Simple structural differences between coding and noncoding DNA

Background

The study of large-scale genome structure has revealed patterns suggesting the influence of evolutionary constraints on genome evolution. However, the results of these studies can be difficult to interpret due to the conceptual complexity of the analyses. This makes it difficult to understand how observed statistical patterns relate to the physical distribution of genomic elements. We use a simpler and more intuitive approach to evaluate patterns of genome structure.

Methodology/Principal Findings

We used randomization tests based on Morisita''s Index of aggregation to examine average differences in the distribution of purines and pyrimidines among coding and noncoding regions of 261 chromosomes from 223 microbial genomes representing 21 phylum level groups. Purines and pyrimidines were aggregated in the noncoding DNA of 86% of genomes, but were only aggregated in the coding regions of 52% of genomes. Coding and noncoding DNA differed in aggregation in 94% of genomes. Noncoding regions were more aggregated than coding regions in 91% of these genomes. Genome length appears to limit aggregation, but chromosome length does not. Chromosomes from the same species are similarly aggregated despite substantial differences in length. Aggregation differed among taxonomic groups, revealing support for a previously reported pattern relating genome structure to environmental conditions.

Conclusions/Significance

Our approach revealed several patterns of genome structure among different types of DNA, different chromosomes of the same genome, and among different taxonomic groups. Similarity in aggregation among chromosomes of varying length from the same genome suggests that individual chromosome structure has not evolved independently of the general constraints on genome structure as a whole. These patterns were detected using simple and readily interpretable methods commonly used in other areas of biology.     

Free energy differences between enzyme bound states

A theory is presented that describes the free energy difference between the enzyme-substrate (ES) and enzyme-product (EP) complexes that is expected in enzymes optimized for catalytic efficiency. In such enzymes, the free energy drop between ES and EP complexes reflects a portion of the chemical potential difference between substrates and products outside the active site under physiological conditions. Qualitative and quantitative predictions of the model are discussed and compared with experimental data. The controversy over the kinetically optimal free energy profile for an enzymatic reaction operating under constraints set forward by Albery & Knowles (1976) is resolved.     

Manganese and iron superoxide dismutases are structural homologs

The crystal structure of a tetrameric manganese superoxide dismutase from a thermophilic bacterium, Thermus thermophilus HB8, has been determined at 4.4-A resolution by local averaging of electron density maps calculated by isomorphous replacement. The spatial arrangement of the principal secondary structural features of iron superoxide dismutase is conserved in manganese dismutase. The structural homology is displayed by orienting the polypeptide chain of Escherichia coli Fe dismutase in the electron density map of Mn dismutase. Densities corresponding to bound Mn3+ occur at locations equivalent to the Fe3+ positions in iron dismutase, indicating one metal binding site per chain, or four sites per tetramer. The Mn tetramer, with 222 symmetry, is approximately rectangular in shape and appears to be constructed with only two unique interfaces. One set of interchain contacts closely resembles the dimer interface of Fe dismutase, but the other interface utilizes an inserted polypeptide segment that has no equivalent in Fe dismutase.     

Functional and structural differences between skinned and intact muscle preparations

Myofilaments and their associated proteins, which together constitute the sarcomeres, provide the molecular-level basis for contractile function in all muscle types. In intact muscle, sarcomere-level contraction is strongly coupled to other cellular subsystems, in particular the sarcolemmal membrane. Skinned muscle preparations (where the sarcolemma has been removed or permeabilized) are an experimental system designed to probe contractile mechanisms independently of the sarcolemma. Over the last few decades, experiments performed using permeabilized preparations have been invaluable for clarifying the understanding of contractile mechanisms in both skeletal and cardiac muscle. Today, the technique is increasingly harnessed for preclinical and/or pharmacological studies that seek to understand how interventions will impact intact muscle contraction. In this context, intrinsic functional and structural differences between skinned and intact muscle pose a major interpretational challenge. This review first surveys measurements that highlight these differences in terms of the sarcomere structure, passive and active tension generation, and calcium dependence. We then highlight the main practical challenges and caveats faced by experimentalists seeking to emulate the physiological conditions of intact muscle. Gaining an awareness of these complexities is essential for putting experiments in due perspective.

