Butanol production from sweet sorghum bagasse with high solids content: Part I—comparison of liquid hot water pretreatment with dilute sulfuric acid

In these studies, we pretreated sweet sorghum bagasse (SSB) using liquid hot water (LHW) or dilute H₂SO₄ (2 g L^?1) at 190°C for zero min (as soon as temperature reached 190°C, cooling was started) to reduce generation of sugar degradation fermentation inhibiting products such as furfural and hydroxymethyl furfural (HMF). The solids loading were 250–300 g L^?1. This was followed by enzymatic hydrolysis. After hydrolysis, 89.0 g L^?1 sugars, 7.60 g L^?1 acetic acid, 0.33 g L^?1 furfural, and 0.07 g L^?1 HMF were released. This pretreatment and hydrolysis resulted in the release of 57.9% sugars. This was followed by second hydrolysis of the fibrous biomass which resulted in the release of 43.64 g L^?1 additional sugars, 2.40 g L^?1 acetic acid, zero g L^?1 furfural, and zero g L^?1 HMF. In both the hydrolyzates, 86.3% sugars present in SSB were released. Fermentation of the hydrolyzate I resulted in poor acetone‐butanol‐ethanol (ABE) fermentation. However, fermentation of the hydrolyzate II was successful and produced 13.43 g L^?1 ABE of which butanol was the main product. Use of 2 g L^?1 H₂SO₄ as a pretreatment medium followed by enzymatic hydrolysis resulted in the release of 100.6–93.8% (w/w) sugars from 250 to 300 g L^?1 SSB, respectively. LHW or dilute H₂SO₄ were used to economize production of cellulosic sugars from SSB. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:960–966, 2018     

High solid fed‐batch butanol fermentation with simultaneous product recovery: Part II—process integration

In these studies, liquid hot water (LHW) pretreated and enzymatically hydrolyzed Sweet Sorghum Bagasse (SSB) hydrolyzates were fermented in a fed‐batch reactor. As reported in the preceding paper, the culture was not able to ferment the hydrolyzate I in a batch process due to presence of high level of toxic chemicals, in particular acetic acid released from SSB during the hydrolytic process. To be able to ferment the hydrolyzate I obtained from 250 g L^?1 SSB hydrolysis, a fed‐batch reactor with in situ butanol recovery was devised. The process was started with the hydrolyzate II and when good cell growth and vigorous fermentation were observed, the hydrolyzate I was slowly fed to the reactor. In this manner the culture was able to ferment all the sugars present in both the hydrolyzates to acetone butanol ethanol (ABE). In a control batch reactor in which ABE was produced from glucose, ABE productivity and yield of 0.42 g L^?1 h^?1 and 0.36 were obtained, respectively. In the fed‐batch reactor fed with SSB hydrolyzates, these productivity and yield values were 0.44 g L^?1 h^?1 and 0.45, respectively. ABE yield in the integrated system was high due to utilization of acetic acid to convert to ABE. In summary we were able to utilize both the hydrolyzates obtained from LHW pretreated and enzymatically hydrolyzed SSB (250 g L^?1) and convert them to ABE. Complete fermentation was possible due to simultaneous recovery of ABE by vacuum. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:967–972, 2018     

Butanol production from concentrated lactose/whey permeate: Use of pervaporation membrane to recover and concentrate product

In these studies, butanol (acetone butanol ethanol or ABE) was produced from concentrated lactose/whey permeate containing 211 g L^?1 lactose. Fermentation of such a highly concentrated lactose solution was possible due to simultaneous product removal using a pervaporation membrane. In this system, a productivity of 0.43 g L^?1 h^?1 was obtained which is 307 % of that achieved in a non-product removal batch reactor (0.14 g L^?1 h^?1) where approximately 60 g L^?1 whey permeate lactose was fermented. The productivity obtained in this system is much higher than that achieved in other product removal systems (perstraction 0.21 g L^?1 h^?1 and gas stripping 0.32 g L^?1 h^?1). This membrane was also used to concentrate butanol from approximately 2.50 g L^?1 in the reactor to 755 g L^?1. Using this membrane, ABE selectivities and fluxes of 24.4–44.3 and 0.57–4.05 g m^?2 h^?1 were obtained, respectively. Pervaporation restricts removal of water from the reaction mixture thus requiring significantly less energy for product recovery when compared to gas stripping.     

