The solution structure of eglin c based on measurements of many NOEs and coupling constants and its comparison with X-ray structures.

A high-precision solution structure of the elastase inhibitor eglin c was determined by NMR and distance geometry calculations. A large set of 947 nuclear Overhauser (NOE) distance constraints was identified, 417 of which were quantified from two-dimensional NOE spectra at short mixing times. In addition, a large number of homonuclear 1H-1H and heteronuclear 1H-15N vicinal coupling constants were used, and constraints on 42 chi 1 and 38 phi angles were obtained. Structure calculations were carried out using the distance geometry program DG-II. These calculations had a high convergence rate, in that 66 out of 75 calculations converged with maximum residual NOE violations ranging from 0.17 A to 0.47 A. The spread of the structures was characterized with average root mean square deviations () between the structures and a mean structure. To calculate the unbiased toward any single structure, a new procedure was used for structure alignment. A canonical structure was calculated from the mean distances, and all structures were aligned relative to that. Furthermore, an angular order parameter S was defined and used to characterize the spread of structures in torsion angle space. To obtain an accurate estimate of the precision of the structure, the number of calculations was increased until the and the angular order parameters stabilized. This was achieved after approximately 40 calculations. The structure consists of a well-defined core whose backbone deviates from the canonical structure ca. 0.4 A, a disordered N-terminal heptapeptide whose backbone deviates by 0.8-12 A, and a proteinase-binding loop whose backbone deviates up to 3.0 A. Analysis of the angular order parameters and inspection of the structures indicates that a hinge-bending motion of the binding loop may occur in solution. Secondary structures were analyzed by comparison of dihedral angle patterns. The high precision of the structure allows one to identify subtle differences with four crystal structures of eglin c determined in complexes with proteinases.     

Solution structure of tertiapin determined using nuclear magnetic resonance and distance geometry

The solution structure of tertiapin, a 21-residue bee venom peptide, has been characterized by circular dichroism (CD), two-dimensional nuclear magnetic resonance (NMR) spectroscopy, and distance geometry. A total of 21 lowest error structures were obtained from distance geometry calculations. Superimposition of these structures shows that the backbone of tertiapin is very well defined. One type-I reverse turn from residue 4 to 7 and an α-helix from residue 12 to 19 exist in the structure of tertiapin. The α-helical region is best defined from both conformational analysis and structural superimposition. The overall three-dimensional structure of tertiapin is highly compact resulting from side chain interactions. The structural information obtained from CD and NMR are compared for both tertiapin and apamin (ref. 3), another bee venom peptide. Tertiapin and apamin have some similar secondary structure, but display different tertiary structures. © 1993 Wiley-Liss, Inc.     

Structural consequences of metallothionein dimerization: solution structure of the isolated Cd4-alpha-domain and comparison with the holoprotein dimer

The NMR determination of the structure of Cd(7)-metallothionein was done previously using a relatively large protein concentration that favors dimer formation. The reactivity of the protein is also affected under this condition. To examine the influence of protein concentration on metallothionein conformation, the isolated Cd(4)-alpha-domain was prepared from rabbit metallothionein-2 (MT 2), and its three-dimensional structure was determined by heteronuclear, (1)H-(111)Cd, and homonuclear, (1)H-(1)H NMR, correlation experiments. The three-dimensional structure was refined using distance and angle constraints derived from these two-dimensional NMR data sets and a distance geometry/simulated annealing protocol. The backbone superposition of the alpha-domain from rabbit holoprotein Cd(7)-MT 2 and the isolated rabbit Cd(4)-alpha was measured at a RMSD of 2.0 A. Nevertheless, the conformations of the two Cd-thiolate clusters were distinctly different at two of the cadmium centers. In addition, solvent access to the sulfhydryl ligands of the isolated Cd(4)-alpha cluster was 130% larger due to this small change in cluster geometry. To probe whether these differences were an artifact of the structure calculation, the Cd(4)-alpha-domain structure in rabbit Cd(7)-MT 2 was redetermined, using the previously defined set of NOEs and the present calculation protocol. All calculations employed the same ionic radius for Cd(2+) and same cadmium-thiolate bond distance. The newly calculated structure matched the original with an RMSD of 1.24 A. It is hypothesized that differences in the two alpha-domain structures result from a perturbation of the holoprotein structure because of head-to-tail dimerization under the conditions of the NMR experiments.     