IntroductionIn striated muscle, force is generated by sarcomeres located within myocytes (Bers, 2001, 2002). The sarcomere is located within the selectively permeable cell membrane, which supports intracellular ionic homeostasis. Within this highly regulated space, sarcomere force generation is activated by dynamic changes in cytosolic Ca²⁺. The sarcomeric protein troponin C (TnC) binds to Ca²⁺, which prompts the formation of myosin cross-bridges between the sarcomere thick (myosin) and thin (actin) filaments. These myofilaments are arranged in a regular lattice oriented along the muscle fiber direction and form the main structural basis of myocyte contraction. The contraction process is regulated by many other intracellular molecules and ions, in particular Mg²⁺ and H⁺, as well as by cellular and sarcomeric morphologies.To identify the ionic and molecular mechanisms that regulate the sarcomere, it is necessary to control the chemical environment it is exposed to. The biochemistry of the sarcomere proteins can be studied using in vitro biochemistry assays. However, these fail to account for the regular structure of the sarcomere, which is important for both biochemistry and function. Alternatively, the sarcomeres can be accessed by skinning the muscle, i.e., removing the sarcolemma membrane (or making it permeable to compounds and ions), while preserving sarcomere functionality (Curtin et al., 2015). Exposing the sarcomeres to tailored ionic conditions provides a means to observe and control molecular behavior in a setting that more closely resembles native structures. After skinning, the sarcomere system is effectively isolated from the other cellular subsystems (except in some skeletal muscle experiments that remove the sarcolemma while preserving intracellular organelles and structures; Donaldson, 1985; Fill and Best, 1988; Posterino et al., 2000). This facilitates the study of contraction and its regulation separately from the sarcolemma. The central assumption of skinned muscle experiments is that the response of the sarcomeres to changes in the natural cytosol can be reproduced artificially and controllably through analogous changes in the bathing solution.In skinning protocols (typically used with skeletal muscle) where the SR is preserved, applying caffeine liberates the intracellular Ca²⁺ reserves to stimulate contraction (Donaldson, 1985). In cases where the T tubules are preserved in the skinning process, ionic substitution in the bathing solution may induce T-tubule membrane depolarization and hence Ca²⁺ release from the SR (Fill and Best, 1988). An alternative approach to releasing SR calcium is by electric-field stimulation, with the electric field applied transversely relative to the fiber direction (Posterino et al., 2000).The principal readouts of skinned-muscle experiments are contraction kinetics, adenosine triphosphatase (ATPase) activity, and generated force. Their value therefore rests on the premise that the structural integrity of the sarcomeres is preserved. Under this condition, skinned muscle may be viewed as an intermediary experimental system, straddling intact muscle and in vitro molecular experiments.Skinned preparations allow the probing of muscle behavior beyond the current reach of experiments on intact systems. In experiments where contraction is elicited by controlling the bath [Ca²⁺], the influence of “cytosolic” conditions on Ca²⁺ sensitivity, in the steady-state, is typically presented in terms of Hill-type force-[Ca²⁺] relationships, or “F-pCa,” where pCa ≡ − log₁₀[Ca²⁺]/(mol/liter). Other intracellular molecular structures that fulfill structural and mechanical roles (e.g., titin [Cazorla et al., 2001; Fukuda and Granzier, 2005; Fukuda et al., 2005; Li et al., 2016; Tonino et al., 2017] or the cytoskeleton [Roos and Brady, 1989]) can also be investigated. The controlled progression of the system from one equilibrium state to another has helped to reveal, for example, hysteresis in F-pCa, which may potentially fulfill a physiological role but would be difficult to identify in the dynamic natural system (Bers, 2001; Harrison et al., 1988). Dynamic mechanical experiments also yield insight into myofilament kinetics (Breithaupt et al., 2019; Palmer et al., 2020; Stelzer et al., 2006; Terui et al., 2010). In some (mechanical) skinning methods that preserve the T tubules, further details of the excitation–contraction coupling become experimentally accessible (Fill and Best, 1988; Posterino et al., 2000). The ability to perform protein-exchange manipulations (e.g., cardiac versus skeletal TnC; Babu et al., 1988; Gulati and Babu, 1989), to include fluorescent proteins (e.g., troponin; Brenner et al., 1999), and to perform time-resolved dynamics measurements through the flash photolysis of caged compounds (ATP [Goldman et al., 1982, 1984], inorganic phosphate [Araujo and Walker, 1996; Dantzig et al., 1992; Millar and Homsher, 1990; Tesi et al., 2000], and Ca²⁺ chelators [Luo et al., 2002; Wahr et al., 1998]) provide additional handles for probing molecular mechanisms. Overall, much of our understanding of striated muscle generally and cytosolic conditions (temperature, pH, etc.) is derived from skinned-muscle experiments (Bers, 2001).Historically, skinning has been performed in a wide array of animal species and striated muscle systems, ranging from single cells to multicellular fibers of cardiac, skeletal, and smooth muscle. Various skinning techniques have been proposed. In “mechanical” skinning, the sarcolemma is effectively peeled off (entirely or partially; Cassens et al., 1986; Endo, 1977; Trube, 1978) by microdissection (Azimi et al., 2020; Donaldson, 1985; Fabiato, 1985b; Fabiato and Fabiato, 1975, 1977, 1978a, 1978b; Fill and Best, 1988; Godt, 1974; Godt and Maughan, 1977; Jewell, 1977; Lamb and Stephenson, 2018; Matsubara and Elliott, 1972; Moisescu, 1976; Rebbeck et al., 2020), while preserving the structural integrity and function of the T tubules and the SR (Lamb and Stephenson, 1990; Posterino et al., 2000; Stephenson, 1981). However, the technique is difficult and no longer used routinely. In contrast, “chemical” skinning involves dissolving or permeabilizing