Production of butanol and isopropanol with an immobilized <Emphasis Type="Italic">Clostridium</Emphasis>

Clostridium beijerinckii optinoii is a Clostridium species that produces butanol, isopropanol and small amounts of ethanol. This study compared the performances of batch and continuous immobilized cell fermentations, investigating how media flow rates and nutritional modification affected solvent yields and productivity. In 96-h batch cultures, with 80 % of the 30 g L^?1 glucose consumed in synthetic media, solvent concentration was 9.45 g L^?1 with 66.0 % as butanol. In a continuous fermentation using immobilized C. beijerinckii optinoii cells, also with 80 % of 30 g L^?1 glucose utilization, solvent productivity increased to 1.03 g L^?1 h^?1. Solvent concentration reached 12.14 g L^?1 with 63.0 % as butanol. Adjusting the dilution rate from 0.085 to 0.050 h^?1 to allow extended residence time in column was required when glucose concentration in fresh media was increased from 30 to 50 g L^?1. When acetate was used to improve the buffer capacity in media, the solvent concentration reached 12.70 on 50 g L^?1 glucose. This continuous fermentation using immobilized cells showed technical feasibility for solvent production.     

Microbial production of a biofuel (acetone–butanol–ethanol) in a continuous bioreactor: impact of bleed and simultaneous product removal

Acetone butanol ethanol (ABE) was produced in an integrated continuous one-stage fermentation and gas stripping product recovery system using Clostridium beijerinckii BA101 and fermentation gases (CO₂ and H₂). In this system, the bioreactor was fed with a concentrated sugar solution (250–500 g L^?1 glucose). The bioreactor was bled semi-continuously to avoid accumulation of inhibitory chemicals and products. The continuous system was operated for 504 h (21 days) after which the fermentation was intentionally terminated. The bioreactor produced 461.3 g ABE from 1,125.0 g total sugar in 1 L culture volume as compared to a control batch process in which 18.4 g ABE was produced from 47.3 g sugar. These results demonstrate that ABE fermentation can be operated in an integrated continuous one-stage fermentation and product recovery system for a long period of time, if butanol and other microbial metabolites in the bioreactor are kept below threshold of toxicity.     

Acetone–butanol–ethanol production with high productivity using Clostridium acetobutylicum BKM19

Conventional acetone–butanol–ethanol (ABE) fermentation is severely limited by low solvent titer and productivities. Thus, this study aims at developing an improved Clostridium acetobutylicum strain possessing enhanced ABE production capability followed by process optimization for high ABE productivity. Random mutagenesis of C. acetobutylicum PJC4BK was performed by screening cells on fluoroacetate plates to isolate a mutant strain, BKM19, which exhibited the total solvent production capability 30.5% higher than the parent strain. The BKM19 produced 32.5 g L^?1 of ABE (17.6 g L^?1 butanol, 10.5 g L^?1 ethanol, and 4.4 g L^?1 acetone) from 85.2 g L^?1 glucose in batch fermentation. A high cell density continuous ABE fermentation of the BKM19 in membrane cell‐recycle bioreactor was studied and optimized for improved solvent volumetric productivity. Different dilution rates were examined to find the optimal condition giving highest butanol and ABE productivities. The maximum butanol and ABE productivities of 9.6 and 20.0 g L^?1 h^?1, respectively, could be achieved at the dilution rate of 0.85 h^?1. Further cell recycling experiments were carried out with controlled cell‐bleeding at two different bleeding rates. The maximum solvent productivities were obtained when the fermenter was operated at a dilution rate of 0.86 h^?1 with the bleeding rate of 0.04 h^?1. Under the optimal operational condition, butanol and ABE could be produced with the volumetric productivities of 10.7 and 21.1 g L^?1 h^?1, and the yields of 0.17 and 0.34 g g^?1, respectively. The obtained butanol and ABE volumetric productivities are the highest reported productivities obtained from all known‐processes. Biotechnol. Bioeng. 2013; 110: 1646–1653. © 2013 Wiley Periodicals, Inc.     

