Utilization of -xylose as carbon source for production of bacterial cellulose

Utilization of -xylose as carbon source for production of bacterial cellulose was studied. Seventeen strains of acetic acid bacteria were screened for their cellulose productivity in -glucose, -xylose, and -xylose/ -xylulose mixed media, respectively. -Xylose was not well metabolized by any bacterial strains that exhibited high cellulose production in -glucose medium. Consequently, bacterial cellulose production in -xylose medium was unsuccessful. -Xylose, however, became utilizable substrate for bacterial strains if xylose-isomerase was added to the medium. Acetobacter xylinus IFO 15606 was the best cellulose producer in -xylose/ -xylulose mixed medium, so cultural conditions were studied for enhanced cellulose production. With pH controlled, the strain could produce cellulose at a yield exceeding 0.3 g per 100 ml of -xylose/ -xylulose mixed medium, which was comparable to the yields in -glucose medium by excellent producers in the literature.     

Influence of different carbon sources on bacterial cellulose production by Gluconacetobacter xylinus strain ATCC 53524

Aims:  To determine the effect of carbon sources on cellulose produced by Gluconacetobacter xylinus strain ATCC 53524, and to characterize the purity and structural features of the cellulose produced.
Methods and Results:  Modified Hestrin Schramm medium containing the carbon sources mannitol, glucose, glycerol, fructose, sucrose or galactose were inoculated with Ga . xylinus strain ATCC 53524. Plate counts indicated that all carbon sources supported growth of the strain. Sucrose and glycerol gave the highest cellulose yields of 3·83 and 3·75 g l⁻¹ respectively after 96 h fermentation, primarily due to a surge in cellulose production in the last 12 h. Mannitol, fructose or glucose resulted in consistent rates of cellulose production and yields of >2·5 g l⁻¹. Solid state ¹³C CP/MAS NMR revealed that irrespective of the carbon source, the cellulose produced by ATCC 53524 was pure and highly crystalline. Scanning electron micrographs illustrated the densely packed network of cellulose fibres within the pellicles and that the different carbon sources did not markedly alter the micro-architecture of the resulting cellulose pellicles.
Conclusions:  The production rate of bacterial cellulose by Ga . xylinus (ATCC 53524) was influenced by different carbon sources, but the product formed was indistinguishable in molecular and microscopic features.
Significance and Impact of the Study:  Our studies for the first time examined the influence of different carbon sources on the rate of cellulose production by Ga . xylinus ATCC 53524, and the molecular and microscopic features of the cellulose produced.     

Macrofauna regulate heterotrophic bacterial carbon and nitrogen incorporation in low-oxygen sediments

Oxygen minimum zones (OMZs) currently impinge upon >1 million km² of sea floor and are predicted to expand with climate change. We investigated how changes in oxygen availability, macrofaunal biomass and retention of labile organic matter (OM) regulate heterotrophic bacterial C and N incorporation in the sediments of the OMZ-impacted Indian continental margin (540–1100 m; [O₂]=0.35–15 μmol l⁻¹). In situ pulse-chase experiments traced ¹³C:¹⁵N-labelled phytodetritus into bulk sediment OM and hydrolysable amino acids, including the bacterial biomarker 𝒟-alanine. Where oxygen availability was lowest ([O₂]=0.35 μmol l⁻¹), metazoan macrofauna were absent and bacteria assimilated 30–90% of the labelled phytodetritus within the sediment. At higher oxygen levels ([O₂]=2–15 μmol l⁻¹) the macrofaunal presence and lower phytodetritus retention with the sediment occur concomitantly, and bacterial phytodetrital incorporation was reduced and retarded. Bacterial C and N incorporation exhibited a significant negative relationship with macrofaunal biomass across the OMZ. We hypothesise that fauna–bacterial interactions significantly influence OM recycling in low-oxygen sediments and need to be considered when assessing the consequences of global change on biogeochemical cycles.     

A mechanically strong, flexible and conductive film based on bacterial cellulose/graphene nanocomposite

A highly flexible nanocomposite film of bacterial cellulose (BC) and graphene oxide (GO) with a layered structure was presented using the vacuum-assisted self-assembly technique. Microscopic and X-ray diffraction measurements demonstrated that the GO nanosheets were uniformly dispersed in the BC matrix. The interactions between BC and GO were studied by Fourier transformation infrared spectroscopy. Compared with pristine BC, the integration of 5 wt% GO resulted in 10% and 20% increase in Young's modulus and tensile strength of the composite film. The electrical conductivity of the composite film containing 1 wt% GO after in situ reduction showed a remarkable increase by 6 orders of magnitude compared with the insulated BC.     