the membrane by applying a chemical agent. The most common agent is Triton X-100 (Solaro et al., 1971), but alternatives include Brij (Hibberd and Jewell, 1982), lubrol (Scheld et al., 1989), glycerol, and saponin (Edes et al., 1995; Endo and Iino, 1980; Gwathmey and Hajjar, 1990; Launikonis and Stephenson, 1997; Patel et al., 2001). Chemical skinning is particularly appropriate for multicellular tissue preparations. Controlling the precise protocol and chemical agent reportedly allows the selective dissolution of the sarcolemma membrane while leaving intracellular organelles (mitochondria and SR) intact. Nonetheless, treatment with (typically 1%) Triton X-100 frees the myofibrils of contamination by mitochondrial, sarcolemmal, and SR membranes while preserving ATPase activity and sensitivity to Ca²⁺ (Solaro et al., 1971). This straightforwardness makes Triton X-100 demembranation the predominantly used technique today. Other reported skinning approaches use propionate (Reuben et al., 1971) or the Ca²⁺ chelators EGTA or EDTA (Thomas, 1960; Winegard, 1971; Miller, 1979), but the uncertainty in the underlying mechanisms has undermined the reliability of these methods (Miller, 1979). For completeness, we also mention a less used “freeze drying” approach that arguably preserves the protein content of the fibers better than chemical skinning (De Beer et al., 1992; Schiereck et al., 1993; Stienen et al., 1983).Although, for many years, skinned muscle experiments have served as an invaluable method for investigating fundamental physiology, they are increasingly inspiring more ambitious practical applications. At a practical level, live human cells are inevitably a highly scarce resource, with facilities for collecting, storing, and measuring samples often being displaced both geographically and temporally. These issues are more realistically resolved with skinned cells, which can be preserved frozen for several months (Mosqueira et al., 2019). The development of new sarcomere drugs, including omecamtiv mecarbil and mavacamten, demonstrate that the sarcomere is a viable drug target (Tsukamoto, 2019). Similarly, Ca²⁺-sensitizing drugs (which act by increasing either the sensitivity to [Ca²⁺] or the magnitude of the generated force) such as levosimendan (Edes et al., 1995), pimobendan (Fitton and Brogden, 1994; Scheld et al., 1989), sulmazole (Solaro and Rüegg, 1982), isomazole (Lues et al., 1988), and EMD-57033 (Gross et al., 1993; Lee and Allen, 1997) have all been assessed using measurements on skinned fibers. Identifying further novel sarcomere modulator compounds requires large high-throughput screening, which is unrealistic using intact muscle.There is also a growing appetite for exploiting the quantitative value of skinned muscle experiments for more direct clinical applications, such as guiding patient-specific therapies. Much of this ambition relies on the integrative power of computational models to simulate human heart mechanics based on individual patients’ data, linking sub-cellular mechanisms with systemic behavior (Niederer et al., 2019a, 2019b). Building upon basic understanding of muscle behavior, recent developments in biomedical engineering extrapolate physiological processes at the cellular and tissue levels to predict global whole-heart function. As this field continues to grow in maturity, and as model predictions allow more meaningful comparisons with clinical data, efforts are increasingly focusing on quantitatively elucidating the interdependence between cellular behavior, tissue properties, and the anatomy. The quantitative accuracy of the subsystems at all these levels therefore becomes paramount.In both of these evolving applications, the relevance and value of skinned-muscle experiments hinges on their ability to reliably emulate the intact system (Land et al., 2017; Margara et al., 2021; Mijailovich et al., 2021). Skinned-muscle experiments conducted over the past decades confirm the fidelity, in many respects, of these preparations as valid experimental models. However, they also highlight caveats and significant interpretational challenges. Gaining an awareness of these issues is becoming all the more essential to avoid misinterpretations that may have practical consequences. This review therefore aims to highlight these challenges, to help users of skinned-based measurements put them in an appropriate perspective.The present review is structured as follows. We first compare measurements of the principal physiological properties of skinned and intact muscle, highlighting similarities and discrepancies. We focus primarily on chemical skinning, and in particular Triton X-100 (the predominantly used chemical agent). We then describe practical challenges involved in conducting experiments, insofar as they impact on measurement outcomes. We conclude with a summary of recommendations and main caveats.Comparing skinned and intact muscleSkinned muscle experiments aim to reveal and controllably reproduce features of the physiological function of sarcomeres. However, notable discrepancies arise between skinned- and intact-muscle measurements of basic muscle properties that govern overall muscle function. To establish these differences rigorously at the single-cell level encounters significant methodological challenges. Although it might seem obvious that this would require doing measurements systematically on both preparation types in tandem, many early experiments were done predominantly on skinned rather than on intact cells (King et al., 2011). This stems largely from the specific challenges of noninjurious cell attachment and performing small-force measurement on intact single cells (Brady, 1991). More recently, technical developments (e.g., involving the use of flexible carbon fibers to hold the cells at opposite ends; Iribe et al., 2007; Le Guennec et al., 1990; Yasuda et al., 2001) have made these measurements more practicable. Despite these advances, however, only a fraction of studies in the literature have systematically made direct comparisons between skinned and intact systems taken from the same species under optimally similar conditions (see the selection listed in