Production of optically pure <Emphasis Type="SmallCaps">l</Emphasis>(+)-lactic acid from waste plywood chips using an isolated thermotolerant <Emphasis Type="Italic">Enterococcus faecalis</Emphasis> SI at a pilot scale

Utilization of renewable and low-cost lignocellulosic wastes has received major focus in industrial lactic acid production. The use of high solid loadings in biomass pretreatment potentially offers advantages over low solid loadings including higher lactic acid concentration with decreased production and capital costs. In this study, an isolated Enterococcus faecalis SI with optimal temperature 42 °C was used to produce optically pure l-lactic acid (>?99%) from enzyme-saccharified hydrolysates of acid-impregnated steam explosion (AISE)-treated plywood chips. The l-lactic acid production increased by 10% at 5 L scale compared to the similar fermentation scheme reported by Wee et al. The fermentation with a high solid loading of 20% and 35% (w/v) AISE-pretreated plywood chips had been successfully scaled up to process development unit scale (100 L) and pilot scale (9 m³), respectively. This is the first report of pilot-scale lignocellulosic lactic acid fermentation by E. faecalis with high lactic acid titer (nearly 92 g L^?1) and yield (0.97 kg kg^?1). Therefore, large-scale l-lactic acid production by E. faecalis SI shows the potential application for industries.     

Enhancing ethanol production from cellulosic sugars using <Emphasis Type="Italic">Scheffersomyces (Pichia) stipitis</Emphasis>

Studies were performed on the effect of CaCO₃ and CaCl₂ supplementation to fermentation medium for ethanol production from xylose, glucose, or their mixtures using Scheffersomyces (Pichia) stipitis. Both of these chemicals were found to improve maximum ethanol concentration and ethanol productivity. Use of xylose alone resulted in the production of 20.68 ± 0.44 g L^?1 ethanol with a productivity of 0.17 ± 0.00 g L^?1 h^?1, while xylose plus 3 g L^?1 CaCO₃ resulted in the production of 24.68 ± 0.75 g L^?1 ethanol with a productivity of 0.21 ± 0.01 g L^?1 h^?1. Use of xylose plus glucose in combination with 3 g L^?1 CaCO₃ resulted in the production of 47.37 ± 0.55 g L^?1 ethanol (aerobic culture), thus resulting in an ethanol productivity of 0.39 ± 0.00 g L^?1 h^?1. These values are 229 % of that achieved in xylose medium. Supplementation of xylose and glucose medium with 0.40 g L^?1 CaCl₂ resulted in the production of 44.84 ± 0.28 g L^?1 ethanol with a productivity of 0.37 ± 0.02 g L^?1 h^?1. Use of glucose plus 3 g L^?1 CaCO₃ resulted in the production of 57.39 ± 1.41 g L^?1 ethanol under micro-aerophilic conditions. These results indicate that supplementation of cellulosic sugars in the fermentation medium with CaCO₃ and CaCl₂ would improve economics of ethanol production from agricultural residues.     

Acetone–butanol–ethanol production from corn stover pretreated by alkaline twin-screw extrusion pretreatment

In this study, the alkaline twin-screw extrusion pretreated corn stover was subjected to enzymatic hydrolysis after washing. The impact of solid loading and enzyme dose on enzymatic hydrolysis was investigated. It was found that 68.2 g/L of total fermentable sugar could be obtained after enzymatic hydrolysis with the solid loading of 10 %, while the highest sugar recovery of 91.07 % was achieved when the solid loading was 2 % with the cellulase dose of 24 FPU/g substrate. Subsequently, the hydrolyzate was fermented by Clostridium acetobutylicum ATCC 824. The acetone–butanol–ethanol (ABE) production of the hydrolyzate was compared with the glucose, xylose and simulated hydrolyzate medium which have the same reducing sugar concentration. It was shown that 7.1 g/L butanol and 11.2 g/L ABE could be produced after 72 h fermentation for the hydrolyzate obtained from enzymatic hydrolysis with 6 % solid loading. This is comparable to the glucose and simulated hydrozate medium, and the overall ABE yield could reach 0.112 g/g raw corn stover.     