Solution structure of neurotoxin I from the sea anemone Stichodactyla helianthus. A nuclear magnetic resonance, distance geometry, and restrained molecular dynamics study

The three-dimensional structure of the sea anemone polypeptide Stichodactyla helianthus neurotoxin I in aqueous solution has been determined using distance geometry and restrained molecular dynamics simulations based on NMR data acquired at 500 MHz. A set of 470 nuclear Overhauser enhancement values was measured, of which 216 were used as distance restraints in the structure determination along with 15 dihedral angles derived from coupling constants. After restrained molecular dynamics refinement, the eight structures that best fit the input data form a closely related family. They describe a structure that consists of a core of twisted, four-stranded, antiparallel beta-sheet encompassing residues 1-3, 19-24, 29-34, and 40-47, joined by three loops, two of which are well defined by the NMR data. The third loop, encompassing residues 7-16, is poorly defined by the data and is assumed to undergo conformational averaging in solution. Pairwise root mean square displacement values for the backbone heavy atoms of the eight best structures are 1.3 +/- 0.2A when the poorly defined loop is excluded and 3.6 +/- 1.0A for all backbone atoms. Refinement using restrained molecular dynamics improved the quality of the structures generated by distance geometry calculations with respect to the number of nuclear Overhauser enhancements violated, the size of the total distance violations and the total potential energies of the structures. The family of structures for S. heliathus neurotoxin I is compared with structures of related sea anemone proteins that also bind to the voltage-gated sodium channel.     

Refinement of the thrombin-bound structure of a hirudin peptide by a restrained electrostatically driven Monte Carlo method.

Energy refinement of the structure of a linear peptide, hirudin56-65, bound to thrombin was carried out using a conformational search method in combination with restrained minimization. Five conformations originated from nmr data and distance geometry calculations having a similar global folding pattern but quite different backbone conformations were used as the starting structures. As a result of this approach, a series of low-energy conformations compatible with a set of upper and lower bounds of interproton distances determined from transferred nuclear Overhauser effects were found. A comparison among the lowest energy conformations of each run showed that the combination of energy refinement plus distance constraints led to a very well-defined structure for both the backbone and the side chains of the last 7 residues of the polypeptide. Furthermore, the low-energy conformations generated with this technique contain a segment of 3(10)-helix involving the last 5 residues at the COOH terminal end.     

The solution conformation of the antibacterial peptide cecropin A: a nuclear magnetic resonance and dynamical simulated annealing study

The solution conformation of the antibacterial polypeptide cecropin A from the Cecropia moth is investigated by nuclear magnetic resonance (NMR) spectroscopy under conditions where it adopts a fully ordered structure, as judged by previous circular dichroism studies [Steiner, H. (1982) FEBS Lett. 137, 283-287], namely, 15% (v/v) hexafluoroisopropyl alcohol. By use of a combination of two-dimensional NMR techniques the 1H NMR spectrum of cecropin A is completely assigned. A set of 243 approximate interproton distance restraints is derived from nuclear Overhauser enhancement (NOE) measurements. These, together with 32 distance restraints for the 16 intrahelical hydrogen bonds identified on the basis of the pattern of short-range NOEs, form the basis of a three-dimensional structure determination by dynamical simulated annealing [Nilges, M., Clore, G.M., & Gronenborn, A.M. (1988) FEBS Lett. 229, 317-324]. The calculations are carried out starting from three initial structures, an alpha-helix, an extended beta-strand, and a mixed alpha/beta structure. Seven independent structures are computed from each starting structure by using different random number seeds for the assignments of the initial velocities. All 21 calculated structures satisfy the experimental restraints, display very small deviations from idealized covalent geometry, and possess good nonbonded contacts. Analysis of the 21 converged structure indicates that there are two helical regions extending from residues 5 to 21 and from residues 24 to 37 which are very well defined in terms of both atomic root mean square differences and backbone torsion angles. For the two helical regions individually the average backbone rms difference between all pairs of structures is approximately 1 A. The long axes of the two helices lie in two planes, which are at an angle of 70-100 degrees to each other. The orientation of the helices within these planes, however, cannot be determined due to the paucity of NOEs between the two helices.     