Molecular structural differences between type-2-diabetic and healthy glycogen

Glycogen is a highly branched glucose polymer functioning as a glucose buffer in animals. Multiple-detector size exclusion chromatography and fluorophore-assisted carbohydrate electrophoresis were used to examine the structure of undegraded native liver glycogen (both whole and enzymatically debranched) as a function of molecular size, isolated from the livers of healthy and db/db mice (the latter a type 2 diabetic model). Both the fully branched and debranched levels of glycogen structure showed fundamental differences between glycogen from healthy and db/db mice. Healthy glycogen had a greater population of large particles, with more α particles (tightly linked assemblages of smaller β particles) than glycogen from db/db mice. These structural differences suggest a new understanding of type 2 diabetes.     

The structural differences between bovine lens alphaA- and alphaB-crystallin.

Lens alphaA- and alphaB-crystallin have been reported to act differently in their protection against nonthermal destabilization of proteins. The nature of this difference, however, is not completely understood. Therefore we used a combination of thermally and solvent-induced structural changes to investigate the difference in the secondary, tertiary and quaternary structures of alphaA- and alphaB-crystallin. We demonstrate the relationship between the changes in the tertiary and quaternary structures for both polypeptides. Far-ultraviolet circular dichroism revealed that the secondary structure of alphaB-crystallin is more stable than that of alphaA-crystallin, and the temperature-induced secondary structure changes of both polypeptides are partially reversible. Tryptophan fluorescence revealed two distinct transitions for both alphaA- and alphaB-crystallin. Compared to alphaB-crystallin, both transitions of alphaA-crystallin occurred at higher temperature. The changes in the hydrophobicity are accompanied by changes in the quaternary structure and are biphasic, as shown by bis-1-anilino-8-naphthalenesulfonate fluorescence and sedimentation velocity. These phenomena explain the difference in the chaperone capacity of alphaA- and alphaB-crystallin carried out at different temperatures. The quaternary structure of alpha-crystallin is more stable than that of alphaA- and alphaB-crystallin. The latter has a strong tendency to dissociate under thermal or solvent destabilization. This phenomenon is related to the difference in subunit organization of alphaA- and alphaB-crystallin where both hydrophobic and ionic interactions are involved. We find that an important subunit rearrangement of alphaA-crystallin takes place once the molecule is destabilized. This subunit rearrangement is a requisite phenomenon for maintaining alpha-crystallin in its globular form and as a stable complex. On the base of our results, we suggest a four-state model describing the folding and dissociation of alphaA- and alphaB-crystallin better than a three-state model [Sun et al. (1999) J. Biol. Chem. 274, 34067-34071].     