Sweet Sorghum Juice and Bagasse as Feedstocks for the Production of Optically Pure Lactic Acid by Native and Engineered <Emphasis Type="Italic">Bacillus coagulans</Emphasis> Strains

Sweet sorghum is a bioenergy crop that produces large amounts of soluble sugars in its stems (3–7 Mg ha^?1) and generates significant amounts of bagasse (15–20 Mg ha^?1) as a lignocellulosic feedstock. These sugars can be fermented not only to biofuels but also to bio-based chemicals. The market potential of the latter may be higher given the current prices of petroleum and natural gas. The yield and rate of production of optically pure d-(?)- and l-(+)-lactic acid as precursors for the biodegradable plastic polylactide was optimized for two thermotolerant Bacillus coagulans strains. Strain 36D1 fermented the sugars in unsterilized sweet sorghum juice at 50 °C to l-(+)-lactic acid (～150 g L^?1; productivity, 7.2 g L^?1 h^?1). B. coagulans strain QZ19-2 was used to ferment sorghum juice to d-(?)-lactic acid (～125 g L^?1; productivity, 5 g L^?1 h^?1). Carbohydrates in the sorghum bagasse were also fermented after pretreatment with 0.5 % phosphoric acid at 190 °C for 5 min. Simultaneous saccharification and co-fermentation of all the sugars (SScF) by B. coagulans resulted in a conversion of 80 % of available carbohydrates to optically pure lactic acid depending on the B. coagulans strain used as the microbial biocatalyst. Liquefaction of pretreated bagasse with cellulases before SScF (L + SScF) increased the productivity of lactic acid. These results show that B. coagulans is an effective biocatalyst for fermentation of all the sugars present in sweet sorghum juice and bagasse to optically pure lactic acid at high titer and productivity as feedstock for bio-based plastics.     

Enhanced citric acid production by a yeast <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> over-expressing a pyruvate carboxylase gene

In this study, after the expression of a pyruvate carboxylase gene (PYC) cloned from Meyerozyma guilliermondii in a marine-derived yeast Yarrowia lipolytica SWJ-1b, a transformant PG86 obtained had much higher PYC activity than Y. lipolytica SWJ-1b. At the same time, the PYC gene expression and citric acid (CA) production by the transformant PG86 were also greatly enhanced. When glucose concentration in the medium was 60.0 g L^?1, CA concentration formed by the transformant PG86 was 34.02 g L^?1, leading to a CA yield of 0.57 g g^?1 of glucose. During a 10-L fed-batch fermentation, the final concentration of CA was 101.0 ± 1.3 g L^?1, the yield was 0.89 g g^?1 of glucose, the productivity was 0.42 g L^?1 h^?1 and only 5.93 g L^?1 reducing sugar was left in the fermented medium within 240 h of the fed-batch fermentation. HPLC analysis showed that most of the fermentation products were CA.     

Yellow top (Physaria fendleri) presscake: A novel substrate for butanol production and reduction in environmental pollution

Yellow Top (Physaria fendleri) is a plant that belongs to the mustard family. This plant is used to produce seeds that are rich in hydroxy oil. After extraction of oil, the presscake is land filled. The seedcake is rich in polymeric sugars and can be used for various bioconversions. For the present case, the seedcake or presscake was hydrolyzed with dilute (0.50% [v/v]) H₂SO₄ and enzymes to release sugars including glucose, xylose, galactose, arabinose, and mannose. Then, the hydrolyzate was used to produce acetone–butanol–ethanol (ABE). Using 100 gL⁻¹ presscake (prior to pretreatment), 19.22 gL⁻¹ of ABE was successfully produced of which butanol was the major product. In this process, an ABE productivity of 0.48 gL⁻¹ h⁻¹ was obtained. These results are superior to glucose fermentation to produce ABE in which an ABE productivity of 0.42 gL⁻¹ h⁻¹ was obtained. Use of Yellow Top to produce butanol has the following advantages: (i) it is an economic feedstock and is expected to produce butanol economically; (ii) it avoids pollution concerns when not land filled; and (iii) rate of ABE production is not inhibited when fermented this substrate. It is suggested that the potential of this feedstock be further explored by optimizing process parameters for this valuable fermentation. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 35: e2767, 2019.     