The Solution Structure of the Immunodominant and Cell Receptor Binding Regions of Foot-and-mouth Disease Virus Serotype A,Variant A

The solution structure of a 20 amino acid long peptide corresponding to the region 141–160 of the envelope protein Vp1 from foot-and-mouth disease virus (FMDV) serotype A, variant A, has been determined by a combination of NMR experiments and computer calculations. The peptide contains both the immunodominant epitope as well as the sequence (RGD) used by the virus to bind the cell receptor in the initial stages of infection. These two sites have been shown to partially overlap. One hundred and thirty-five NMR distance constraints were used to obtain a set of 11 structures by distance geometry, minimization and molecular dynamics simulations. These structures were divided into two homogeneous families based upon backbone superimposition. The first and most populated family was characterized by a backbone RMS of 1.5±0.4 Å, the second by a backbone RMS of 0.8±0.2 Å. The two families had similar structural features and differed mainly in the backbone angles of G149. In the larger of the two families these angles favoured the formation of a loop comprising residues 147 to 152 and stabilized by a H-bond between the NH of D147 and the CO of A152. In the second family, where this bond was absent, the peptide adopted in this region the shape of an irregular helix. The C-terminal half of the peptide (152–159) was similar in both families and largely helical. Similar structural features were also found within the VRGDS sequence (144–148) which was assigned to a β-turn type IV. The features of the two families of structures were found to be different from those of the recently published X-ray structure of the antigenic loop of a chemically modified form of FMDV. Proposals accounting for these differences are provided which take into account the dual activity of the 141–160 sequence (i.e. antibody binding and cell invasion through receptor binding).     

Determination of the complete three-dimensional structure of the alpha-amylase inhibitor tendamistat in aqueous solution by nuclear magnetic resonance and distance geometry

The complete three-dimensional structure of the alpha-amylase inhibitor Tendamistat in aqueous solution was determined by 1H nuclear magnetic resonance and distance geometry calculations using the program DISMAN. Compared to an earlier, preliminary determination of the polypeptide backbone conformation, stereo-specific assignments were obtained for 41 of the 89 prochiral groups in the protein, and a much more extensive set of experimental constraints was collected, including 842 distance constraints from nuclear Overhauser effects and over 100 supplementary constraints from spin-spin coupling constants and the identification of intramolecular hydrogen bonds. The complete protein molecule, including the amino acid side-chains is characterized by a group of nine structures corresponding to the results of the nine DISMAN calculations with minimal residual error functions. The average of the pairwise minimal root-mean-square distances among these nine structures is 0.85 A for the polypeptide backbone, and 1.52 A for all the heavy atoms. The procedures used for the structure determination are described and a detailed analysis is presented of correlations between the experimental input data and the precision of the structure determination.     

Design, synthesis and solution structure of a renin inhibitor. Structural constraints from NOE, and homonuclear and heteronuclear coupling constants combined with distance geometry calculations.

A macrocyclic renin inhibitor was designed using molecular modeling and a model of human renin. The synthesized molecular displayed poor binding affinity. To investigate the reasons for the observed inactivity, the structure of the compound has been studied by NMR spectroscopy and distance geometry. Structural constraints for distance geometry calculations were derived from nuclear Overhauser effects and homonuclear and heteronuclear three bond coupling constants. Homonuclear coupling constants were measured directly from the resolution-enhanced proton spectra and heteronuclear coupling constants were measured from the natural abundance 15N- and 13C-edited TOCSY experiments. One phi angle was determined uniquely by this method and two were reduced to two possible values each. By using a statistical analysis of 400 structures generated with distance geometry, two families of structures were found to be consistent with the NMR data. The solution structures so derived were different from the originally designed structure, including an internal hydrogen bond. This provides a possible explanation for the lack of effectiveness of this compound.     

The solution structure of a leucine-zipper motif peptide

We report the complete structure determination of a 34 residue synthetic peptide with the amino acid sequence of the dimerization domain (leucine zipper) of GCN4. A high resolution structure in solution was obtained by 1H-NMR studies and distance geometry calculations followed by restrained energy minimization. A set of 20 final structures was obtained with an average root mean square deviation of 1.3 A for the backbone atoms (excluding the first and the last two residues). The structure contains an uninterrupted helix. A comparison with a structure previously determined for a larger peptide containing both the DNA-binding region (basic region) and the leucine-zipper motif shows the structural independence of the leucine-zipper domain from the contiguous DNA binding region.     

