Incompatible mechanical properties in compact bone

The covariation of a number of mechanical of properties, and some physical characteristics, of compact bones from a wide range of bones were examined. Young's modulus was well predicted by a combination of mineral content and porosity. Increasing Young's modulus was associated with: increasing stress at yield, increasing bending strength, and a somewhat higher resilience, tensile strength and fatigue strength. Contrarily, in the post-yield region a higher Young's modulus (and more clearly, a higher mineral content) was associated with: a reduced work to fracture in tension, a reduced impact strength and an increased notch sensitivity in impact. Increasing porosity is associated with deleterious effects in the pre-yield region, but has little effect in the post-yield region. Bone, like many other materials, is unable to have good qualities in both the pre- and post-yield regions. Since an increase in mineral or Young's modulus is more potent, that is deleterious, in the post-yield than it is advantageous in the pre-yield region, it is likely that mineral content will be selected to be slightly lower than would be the case if it were equally potent in both regions. As is usual in biology, different adaptive extremes are incompatible.     

Early stage-stress relaxation in compact bone

The early stage of stress relaxation, up to 10 s after strain application, in compact bone was investigated in order to find the limit of the applicability of the empirical equation (Sasaki et al., 1993. Journal of Biomechanics 26, 1369-1376), E(t) = E0{A1exp[-(t/tau1)beta]+A2exp(-t/tau)}, A1+A2 = 1, 0相似文献   

The behaviour of microcracks in compact bone

This paper summarises four separate studies carried out by our group over the past number of years in the area of bone microdamage. The first study investigated the manner by which microcracks accumulate and interact with bone microstructure during fatigue testing of compact bone specimens. In a series of fatigue tests carried out at four different stress ranges between 50 and 80 MPA, crack density increased with loading cycles at a rate determined by the applied stress. Variations in the patterns of microdamage accumulation suggest that that at low stress levels, larger amounts of damage can build up without failure occurring. In a second study using a series of four-pont bending tests carried out on ovine bone samples, it was shown that bone microstructure influenced the ability of microcracks to propagate, with secondary osteons acting as barriers to crack growth. In a third study, the manner by which crack growth disrupts the canalicular processes connecting osteocytes was investigated. Analysis of individual cracks showed that disruption of the canalicular processes connecting osteocytes occurred due to shear displacement at the face of propagating microcracks, suggesting that this may play some role in the mechanism that signals bone remodelling. In a fourth in vivo study, it was shown that altering the mechanical load applied to the long bones of growing rats causes microcrack formation. In vivo microdamage was present in rats subjected to hindlimb suspension with a higher microcrack density found in the humeri than the femora. Microdamage was also found in control animals. This is the first study to demonstrate in vivo microcracks in normally loaded bones in a rat model.     

Cytogenetic study of Cercopithecus wolfi, Cercopithecus erythrotis and a hybrid Cercopithecus ascanius X Cercopithecus pogonias grayi

The karyotypes of two species of Cercopithecus, C. wolfi and C. erythrotis, as well as that of a hybrid C. ascanius X C. pogonias grayi, are described and compared. The karyotype of C. erythrotis is similar to that of C. ascanius and C. cephus described previously. The karyotypes of C. wolfi and C. p. grayi differ by a single inversion. The karyotype of the hybrid shows that the two parental species differ by five rearrangements, three fissions and two inversions, an observation in agreement with our previous interpretation.     

The fatigue strength of compact bone in torsion

We have conducted a series of fatigue tests on samples of bovine compact bone loaded in cyclic torsion. The fatigue strength (i.e. the range of stress needed to cause failure in a given number of cycles) was found to be lower than the fatigue strength of the same material in compression by more than a factor of two. We also tested intact chicken metatarsals and found a similar reduction in strength compared to compression testing of chicken tibiae. These results were predicted using a theoretical model in which fatigue failure was assumed to be dependent on the growth of microcracks, oriented approximately parallel to the bone's longitudinal axis but having misorientation angles of up to 30 degrees. An effective stress range was derived which is a function of the normal and shear stresses, and thus of the Mode I and Mode II stress intensities experienced by the crack. These results may have important consequences for the understanding of fatigue in bone in vivo; relatively small amounts of longitudinal shear stress, which are often ignored in analysis, may contribute significantly to fatigue failures. This may shed light on the phenomenon of stress fractures and on the need for repair and adaptation in living bone.     