醋酸杆菌发酵生产细菌纤维素的研究进展

简要介绍醋酸杆菌发酵生产纤维素研究进展,内容包括：产纤维素的微生物、醋酸菌纤维素的结构特点、生物合成途径、一般提取处理及分析测定方法、商业用途、工业化发酵生产醋酸菌纤维素过程中存在的主要问题及发展前景。     

Dual functional nisin-multi-walled carbon nanotubes coated filters for bacterial capture and inactivation

Background

Removal of pathogens from water is one way to prevent waterborne illness. In this paper, we developed dual functional carbon nanotube (CNT) modified filters for bacterial capture and inactivation, utilizing multi-walled CNTs (MWCNTs) to coat on commercially available filters and making use of the exceptional adsorption property of CNTs to adsorb a natural antimicrobial peptide-nisin on it. Two types of MWCNTs with different outer layer diameters were used (MWCNTs1: <8 nm in diameter; MWCNTs2: 10–20 nm in diameter).

Results

The thickness of MWCNT layers, surface morphology, and surface hydrophobicity of both types of MWCNT coated filters were characterized. The MWCNT coating on filters significantly increased the surface hydrophobicity. The absorption of nisin and the capture of bacterial pathogens were correlated with increased surface hydrophobicity. The MWCNTs1 and MWCNTs2 filters with 1.5 mg MWCNTs loading captured 2.44 and 3.88 log of cells, respectively, from aqueous solutions containing a total of ~10⁶ CFU/mL cells. Nisin deposit at the amount of 0.5 mg on the surfaces of MWCNT filters significantly reduced the viability of captured B. anthracis cells by 95.71–97.19 %, and inhibited the metabolic activities of the captured cells by approximately 98.3 %.

Conclusions

The results demonstrated that the MWCNT-nisin filters achieved dual functions in bacterial pathogen capture and inhibition in one single filtration step, which is potentially applicable in removing undesired microorganisms from water sources and inhibiting captured Gram positive bacteria activities.

     

Improved biological characteristics of poly(L-lactic acid) electrospun membrane by incorporation of multiwalled carbon nanotubes/hydroxyapatite nanoparticles

Significant effort has been devoted to fabricating various biomaterials to satisfy specific clinical requirements. In this study, we developed a new type of guided tissue regeneration (GTR) membrane by electrospinning a suspension consisting of poly( l-lactic acid), multiwalled carbon nanotubes, and hydroxyapatite (PLLA/MWNTs/HA). MWNTs/HA nanoparticles were uniformly dispersed in the membranes, and the degradation characteristics were far improved. Cytologic research revealed that the PLLA/MWNTs/HA membrane enhanced the adhesion and proliferation of periodontal ligament cells (PDLCs) by 30% and inhibited the adhesion and proliferation of gingival epithelial cells by 30% also, compared with the control group. After PDLCs were seeded into the PLLA/MWNTs/HA membrane, cell/membrane composites were implanted into the leg muscle pouches of immunodeficient mice. Histologic examinations showed that PDLCs attached on the membranes functioned well in vivo. This new type of membrane shows excellent dual biological functions and satisfied the requirement of the GTR technique successfully in spite of a monolayer structure. Compared with other GTR membranes on sale or in research, the membrane can simplify the manufacturing process, reduce the fabrication cost, and avoid possible mistakes in clinical application. Moreover, it does not need to be taken out after surgery. PLLA/MWNTs/HA membranes have shown great potential for GTR and tissue engineering.     

细菌纤维素的研究进展

细菌纤维素是由醋酸杆菌属、根瘤菌属、土壤杆菌属、八叠球菌属等的某些细菌在一定条件下产生的,其中最有代表性的细菌是木醋杆菌。与传统植物纤维素相比,细菌纤维素具有很高的化学纯度。主要介绍细菌纤维素性质、生物合成的方法及其在食品工业、造纸工业和作为一种生物材料在医学工程等方面的应用。     

Anaerobic digestion of cellulose by pure and mixed bacterial cultures

Summary By enrichment technique, nine anaerobic mixed bacterial cultures were isolated, five of which showed stable cellulolysis. All cultures fermented cellulose and produced different fermentative products. Mixed culture BOC 25 yielded major levels of acetate and ethanol (39.6 and 12.0 mmol/l, respectively) and minor levels of propionate (2.5 mmol/l) and digested filter paper cellulose to the extent of 32.5% w/v. BOC 25 digested cellulosic and lignocellulosic substrates and produced filter paper cellulase, carboxymethyl cellulase, Avicelase and -glucosidase. Strain DC 25, a cellulolyticClostridium was purified from one of the mixed cultures. The fermentation products of DC 25 from cellulose, cellobiose or glucose were ethanol, acetate, formate, H₂ and CO₂.     

Production of bacterial cellulose by Acetobacter xylinumwith an air-lift reactor

Bacterial cellulose was produced by Acetobacter xylinum subsp. surcrofermentans BPR2001 in a 50 liter air-lift reactor using fructose as the main carbon source. When air was supplied, the production of the cellulose was only 2.3 g/l in 80 h but when O -fortified air was supplied, the cellulose concentration increased to 5.63 g/l in 28 h and the productivity of the cellulose in an air-lift reactor with O -fortified air supply was comparable to that in a mechanically agitated jar fermenter.     