CaCO<Subscript>3</Subscript> supplementation alleviates the inhibition of formic acid on acetone/butanol/ethanol fermentation by <Emphasis Type="Italic">Clostridium acetobutylicum</Emphasis>

Objective

To investigate the inhibiting effect of formic acid on acetone/butanol/ethanol (ABE) fermentation and explain the mechanism of the alleviation in the inhibiting effect under CaCO₃ supplementation condition.

Results

From the medium containing 50 g sugars l^?1 and 0.5 g formic acid l^?1, only 0.75 g ABE l^?1 was produced when pH was adjusted by KOH and fermentation ended prematurely before the transformation from acidogenesis to solventogenesis. In contrast, 11.4 g ABE l^?1 was produced when pH was adjusted by 4 g CaCO₃ l^?1. The beneficial effect can be ascribed to the buffering capacity of CaCO₃. Comparative analysis results showed that the undissociated formic acid concentration and acid production coupled with ATP and NADH was affected by the pH buffering capacity of CaCO₃. Four millimole undissociated formic acid was the threshold at which the transformation to solventogenesis occurred.

Conclusion

The inhibiting effect of formic acid on ABE fermentation can be alleviated by CaCO₃ supplementation due to its buffering capacity.

     

Exploring <Emphasis Type="Italic">in vitro</Emphasis> germplasm conservation options for sugarcane (<Emphasis Type="Italic">Saccharum</Emphasis> spp. hybrids) in South Africa

In vitro plantlets of sugarcane cultivar NCo310 were maintained in slow growth conditions at both 18 and 24°C and on four semi-solid media: SG1—Murashige and Skoog (MS) salts and vitamins with 20 g L^?1 sucrose, SG2—½ MS with 10 g L^?1 sucrose, SG3—MS with 20 g L^?1 sucrose and 1 mg L^?1 abscisic acid (ABA), and SG4—½ MS with 10 g L^?1 sucrose and 1 mg L^?1 ABA. After 8, 12, 24, 36, and 48 mo shoot multiplication rates were recorded, shoots were removed from storage and subcultured every 2 wk on SG1 with 0.015 mg L^?1 kinetin and 0.1 mg L^?1 benzyl aminopurine for 2 mo. At 18°C, all media supported storage for 48 mo with subculturing every 12 mo. Shoot multiplication post-retrieval was significantly higher on the SG2 medium compared with the non-stored control (362 ± 84 and 126 ± 26 shoots per recovered shoot after 2 mo, respectively). In addition, shoots could be maintained for 48 mo on SG2 medium with one subculture without compromising post-storage multiplication ability. At 24°C, storage on all four media supported recovery and multiplication of shoots for 8 mo and only SG2 medium facilitated survival for 12 mo. There was no advantage to incorporating ABA into the storage media, regardless of the temperature and storage time. Cryopreservation of cultivar NCo376 in vitro-derived shoot meristems using the V-cryo-plate method demonstrated that the sucrose concentration in the loading solution (0.8–1.8 M) had no significant effect on survival of the meristems, which ranged from 41.7 ± 4.8 to 69.4 ± 10%.     

Co-generation of ethanol and <Emphasis Type="SmallCaps">l</Emphasis>-lactic acid from corn stalk under a hybrid process

Background

Corn stover, as one important lignocellulosic material, has characteristics of low price, abundant output and easy availability. Using corn stover as carbon source in the fermentation of valuable organic chemicals contributes to reducing the negative environmental problems and the cost of production. In ethanol fermentation based on the hydrolysate of corn stover, the conversion rate of fermentable sugars is at a low level because the native S. cerevisiae does not utilize xylose. In order to increase the conversion rate of fermentable sugars deriving from corn stover, an effective and energy saving biochemical process was developed in this study and the residual xylose after ethanol fermentation was further converted to l-lactic acid.