Solution structures of proteins from NMR data and modeling: alternative folds for neutrophil peptide 5

The structure of neutrophil peptide 5 in solution has recently been reported (Pardi et al., 1988). The structure determination was accomplished by using a distance geometry algorithm and 107 interproton distance constraints obtained from 2D NMR data. In each of the eight independent solutions to the distance geometry equations, the overall fold of the polypeptide backbone was identical and the root mean square (rms) deviation between backbone atoms of the superimposed structures was small (approximately 2.4 A). In this paper we report additional NP-5 structures obtained by using a new structure generation algorithm: a Monte Carlo search in torsion angle space. These structures have a large rms backbone deviation from the distance geometry structures (approximately 5.0 A). The backbone topologies differ in significant respects from the distance geometry structures and from each other. Structures are found that are pseudo mirror images of part or all of the fold corresponding to that first obtained with the distance geometry procedure. For small proteins, the problem of distinguishing the correct structure among pseudo mirror images is likely to be greater than previously recognized. When a set of test distance constraints constructed from a novel Monte Carlo structure is used as input in the distance geometry algorithm, the fold of the resulting structure does not correspond to that of the target. The results also demonstrate that the previously accepted criteria (the magnitude of the rms deviation between multiple solutions of the distance geometry equations) for defining the accuracy and precision of a peptide structure generated from NMR data are inadequate. An energetic analysis of structures corresponding to the different folding topologies has been carried out. The molecular mechanics energies obtained by minimization and molecular dynamics refinement provide sufficient information to eliminate certain alternative structures. On the basis of a careful comparison of the different trial structures with the experimental data, it is concluded that the NP-5 peptide fold which was originally reported is most consistent with the data. An alternative fold corresponding to structures with low energies and small total distance violations is ruled out because for this fold predicted NOEs are not observed experimentally.     

Backbone folding of the polypeptide cardiac stimulant anthopleurin-A determined by nuclear magnetic resonance, distance geometry and molecular dynamics

The solution conformation of the cardiac stimulatory sea anemone polypeptide anthopleurin-A has been characterised using distance geometry and restrained molecular dynamics calculations. A set of 253 approximate interproton distance restraints and 14 peptide backbone torsion angle restraints derived from two-dimensional 1H-NMR spectra at 500 MHz were used as input for these calculations. 13 structures generated by either metric matrix or variable target function distance geometry calculations were refined using energy minimisation and restrained molecular dynamics. The resulting structures contain a region of twisted antiparellel beta-sheet to which two separate regions of unordered chain are linked by three disulphide bonds. Two loops, one including Pro-41 and the other encompassing residues 10-18, are poorly defined by the NOE data.     

An improved solution structure for psi-conotoxin PiiiE

A revised, high-resolution structure of psi-conotoxin Piiie (psi-Piiie), a noncompetitive inhibitor of the nicotinic acetylcholine receptor (nAChR), produced through the use of NMR and molecular modeling calculations is presented. The original structures of psi-Piiie had a relatively high degree of disorder, particularly in the conformation of the disulfide bridges. Our studies utilized (13)C-labeling of selected cysteine residues allowing the resolution of all problems of resonance overlap for the cysteine residues. The improved data were used to produce a new set of structures by a molecular modeling process incorporating relaxation matrix methods for the determination of interproton distance restraints and a combination of distance geometry and simulated annealing for structure generation. The structures produced are very well converged with the RMSD of backbone atom positions of the main body of the peptide improving from 0.73 to 0.13 A. Other indicators of correlation with the experimental data and quality of covalent geometry showed significant improvement in the new structures. The overall conformation of the peptide backbone is similar between the two determinations with the exception of the N-terminus. This difference leads to a significant effect on the predicted distribution of positive charge within psi-Piiie, a property likely to influence interpretation of future mutational studies.     

Three-dimensional solution structure of the HIV-1 protease complexed with DMP323, a novel cyclic urea-type inhibitor, determined by nuclear magnetic resonance spectroscopy.