Keratan sulfate proteoglycan in rabbit compact bone is bone sialoprotein II

A keratan sulfate proteoglycan was isolated under denaturing conditions from the mineral compartment of rabbit cortical bone. This small proteoglycan (Kd = 0.39 on Superose 6, Mr approximately 20,000 on sodium dodecyl sulfate gels) contained small keratan sulfate chains that were distinctly bimodal in size. The keratanase and endo-beta-galactosidase digestible glycosaminoglycan chains were O-linked to a core protein of Mr approximately 80,000. This core protein had several properties in common with the bone sialoprotein II molecule of bovine and human bone including: a closely spaced doublet band on sodium dodecyl sulfate electrophoresis gels; a high staining intensity with Stains All that was greatly diminished by neuraminidase; a significant amount of small O-linked oligosaccharides; and an amino-terminal amino acid sequence that was nearly identical to human bone sialoprotein II. (In contrast, bone sialoprotein II in human, bovine, and rat bone does not appear to have any keratan sulfate chains.) Antiserum made against the keratan sulfate proteoglycan reacted with its core protein on electrotransfers from sodium dodecyl sulfate-polyacrylamide gels.     

Changes in social dynamics associated to the menstrual cycle in the vervet monkey (Cercopithecus aethiops)

Behavioral changes associated to the menstrual cycle in a social group of vervet monkeys (Cercopithecus aethiops) were studied. Three adult females were used as experimental subjects and in these, vaginal smears were taken every other day in order to detect their menstrual cycles. Only the dominant and the mid-ranking female showed regular cycles while the low-ranking female showed amenorrhea. The menstrual cycles were divided into five periods (menstrual, premenstrual, luteal, ovulatory and follicular) which were related to the behavioral data. Social behavior recordings were taken during one hour daily for five consecutive months; the data were adjusted twice in order to follow the cycles of the females with regular menstruations. By plotting in a matrix the relative frequencies of joins and displacements, the social position of each animal as well as the group's social organization and dynamics were evaluated. A clear tendency towards social rejection (emitting less joins and increasing the amount of displacements) was detected during the premenstrual periods of the dominant female which abruptly changed towards affiliation during menstruation. This observation was detected in all group members no matter their age-sex class or social position during the five months of observation. When the data were analyzed following the mid-ranking female's cycle, no consistent changes were apparent. The importance of social stimuli in the modulation and expression of hormone-related behavior is stressed, as well as the need of using social settings in the experimental analyses of premenstrual mood and behavior disorders.     

Three-dimensional reconstruction of Haversian systems in ovine compact bone

Haversian systems or secondary osteons are an integral component of compact bone. However, as their exact shape is debatable, this study describes a technique to view their morphology in three dimensions. Bone remodeling in adult ovine long bones was labelled at intervals using a series of chelating fluorochromes. A series of longitudinal sections were cut at 25 microm intervals through blocks of the distal radius embedded in methylmethacrylate using a sledge macrotome. The chelating agents were used as markers of bone formation in the study of bone growth and osteon morphology. The two-dimensional image of each section was examined using an epifluorescence microscope. Images were transferred to a PC via a CCD low light colour video camera. Surface reference points were noted on each of the sections and, using computer software, a three-dimensional image of a refilling labelled osteon was reconstructed and its dimensions measured. Haversian systems may have a gentle spiral course along the longitudinal axis of the bone. They intertwine with adjacent osteons and give multiple branches along their course producing a complex pattern of organization. The mean labelled length and diameter of the osteons was 1.4 + 1 mm and 145 + 0.42 microm [Mean + S.D], respectively.     

Viscoelastic dissipation in compact bone: implications for stress-induced fluid flow in bone

Viscoelastic properties of wet and dry human compact bone were studied in torsion and in bending for both the longitudinal and transverse directions at frequencies from 5 mHz to 5 kHz in bending to more than 50 kHz in torsion. Two series of tests were done for different longitudinal and transverse specimens from a human tibia. Wet bone exhibited a larger viscoelastic damping tan delta (phase between stress and strain sinusoids) than dry bone over a broad range of frequency. All the results had in common a relative minimum in tan delta over a frequency range, 1 to 100 Hz, which is predominantly contained in normal activities. This behavior is inconsistent with an optimal "design" for bone as a shock absorber. There was no definitive damping peak in the range of frequencies explored, which could be attributed to fluid flow in the porosity of bone.