Results

In the hybrid process based on the hydrolysate of corn stover, the ethanol concentration and productivity reached 50.50 g L^?1 and 1.84 g L^?1 h^?1, respectively, and the yield of ethanol was 0.46 g g^?1. The following fermentation of l-lactic acid provided a product titer of 21.50 g L^?1 with a productivity of 2.08 g L^?1 h^?1, and the yield of l-lactic acid was 0.76 g g^?1. By adopting a blank aeration before the inoculation of B. coagulans LA1507 and reducing the final cell density, the l-lactic acid titer and yield reached 24.25 g L^?1 and 0.86 g g^?1, respectively, with a productivity of 1.96 g L^?1 h^?1.

Conclusions

In this work, the air pumped into the fermentor was used as both the carrier gas for single-pass gas stripping of ethanol and the oxygen provider for the aerobic growth of B. coagulans LA1507. Ethanol was effectively separated from the fermentation broth, while the residual medium containing xylose was reused for l-lactic acid production. As an energy-saving and environmental-friendly process, it introduced a potential way to produce bioproducts under the concept of biorefinery, while making full use of the hydrolysate of corn stover.

     

Improving the production yield and productivity of 1,3-dihydroxyacetone from glycerol fermentation using <Emphasis Type="Italic">Gluconobacter oxydans</Emphasis> NL71 in a compressed oxygen supply-sealed and stirred tank reactor (COS-SSTR)

In this study, a compressed oxygen gas supply was connected to a sealed aerated stirred tank reactor (COS-SSTR) bio-system, leading to a high-oxygen pressure bioreactor used to improve the bio-transformative performance in the production of 1,3-dihydroxyacetone (DHA) from glycerol using Gluconobacter oxydans NL71. A concentration of 301.2 ± 8.2 g L^?1 DHA was obtained from glycerol after 32 h of fed-batch fermentation in the COS-SSTR system. The volumetric productivity for this process was 9.41 ± 0.23 g L^?1 h^?1, which is presently the highest obtained level of glycerol bioconversion into DHA. These results show that the application of this bioreactor would enable microbial production of DHA from glycerol at the industrial scale.     

Semi-industrial scale (30 m<Superscript>3</Superscript>) fed-batch fermentation for the production of <Emphasis Type="SmallCaps">d</Emphasis>-lactate by <Emphasis Type="Italic">Escherichia coli</Emphasis> strain HBUT-D15

d(?)-lactic acid is needed for manufacturing of stereo-complex poly-lactic acid polymer. Large scale d-lactic acid fermentation, however, has yet to be demonstrated. A genetically engineered Escherichia coli strain, HBUT-D, was adaptively evolved in a 15% calcium lactate medium for improved lactate tolerance. The resulting strain, HBUT-D15, was tested at a lab scale (7 L) by fed-batch fermentation with up to 200 g L^?1 of glucose, producing 184–191 g L^?1 of d-lactic acid, with a volumetric productivity of 4.38 g L^?1 h^?1, a yield of 92%, and an optical purity of 99.9%. The HBUT-D15 was then evaluated at a semi-industrial scale (30 m³) via fed-batch fermentation with up to 160 g L^?1 of glucose, producing 146–150 g L^?1 of d-lactic acid, with a volumetric productivity of 3.95–4.29 g L^?1 h^?1, a yield of 91–94%, and an optical purity of 99.8%. These results are comparable to that of current industrial scale l(+)-lactic acid fermentation.     