Dynamic modelling of bacterial cellulose formation

The interest in cellulose produced by bacteria from surface cultures has increased steadily in recent years because of its potential for use in medicine and cosmetics. Unfortunately, the low yield of this production process has limited the commercial usefulness of bacterial cellulose. The aim of this paper is to show the effect of substrate mass transfer on the growth of the bacteria and on their physiological potential for product formation by means of a dynamic mathematical model.     

Tensile deformation of bacterial cellulose composites

The polymeric basis for the mechanical properties of primary plant cell walls has been investigated by forming analogous composites based on fermentation of the bacterium Acetobacter xylinus, either alone or in the presence of xyloglucan or pectin. Simultaneous small-angle X-ray scattering and uniaxial deformation experiments has shown how the cellulose microfibrils reorient during deformation. Despite very different stress/strain curves, the reorientation behaviour is similar, regardless of the presence or absence of xyloglucan or pectin. A simple theory has been developed to predict the orientation behaviour. This is qualitatively similar to the measured behaviour, but differs quantitatively.     

Intercellular nanotubes mediate bacterial communication

Bacteria are known to communicate primarily via secreted extracellular factors. Here we identify a previously uncharacterized type of bacterial communication mediated by nanotubes that bridge neighboring cells. Using Bacillus subtilis as a model organism, we visualized transfer of cytoplasmic fluorescent molecules between adjacent cells. Additionally, by coculturing strains harboring different antibiotic resistance genes, we demonstrated that molecular exchange enables cells to transiently acquire nonhereditary resistance. Furthermore, nonconjugative plasmids could be transferred from one cell to another, thereby conferring hereditary features to recipient cells. Electron microscopy revealed the existence of variously sized tubular extensions bridging neighboring cells, serving as a route for exchange of intracellular molecules. These nanotubes also formed in an interspecies manner, between B. subtilis and Staphylococcus aureus, and even between B. subtilis and the evolutionary distant bacterium Escherichia coli. We propose that nanotubes represent a major form of bacterial communication in nature, providing a network for exchange of cellular molecules within and between species.     

Cholesterol incorporation into bacterial membranes.

The wall-covered bacteria Micrococcus lysodeikticus, Bacillus megaterium, and Proteus mirabilis incorporated exogenous cholesterol into their cytoplasmic membrane in quantities resembling those incorporated by sterol-nonrequiring mycoplasmas. Cholesterol incorporation into the outer membrane of P. mirabilis was much more restricted than into the cytoplasmic membrane.     

Preparation of cellulose films from solution of bacterial cellulose in NMMO

Bacterial cellulose (BC) was dissolved in N-methylmorpholine N-oxide (NMMO) to prepare regenerated BC films (RBC) with phase inversion. The solubility of BC, supermolecule on structure, morphology, thermal and physical properties of the films were investigated by Fourier transform infrared spectroscopy (FT-IR), solid-state cross polarization/magic angle spinning ¹³C nuclear magnetic resonance (CP/MAS ¹³C NMR), wide-angle X-ray diffraction (WAXD), scanning electron microscope (SEM), and thermogravimetric analysis (TGA). The investigation suggested BC was dissolved completely in NMMO. From the C₆ signal shifts to the amorphous area, the crystallinity of materials decreased from 79.20% to 38.17%, and the transformation from cellulose I to II occurred. It was also found that the banded structure of the native materials was replaced by homogeneous and densified sections, so RBC films had better mechanical and barrier properties, and do thermal stability was similar to that of the native BC.     

Radiofrequency interaction with conductive colloids: Permittivity and electrical conductivity of single‐wall carbon nanotubes in saline

Conductive nanoparticles may enhance tissue heating during radiofrequency (RF) irradiation. Specific absorption rate (SAR) is known to rise with the electrical conductivity of tissue. However, no studies to date have measured the relationship between complex permittivity and nanoparticle concentration in tissue‐like samples. The complex permittivities of colloids containing single‐wall carbon nanotubes (SWCNTs) in normal (0.9%) saline were measured from 20 MHz to 1 GHz. Carbon concentrations ranged from 0 to 93 mM (0.06% volume), based on SWCNT weight per volume. Measurements were made with 0.02% Pluronic F108 surfactant added to the colloids to prevent SWCNT flocculation. The data were fit to the Cole–Cole relaxation model with an added constant phase angle element to correct for electrode polarization effects at low RF frequencies. Electrode polarization effects increased with carbon concentration. The real parts of the permittivities of the colloids increased with carbon concentration. The static conductivity rose linearly with carbon concentration, doubling from 0 to 93 mM. The SAR of the colloids is expected to increase with RF frequency, based on the properties of the imaginary part of the permittivity. Bioelectromagnetics 31:582–588, 2010. © 2010 Wiley‐Liss, Inc.