001). The current results indicate that treatment of rhBMP-2 with GBR accelerates bone tissue mineralization for longer healing period because the GBR likely facilitates a microenvironment to provide more metabolites with open space of the defect region surrounding the implant.     

Numerical simulation of the remodelling process of trabecular architecture around dental implants

Dental implants may alter the mechanical environment in the jawbone, thereby causing remodelling and adaptation of the surrounding trabecular bone tissues. To improve the efficacy of dental implant systems, it is necessary to consider the effect of bone remodelling on the performance of the prosthetic systems. In this study, finite element simulations were implemented to predict the evolution of microarchitecture around four implant systems using a previously developed model that combines both adaptive and microdamage-based mechano-sensory mechanisms in bone remodelling process. Changes in the trabecular architecture around dental implants were mainly focused. The simulation results indicate that the orientational and ladder-like architecture around the implants predicted herein is in good agreement with those observed in animal experiments and clinical observations. The proposed algorithms were shown to be effective in simulating the remodelling process of trabecular architecture around dental implant systems. In addition, the architectural features around four typical dental implant systems in alveolar bone were evaluated comparatively.     

FE study of bone quality effect on load-carrying ability of dental implants

Extreme stresses in surrounding bone are among the most important reasons for implant failure. Bone density (quality) is a variable that plays a decisive role in achieving predictable osseointegration and long-term survival of implants. The magnitudes of ultimate occlusal load, which generate ultimate von Mises stress at the critical point of peri-implant area for the spectrum of implants inserted into mandible with four different bone qualities (Lekholm and Zarb classification), were calculated. Geometric models of mandible segment were generated from computed tomography images and analysed with osseointegrated cylindrical implants of various dimensions. Occlusal loads were applied in their natural direction. All materials were assumed to be linearly elastic and isotropic. The investigation suggests that an implant's ultimate occlusal load indicates its load-carrying capacity. As a result, bone loss can be predicted, and viable implants can be selected by comparing the values of their ultimate occlusal load in different clinical conditions.     

1.8 mT不同频率正弦交变电磁场对青年大鼠骨密度及骨形态计量的影响比较

比较不同频率的正弦交变电磁场对SD青年大鼠骨密度及骨形态计量指标的影响,筛选可有效提升大鼠骨密度的频率参数。将32只8周龄SD雌性大鼠随机分为4组:对照组、15 Hz组、30 Hz组、45 Hz组;除对照组外,实验组大鼠每天都给予相应频率的1.8 m T正弦交变电磁场干预,干预时间为90 min。磁场干预8周后,双能X射线骨密度仪检测大鼠全身骨密度、右侧股骨骨密度和椎骨骨密度,ELISA分析血清中骨形成与骨吸收生化指标的含量,右侧胫骨进行荧光间距测量与骨形态计量分析。相比于对照组,15 Hz组、45 Hz组大鼠的全身骨密度、股骨骨密度、椎骨骨密度均明显升高(P0.05),血清中骨钙素与骨保护素含量也显著提升(P0.05);实验组大鼠的胫骨双荧光间距与骨组织静态参数均高于对照组(P0.05)。结果表明,15 Hz、45 Hz正弦交变电磁场可有效提升青年大鼠的骨密度,从而可预防骨质疏松的发生。     

Importance of diameter-to-length ratio in selecting dental implants: a methodological finite element study

Implant dimensions greatly influence load transfer characteristics and the lifetime of a dental system. Excessive stresses at peri-implant area may result in bone failure. Finding the critical point at the implant–bone interface and evaluating the influence of implant diameter-to-length ratio on adjacent bone stresses makes it possible to select implant dimensions. For this, different cylindrical implants were numerically analysed using geometrical models generated from computed tomography images of mandible with osseointegrated implants. All materials were assumed to be linearly elastic and isotropic. Masticatory load was applied in its natural direction, oblique to occlusal plane. Maximum von Mises stresses were located around the implant neck at the critical point of its intersection with the plane of loading and were functions of implant diameter-to-length ratio. It was demonstrated that there exists a certain spectrum of diameter-to-length ratios, which will keep maximum bone stresses at a preset level chosen in accordance with patient's bone strength.     

Timing of pulsed electromagnetic field stimulation does not affect the promotion of bone cell development

Pulsed electromagnetic field (PEMF) devices have been used clinically to promote the healing of surgically resistant fractures in vivo. However, there is a sparsity of data on how the timing of an applied PEMF effects the osteogenic cells that would be present within the fracture gap. The purpose of this study was to examine the response of osteoblast-like cells to a PEMF stimulus, mimicking that of a clinically available device, using four protocols for the timing of the stimulus. The PEMF signal consisted of a 5 ms pulse burst (containing 20 pulses) repeated at 15 Hz. Cultures of a human osteosarcoma cell line, SaOS-2, were exposed to the four timing protocols, each conducted over 3 days. Protocol one stimulated the cells for 8 h each day, protocol two stimulated the cells for 24 h on the first day, protocol three stimulated the cells for 24 h on the second day, and protocol four stimulated the cells for 24 h on the third day. Cells were seeded with either 25,000 or 50,000 cells/well (24-well cell culture plates). All assays showed reduced proliferation and increased differentiation (alkaline phosphatase activity) in the PEMF stimulated cultures compared with the control cultures, except for protocol four alkaline phosphatase measurements. No clear trend was observed between the four protocols; however this may be due to cell density. The results indicated that an osteoblast-like cell line is responsive to a 15 Hz PEMF stimulus, which will stimulate the cell line to into an increasing state of maturity.     