CITRIC ACID PRODUCTION BY Candida SPECIES GROWN ON A SOY-BASED CRUDE GLYCEROL

Citric acid was produced by five species of the yeast Candida after growth on a medium containing soy biodiesel-based crude glycerol. After growth on a medium containing 10 g L^?1 or 60 g L^?1 crude glycerol for 168 hr at 30°C, Candida parapsilosis ATCC 7330 and C. guilliermondii ATCC 9058 produced the highest citric acid levels. On 10 g L^?1 or 60 g L^?1 crude glycerol for 168 hr at 30°C, the citric acid level produced by C. parapsilosis ATCC 7330 was 1.8 g L^?1 or 11.3 g L^?1, respectively, while C. guilliermondii ATCC 9058 produced citric acid concentrations of 3.0 g L^?1 or 10.4 g L^?1, respectively. Biomass production by C. guilliermondii ATCC 9058 on 10 g L^?1 or 60 g L^?1 crude glycerol for 168 hr at 30°C was highest at 1.2 g L^?1 or 6.9 g L^?1, respectively. The citric acid yields observed for C. guilliermondii ATCC 9058 after growth on 10 g L^?1 or 60 g L^?1 crude glycerol (0.35 g g^?1 or 0.21 g g^?1, respectively) were generally higher than for the other Candida species tested. When similar crude glycerol concentrations were present in the culture medium, citric acid yields observed for some of the Candida species utilized in this study were about the same or higher compared to citric acid yields by Yarrowia lipolytica strains. Based on the findings, it appeared that C. guilliermondii ATCC 9058 was the most effective species utilized, with its citric acid production being similar to what has been observed when citric acid-producing strains of Y. lipolytica were grown on crude glycerol under batch conditions that could be of significance to biobased citric acid production.     

Biological CO<Subscript>2</Subscript> fixation using C<Emphasis Type="Italic">hlorella vulgaris</Emphasis> and its thermal characteristics through thermogravimetric analysis

The present research is focused on cultivation of microalgae strain Chlorella vulgaris for bio-fixation of CO₂ coupled with biomass production. In this regard, a single semi-batch vertical tubular photobioreactor and four similar photobioreactors in series have been employed. The concentration of CO₂ in the feed stream was varied from 2 to 12 % (v/v) by adjusting CO₂ to air ratio. The amount of CO₂ capture and algae growth were monitored by measuring decrease of CO₂ concentration in the gas phase, microalgal cell density, and algal biomass production rate. The results show that 4 % CO₂ gives maximum amount of biomass (0.9 g L^?1) and productivity (0.118 g L^?1 day^?1) of C. vulgaris in a single reactor. In series reactors, average productivity per reactor found to be 0.078 g L^?1 day^?1. The maximum CO₂ uptake for single reactor also found with 4 % CO_2, and it is around 0.2 g L^?1 day^?1. In series reactors, average CO₂ uptake is 0.13 g L^?1 day^?1 per reactor. TOC analysis shows that the carbon content of the produced biomass is around 40.67 % of total weight. The thermochemical characteristics of the cultivated C. vulgaris samples were analyzed in the presence of air. All samples burn above 200 °C and the combustion rate become faster at around 600 °C. Almost 98 wt% of the produced biomass is combustible in this range.     

Kinetics of growth and ethanol formation from a mix of glucose/xylose substrate by Kluyveromyces marxianus UFV-3

The fermentation of both glucose and xylose is important to maximize ethanol yield from renewable biomass feedstocks. In this article, we analyze growth, sugar consumption, and ethanol formation by the yeast Kluyveromyces marxianus UFV-3 using various glucose and xylose concentrations and also under conditions of reduced respiratory activity. In almost all the conditions analyzed, glucose repressed xylose assimilation and xylose consumption began after glucose had been exhausted. A remarkable difference was observed when mixtures of 5 g L^?1 glucose/20 g L^?1 xylose and 20 g L^?1 glucose/20 g L^?1 xylose were used. In the former, the xylose consumption began immediately after the glucose depletion. Indeed, there was no striking diauxic phase, as observed in the latter condition, in which there was an interval of 30 h between glucose depletion and the beginning of xylose consumption. Ethanol production was always higher in a mixture of glucose and xylose than in glucose alone. The highest ethanol concentration (8.65 g L^?1) and cell mass concentration (4.42 g L^?1) were achieved after 8 and 74 h, respectively, in a mixture of 20 g L^?1 glucose/20 g L^?1 xylose. When inhibitors of respiration were added to the medium, glucose repression of xylose consumption was alleviated completely and K. marxianus was able to consume xylose and glucose simultaneously.