The three-dimensional solution structure of the HIV-1 protease homodimer, MW 22.2 kDa, complexed to a potent, cyclic urea-based inhibitor, DMP323, is reported. This is the first solution structure of an HIV protease/inhibitor complex that has been elucidated. Multidimensional heteronuclear NMR spectra were used to assemble more than 4,200 distance and angle constraints. Using the constraints, together with a hybrid distance geometry/simulated annealing protocol, an ensemble of 28 NMR structures was calculated having no distance or angle violations greater than 0.3 A or 5 degrees, respectively. Neglecting residues in disordered loops, the RMS deviation (RMSD) for backbone atoms in the family of structures was 0.60 A relative to the average structure. The individual NMR structures had excellent covalent geometry and stereochemistry, as did the restrained minimized average structure. The latter structure is similar to the 1.8-A X-ray structure of the protease/DMP323 complex (Chang CH et al., 1995, Protein Science, submitted); the pairwise backbone RMSD calculated for the two structures is 1.22 A. As expected, the mismatch between the structures is greatest in the loops that are disordered and/or flexible. The flexibility of residues 37-42 and 50-51 may be important in facilitating substrate binding and product release, because these residues make up the respective hinges and tips of the protease flaps. Flexibility of residues 4-8 may play a role in protease regulation by facilitating autolysis.     

Solution conformation of thymosin beta 4: a nuclear magnetic resonance and simulated annealing study

The conformation of the polypeptide thymosin beta 4 in solutions of 60% (v/v) trifluoroethanol-d3 and 50% (v/v) hexafluoroisopropyl-d2 alcohol in water is investigated by nuclear magnetic resonance (NMR) spectroscopy. Under these conditions thymosin beta 4 adopts an ordered structure. By use of a combination of two-dimensional NMR techniques, the 1H NMR spectrum of thymosin beta 4 is assigned. A set of 180 approximate interproton distance constraints is derived from nuclear Overhauser enhancement (NOE) measurements. These, together with 33 phi constraints obtained for JNH alpha coupling data and the 23 psi dihedral angles identified on the basis of the pattern of short-range NOEs, form the basis of a three-dimensional structure determination by dynamical simulated annealing. The calculations are carried out starting from three initial structures, an alpha-helix, an extended beta-strand, and a mixed alpha/beta structure. Ten independent structures are computed from each starting structure by using different random number seeds for the assignments of the initial velocities. All 30 calculated structures satisfy the experimental constraints, display very small deviations from idealized covalent geometry, and possess good nonbonded contacts. Analysis of the 30 converged structures indicates that there are two helical regions extending from residues 4-16 and from residues 30-40, which are well defined both in terms of atomic root mean square differences and backbone torsion angles. For the two helical regions individually the average backbone rms difference between all pairs of structures is approximately 2 A. The two helices exhibit typical amino acid preferences for specific locations at the ends of helices.(ABSTRACT TRUNCATED AT 250 WORDS)     

The three-dimensional structure of guanine-specific ribonuclease F1 in solution determined by NMR spectroscopy and distance geometry.

Two-dimensional 1H-NMR studies have been performed on ribonuclease F1 (RNase F1), which contains 106 amino acid residues. Sequence-specific resonance assignments were accomplished for the backbone protons of 99 amino acid residues and for most of their side-chain protons. The three-dimensional structures were constructed on the basis of 820 interproton-distance restraints derived from NOE, 64 distance restraints for 32 hydrogen bonds and 33 phi torsion-angle restraints. A total of 40 structures were obtained by distance geometry and simulated-annealing calculations. The average root-mean-square deviation (residues 1-106) between the 40 converged structures and the mean structure obtained by averaging their coordinates was 0.116 +/- 0.018 nm for the backbone atoms and 0.182 +/- 0.015 nm for all atoms including the hydrogen atoms. RNase F1 was determined to be an alpha/beta-type protein. A well-defined structure constitutes the core region, which consists of a small N-terminal beta-sheet (beta 1, beta 2) and a central five-stranded beta-sheet (beta 3-beta 7) packed on a long helix. The structure of RNase F1 has been compared with that of RNase T1, which was determined by X-ray crystallography. Both belong to the same family of microbial ribonucleases. The polypeptide backbone fold of RNase F1 is basically identical to that of RNase T1. The conformation-dependent chemical shifts of the C alpha protons are well conserved between RNase F1 and RNase T1. The residues implicated in catalysis are all located on the central beta-sheet in a geometry similar to that of RNase T1.     