Microfloral contamination and hydrolytic enzyme differences between monsooned and non-monsooned coffees

AIMS: To analyse and compare, for the first time, fungal and bacterial populations and hydrolytic enzyme production in four monsooned and non-monsooned Arabica and Robusta coffee types. METHODS AND RESULTS: Overall, using serial dilution, the populations of bacteria (approximately 10(8) cfu g(-1)) were highest in monsooned coffees of both varieties. Fungal populations were lower (10(5) cfu g(-1)) and found predominantly on monsooned coffee beans. The major fungal species were Aspergillus terreus, A. restrictus and A. ochraceus. Of 19 semi-quantitative enzymes analysed, significantly higher concentrations of 2-naphthyl-butyrate, caprylate and 2-naphthyl-D-galactopyranosidase were present in Arabica monsooned coffee. CONCLUSIONS: The results suggest that speciality monsooned coffee has markedly different microbial and physiological characteristics from normally produced green coffees. SIGNIFICANCE AND IMPACT OF THE STUDY: Monsooned coffee may have a higher contamination with spoilage moulds, especially mycotoxigenic species.     

Discrimination between distant homologs and structural analogs: lessons from manually constructed, reliable data sets

A natural way to study protein sequence, structure, and function is to put them in the context of evolution. Homologs inherit similarities from their common ancestor, while analogs converge to similar structures due to a limited number of energetically favorable ways to pack secondary structural elements. Using novel strategies, we previously assembled two reliable databases of homologs and analogs. In this study, we compare these two data sets and develop a support vector machine (SVM)-based classifier to discriminate between homologs and analogs. The classifier uses a number of well-known similarity scores. We observe that although both structure scores and sequence scores contribute to SVM performance, profile sequence scores computed based on structural alignments are the best discriminators between remote homologs and structural analogs. We apply our classifier to a representative set from the expert-constructed database, Structural Classification of Proteins (SCOP). The SVM classifier recovers 76% of the remote homologs defined as domains in the same SCOP superfamily but from different families. More importantly, we also detect and discuss interesting homologous relationships between SCOP domains from different superfamilies, folds, and even classes.     

Sequence, structural and evolutionary relationships between class 2 aminoacyl-tRNA synthetases

Class 2 aminoacyl-tRNA synthetases, which include the enzymes for alanine, aspartic acid, asparagine, glycine, histidine, lysine, phenylalanine, proline, serine and threonine, are characterised by three distinct sequence motifs 1,2 and 3 (reference 1). The structural and evolutionary relatedness of these ten enzymes are examined using alignments of primary sequences from prokaryotic and eukaryotic sources and the known three dimensional structure of seryl-tRNA synthetase from E. coli. It is shown that motif 1 forms part of the dimer interface of seryl-tRNA synthetase and motifs 2 and 3 part of the putative active site. It is further shown that the seven alpha 2 dimeric synthetases can be subdivided into class 2a (proline, threonine, histidine and serine) and class 2b (aspartic acid, asparagine and lysine), each subclass sharing several important characteristic sequence motifs in addition to those characteristic of class 2 enzymes in general. The alpha 2 beta 2 tetrameric enzymes (for glycine and phenylalanine) show certain special features in common as well as some of the class 2b motifs. In the alanyl-tRNA synthetase only motif 3 and possibly motif 2 can be identified. The sequence alignments suggest that the catalytic domain of other class 2 synthetases should resemble the antiparallel domain found in seryl-tRNA synthetase. Predictions are made about the sequence location of certain important helices and beta-strands in this domain as well as suggestions concerning which residues are important in ATP and amino acid binding. Strong homologies are found in the N-terminal extensions of class 2b synthetases and in the C-terminal extensions of class 2a synthetases suggesting that these putative tRNA binding domains have been added at a later stage in evolution to the catalytic domain.     