Effect of pulsed electromagnetic field on the proliferation and differentiation potential of human bone marrow mesenchymal stem cells

Pulsed electromagnetic fields (PEMFs) have been used clinically to slow down osteoporosis and accelerate the healing of bone fractures for many years. The aim of this study is to investigate the effect of PEMFs on the proliferation and differentiation potential of human bone marrow mesenchymal stem cells (BMMSC). PEMF stimulus was administered to BMMSCs for 8 h per day during culture period. The PEMF applied consisted of 4.5 ms bursts repeating at 15 Hz, and each burst contained 20 pulses. Results showed that about 59% and 40% more viable BMMSC cells were obtained in the PEMF‐exposed cultures at 24 h after plating for the seeding density of 1000 and 3000 cells/cm², respectively. Although, based on the kinetic analysis, the growth rates of BMMSC during the exponential growth phase were not significantly affected, 20–60% higher cell densities were achieved during the exponentially expanding stage. Many newly divided cells appeared from 12 to 16 h after the PEMF treatment as revealed by the cell cycle analysis. These results suggest that PEMF exposure could enhance the BMMSC cell proliferation during the exponential phase and it possibly resulted from the shortening of the lag phase. In addition, according to the cytochemical and immunofluorescence analysis performed, the PEMF‐exposed BMMSC showed multi‐lineage differentiation potential similar to the control group. Bioelectromagnetics 30:251–260, 2009. © 2009 Wiley‐Liss, Inc.     

Bactericidal efficacy of tissue tolerable plasma on microrough titanium dental implants: An in‐vitro‐study

Surface decontamination remains challenging in peri‐implant infection therapy. To investigate the bactericidal efficacy of tissue tolerable plasma, S. mitis biofilms were created in vitro on 32 microrough titanium dental implants. Biofilm imaging was performed by confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). The implants were either rinsed with 1% NaCl as negative control (C) or irradiated with a diode laser (DL) for 60 sec as positive control or plasma (TTP60, TTP120) for 60 or 120 sec. Subsequently, colony forming units (CFU) were counted. Post‐treatment, implants were further examined using fluorescence microscopy (FM). Median CFU counts differed significantly between TTP60, TTP120 and C (2.19 and 2.2 vs. 3.29 log CFU/ml; p = 0.012 and 0.024). No significant difference was found between TTP60 and TTP120 (p = 0.958). Logarithmic reduction factors were (TTP60) 2.21, (TTP120) 1.93 and (DL) 0.59. Prior to treatment, CLSM and SEM detected adhering bacteria. Post‐treatment FM recorded that the number of dead cells was higher using TTP compared to DL and C. In view of TTP's effectiveness, regardless of resistance patterns and absence of surface alteration, its use in peri‐implant infection therapy is promising. The results encourage conducting clinical studies to investigate its impact on relevant parameters.

Experimental Design     

Cementum is key to periodontal tissue regeneration: A review on apatite microstructures for creation of novel cementum-based dental implants

The cementum is the outermost layer of hard tissue covering the dentin within the root portion of the teeth. It is the only hard tissue with a specialized structure and function that forms a part of both the teeth and periodontal tissue. As such, cementum is believed to be critical for periodontal tissue regeneration. In this review, we discuss the function and histological structure of the cementum to promote crystal engineering with a biochemical approach in cementum regenerative medicine. We review the microstructure of enamel and bone while discussing the mechanism underlying apatite crystal formation to infer the morphology of cementum apatite crystals and their complex structure with collagen fibers. Finally, the limitations of the current dental implant treatments in clinical practice are explored from the perspective of periodontal tissue regeneration. We anticipate the possibility of advancing periodontal tissue regenerative medicine via cementum regeneration using a combination of material science and biochemical methods.     

Proteomic analysis of silica hybrid sol-gel coatings: a potential tool for predicting the biocompatibility of implants in vivo

The interactions of implanted biomaterials with the host organism determine the success or failure of an implantation. Normally, their biocompatibility is assessed using in vitro tests. Unfortunately, in vitro and in vivo results are not always concordant; new, effective methods of biomaterial characterisation are urgently needed to predict the in vivo outcome. As the first layer of proteins adsorbed onto the biomaterial surfaces might condition the host response, mass spectrometry analysis was performed to characterise these proteins. Four distinct hybrid sol-gel biomaterials were tested. The in vitro results were similar for all the materials examined here. However, in vivo, the materials behaved differently. Six of the 171 adsorbed proteins were significantly more abundant on the materials with weak biocompatibility; these proteins are associated with the complement pathway. Thus, protein analysis might be a suitable tool to predict the in vivo outcomes of implantations using newly formulated biomaterials.