NMR structure of cysteinyl-phosphorylated enzyme IIB of the N,N'-diacetylchitobiose-specific phosphoenolpyruvate-dependent phosphotransferase system of Escherichia coli

The determination by NMR of the solution structure of the phosphorylated enzyme IIB (P-IIB(Chb)) of the N,N'-diacetylchitobiose-specific phosphoenolpyruvate-dependent phosphotransferase system of Escherichia coli is presented. Most of the backbone and side-chain resonances were assigned using a variety of mostly heteronuclear NMR experiments. The remaining resonances were assigned with the help of the structure calculations.NOE-derived distance restraints were used in distance geometry calculations followed by molecular dynamics and simulated annealing protocols. In addition, combinations of ambiguous restraints were used to resolve ambiguities in the NOE assignments. By combining sets of ambiguous and unambiguous restraints into new ambiguous restraints, an error function was constructed that was less sensitive to information loss caused by assignment uncertainties. The final set of structures had a pairwise rmsd of 0.59 A and 1.16 A for the heavy atoms of the backbone and side-chains, respectively.Comparing the P-IIB(Chb) solution structure with the previously determined NMR and X-ray structures of the wild-type and the Cys10Ser mutant shows that significant differences between the structures are limited to the active-site region. The phosphoryl group at the active-site cysteine residue is surrounded by a loop formed by residues 10 through 16. NOE and chemical shift data suggest that the phosphoryl group makes hydrogen bonds with the backbone amide protons of residues 12 and 15. The binding mode of the phosphoryl group is very similar to that of the protein tyrosine phosphatases. The differences observed are in accordance with the presumption that IIB(Chb) has to be more resistant to hydrolysis than the protein tyrosine phosphatases. We propose a proton relay network by which a transfer occurs between the cysteine SH proton and the solvent via the hydroxyl group of Thr16.     

The conformations of hirudin in solution: a study using nuclear magnetic resonance, distance geometry and restrained molecular dynamics

The solution conformations of the protein hirudin have been investigated by the combined use of distance geometry and restained molecular dynamics calculations. The basis for the structure determination comprised 359 approximate inter-proton distance restrains and 10 phi backbone torsion angle restrains derived from n.m.r. measurements. It is shown that hirudin is composed of three domains: a central core made up of residues 3-30, 37-46 and 56-57; a protruding 'finger' (residues 31-36) consisting of the tip of an antiparallel beta sheet, and an exposed loop (residues 47-55). The structure of each individual domain is relatively well defined with average backbone atomic r.m.s. differences of <2 A between the final seven converged restrained dynamic structures and the mean structure obtained by averaging their coordinates. The orientation of the two minor domains relative to the central core, however, could not be determined as no long-range (i-h >5) interdomain proton-proton contacts could be observed in the two-dimensional nuclear Overhauser enhancement spectra. From the restrained molecular dynamics calculations it appears that the two minor domains exhibit large rigid-body motions relative to the central core.     

Solution structures of the rabbit neutrophil defensin NP-5

Solution structures of the rabbit neutrophil defensin NP-5 have been determined by 1H nuclear magnetic resonance (n.m.r.) spectroscopy and distance geometry techniques. This 33 amino acid peptide is part of the oxygen-independent mammalian defense system against microbial infection. The structures were generated from 107 n.m.r. derived inter-residue proton-proton distance constraints. A distance geometry algorithm was then used to determine the range of structures consistent with these distance constraints. These distance geometry calculations employed an improved algorithm that allowed the chirality constraints to be relaxed on prochiral centers when it was not possible to make stereo-specific assignments of protons on these centers. This procedure gave superior results compared with standard distance geometry methods and also produced structures that were more consistent with the original n.m.r. data. Analysis of the NP-5 structures shows that the overall folding of the peptide backbone is well defined by the n.m.r. distance information but that the side-chain group conformations are generally less well defined.     

Pseudo-structures for the 20 common amino acids for use in studies of protein conformations by measurements of intramolecular proton-proton distance constraints with nuclear magnetic resonance

"Pseudo-structures" of the 20 common amino acid residues are introduced for use in protein spatial structure determinations, which rely on the use of intramolecular proton-proton distance constraints determined by nuclear Overhauser effects as input for distance geometry calculations. The proposed structures satisfy requirements for the initial structural interpretation of the nuclear magnetic resonance data that arise from the absence of stereospecific assignments and/or limited spectral resolution for certain resonance lines. The pseudo-atoms used as reference points for the experimental distance constraints can be used in conjunction with the real amino acid structures representing the van der Waals' constraints on the spatial molecular structure, or with simplified models in order to reduce the computing time for the distance geometry calculations.