SUBCUR: Visualization of structural differences between DNA duplexes

A computer program, SUBCUR, is described which permits analysis and rapid identification of geometrical differences and patterns of variance between two DNA duplexes. The program is compatible with the CURVES 3.1 package² and allows graphical visualization of the structural differences. Examples are provided which illustrate the applicability of the program in analyzing the different backbone conformations of two helices and the different curvatures of two helices.     

FTIR reveals structural differences between native beta-sheet proteins and amyloid fibrils

The presence of beta-sheets in the core of amyloid fibrils raised questions as to whether or not beta-sheet-containing proteins, such as transthyretin, are predisposed to form such fibrils. However, we show here that the molecular structure of amyloid fibrils differs more generally from the beta-sheets in native proteins. This difference is evident from the amide I region of the infrared spectrum and relates to the distribution of the phi/psi dihedral angles within the Ramachandran plot, the average number of strands per sheet, and possibly, the beta-sheet twist. These data imply that amyloid fibril formation from native beta-sheet proteins can involve a substantial structural reorganization.     

Anti-mouse GPI-PLD antisera highlight structural differences between murine and bovine GPI-PLDs

Despite its well characterised biochemistry, the physiological role of glycosylphosphatidylinositol-specific phospholipase D (GPI-PLD) is unknown. Most of the previous studies investigating the distribution of GPI-PLD have focused on the human and bovine forms of the enzyme. Studies on mouse GPI-PLD are rare, partly due to the lack of a specific anti-mouse GPI-PLD antibody, but also due to the apparent low reactivity of existing antibodies to rodent GPI-PLDs. Here we describe the isolation of a mouse liver cDNA, the construction and expression of a recombinant enzyme and the generation of an affinity-purified rabbit anti-mouse GPI-PLD antiserum. The antibody shows good reactivity to partially purified murine and purified bovine GPI-PLD. In contrast, a rat anti-bovine GPI-PLD antibody shows no reactivity with the mouse enzyme and the two antibodies recognise different proteolytic fragments of the bovine enzyme. Comparison between the rodent, bovine and human enzymes indicates that small changes in the amino acid sequence of a short peptide in the mouse and bovine GPI-PLDs may contribute to the different reactivities of the two antisera. We discuss the implications of these results and stress the importance of antibody selection while investigating GPI-PLD in the mouse.     

Sequence homologies between guanylyl cyclases and structural analogies to other signal-transducing proteins

The cyclic GMP-forming enzyme guanylyl cyclase exists in cytosolic and in membrane-bound forms differing in structure and regulations. Determination of the primary structures of the guanylyl cyclases revealed that the cytosolic enzyme form consists of two similar subunits and that membrane-bound guanylyl cyclases represent enzyme forms in which the catalytic part is located in an intracellular, C-terminal domain and is regulated by an extracelluar, N-terminal receptor domain. A domain of 250 amino acids conserved in all guanylyl cyclases appears to be required for the formation of cyclic nucleotide, as this homologous domain is also found in the cytosolic regions of the adenylyl cyclase. The general structures of guanylyl cyclases shows similarities with other signal transducing enzymes such as protein-tyrosine phosphatases and protein-tyrosine kinases. which also exist in cytosolic and receptor-linked forms.     

Spectral differences between rhodanese catalytic intermediates unrelated to enzyme conformation

Circular dichroism (CD) spectra and UV absorption spectra of two obligatory intermediates in rhodanese catalysis were compared. A broad CD band between 250 and 287 nm increased in a manner stoichiometrically related to the content of enzyme-bound persulfide. Titration of a sample of sulfur-substituted rhodanese (ES) with either cyanide or sulfite gave a stoichiometry that is consistent with one persulfide/molecule of rhodanese (Mr = 33,000). This result agrees with that determined by x-ray crystallography and a method based on quenching of intrinsic fluorescence. Cyanolysis of the persulfide in ES is accompanied by a decrease of UV absorption in the region between 250 and 300 nm. Cyanide titrations followed by the change in absorbance at 263, 272, and 292 nm gave the expected stoichiometry. The magnitude of the difference between the far UV-CD spectra of E and ES found here is smaller than reported previously. This variability suggests that the differences in the secondary structure of these intermediates may not be obligatorily related to the cyanolysis of the persulfide. This view is compatible with recent evidence which suggested that E and ES may be made different by structural relaxation events that occur outside of the catalytic cycle. Furthermore, the methods developed here will be useful in studies on the stability of the catalytic persulfide that has been suggested to be central in the mechanism of several enzymes important in sulfur metabolism.     

Sequence fingerprint and structural analysis of the SCOR enzyme A3DFK9 from Clostridium thermocellum

We have identified a highly conserved fingerprint of 40 residues in the TGYK subfamily of the short‐chain oxidoreductase enzymes. The TGYK subfamily is defined by the presence of an N‐terminal TGxxxGxG motif and a catalytic YxxxK motif. This subfamily contains more than 12,000 members, with individual members displaying unique substrate specificities. The 40 fingerprint residues are critical to catalysis, cofactor binding, protein folding, and oligomerization but are substrate independent. Their conservation provides critical insight into evolution of the folding and function of TGYK enzymes. Substrate specificity is determined by distinct combinations of residues in three flexible loops that make up the substrate‐binding pocket. Here, we report the structure determinations of the TGYK enzyme A3DFK9 from Clostridium thermocellum in its apo form and with bound NAD⁺ cofactor. The function of this protein is unknown, but our analysis of the substrate‐binding loops putatively identifies A3DFK9 as a carbohydrate or polyalcohol metabolizing enzyme. C. thermocellum has potential commercial applications because of its ability to convert biomaterial into ethanol. A3DFK9 contains 31 of the 40 TGYK subfamily fingerprint residues. The most significant variations are the substitution of a cysteine (Cys84) for a highly conserved glycine within a characteristic VNNAG motif, and the substitution of a glycine (Gly106) for a highly conserved asparagine residue at a helical kink. Both of these variations occur at positions typically participating in the formation of a catalytically important proton transfer network. An alternate means of stabilizing this proton wire was observed in the A3DFK9 crystal structures. Proteins 2010. © 2009 Wiley‐Liss, Inc.     

Mapping structural differences between 30S ribosomal subunit assembly intermediates

Under appropriate conditions, functional Escherichia coli 30S ribosomal subunits assemble in vitro from purified components. However, at low temperatures, assembly stalls, producing an intermediate (RI) that sediments at 21S and is composed of 16S ribosomal RNA (rRNA) and a subset of ribosomal proteins (r-proteins). Incubation of RI at elevated temperatures produces a particle, RI*, of similar composition but different sedimentation coefficient (26S). Once formed, RI* rapidly associates with the remaining r-proteins to produce mature 30S subunits. To understand the nature of this transition from RI to RI*, changes in the reactivity of 16S rRNA between these two states were monitored by chemical modification and primer extension analysis. Evaluation of this data using structural and biochemical information reveals that many changes are r-protein-dependent and some are clustered in functional regions, suggesting that this transition is an important step in functional 30S subunit formation.     

Sequence homology between the structural proteins of Kilham rat virus.

The capsid proteins of the autonomous parvovirus Kilham rat virus were purified and analyzed for peptide composition. Partial proteolysis mapping and two-dimensional thin-layer chromatography of tryptic peptide digests revealed extensive amino acid sequence homology between the two major Kilham rat virus capsid proteins.     

Development-dependent expression of isozymogens of monkey pepsinogens and structural differences between them

The developmental changes in the expression of monkey pepsinogens and structural differences between the polypeptides were investigated. Monkey pepsinogens included five different components, namely, pepsinogens A-(1-4) and progastricsin. Their respective relative levels and specific activities changed significantly during development. The sequential expression of genes for type-A pepsinogens was particularly noteworthy. Pepsinogen A-3 was the major zymogen at the newborn stage, accounting for nearly half of the total pepsinogens at this stage. Pepsinogen A-2 became predominant at the 4-month stage, and pepsinogen A-1 predominated at the juvenile and adult stages. Enzymatic properties of pepsinogens A-1, A-2 and A-3 were similar but not identical to those of pepsinogen A-4 and progastricsin, in particular with respect to the activation processes. Each pepsin digested various protein substrates but some differences in specificity were evident. cDNA clones for five pepsinogens were isolated, and the nucleotide sequences were determined. Each cDNA contained leader, pro, and pepsin regions that encoded 15, 47, and 326 amino acid residues, respectively, with the exception of the cDNA for progastricsin in which the pro and pepsin regions encoded 43 and 329 amino acid residues, respectively. Type-A pepsinogens exhibited a high degree of similarity, with over 96% of bases in the nucleotide sequences of the protein-coding regions being identical. Northern analysis revealed that the level of expression of genes for type-A pepsinogens and for progastricsin was significant at the fetal stage and increased with development.